Graph Attention Residual Network Based Routing and Fault-Tolerant Scheduling Mechanism for Data Flow in Power Communication Network

For permanent faults(PF)in the power communication network(PCN),such as link interruptions,the timesensitive networking(TSN)relied on by PCN,typically employs spatial redundancy fault-tolerance methods to keep service stability and reliability,which often limits TSN scheduling performance in fault-free ideal states.So this paper proposes a graph attention residual network-based routing and fault-tolerant scheduling mechanism(GRFS)for data flow in PCN,which specifically includes a communication system architecture for integrated terminals based on a cyclic queuing and forwarding(CQF)model and fault recovery method,which reduces the impact of faults by simplified scheduling configurations of CQF and fault-tolerance of prioritizing the rerouting of faulty time-sensitive(TS)flows;considering that PF leading to changes in network topology is more appropriately solved by doing routing and time slot injection decisions hop-by-hop,and that reasonable network load can reduce the damage caused by PF and reserve resources for the rerouting of faulty TS flows,an optimization model for joint routing and scheduling is constructed with scheduling success rate as the objective,and with traffic latency and network load as constraints;to catch changes in TSN topology and traffic load,a D3QN algorithm based on a multi-head graph attention residual network(MGAR)is designed to solve the problem model,where the MGAR based encoder reconstructs the TSN status into feature embedding vectors,and a dueling network decoder performs decoding tasks on the reconstructed feature embedding vectors.Simulation results show that GRFS outperforms heuristic fault-tolerance algorithms and other benchmark schemes by approximately 10%in routing and scheduling success rate in ideal states and 5%in rerouting and rescheduling success rate in fault states.

Quantum generative adversarial networks based on a readout error mitigation method with fault tolerant mechanism

Readout errors caused by measurement noise are a significant source of errors in quantum circuits,which severely affect the output results and are an urgent problem to be solved in noisy-intermediate scale quantum(NISQ)computing.In this paper,we use the bit-flip averaging(BFA)method to mitigate frequent readout errors in quantum generative adversarial networks(QGAN)for image generation,which simplifies the response matrix structure by averaging the qubits for each random bit-flip in advance,successfully solving problems with high cost of measurement for traditional error mitigation methods.Our experiments were simulated in Qiskit using the handwritten digit image recognition dataset under the BFA-based method,the Kullback-Leibler(KL)divergence of the generated images converges to 0.04,0.05,and 0.1 for readout error probabilities of p=0.01,p=0.05,and p=0.1,respectively.Additionally,by evaluating the fidelity of the quantum states representing the images,we observe average fidelity values of 0.97,0.96,and 0.95 for the three readout error probabilities,respectively.These results demonstrate the robustness of the model in mitigating readout errors and provide a highly fault tolerant mechanism for image generation models.

Application of Contact Graph Routing in Satellite Delay Tolerant Networks

Satellite networks have many inherent advantages over terrestrial networks and have become an important part of the global network infrastructure.Routing aimed at satellite networks has become a hot and challenging research topic.Satellite networks,which are special kind of Delay Tolerant Networks(DTN),can also adopt the routing solutions of DTN.Among the many routing proposals,Contact Graph Routing(CGR) is an excellent candidate,since it is designed particularly for use in highly deterministic space networks.The applicability of CGR in satellite networks is evaluated by utilizing the space oriented DTN gateway model based on OPNET(Optimized Network Engineering Tool).Link failures are solved with neighbor discovery mechanism and route recomputation.Earth observation scenario is used in the simulations to investigate CGR's performance.The results show that the CGR performances are better in terms of effectively utilizing satellite networks resources to calculate continuous route path and alternative route can be successfully calculated under link failures by utilizing fault tolerance scheme.

Fault Tolerant Control for Networked Control Systems with Packet Loss and Time Delay

In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system model.Packet loss dependent Lyapunov function is used and a fault tolerant controller is proposed respectively for arbitrary packet loss process and Markovian packet loss process.Considering a controlled plant with external energy-bounded disturbance,a robust H ∞ fault tolerant controller is designed for the NCS.These results are also expanded to the NCS with packet loss and networked-induced delay.Numerical examples are given to illustrate the effectiveness of the proposed design method.

Cooperative transmission in delay tolerant network

The delay tolerant network(DTN) is an emerging concept, which is used to describe the network, where the communication link may disrupt frequently. To cope with this problem, the DTN uses the store-carry-forward(SCF) transmission mode. With this policy, the messages in the DTN are transmitted based on the nodes' cooperation. However, the nodes may be selfish, so the source has to pay certain rewards for others to get their help. This paper studies the optimal incentive policy to maximize the source's final utility. First, it models the message spreading process as several ordinary differential equations(ODEs) based on the meanfield approximation. Then, it mathematically gets the optimal policy and explores the structure of the policy. Finally, it checks the accuracy of the ODEs model and shows the advantages of the optimal policy through simulation and theoretical results respectively.

Data-based Fault Tolerant Control for Affine Nonlinear Systems Through Particle Swarm Optimized Neural Networks

In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swarm optimization(PSO) is constructed to model the unknown system dynamics. By utilizing the estimated system states, the particle swarm optimized critic neural network(PSOCNN) is employed to solve the Hamilton-Jacobi-Bellman equation(HJBE) more efficiently.Then, a data-based FTC scheme, which consists of the NN identifier and the fault compensator, is proposed to achieve actuator fault tolerance. The stability of the closed-loop system under actuator faults is guaranteed by the Lyapunov stability theorem. Finally, simulations are provided to demonstrate the effectiveness of the developed method.

A Fault-Tolerant Mobility-Aware Caching Method in Edge Computing

Mobile Edge Computing(MEC)is a technology designed for the on-demand provisioning of computing and storage services,strategically positioned close to users.In the MEC environment,frequently accessed content can be deployed and cached on edge servers to optimize the efficiency of content delivery,ultimately enhancing the quality of the user experience.However,due to the typical placement of edge devices and nodes at the network’s periphery,these components may face various potential fault tolerance challenges,including network instability,device failures,and resource constraints.Considering the dynamic nature ofMEC,making high-quality content caching decisions for real-time mobile applications,especially those sensitive to latency,by effectively utilizing mobility information,continues to be a significant challenge.In response to this challenge,this paper introduces FT-MAACC,a mobility-aware caching solution grounded in multi-agent deep reinforcement learning and equipped with fault tolerance mechanisms.This approach comprehensively integrates content adaptivity algorithms to evaluate the priority of highly user-adaptive cached content.Furthermore,it relies on collaborative caching strategies based onmulti-agent deep reinforcement learningmodels and establishes a fault-tolerancemodel to ensure the system’s reliability,availability,and persistence.Empirical results unequivocally demonstrate that FTMAACC outperforms its peer methods in cache hit rates and transmission latency.

Considerations and Open Issues in Delay Tolerant Network’S (DTNs) Security

Delay Tolerant Network (DTN) addresses challenges of providing end-to-end service where end-to-end data forwarding paths may not exist. Security and privacy are crucial to the wide deployments of DTN. Without security and privacy guarantees, people are reluctant to accept such a new network paradigm. To address the security and privacy issues in DTNs, we in this paper have discussed the various open issues and challenges which need to be addressed to evolve the secure DTNs.

Adaptive clustering hierarchy routing for delay tolerant network

Adaptive clustering hierarchy routing(ACHR) establishes a clusters-based hierarchical hybrid routing algorithm with two-hop local visibility for delay tolerant network(DTN).The major contribution of ACHR is the combination of single copy scheme and multi-copy scheme and the combination of hop-by-hop and multi-hop mechanism ACHR,which has the advantages in simplicity,availability and well-expansibility.The result shows that it can take advantage of the random communication opportunities and local network connectivity,and achieves 1.6 times delivery ratio and 60% overhead compared with its counterpart.

Fault Tolerant Synchronization for a General Complex DynamicalNetwork with Random Delay

A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. Based on the Lyapunov stability theory and stochastic analysis, several passive fault tolerant synchronization criteria are derived,which can be described in the form of linear matrix inequalities. Finally,a numerical simulation example is carried out and the results show the validity of the proposed fault tolerant synchronization controller.

Fault-Tolerant Control Research for Networked Control System under Communication Constraints

Implementing a control system over a communication network induces inevitable time delays that may degrade performance and even cause instability. One of the most effective ways to reduce the negative effect of delays on the performance of networked control system (NCS) is to reduce network traffic. In this paper, adjustable deadbands are explored as a solution to reduce network traffic in NCS. A method of fault-tolerant control of networked control system is presented, which takes into account system response as well as network traffic. The integrity design for a kind of NCS with sensor failures and actuator failures is analyzed based on robust fault-tolerant control theory and information scheduling. After detailed theoretical analysis, the paper also provides the simulation results, which further validate the proposed scheme.

LanePost:Lane-Based Optimal Routing Protocol for Delay-Tolerant Maritime Networks

Ship.to.ship, ship.to.shore radio links empowered by Wi Fi, Wi MAX etc have been recently exploited to build maritime multi.hop mesh networks to provide internet services to on.ship users. However, because of the mobility of the vessels/ships and the large inter.ship distances, nodes in the maritime network are frequently disconnected, forcing data communication in the maritime mesh networks to be opportunistic and delay.tolerant. In this paper, we present Lane Post, an optimization approach for maritime delay.tolerant routing protocol. We exploit the shipping lane information to predict the rendezvous opportunities of the ships to optimize the route selection in delay.tolerant routing. In particular, we show that when the shipping lane information is available, an opportunistic routing graph(ORG) for each ship can be constructed to predict its multi.hop data routing opportunities to the other ships or to the shore. Based on the ORG, we develop an optimal route protocol(i.e., Lane Post) for each ship to minimize its delay of multi.hop packet delivery via dynamic programming. We discussed the ways of collecting shipping lane information by centralized method or distributed method.The proposed Lane Post protocol was evaluated by ONE, an open.source delay.tolerant network simulator, which shows its dramatic performance improvement in terms of delay reduction compared to the state.of.the.art opportunistic routing protocols.

Research on fault-tolerant control of networked control systems based on information scheduling

A kind of networked control system is studied; the networked control system with noise disturbance is modeled based on information scheduling and control co-design. Augmented state matrix analysis method is introduced, and robust fault-tolerant control problem of networked control systems with noise disturbance under actuator failures is studied. The parametric expression of the controller under actuator failures is given. Furthermore, the result is analyzed by simulation tests, which not only satisfies the networked control systems stability, but also decreases the data information number in network channel and makes full use of the network resources.

Research on robust fault-tolerant control for networked control system with packet dropout

A kind of networked control system with network-induced delay and packet dropout, modeled on asynchronous dynamical systems was tested, and the integrity design of the networked control system with sensors failures and actuators failures was analyzed using hybrid systems technique based on the robust fault-tolerant control theory. The parametric expression of controller is given based on the feasible solution of linear matrix inequality. The simulation results are provided on the basis of detailed theoretical analysis, which further demonstrate the validity of the proposed schema.

Design of Distributed Fault-Tolerant Industrial Network

A token-bus-based design method of the distributedfault-tolerant industrial network is presented in this pa-per.The dual-link network is of hot-redundancy.The performance of the network is also discussed.

Fault-tolerant topology in the wireless sensor networks for energy depletion and random failure

Nodes in the wireless sensor networks （WSNs） are prone to failure due to energy depletion and poor environment, which could have a negative impact on the normal operation of the network. In order to solve this problem, in this paper, we build a fault-tolerant topology which can effectively tolerate energy depletion and random failure. Firstly, a comprehensive failure model about energy depletion and random failure is established. Then an improved evolution model is presented to generate a fault-tolerant topology, and the degree distribution of the topology can be adjusted. Finally, the relation between the degree distribution and the topological fault tolerance is analyzed, and the optimal value of evolution model parameter is obtained. Then the target fault-tolerant topology which can effectively tolerate energy depletion and random failure is obtained. The performances of the new fault tolerant topology are verified by simulation experiments. The results show that the new fault tolerant topology effectively prolongs the network lifetime and has strong fault tolerance.

Guaranteed Cost Active Fault-tolerant Control of Networked Control System with Packet Dropout and Transmission Delay

The problem of guaranteed cost active fault-tolerant controller （AFTC） design for networked control systems （NCSs） with both packet dropout and transmission delay is studied in this paper. Considering the packet dropout and transmission delay, a piecewise constant controller is adopted. With a guaranteed cost function, optimal controllers whose number is equal to the number of actuators are designed, and the design process is formulated as a convex optimal problem that can be solved by existing software. The control strategy is proposed as follows： when actuator failures appear, the fault detection and isolation unit sends out the information to the controller choosing strategy, and then the optimal stabilizing controller with the smallest guaranteed cost value is chosen. Two illustrative examples are given to demonstrate the effectiveness of the proposed approach. By comparing with the existing methods, it can be seen that our method has a better performance.

Cache-Assign-Forward Architecture for Efficient Communication in Hybrid Delay-Tolerant Networks

Delay-Tolerant Networks (DTNs) are wireless networks that often experience temporary, even long-duration partitioning. Current DTN researches mainly focus on pure delay-tolerant networks that are extreme environments within a limited application scope. It motivates the identification of a more reasonable and valuable DTN architecture, which can be applied in a wider range of environments to achieve interoperability between some networks suffering from frequent network partitioning, and other networks provided with stable and high speed Internet access. Such hybrid delay-tolerant networks have a lot of applications in real world. A novel and practical Cache-Assign-Forward (CAF) architecture is proposed as an appropriate approach to tie together such hybrid networks to achieve an efficient and flexible data communication. Based on CAF, we enhance the existing DTN routing protocols and apply them to complex hybrid delay-tolerant networks. Simulations show that CAF can improve DTN routing performance significantly in hybrid DTN environments.

Spray and Dynamic: Advanced Routing in Delay Tolerant Networks

This paper addresses the problem of routing in delay tolerant networks (DTNs). Delay tolerant networks are wireless networks where disconnections occur frequently due to mobility of nodes, failures of energy, the low density of nodes, or when the network extends over long distances. In these cases, traditional routing protocols that have been developed for mobile ad hoc networks prove to be ineffective to the extent of transmitting messages between nodes. To resolve this problem and improve the performance of routing in delay tolerant networks we propose a new routing protocol called Spray and Dynamic;this approach represents an improvement of the spray and wait protocol by combining it with the two protocols: MaxProp and the model of “transfer by delegation” (Custody Transfer). To implement our approach Spray and Dynamic, we have developed a DTN simulator according to DTN network architecture.