Wastewater, which involves easy-soluble reactive dyes, especially non-degradable dyes, is very difficult to decolor efficiently by normal processes such as coagulation process and biological treatment. The high chroma...Wastewater, which involves easy-soluble reactive dyes, especially non-degradable dyes, is very difficult to decolor efficiently by normal processes such as coagulation process and biological treatment. The high chromaticity se- riously hinders the reuse of reactive dye waste water. In this paper, a new method by bentonite adsorption and coagulation (PAC) is employed for removing color from synthetic dye waste water which contains reactive red K-2G, K-RN blue, K-GR blue, X-3B red, K-GN orange, KB-3G yellow, K-2BP red, K-RN yellow and K-6G yellow. Bentonite pre- treated by 4% CTMAB and milled to 160 order screen is proven to the best decoloring agent. For a 100 mL reactive red K-2G sample (CODcr 400 mg/L, 25 000 chromaticity color), 0.5 g bentonite pretreated and 2.5 mL PAC is enough to decolor wastewater up to 99.92% and the sediment time is short. Non-degradable dyes such as active red X-3B and K-GN orange are declored completely as well. Raw sewage (low chromaticity color) is decolored completely at a ben-tonite dosage of 0.001g. More researches prove the high practical value of this process.展开更多
In this paper, the preparation and application of copolymers of 2-acrylamido-2-methyl propane sulfo acid (AMPS) were discussed. The results showed that the copolymers with molecular weight 18.10 million can be prepare...In this paper, the preparation and application of copolymers of 2-acrylamido-2-methyl propane sulfo acid (AMPS) were discussed. The results showed that the copolymers with molecular weight 18.10 million can be prepared. In treating waste water from deinked pulp, the dosage of copolymers was 0.75ppm, the optimum dosage of PAC was 100ppm; dosage of the amphoteric polyacylamide (AmPAM) with molecular weight 11.34 million was 0.75ppm, the optimum dosage of PAC was 75ppm. The removed rate of CODcr was above 70%.展开更多
文摘Wastewater, which involves easy-soluble reactive dyes, especially non-degradable dyes, is very difficult to decolor efficiently by normal processes such as coagulation process and biological treatment. The high chromaticity se- riously hinders the reuse of reactive dye waste water. In this paper, a new method by bentonite adsorption and coagulation (PAC) is employed for removing color from synthetic dye waste water which contains reactive red K-2G, K-RN blue, K-GR blue, X-3B red, K-GN orange, KB-3G yellow, K-2BP red, K-RN yellow and K-6G yellow. Bentonite pre- treated by 4% CTMAB and milled to 160 order screen is proven to the best decoloring agent. For a 100 mL reactive red K-2G sample (CODcr 400 mg/L, 25 000 chromaticity color), 0.5 g bentonite pretreated and 2.5 mL PAC is enough to decolor wastewater up to 99.92% and the sediment time is short. Non-degradable dyes such as active red X-3B and K-GN orange are declored completely as well. Raw sewage (low chromaticity color) is decolored completely at a ben-tonite dosage of 0.001g. More researches prove the high practical value of this process.
文摘In this paper, the preparation and application of copolymers of 2-acrylamido-2-methyl propane sulfo acid (AMPS) were discussed. The results showed that the copolymers with molecular weight 18.10 million can be prepared. In treating waste water from deinked pulp, the dosage of copolymers was 0.75ppm, the optimum dosage of PAC was 100ppm; dosage of the amphoteric polyacylamide (AmPAM) with molecular weight 11.34 million was 0.75ppm, the optimum dosage of PAC was 75ppm. The removed rate of CODcr was above 70%.