A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorab...A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorable for both the solid-liquid synthesis and the densification of Ti3SiC2 rainies. The present work demonstrated that the temperature fluctuation synthesis/simultaneous densification process is one of the most effective and simple methods for the preparation of Ti3SiC2 bulk materials providing relatively low synthesis temperature. short reaction time; and simultaneous synthesis and densification. This work also showed the capability to control the microstructure, e.g., the preferred orientation, of the bulk Ti3SiC2 materials simply by applying the hot pressing pressure at different Stages of the temperature fluctuation process. And textured Ti3SiC2 bulk materials with {002} faces of laminated Ti3SiC2 grains normal to the hot pressing axis were prepared.展开更多
We report an improved method for the preparation of highly dense nickelate ceramics at relatively low temperature. It is found that the introduction of appropriate additives during the ball-milling process facilitates...We report an improved method for the preparation of highly dense nickelate ceramics at relatively low temperature. It is found that the introduction of appropriate additives during the ball-milling process facilitates the formation of nickelate phase through solid state reaction. Moreover, although high-purity nickelate powders can only be obtained by calcining the mixture of starting materials at temperature higher than 1100 ℃. The adoption of powders calcined at 1000 ℃, rather than those calcined at higher temperature, is conductive to the low-temperature densification of nickelate ceramics, which is attributed to the small and dispersive particles, and the solid state reaction of the residual starting materials during sintering. Compared with the conventional process, the improved method can reduce the sintering temperature of nickelate ceramics by about 100 ℃ and decrease the grain size of the obtained ceramics, and therefore makes nickelate meet the fabrication requirements of multi-layer ceramic capacitors（MLCC）.展开更多
基金the National Outstanding YOung Scientist Foundation Under Grant !No.59925208 the National Natural Science Foundation of China
文摘A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorable for both the solid-liquid synthesis and the densification of Ti3SiC2 rainies. The present work demonstrated that the temperature fluctuation synthesis/simultaneous densification process is one of the most effective and simple methods for the preparation of Ti3SiC2 bulk materials providing relatively low synthesis temperature. short reaction time; and simultaneous synthesis and densification. This work also showed the capability to control the microstructure, e.g., the preferred orientation, of the bulk Ti3SiC2 materials simply by applying the hot pressing pressure at different Stages of the temperature fluctuation process. And textured Ti3SiC2 bulk materials with {002} faces of laminated Ti3SiC2 grains normal to the hot pressing axis were prepared.
基金supported by the Natural Science Foundation of Fujian Province(2015j01231)the Chunmiao Project of Haixi Institute of Chinese Academy of Sciences(CMZX-2014-005)the National Key Research and Development Program of China(2016YFB0701003)
文摘We report an improved method for the preparation of highly dense nickelate ceramics at relatively low temperature. It is found that the introduction of appropriate additives during the ball-milling process facilitates the formation of nickelate phase through solid state reaction. Moreover, although high-purity nickelate powders can only be obtained by calcining the mixture of starting materials at temperature higher than 1100 ℃. The adoption of powders calcined at 1000 ℃, rather than those calcined at higher temperature, is conductive to the low-temperature densification of nickelate ceramics, which is attributed to the small and dispersive particles, and the solid state reaction of the residual starting materials during sintering. Compared with the conventional process, the improved method can reduce the sintering temperature of nickelate ceramics by about 100 ℃ and decrease the grain size of the obtained ceramics, and therefore makes nickelate meet the fabrication requirements of multi-layer ceramic capacitors（MLCC）.
