Numerical simulation of dense particle-gas two-phase flow using the minimal potential energy principle

A simulation method of dense particle-gas two-phase flow has been developed. The binding force is introduced to present the impact of particle clustering and its expression is deduced according to the principle of minimal potential energy. The cluster collision, break-up and coalescence models are proposed based on the assumption that the particle cluster are treated as one discrete phase. These models are used to numerically study the two-phase flow field in a circulating fluidized bed （CFB）. Detailed results of the cluster structure, cluster size, particle volume fraction, gas velocity, and particle velocity are obtained. The correlation between the simulation results and experimental data justifies that these models and algorithm are reasonable, and can be used to efficiently study the dense particle-gas two-phase flow.

AN ANALYTIC SOLUTION OF DENSE TWO-PHASE FLOW IN A VERTICAL PIPELINE

According to a mathematical model for dense two-phase flows presented in the previous pape[1],a dense two-phase flow in a vertical pipeline is analytically solved, and the analytic expressions of velocity of each continuous phase and dispersed phase are respectively derived. The results show that when the drag force between twophasesdepends linearly on their relative velocity, the relative velocity profile in the pipeline coincides with Darcy's law except for the thin layer region near the pipeline wall, and that the theoretical assumptions in the dense two-phase flow theory mentioned are reasonable.

A CLOSED SYSTEM OF EQUATIONS FOR DENSE TWO-PHASE FLOW AND EXPRESSIONS OF SHEARING STRESS OF DISPERSED PHA’E AT A WALL

Inthis paper, each of the two phases in dense two-phase flow is considered as continuous medium and the fundamental equations for two-phase flow arc described in Eulerian form. The generalized constitutive relation of the Bingham fluid is applied to the dispersed phase with the analysis oj physical mechanism of dense two-phase flow. The shearing stress of dispersed phase at a wall is used to give a boundary condition. Then a mathematical model for dense two-phase flow is obtained. In addition, the expressions of shearing stress of dispersed phase at a wall is derived according to the fundamental model of the friclional collision between dispersed-plutse particles and the wall.

Two-phase turbulence models for simulating dense gas-particle flows

The two-fluid model is widely adopted in simulations of dense gas-particle flows in engineering facili- ties. Present two-phase turbulence models for two-fluid modeling are isotropic. However, turbulence in actual gas-particle flows is not isotropic. Moreover, in these models the two-phase velocity correlation is closed using dimensional analysis, leading to discrepancies between the numerical results, theoretical analysis and experiments. To rectify this problem, some two-phase turbulence models were proposed by the authors and are applied to simulate dense gas-particle flows in downers, risers, and horizontal channels; Experimental results validate the simulation results. Among these models the USM-O and the two-scale USM models are shown to give a better account of both anisotropic particle turbulence and particle-particle collision using the transport equation model for the two-phase velocity correlation.

Second-order moment modeling of dispersed two-phase turbulence-Part 2-USM-Θ two-phase turbulence model and USM-SGS two-phase stress model

Dense gas-particle flows are frequently encountered in fluidized beds,riser and downer reactors,pneumatic transport and the near-wall zone of dilute gas-particle flows.Particle-particle collision plays an important role in the behavior of two-phase flows.In this paper a USM-Q two-phase turbulence model for dense gas-particle flows is proposed to account for both two-phase turbulence and inter-particle collision.For two-fluid large-eddy simulation of gas-particle flows,the author proposed a unified second-order moment(USM) two-phase SGS stress model and a two-phase k-kp SGS energy-equation stress model.The proposed models can fully account for the interaction between the gas and particle SGS stresses.

Solids Acceleration Length in a Cold Dense Transport Bed

The solids acceleration length was investigated in a cold dense transport bed （0.10 m-IDx17 m-height） with three kinds of Silica sand. The solids circulation rate （Gs） was up to 954 kg/（m2s）. The effects of operating conditions, particle properties, and riser structures on the solids acceleration length were investigated under high Gs conditions, with the effect of riser height non-negligible. The solids acceleration length increased with the increase of the riser height. Based on the experimental data, an empirical correlation was proposed to predict the solids acceleration length. Predictions of the correlation were in good agreement with the experimental data in this work and those from the literature over a wide range of Gs （18~954 kg/（m2s））.