Diagnosis of the Kinetic Energy of the“21·7”Extreme Torrential Rainfall Event in Henan Province,China

An extreme torrential rain(ETR)event occurred in Henan Province,China,during 18-21 July 2021.Based on hourly rain-gauge observations and ERA5 reanalysis data,the ETR was studied from the perspective of kinetic energy(K),which can be divided into rotational wind(V_(R))kinetic energy(K_(R)),divergent wind kinetic energy(K_(D)),and the kinetic energy of the interaction between the divergent and rotational winds(K_(RD)).According to the hourly precipitation intensity variability,the ETR process was divided into an initial stage,a rapid increase stage,and maintenance stage.Results showed that the intensification and maintenance of ETR were closely related to the upper-level K,and most closely related to the upperlevel K_(R),with a correlation coefficient of up to 0.9.In particular,the peak value of hourly rainfall intensity lagged behind the K_(R) by 8 h.Furthermore,diagnosis showed that K transformation from unresolvable to resolvable scales made the ETR increase slowly.The meridional rotational wind(u_(R))and meridional gradient of the geopotential(φ)jointly determined the conversion of available potential energy(APE)to K_(R) through the barotropic process,which dominated the rapid enhancement of K_(R) and then caused the rapid increase in ETR.The transportation of K by rotational wind consumed K_(R),and basically offset the K_(R) produced by the barotropic process,which basically kept K_(R) stable at a high value,thus maintaining the ETR.

A Study on the Learning Progressions of Understanding the Core Concepts of Kinetic Energy in High School

Learning progressions divide the logical system of a subject into ordered and continuously developing levels that are suitable for the cognitive development level of students,which plays an important role in understanding students’learning process.This paper focuses on the theme of“kinetic energy”in high school physics as the research object.Firstly,the concept map was used to represent the relationship between knowledge,and then five core concepts were selected based on the opinions of high school teachers.Secondly,the test tools were compiled and tested based on the relevant test questions.Finally,the paper analyzed the results based on the Rasch model,clarified students’cognitive development level of“kinetic energy”and constructed the learning progressions of“kinetic energy”based on the logical order of subject knowledge.The research provides theoretical and methodological support for the study of other subjects and learning progressions,and provides a valuable reference for high school teachers to effectively carry out the instruction of“kinetic energy.”

Bus mass estimation algorithm based on kinetic energy theorem

Bus mass is an important factor that affects fuel consumption and one of the key input parameters associated with automatic shift and hybrid electric vehicle （HEV） energy management strategy. A city bus mass estimation method based on kinetic energy theorem was proposed in this paper. The real-time data including vehicle speed and engine torque were collected by a remote data acquisition system. The samples in the process of being accelerated were selected to conduct vehicle mass estimation at the same bus stop with the same gear. The average estimation error is 2. 92% after the verification by actual data. Compared with the method based on recursive least squares, the algorithm based on kinetic energy theorem requires less sample length and the estimation error is smaller. Therefore, the method is more suitable for the bus mass estimation. The influences of gear, rolling resistance coefficient, wind resistance coefficient and road slope on mass estimation accuracy were analyzed.

Features of eddy kinetic energy and variations of upper circulation in the South China Sea

The features of eddy kinetic energy (EKE) and the variations of upper circulation in theSouth China Sea (SCS) are discussed in this paper using geostrophic currents estimated from Maps of Sea Level Anomalies of the TOPEX/Poseidon altimetry data. A high EKE center is identified in the southeast of Vietnam coast with the highest energy level 1 400 cm2 ·s^(-2) in both summer and autumn. This high EKE center is caused by the instability of the current axis leaving the coast of Vietnam in summer and the transition of seasonal circulation patterns in autumn. There exists another high EKE region in the northeastern SCS, southwest to Taiwan Island in winter. This high EKE region is generated from the eddy activities caused by the Kuroshio intrusion and accumulates more than one third of the annual EKE, which confirms that the eddies are most active in winter. The transition of upper circulation patterns is also evidenced by the directions of the major axises of velocity variance ellipses between 10?and 14.5°N, which supports the model results reported before.

Seasonal variation of eddy kinetic energy in the South China Sea

Mesoscale eddy activity and its modulation mechanism in the South China Sea （SCS） are inves- tigated with newly reprocessed satellite altimetry observations and hydrographic data. The eddy kinetic energy （EKE） level of basin-wide averages show a distinct seasonal cycle with the maximum in August-December and the minimum in February-May. Furthermore, the seasonal pattern of EKE in the basin is dominated by region offshore of central Vietnam （OCV）, southwest of Taiwan Island （SWT）, and southwest of Luzon （SWL）, which are also the breeding grounds of mesoscale eddies in the SCS. Instability theory analysis suggests that the seasonal cycle of EKE is modulated by the baroclinic instability of the mean flow. High eddy growth rate （EGR） is found in the active eddy regions. Vertical velocity shear in the upper 50-500 m is crucial for the growth of baroclinic instability, leading to seasonal EKE evolution in the SCS.

Solar energy conversion on g-C3N4 photocatalyst:Light harvesting,charge separation,and surface kinetics

Photocatalysis. which utilizes solar energy to trigger chemical reactions, is one of the most desirable solar-energy-conversion approaches. Graphitic carbon nitride （g-C3N4）. as an attractive metal-free photocatalyst, has drawn worldwide research interest in the area of solar energy conversion due to its easy synthesis, earth-abundant nature, physicochemical stability and visible-light-responsive properties. Over the past ten years, g-C3N4 based photocatalysts have experienced intensive exploration, and great progress has been achieved. However, the solar conversion efficiency is still far from industrial applications due to the wide bandgap, severe charge recombination, and lack of surface active sites. Many strategies have been proposed to enhance the light absorption, reduce the recombination of charge carriers and accelerate the surface kinetics. This work makes a crucial review about the main contributions of various strategies to the light harvesting, charge separation and surface kinetics of g-C3N4 photocatalyst. Furthermore, the evaluation measurements for the enhanced light harvesting, reduced charge recombination and accelerated surface kinetics will be discussed. In addition, this review proposes future trends to enhance the photocatalytic performance of g-C3N4 photocatalyst for the solar energy conversion.

Improved Soft Abrasive Flow Finishing Method Based on Turbulent Kinetic Energy Enhancing

Soft abrasive flow（SAF） finishing can process the irregular geometric surfaces, but with the matter of low processing efficiency. To address the issue, an improved SAF finishing method based on turbulent kinetic energy enhancing is proposed. A constrained flow passage with serration cross-section is constructed to increase the turbulence intensity. Taking the constrained flow passage as the objective, a two-phase fluid dynamic model is set up by using particle trajectory model and standard k-ε turbulence model, and the flow field characteristics of the flow passage are acquired. The numerical results show that the serration flow passage can enhance the turbulence intensity, uniform the particles distribution, and increase the particle concentration near the bottom wall. The observation results by particle image velocimetry（PIV） show that the internal vortex structures are formed in flow passage, and the abrasive flow takes on turbulence concentrating phenomenon in near-wall region. The finishing experiments prove that the proposed method can obtain better surface uniformity, and the processing efficiency can be improved more 35%. This research provides an abrasive flow modeling method to reveal the particle motion regulars, and canoffer references to the technical optimization of fluid-based precision processing.

Turbulence Intensity and Turbulent Kinetic Energy Parameters over a Heterogeneous Terrain of Loess Plateau

A deep understanding of turbulence structure is important for investigating the characteristics of the atmospheric boundary layer,especially over heterogeneous terrain.In the present study,turbulence intensity and turbulent kinetic energy（TKE）parameters are analyzed for different conditions with respect to stability,wind direction and wind speed over a valley region of the Loess Plateau of China during December 2003 and January 2004.The purpose of the study is to examine whether the observed turbulence intensity and TKE parameters satisfy Monin–Obukhov similarity theory（MOST）,and analyze the wind shear effect on,and thermal buoyancy function of,the TKE,despite the terrain heterogeneity.The results demonstrate that the normalized intensity of turbulence follows MOST for all stability in the horizontal and vertical directions,as well as the normalized TKE in the horizontal direction.The shear effect of the wind speed in the Loess Plateau region is strong in winter and could enhance turbulence for all stability conditions.During daytime,the buoyancy and shear effect together constitute the generation of TKE under unstable conditions.At night,the contribution of buoyancy to TKE is relatively small,and mechanical shearing is the main production form of turbulence.

Eddy Kinetic Energy Study of the Snowstorm over Southern China in January 2008

The energetics of the third stage of a snowstorm over China was analyzed using ECWMF data.The analysis of the energy budget for the Middle East trough and the western Pacific trough that developed toward China on 25-28 January 2008 showed the advection of the geopotential by the ageostrophic wind to be both a crucial source and the primary sink of the eddy kinetic energy centers associated with the troughs.The magnitudes of the energy conversion terms,interaction kinetic energy conversion and baroclinic conversion,were too small to explain the development of the energy centers and the jet streaks.The energy centers gained energy at their entrance regions via the convergence of the ageostrophic geopotential fluxes,and then lost energy at their exit regions by the same fluxes.At the entrance regions,the fluxes converged,increasing the geopotential gradient,which generated a stronger geostrophic wind and higher kinetic energy,resulting in an ascending motion in this area.When the troughs moved to China,the ascending motion caused by the convergence of the fluxes at entrance region intensified the snowstorms over central and southern China.

Effect of REs(Y,Nd)addition on high temperature oxidation kinetics,oxide layer characteristic and activation energy of AZ80 alloy

The oxidation behaviors of AZ80,AZ8O-0.32 Y and AZ8O-0.38 Nd(wt.%)alloys were researched at 413℃,420℃,427v and 433℃for up to 6 h in air environment via a high precision analytical balance,a laser confocal microscope,differential scanning calorimeter(DSC)analysis,X-ray diffraction(XRD)analysis,scanning electron microscope(SEM)observation,and X-ray photoelectron spectroscopy(XPS)analysis.The results show that the weight gain and oxidation rate of AZ80 are reduced significantly,the initiation form and propagation of cracks in oxide layer are changed.Compact and protective oxide layer forms on alloy surface with Y or Nd addition.And the activation energies of AZ80,AZ80-0.32Y and AZ8O-0.38Nd alloys calculated via Arrhenius equation are 82.556 kJ/mol,177.148kJ/mol and 136.738 kJ/mol,respectively.

A nonlinear creep model for surrounding rocks of tunnels based on kinetic energy theorem

The initiating condition for the accelerated creep of rocks has caused difficulty in analyzing the whole creep process.Moreover,the existing Nishihara model has evident shortcomings in describing the accelerated creep characteristics of the viscoplastic stage from the perspective of internal energy to analyze the mechanism of rock creep failure and determine the threshold of accelerated creep initiation.Based on the kinetic energy theorem,Perzyna viscoplastic theory,and the Nishihara model,a unified creep constitutive model that can describe the whole process of decaying creep,stable creep,and accelerated creep is established.Results reveal that the energy consumption and creep damage in the process of creep loading mainly come from the internal energy changes of geotechnical materials.The established creep model can not only describe the viscoelasticeplastic creep characteristics of rock,but also reflect the relationship between rock energy and creep deformation change.In addition,the research results provide a new method for determining the critical point of creep deformation and a new idea for studying the creep model and creep mechanical properties.

C haracteristics of turbulent kinetic energy dissipation rate and turbidity near the coast of East China Sea

The East China Sea(ECS) has a high suspended-sediment concentration because of the influence of the Changjiang River,indicated by high turbidity in the water.Considering the islands off the coast and the complex topography,and the strong influence of tides and wind,the coast off the ECS is a typical region with strong oceanic mixing processes.The changes in the dynamic processes near the bottom play an important role in the control of water turbidity.The turbulent kinetic energy dissipation rate(ε) is a parameter that shows the strength of ocean mixing.This is estimated based on a structure method using current velocity that is measured by a high-frequency Acoustic Doppler Current Profiler(ADCP) from a seafloor observatory in the ECS.The results indicate strong ocean mixing processes with a mean e value of 5.7×10^(-5) W/kg and distinct tidal variations in the dissipation rate.Conversely,the variation of the water turbidity leads to changes in the water dynamical structure near the bottom.Comparing the dissipation rate with the turbidity near the bottom boundary layer,we find that the high turbidity mimics strong ocean mixing.

Description of martensitic transformation kinetics in Fe-C-X(X = Ni,Cr,Mn,Si) system by a modified model

Controlling the content of athermal martensite and retained austenite is important to improving the mechanical properties of high-strength steels,but a mechanism for the accurate description of martensitic transformation during the cooling process must be addressed.At present,frequently used semi-empirical kinetics models suffer from huge errors at the beginning of transformation,and most of them fail to exhibit the sigmoidal shape characteristic of transformation curves.To describe the martensitic transformation process accurately,based on the Magee model,we introduced the changes in the nucleation activation energy of martensite with temperature,which led to the varying nucleation rates of this model during martensitic transformation.According to the calculation results,the relative error of the modified model for the martensitic transformation kinetics curves of Fe-C-X(X = Ni,Cr,Mn,Si) alloys reached 9.5% compared with those measured via the thermal expansion method.The relative error was approximately reduced by two-thirds compared with that of the Magee model.The incorporation of nucleation activation energy into the kinetics model contributes to the improvement of its precision.

Cantorian-Fractal Kinetic Energy and Potential Energy as the Ordinary and Dark Energy Density of the Cosmos Respectively

In a one-dimension Mauldin-Williams Random Cantor Set Universe, the Sigalotti topological speed of light is where . It follows then that the corresponding topological acceleration must be a golden mean downscaling of c namely . Since the maximal height in the one-dimensional universe must be where is the unit interval length and note that the topological mass (m) and topological dimension (D) where m = D = 5 are that of the largest unit sphere volume, we can conclude that the potential energy of classical mechanics translates to . Remembering that the kinetic energy is , then by the same logic we see that when m = 5 is replaced by for reasons which are explained in the main body of the present work. Adding both expressions together, we find Einstein’s maximal energy . As a general conclusion, we note that within high energy cosmology, the sharp distinction between potential energy and kinetic energy of classical mechanics is blurred on the cosmic scale. Apart of being an original contribution, the article presents an almost complete bibliography on the Cantorian-fractal spacetime theory.

KELEA (Kinetic Energy Limiting Electrostatic Attraction) Can Markedly Improve the Performance of Gasoline and Diesel Fuels in Power Generation and in Transportation

The combustion (burning) of hydrocarbon fuels comprises oxygen mediated breaking of the carbon to carbon and carbon to hydrogen chemical bonds, leading to the formation of oxygen to carbon and oxygen to hydrogen bonds;primarily as carbon dioxide and water, respectively. The oxygen gas molecules yield considerable energy during the conversion to carbon and hydrogen bound oxygen atoms. The net energy derived from hydrocarbon combustion is normally regarded as being fully converted into heat, as a form of kinetic energy. In industrial processes, some of the resulting heat is used to raise the temperature of other materials, including water for power generation. Combustion derived heat is also used to provide a localized increase in kinetic energy (pressure) of gaseous molecules that can be directly converted into mechanical work. This is the principle of combustion driven transportation and many other power generating engines. An emerging concept is that fluids can also possess a transferrable form of kinetic energy that is unrelated to heat. This newly proposed fluid associated, non-thermal kinetic energy is derived from the environment force termed KELEA (Kinetic Energy Limiting Electrostatic Attraction). KELEA results in the loosening of the hydrogen bonding between liquid molecules and probably also imparts added motion to the molecules. It is proposed that this added non-thermal kinetic energy is carried over into the combustion products, which can consequently yield increased mechanical work. KELEA also seemingly allows for more complete combustion with reduced levels of unburnt hydrocarbons. KELEA activation of liquid fuels can be accomplished using KELEA attracting and transmitting compounds, including activated fluids, either added into or placed in close proximity to the fuel. KELEA activation of fuels, including gasoline and diesel, provides a simple method to significantly improve the efficiency of their use in power generation and in transportation. The studies are relevant to reducing the current worldwide levels of hydrocarbon usage and environmental pollution.

Kinetic energy and its applications in mining engineering

Reduction of energy consumption in comminution is of significant importance in mining industry. To reduce such energy consumption the energy efficiency in an individual operation such as blasting must be increased. By using both new investigations and previous experimental results, this paper demonstrates that (1) kinetic energy carried by moving fragments in rock fracture is notable and it increases with an increasing loading rate;(2) this kinetic energy can be well used in secondary fragmentation in crushing and blasting. Accordingly, part of the muck pile from previous blast should be left in front of new(bench) face in either open pit or underground blasting. If so, when new blast occurs, the fragments from the new blast will collide with the muck pile left from the previous blast, and the kinetic energy carried by the moving fragments will be partly used in their secondary fragmentation.

Dissolution mechanism and kinetics ofβ(Mg_(17)Al_(12))phases in AZ91 magnesium alloy

In this study,the phase transformations,crystallization kinetics and dissolution mechanism ofβphase(Mg_(17)Al_(12))in magnesium alloy AZ91 were investigated by optical microscopy,X-ray diffraction,differential scanning calorimetry and differential dilatometry.The results indicate that this AZ91 alloy undergoes a phase transformation during aging,a discontinuous precipitation of theβphase(Mg_(17)Al_(12))at 150℃at the grain boundaries and another continuous at 350℃within the grains.The activation energy of the dissolution reaction of theβphase(Mg_(17)Al_(12))under non-isothermal conditions is 116.781 kJ/mol,while it is 129.7383 kJ/mol under isothermal conditions.The Avrami coefficient,n,relevant for the dissolution kinetics of theβphase(Mg_(17)Al_(12))is 1.152 and 1.211 in the non-isothermal and isothermal conditions respectively.The numerical coefficients m and Avrami n are 0.993 and 1.152.

Structure and Propagation Characteristics of Climatological Mean Kinetic Energy of Disturbance of Intraseasonal Oscillation in Asian Summer Monsoon Zone

[Objective] The research aimed to study the structure and propagation characteristics of climatological mean kinetic energy of disturbance of intraseasonal oscillation in Asian summer monsoon zone. [Method] When South China Sea monsoon started to break out, the kinetic energy of intraseasonal oscillation disturbance in the monsoon zone was analyzed, especially the researches about the variation of South China Sea monsoon, the development of Indian monsoon and the advancement of East Asian monsoon. [Result] The developed process of Asian summer monsoon had the close relationship with the kinetic energy activity of 30-60 d low-frequency oscillation disturbance. The kinetic energy of disturbance explained the eruption, occurrence, development and termination of monsoon from the energy angle. It was found that the kinetic energy of disturbance in Arabian Sea zone, Bay of Bengal and South China Sea area was the strongest, especially in Arabian Sea zone. It illustrated that Arabian Sea zone (Somali jet) was the biggest energy source of Asian monsoon. The starting mark of monsoon eruption in the whole Asia was the abrupt eruption of South China Sea monsoon. The eruption of South China Sea monsoon in the middle dekad of May was the westward transmission result of kinetic energy of disturbance on the east sea surface of Philippines. The kinetic energy of disturbance in East Asian monsoon zone had the seasonal northward advancement in summer. The high kinetic energy center of disturbance in Indian monsoon zone changed from one to two. They were respectively in Arabian Sea and Bay of Bengal. [Conclusion] The research provided the theory basis for analyzing the atmospheric intraseasonal oscillation.

Are Early Embryo Cleavage Kinetics Affected by Energy Substrates in Different Culture Media?

Objective This study aimed to investigate the influence of different culture media on early embryonic cleavage kinetics using time-lapse analysis and to determine the possible relationships between energy substrates in culture media and the cleavage kinetics.Methods A total of 10021 embryos from 1310 couples were cultured in time-lapse incubators.Embryos cultured in Vitrolife media were allocated to group I,and those in COOK media to group II.Embryo cleavage time points up to the 8-cell stage(t2–t8)were observed after pronuclei fading.Results The baseline demographic features,in vitro fertilization indications,ovarian stimulation protocol,oocyte-cumulus complexes,fertilization rate,together with pregnancy and perinatal outcomes were similar(P>0.05)between groups I and II.According to the time-lapse analysis,all embryos in group I showed significantly faster cleavage speed than those in group II(P<0.05).Furthermore,there was better synchrony in division(s3)and a longer length of the third cell cycle duration(cc3)in group II.Interestingly,implanted embryos in group II showed faster cleavage speed than those in group I,especially at t4 and t7.The glucose contents and multiple major amino acids were similar between the two groups.Lactic and pyruvic acid contents were generally higher in group I than those in group II.Conclusion Because different commercial culture media may influence cleavage kinetics of embryos,it is essential for embryologists to take culture media into consideration in selecting a potential embryo when using a time-lapse system before implantation.

Kinetic Energy Budget Equations of Rotational and Divergent Flow in Terrain-following Coordinates

In this study, kinetic energy budget equations of rotational and divergent flow in pressure coordinates are derived on terrain-following coordinates. The new formulation explicitly shows the terrain effects and can be applied directly to model-simulated dynamic and thermodynamic fields on the model's original vertical grid. Such application eliminates interpolation error and avoids errors in virtual weather systems in mountainous areas. These advantages and their significance are demonstrated by a numerical study in terrain-following coordinates of a developing vortex after it moves over the Tibetan Plateau in China.