A new insight into LPSO phase transformation and mechanical properties uniformity of large-scale Mg-Gd-Y-Zn-Zr alloy prepared by multi-pass friction stir processing

A large-scale fine-grained Mg-Gd-Y-Zn-Zr alloy plate with high strength and ductility was successfully prepared by multi-pass friction stir processing(MFSP)technology in this work.The structure of grains and long period stacking ordered(LPSO)phase were characterized,and the mechanical properties uniformity was investigated.Moreover,a quantitative relationship between the microstructure and tensile yield strength was established.The results showed that the grains in the processed zone(PZ)and interfacial zone(IZ)were refined from 50μm to 3μm and 4μm,respectively,and numerous original LPSO phases were broken.In IZ,some block-shaped 18R LPSO phases were transformed into needle-like 14H LPSO phases due to stacking faults and the short-range diffusion of solute atoms.The severe shear deformation in the form of kinetic energy caused profuse stacking fault to be generated and move rapidly,greatly increasing the transformation rate of LPSO phase.After MFSP,the ultimate tensile strength,yield strength and elongation to failure of the large-scale plate were 367 MPa,305 MPa and 18.0% respectively.Grain refinement and LPSO phase strengthening were the major strengthening mechanisms for the MFSP sample.In particularly,the strength of IZ was comparable to that of PZ because the strength contribution of the 14H LPSO phase offsets the lack of grain refinement strengthening in IZ.This result opposes the widely accepted notion that IZ is a weak region in MFSP-prepared large-scale fine-grained plate.

On the Digital Transformation of the Automobile Manufacturing Industry in the Chengdu-Chongqing Economic Circle:Mechanism of Action and Feasible Paths

With a long industrial chain and a powerful ability to drive other industries,the automobile manufacturing industry has a prominent strategic position in the national economy.In recent years,many countries have put on their agenda the digitalization of the automobile manufacturing industry,leading to an connected,autonomous,shared,and electric(also known as CASE)①development trend in the industry.As one of the six major automobile industry clusters in China,the Chengdu-Chongqing economic circle has achieved initial results in the digital transformation of the automobile manufacturing industry.However,the region is still faced with some constraints,such as insufficient digital infrastructure,relatively slow development of new automobile products,insufficient innovation ability of the automobile industry,and complex digital transformation of small and medium-sized automobile enterprises(automobile SMEs).This paper intends to construct a framework for the mechanism of action of the digital transformation in the automobile manufacturing industry,analyze the effects of the digital transformation of the automobile manufacturing industry in the Chengdu-Chongqing economic circle,and propose feasible paths for the digital transformation of the automobile manufacturing industry in the region by drawing on domestic and international experience in this regard.The specific paths include:(a)Smoothing the“dual-core”data chain to facilitate the digital transformation of the automobile manufacturing industry;(b)Developing the new energy vehicle(NEV)industry to upgrade the quality of automobile products;(c)Achieving corner overtaking in the digital transformation of the automobile manufacturing industry with digital technology;(d)Jointly building the automobile industrial park to promote the digital transformation of the industry;(e)Addressing problems facing automobile SMEs in digital transformation via targeted policy tools.

Research on Enterprise Operation Mechanism Innovation Under Economic Transformation

With the rapid development of the market economy, complex changes have occurred in the market environment, and the competition among enterprises has become extremely fierce. The transformation of the structure of the market economy has prompted enterprises to seek for new developments and innovations. Under the background of the new economy, enterprises must begin from the perspective of internal management and internal strategic development to ensure quality enterprise operation mechanism innovation. This would help direct enterprise operation and development as well as demonstrate the value of enterprise internal management. In this way, enterprises will be able to array their overall competitiveness. This paper comprises a detailed analysis of the connotation and innovation of enterprise operation mechanism under the economic transformation, with the purpose of investigating the innovation strategy of enterprise operation mechanism under the economic transformation.

Precise regulation of the phase transformation for pyrolusite during the reduction roasting process

The mechanism involved in the phase transformation process of pyrolusite (MnO_(2)) during roasting in a reducing atmosphere was systematically elucidated in this study,with the aim of effectively using low-grade complex manganese ore resources.According to single-factor experiment results,the roasted product with a divalent manganese (Mn^(2+)) distribution rate of 95.30% was obtained at a roasting time of 25 min,a roasting temperature of 700℃,a CO concentration of 20at%,and a total gas volume of 500 mL·min^(-1),in which the manganese was mainly in the form of manganosite (MnO).Scanning electron microscopy and Brunauer–Emmett–Teller theory demonstrated the microstructural evolution of the roasted product and the gradual reduction in the pyrolusite ore from the surface to the core Thermodynamic calculations,X-ray photoelectron spectroscopy,and X-ray diffractometry analyses determined that the phase transformation of pyrolusite followed the order of MnO_(2)→Mn_(2)O_(3)→Mn_(3)O_(4)→MnO phase by phase,and the reduction of manganese oxides in each valence state proceeded simultaneously.

Insights into Formation and Li-Storage Mechanisms of Hierarchical Accordion-Shape Orthorhombic CuNb_(2)O_(6) toward Lithium-Ion Capacitors as an Anode-Active Material

The orthorhombic CuNb_(2)O_(6)(O-CNO)is established as a competitive anode for lithium-ion capacitors(LICs)owing to its attractive compositional/structural merits.However,the high-temperature synthesis(>900℃)and controversial charge-storage mechanism always limit its applications.Herein,we develop a low-temperature strategy to fabricate a nano-blocks-constructed hierarchical accordional O-CNO framework by employing multilayered Nb_(2)CT_(x)as the niobium source.The intrinsic stress-induced formation/transformation mechanism of the monoclinic CuNb_(2)O_(6)to O-CNO is tentatively put forward.Furthermore,the integrated phase conversion and solid solution lithium-storage mechanism is reasonably unveiled with comprehensive in(ex)situ characterizations.Thanks to its unique structural merits and lithium-storage process,the resulted O-CNO anode is endowed with a large capacity of 150.3 mAh g^(-1)at 2.0 A g^(-1),along with long-duration cycling behaviors.Furthermore,the constructed O-CNO-based LICs exhibit a high energy(138.9 Wh kg^(-1))and power(4.0 kW kg^(-1))densities with a modest cycling stability(15.8%capacity degradation after 3000 consecutive cycles).More meaningfully,the in-depth insights into the formation and charge-storage process here can promote the extensive development of binary metal Nb-based oxides for advanced LICs.

A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas

Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.

First-principles calculations of Ni–(Co)–Mn–Cu–Ti all-d-metal Heusler alloy on martensitic transformation,mechanical and magnetic properties

The martensitic transformation,mechanical,and magnetic properties of the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) (x=0.125,0.25,0.375,0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5)[(x=0.125,y=0.125,0.25,0.375,0.5) and (x=0.125,0.25,0.375,y=0.625)]alloys were systematically studied by the first-principles calculations.For the formation energy,the martensite is smaller than the austenite,the Ni–(Co)–Mn–Cu–Ti alloys studied in this work can undergo martensitic transformation.The austenite and non-modulated (NM) martensite always present antiferromagnetic state in the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) (y<0.625) alloys.When y=0.625 in the Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) series,the austenite presents ferromagnetic state while the NM martensite shows antiferromagnetic state.Cu doping can decrease the thermal hysteresis and anisotropy of the Ni–(Co)–Mn–Ti alloy.Increasing Mn and decreasing Ti content can improve the shear resistance and normal stress resistance,but reduce the toughness in the Ni–Mn–Cu–Ti alloy.And the ductility of the Co–Cu co-doping alloy is inferior to that of the Ni–Mn–Cu–Ti and Ni–Co–Mn–Ti alloys.The electronic density of states was studied to reveal the essence of the mechanical and magnetic properties.

MECHANISM AND KINETICS OF TRANSFORMATION OF ALUMINA INCLUSIONS BY CALCIUM TREATMENT

The basic mechanism and kinetics of the transformation process of alumina inclusions in steel was reported when calcium introduced into the steel by wire feeding orpowder injection. To clarify the mechanisms model, experiments were performed by studying reactions between AltOs and CaO in a laboratory furnace and by performing calcium treatments in an 8kg induction furnace for Al deoxidised melt. The phases formed during the reaction between Al2O3 and CaO were examined by SEM-EDS （scanning electron microscope-energy dispersive spectrometer）, and the reaction sequence of Al2O3=〉 CA6=〉 CA2 =〉 CA =〉 CAx（l） was discussed in term of the experimental observations. The kinetics of the reaction of calcium with alumina inclusions were simulated by immersing alumina plates in a Ca treated steel melt in the induction furnace. Results were compared with observations of real inclusion transformation. A kinetic model was proposed based on the results.

Post-Mesozoic Transformation of Tectonic Domain in Southeastern China and Its Geodynamic Mechanism

Since the Mesozoic and Cenozoic, a transformation from a Tethyan Himalayan tectonic domain into a circum Pacific tectonic domain from Indosinian to Yanshanian is indicated in this paper, resulting in conspicuous changes in geophysics, tectono magmatic distribution, lithofacies and paleo geography, tectonic system in southeastern China. Tectonic analysis shows that the tectonic framework resulted from the compounding, transforming and superimposing of the two tectonic domains. The geodynamic mechanism of the transformation is mainly shown as the transverse and longitudinal heterogeneity of lithosphere, and the exchange between the crust and the mantle.

Mechanism of Phase Transformation and Formation of Barium Hexafer rite Doped with Rare-Earths in Sol-Gel Process

The phase-transformation in sol-gel preparation of barium hexaferrite and the formation of barium hexaferrite doped with La 3+ were studied by chemical p hase analysis, X-ray diffraction and infrared spectrometry analysis. The expe rimental results show that phase transformation reactions of FeCO 3, Fe 2O 3 and BaFe 2O 4, barium hexaferrite and γ-Fe 2O 3 take place in the heat tr eatment of gel. While the doping lanthanide ion replace barium ion, an equivalen t quantity of Fe 3+ are reduced to Fe 2+ to maintain the charge equili brium.

A MASSIVE TRANSFORMATION MECHANISM IN Ti-48Al ALLOY

ＡＭＡＳＳＩＶＥＴＲＡＮＳＦＯＲＭＡＴＩＯＮＭＥＣＨＡＮＩＳＭＩＮＴｉ－４８ＡｌＡＬＬＯＹ￥ＷｅｎＣｕｉｅ；ＬｉｎＪｉａｎｇｕｏ；ＣｈｅｎＣｈａｎｇｑｉ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｅｒｉｎｇ，Ｂｅｉｊｉ...

Mechanism and Kinetics of Phase Transformation in Two-phase TiAl-based Alloys

The aged and quenched microstructures of both alloys, Ti-42at-%Al and Ti-45at -%Al,homogenized in the disordered single phase field. were investigated And the results show that the quinched microstructure is a supersaturated single phase of ordered 22. When the supersaturated phase is aged in the two phase range at 1273 and 1373 K, it will transform to a lamellar microstructure of γ+α2. with a discontinuous decomposition mechanism in Ti-42at-%Al alloy and a semicontinuous decomposition mechanism in T1-45at-%Al alloy. With the methods of quantitative metallograph examination and X-ray diffraction analysis. the relationship between the amount of γ, phase precipitation and the time of isothermal transformation is agreed

Mechanism on the Effect of Al upon the γ→ε Martensite Transformation in the Fe-Mn Alloys

The structure of the solid solution treated and deformed Fe-25Mn-(0-3.11)Al-0.15C alloys was examined by means of metallograph and X-ray diffraction, which has confirmed that Al restrains the γ→ε transformation in the Fe-Mn alloys. The mechanism on the restraining effect of Al has been discussed on the basis of the efFect of Al upon the stacking fault energy in the Fe-Mn alloys.Aluminium increases thermodynamically the stability of the Fe-Mn austenite and the driving force limit necessitated to be overcome for the γ→ε transformation, because the thermodynamicalcalculation indicates that Al increases the stacking fault energy in the Fe-Mn alloys at 300 K.Al will decrease the number and the size for the ε-martensite nucleus according to the stacking fault mechanism of the ε-martensite nucleation

A Discussion on the Characteristics of Tectonic Transformation and Its Mechanism of 2nd Episode of Zhu-Qiong Movement in Zhu 1 Depression, South China

Based on the detailed interpretation of high-accuracy 3D seismic data, the characteristics of regional unconformities, fracture systems, sedimentary filling and paleo-stress field in Zhu 1 depression were comprehensively analyzed. The results showed that 2nd episode of Zhu-Qiong movement was an important tectonic transformation that occurred during rifting, basin structure patterns above and below the regional angular unconformity caused by 2nd episode had distinct differences. The orientations of those basin-controlling faults changed from NE, NEE to EW, NWW, which indicated that the paleo-stress field veered from NNW extension clockwise to sub-NS extension and basin structures patterns transformed from NE, NEE strong rifting to sub-EW, NWW weak rifting. The depocenter showed seesaw-like migration from S to N. And the sedimentary systems transformed from semi-deep-deep lacustrine facies to braided river delta facies developed in shore-shallow lacustrine. Combined with its tectonic recombination of periphery plates that period, the mechanism of above tectonic transformation had direct correspondence to the readjustment of the Indian plate and the Pacific plate. The southward subduction of the pro-to-south China Sea is the direct cause of this tectonic transformation.

Transformation Mechanism of RE Slag Contaiuing Fluoride

Transformation Mechamism of RE slag containing fluoride was analyzed by using Flood’s Model.The ef-fects of slag basicity, TiO_2 content, CaF_2 content and atom ratio of O/Si+Ti+2Al on transformation of slagcontaining fluoride were also discussed.

Experimental Study of the Melting Reaction and Genetic Mechanism of Mineral Phase Transformation in Granulite Facies Metamorphism

The high-temperature and high-pressure experiment on natural block rock indicates that dehydration-melting of hydrous biotite (Bi) and partial melting of felsic minerals in garnet-biotite-plagioclase gneiss are mainly controlled by temperature, while mineral phase transformation is not only controlled by temperature-pressure conditions but also genetically associated with hydrous mineral dehydration-melting and partial melting of felsic minerals. According to the characteristics of biotite dehydration-melting and garnet transformation reaction, three stages may be distinguished: (1) when the experimental temperature is 700℃, biotite transforms to ilmenite (Ilm) + magnetite (Mt) + H2O and garnet to magnetite (Mt); (2) when the temperature is 730-760℃, biotite is dehydrated and melted and transformed into K2O-rich melt + Ilm + Mt, and garnet, into hypersthene (Hy) + cordierite (Crd); (3) when the temperature is up to or higher than 790℃, biotite is dehydrated and melted and transformed into melt + Hy + Ilm + Mt, and garnet, into the hypersthene (Hy) + spinel (Sp) + cordierite (Crd) assemblage. The melt proportion and its evolutionary characteristics are mainly controlled by dehydration-melting of hydrous minerals and partial melting of felsic minerals besides P-T conditiops: In addition to the traditional solid 4- solid (or fluid) reaction and dehydration-melting reaction, the metamorphic reaction involving melts (reaction between unmelted minerals and melts) is one of the most important reactions in granulite facies metamorphism and its attendant remelting (or regional migmatization). This experiment may provide dependable experimental data for an in-depth study of the genetic mechanism of mineral assemblage evolution and its geological dynamic significance in granulite facies metamorphism of the studied area.

Phase Transformation and Deformation Mechanism of Ti_3Al-base Alloy

The phase transformation and deformation mechanism of the alloy based on composition Ti_3Al with addition of Nb,V,Mo have been studied by use of transmission electron microscopy (TEM).It has been shown that the orientation relationship of α_2 phase transformed from β phase is:(0001)α_2// (l10)β,[1210]α_2//[111]β.The present dislocation slip systems in α_2 phase are (1100)[0001] and (1100)<1120>.There also exist α_2 twins which have new twin relationship and the twin plane is (2021).

Phase Transformation and Mechanism of Cordierite Ceramic Powders Prepared by Gangue

Cordierite ceramic powders were prepared by solid reaction at low temperatures using gangue as main starting material and adjusting component oxides in formulations. The powders were characterized by XRD, SEM and EDS. The emphasis was placed on the reaction mechanism and phase transformation of synthesized powders. The results show that cordierite ceramic powders can be synthesized at 1 150 - 1 250 % for 3 - 5 h and its morphology is irregularly granular. The synthesis temperature has an important effect on the phase transformations of powders but the reaction time only has a little effect. The impurities in gangue result in the detected secondary magnesium aluminate spinel and the decreased synthesis temperature.

Actuation Mechanism of Two-step Reverse Transformation Behavior in TiNi Alloys Deformed at Parent Phase

The actuation mechanism of TiNi shape memory alloy wires, which were deformed at parent phase followed by a cooling process under constant strain constraint, was investigated. The experimental results show that the two-step reverse martensitic transformation behavior occurs during the heating process, and the temperature range of reverse transformation was obviously widened with the increasing of prestrain. The recovery strain vs temperature curves exhibits an actuation characteristic of linear output recovery strain in a wide temperature range.

Relating mechanisms of higher education and research closely to the reality in the society for rural transformation in the <i>Amhara</i>region, Ethiopia

Higher education and research in Ethiopia is going through a decisive phase of reform and expansion. As a system it is increasingly required to respond and gear adequately to the development needs of the society and the country. This change is taking place through a government-led radical review of the system’s status and challenges, and by devising mechanisms of consensus building, as well as ownership and overcoming the resistance to change. Higher education and research institutions of Bahir Dar and Gondar Universities and ARARI, in Ethiopia are not satisfactorily responsive to rural transformation in addressing problems of small-scale farmers. This calls for responsive education and research that addresses farmers’ constraints. Thus, to survey the suitability/appropriateness of the current training programmes of higher education and research institutions to address the actual problems of farmers is of paramount importance. To this effect, tools such as interview guide, checklist and questionnaires were put to use for data collection. Primary data was collected from observation, focus group discussions and key informant interviews. Descriptive statistics for quantitative data and triangulation for qualitative data were the prime techniques for data analysis. The result of the study shows that university heads, instructors, students, research heads, researchers and employees rated the suggested mechanisms, namely “inviting speakers from industries and farming community”, “visiting guest lecturers” and “special entrepreneurial project”, as the top most important for ensuring training and research closely to the reality in the society of Amhara region in facilitating agricultural growth and rural transformation. Besides, employers and farmers responded that fresh graduates are deficient with relevant technical skills because of less emphasis on experiential learning on higher education. Therefore, the curriculum for the training should give much weight to incorporate these suggested mechanisms and the higher institutions curriculum should be arranged in such a way that the trainees could obtain appropriate technical know-how.