Objective: To assess the actual practical attitude and knowledge of dental implants among senior dental students and general dentists graduated from some Saudi and Non-Saudi dental schools. Methods: A total of 300 sen...Objective: To assess the actual practical attitude and knowledge of dental implants among senior dental students and general dentists graduated from some Saudi and Non-Saudi dental schools. Methods: A total of 300 senior dental students and general dentists participated in the study. Hard copies of the self-designed, multiple-choice questionnaires were distributed to all participants. The questionnaire consisted of 31 questions in five parts. Data were collected and analyzed using Chi-square test and t-test, where p Results: There is a statistically significant relationship between the participants’ answers, and their dental schools. Participants’ general knowledge, training, and teaching of dental implants, as well as information about restorations retained for the dental implants, were higher among participants from Saudi dental schools than participants from non-Saudi dental schools, while the information about dental implants was higher among participants from non-Saudi dental schools than participants from Saudi dental schools. Conclusion: We conclude that the actual practical attitude and knowledge of dental implants among participants in the current study was insufficient. Therefore, dental implant education in the undergraduate curricula of dental schools surveyed should be updated to include teaching, laboratory training, and preclinical and clinical training.展开更多
AIM: To assess the failure and bone-to-implant contact rate of dental implants placed on osteoporotic subjects. METHODS: Extensive examination strategies were created to classify studies for this systematic review. ME...AIM: To assess the failure and bone-to-implant contact rate of dental implants placed on osteoporotic subjects. METHODS: Extensive examination strategies were created to classify studies for this systematic review. MEDLINE(via Pub Med) and EMBASE database were examined for studies in English up to and including May 2014. The examination presented a combination of the MeS H words described as follow: "osteoporosis" or "osteopenia" or "estrogen deficiency" AND "implant" or "dental implant" or "osseointegration". Assessment of clinical and/or histological peri-implant conditions in osteoporosis subjects treated with titanium dental implants. The examination included a combination of the MeS H terms described as follow: "osteoporosis" or "osteopenia" or "estrogen deficiency" AND "implant" or "dental implant" or "osseointegration".RESULTS: Of 943 potentially eligible articles, 12 were included in the study. A total of 133 subjects with osteoporosis, 73 subjects diagnosed with osteopenia and 708 healthy subjects were assessed in this systematic review. In these subjects were installed 367, 205, 2981 dental implants in osteoporotic, osteopenic and healthy subjects, respectively. The failure rate of dental implant was 10.9% in osteoporotic subjects, 8.29% in osteopenic and 11.43% in healthy ones. Bone-to-implant contact obtained from retrieved implants ranged between 49.96% to 47.84%, for osteoporosis and non-osteoporotic subjects. CONCLUSION: Osteoporotic subjects presented higher rates of implant loss, however, there is a lower evidence to strengthen or refute the hypothesis that osteoporosis may have detrimental effects on bone healing. Consequently, final conclusions regarding the effect of osteoporosis in dental implant therapy cannot be made at this time. There are no randomized clinical trial accessible for evaluation and the retrospectivenature of the evaluated studies shall be taken in account when interpreting this study.展开更多
AIM: To discuss important characteristics of the useof dental implants in posterior quadrants and the rehabilitation planning. METHODS: An electronic search of English articles was conducted on MEDLINE(PubM ed) from 1...AIM: To discuss important characteristics of the useof dental implants in posterior quadrants and the rehabilitation planning. METHODS: An electronic search of English articles was conducted on MEDLINE(PubM ed) from 1990 up to the period of March 2014. The key terms were dental implants and posterior jaws, dental implants/treatment planning and posterior maxilla, and dental implants/treatment planning and posterior mandible. No exclusion criteria were used for the initial search. Clinical trials, randomized and non randomized studies, classical and comparative studies, multicenter studies, in vitro and in vivo studies, case reports, longitudinal studies and reviews of the literature were included in this review. RESULTS: One hundred and fifty-two articles met the inclusion criteria of treatment planning of dental implants in posterior jaw and were read in their entirety. The selected articles were categorized with respect to their context on space for restoration, anatomic considerations(bone quantity and density), radiographic techniques, implant selection(number, position, diameter and surface), tilted and pterygoid implants, short implants, occlusal considerations, and success rates of implants placed in the posterior region. The results derived from the review process were described under several different topic headings to give readers a clear overview of the literature. In general, it was observed that the use of dental implants in posterior region requires a careful treatment plan. It is important that the practitioner has knowledge about the theme to evaluate the treatment parameters. CONCLUSION: The use of implants to restore the posterior arch presents many challenges and requires a detailed treatment planning.展开更多
<b><span style="font-family:Verdana;">Introduction:</span></b><span style="font-family:Verdana;"> I Do Biotech’s implants were developed starting in 2014. Since then,...<b><span style="font-family:Verdana;">Introduction:</span></b><span style="font-family:Verdana;"> I Do Biotech’s implants were developed starting in 2014. Since then, they obtained GMP and KFDA licenses for distribution in 2015. The main objective of this paper is to determine the survival rate of I Do Biotech implants five years after the first surgery.</span><span style="font-family:Verdana;"> </span><b><span style="font-family:Verdana;">Material and Methods:</span></b><span style="font-family:Verdana;"> 1000 implants were used on 480 prosthes</span><span style="font-family:Verdana;">e</span><span style="font-family:Verdana;">s across 10 clinics on 320 healthy, non-smoker and non-diabetic patients, chosen at random, of which 160 are male and 160 female, all in the age range of 30 to 50 years old. The failure rate was studied related to the patient’s gender, the length and diameter of the implant, anatomical location, the percentage of peri-implantitis, prosthodontic failures and the patient’s quality of life.</span><span style="font-family:Verdana;"> </span><b><span style="font-family:Verdana;">Discussion:</span></b><span style="font-family:Verdana;"> The results obtained are similar to those of Van Steenberghe D. Dieter-Busenlechner, E. Serrano Catauria and far superior to those of Sáenz Guzmán. Failure rates vary greatly from study to study due to the heterogeneity of the samples in the other research papers. </span><b><span style="font-family:Verdana;">Conclusion:</span></b><span style="font-family:Verdana;"> The overall implant failure rate at 5 years is 1.7%. The factors affecting significantly the survival rate are: the implant diameter, its length and the anatomic area. Failure ratios increase significantly when the diameter or the length of the implant decrease</span><span style="font-family:Verdana;">s</span><span style="font-family:Verdana;">, and when they are placed in the posterior maxilla (up to 4.3%).</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">The rate of peri-implantitis is 5.1%. The prosthodontic failure rate is 2.91%. The improvement in quality of life and satisfaction increases with the years.</span>展开更多
Objective:This study used published studies to assess the survival rate of dental implants placed in patients with bone dysplasia of the maxillofacial region.Material and methods:An electronic search without a specifi...Objective:This study used published studies to assess the survival rate of dental implants placed in patients with bone dysplasia of the maxillofacial region.Material and methods:An electronic search without a specified date range was performed using the MEDLINE,PubMed,EMBASE,Web of Science,and Cochrane databases.No gender or age restrictions were applied.Results:Eighteen publications were found that met the study’s criteria,reporting data on 18 patients with bone dysplasia including cleidocranial dysplasia(CDD),fibrous dysplasia(FD),florid cemento-osseous dysplasia(FCOD),and odonto-maxillary segmental dysplasia(SOMD),who received a total of 130 implants,an average of 7.2 implants/patient(range 1 to 16).The mean age of the patients was 36.7 years(range 15 to 70 years).For implants placed in bone dysplasia,the survival rates were 100% for patients with CDD(n=8),FD(n=5),SOMD(n=2),FCOD with implants inserted far from the lesions(n=2)and 0% for dental implants inserted within FCOD(n=1).The mean follow-up was 38.2 months(min 6,max 60).Conclusions:Dental implants placed in patients with dysplastic bone lesions show high survival rates,similar to those in the general population for CDD,FD,and SOMD.For FCOD,the failure rate was 100%.展开更多
The ectodermal dysplasias are rare diseases with hypodontia, hypotrichosis and hypohidrosis. The subject's life is considerably constrained and this from an early age, with major difficulties for the integration a...The ectodermal dysplasias are rare diseases with hypodontia, hypotrichosis and hypohidrosis. The subject's life is considerably constrained and this from an early age, with major difficulties for the integration and acceptance of conventional prosthetic occlusal rehabilitation. The use of implants is an integral part of early treatment, in the regions of stable growth, that is to say symphysis. In two childs of 5 and 6 years we have made implant-borne prosthetic rehabilitation in the maxilla and the mandible. Aesthetic and social evaluation were positive. We have restored the normal oro-facial functions for the correct development of skeletal bases. They acted as an external fixator intraoral, stimulating the growth by the function. Our question was: can we leave a child throughout his childhood and adolescence with a not suitable removable prosthesis, under the pretext of growth unfinished?展开更多
[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] ...[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.展开更多
In this work, samples of titanium dental implants in salivary environment in the presence of certain foods were studied. 24 samples were prepared and subjected to the reactivity of certain foods for 6, 5, 6 and 7 week...In this work, samples of titanium dental implants in salivary environment in the presence of certain foods were studied. 24 samples were prepared and subjected to the reactivity of certain foods for 6, 5, 6 and 7 weeks. The ICP-MS technique was used to analyze the prepared samples. The results obtained showed no corrosion of the titanium alone in an artificial salivary medium. Significant corrosion was observed in the presence of food, which is manifested by the presence of traces of titanium in the samples.展开更多
Objective:To analyze and evaluate the clinical efficacy of different treatment options for patients with peri-implant infection.Methods:The study period was from June 2019 to June 2020.Seventy-six patients with peri-i...Objective:To analyze and evaluate the clinical efficacy of different treatment options for patients with peri-implant infection.Methods:The study period was from June 2019 to June 2020.Seventy-six patients with peri-implant infection that were treated in Stomatological Hospital of Hefei were selected as study samples.The patients were divided into a research group and a control group by random number table method in which the sample size of each group was n=38.Patients in the control group were treated with drugs combined with ultrasonic cleaning while patients in the research group were treated with guided bone regeneration combined with flap curettage.The indicators of the two groups were compared and analyzed.Results:The plaque index(PLI),probing depth(PD),and sulcus bleeding index(SBI)of the two groups after treatment were lower than those before treatment(P<0.05).There was no significant difference between the groups(P>0.05).However,the height of the implant marginal bone of the study group after treatment was higher than that of the control group(P<0.05)..Conclusion:The use of guided bone regeneration combined with flap curettage for patients with infection around dental implants promotes the fusion of bone and implants.The clinical effect was significant and this should be comprehensively promoted in medical institutions at all levels.展开更多
With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and fut...With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.展开更多
Titanium and its alloys are often used as substrates for dental implants due to their excellent mechanical properties and good biocompatibility.However,their ability to bind to neighboring bone is limited due to the l...Titanium and its alloys are often used as substrates for dental implants due to their excellent mechanical properties and good biocompatibility.However,their ability to bind to neighboring bone is limited due to the lack of biological activity.At the same time,they show poor antibacterial ability which can easily cause bacterial infection and chronic inflammation,eventually resulting in implant failure.The preparation of composite hydroxyapatite coatings with antibacterial ability can effectively figure out these concerns.In this review,the research status and development trends of antibacterial hydroxyapatite coatings constructed on titanium and its alloys are analyzed and reviewed.This review may provide valuable reference for the preparation and application of high-performance and multi-functional dental implant coatings in the future.展开更多
Background Functional reconstruction of the jaw defect due to tumor resection poses a challenging problem in maxillofacial surgery. The osteocutaneous fibula free flap in combination with simultaneous or second stage ...Background Functional reconstruction of the jaw defect due to tumor resection poses a challenging problem in maxillofacial surgery. The osteocutaneous fibula free flap in combination with simultaneous or second stage insertion of dental implants has exhibited growing popularity for such reconstructions. This study was aimed at evaluating the clinical status and the success rates of dental implants inserted in fibula-free flaps for orofacial reconstruction following ablation of tumors. Methods We conducted a clinical follow-up study based on 29 patients after oral tumor surgery, who received vascularized fibula bone grafts and endosseous implants for functional jaw reconstruction during a 5-year period. The follow-up protocol included clinical examination and radiological evaluation. The clinical records of the patients were reviewed retrospectively. Information on treatment modalities, dentition, implant parameters, and prostheses was collected and analyzed. Results In general, a high primary stability for implants placed into the free fibula grafts was achieved. The 1-year and 5-year cumulative survival rates of the implants were 96% and 91%, respectively, using the Kaplan-Meier method. The 1-year and 5-year cumulative success rates of implants respectively. The main reasons for failure of the dental proliferation. The fibula flap presents many advantages for implant-supported prosthetic rehabilitation difficult. placed into the fibula bone grafts were 95% and 87%, replants were infection, tumor recurrence and soft tissue implant placement, but its limited height sometimes makes Conclusions Vascularized fibula bone grafts provide a firm basis for the placement of dental implants in jaw reconstruction. Implants placed in fibula bone grafts were shown to integrate normally. The double-barrel technique, or increasing the height of the fibula flap by vertical distraction osteogenesis before implant placement in the mandible, is desirable from a functional and esthetic point of view.展开更多
Due to an increased risk of infection, dental implant in organ transplantation patients has long been considered questionable, particularly when the restoration is complicated. Five-year follow-up data of a 45-year-ol...Due to an increased risk of infection, dental implant in organ transplantation patients has long been considered questionable, particularly when the restoration is complicated. Five-year follow-up data of a 45-year-old liver transplant recipient with long-term immunosuppressive therapy was reported. One year after liver transplantation, 11 Br(a)nemark implants were inserted in the maxilla and mandible, using minimally invasive surgery. Oral clinical parameters included peri-implant bone absorption, probing depth, and implant mobility. The measured fifth-year parameters were within normal ranges indicating a stable osseointegration with moderate vertical bone loss. This case report suggests that immunocompromised patients can be successfully rehabilitated with dental implants through careful examination,suitable antibiotic administration, and minimally invasive dental implant procedure.展开更多
Although neurophysiological and psychophysical proof of osseoperception is accumulating, histomorphometric evidence for the neural mechanisms of functional compensation following immediate and delayed implant loading ...Although neurophysiological and psychophysical proof of osseoperception is accumulating, histomorphometric evidence for the neural mechanisms of functional compensation following immediate and delayed implant loading is still lacking. For this randomized split-mouth study, six mongrel dogs randomly received one of four treatment protocols at 36 implant-recipient sites over 16 weeks (third maxillary incisor, third and fourth mandibular premolar): immediate implant placement and immediate loading (liP+ IL); delayed implant placement and delayed loading (DIP+DL); delayed implant placement and immediate loading (DIP+IL); and natural extraction socket healing (control). Histomorphometry was performed in the peri-implant bone and soft tissues within 300 pm around the implants. Immunocytochemistry and transmission electron microscopy were used to confirm the presence of neural structures and to reveal their ultrastructural characteristics, respectively. Myelinated nerve fibres densely populated the peri-implant crestal gingival and apical regions, although they were also identified in the woven bone and in the osteons near the implant threads. Compared with the control group in the mandible, the group that received IIP+IL showed a higher innervation (in N.mm^-2, 5.94±1.12 vs. 3.15±0.63, P〈0.001) and smaller fibre diameter (in pm, 1.37±0.05 vs. 1.64±0.13, P=0.016), smaller axon diameter (in pm, 0.89±0.05 vs. 1.24±0,10, P=0.009) and g-ratio (0.64±0.04 vs. 0.76±0.05, P〈0.001) in the middle region around the implants. Compared with DIP+IL in the mandible, IIP+IL had a higher nerve density (in N.mm^-2, 13.23±2.54 vs. 9.64±1.86, P=0.027), greater fibre diameter (in pm, 1.32±0.02 vs. 1.20±0.04, P=0.021), greater axon diameter (in μm, 0.92±0.01 vs. 0.89±0.03, P=-0.035) and lower g-ratio (0.69±0.01 vs. 0.74±0.01, P=-0.033) in the apical region around the implants. It may be assumed that the treatment protocol with liP+ IL is the preferred method to allow optimized peri-implant re-innervation, but further functional measurements are still required.展开更多
BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a m...BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone width.In this case,we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone augmentation.This allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus pseudocyst.CASE SUMMARY A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior teeth.Intraoral examination showed a horizontal deficiency of the alveolar ridge contour.The height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography(CBCT).And a typical well-defined'dome-shaped'lesion in maxillary sinus was observed on CBCT imaging.The lateral bony window was prepared using a piezo-ultrasonic device,then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 mm.The space between the bony window and the alveolar ridge was filled with Bio-Oss,covered with a Bio-Gide collagen membrane,and subsequently sutured.Nine months later,the patient’s bone width increased from 4.8 to 10.5 mm,and the bone height increased from 3.6 to 15.6 mm.Subsequently,a Straumann^(■)4.1 mm×10 mm implant was placed.The final all-ceramic crown restoration was completed four months later,and both clinical and radiographic examinations showed that the implant was successful,and the patient was satisfied with the results.CONCLUSION The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.展开更多
Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bon...Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bone;and 4) Osteotomy execution time. Materials and Methods: This article examines the heat produced by drills during osteotomy, focusing on the effect of the following factors: drilling technique;volume of autologous bone harvested;drilling time;implant primary stability;and the percentage of osseointegrated implants after primary healing. Discussion: The four factors mentioned above are analyzed based on the data obtained for sequential, biological, and One Drill milling techniques. Conclusions: 1) One Drill is the fastest technique for performing the osteotomy;2) All techniques stay within the biological temperature range of living bone, with the lowest increase in temperature achieved using One Drill with irrigation;3) The bone harvested showed no statistically significant differences between biological milling and the One Drill technique, both far superior to the sequential technique;and 4) There is no statistically significant difference in the number of osseointegrated implants among the three techniques analyzed.展开更多
Generally being considered as a safe area for surgical approaches, the region between the mental foramina presents important anatomical structures. The objective of this study was to measure the dimensions of the geni...Generally being considered as a safe area for surgical approaches, the region between the mental foramina presents important anatomical structures. The objective of this study was to measure the dimensions of the genial plexus and its three-dimensional location in CBCT images, correlating the characteristics of this structure with dental presence, sex and age of patients. A total of 149 cone beam computer tomography (CBCT) scans of dentate (n = 74) and edentulous patients (n = 75) were selected, 59 male and 90 female, aged 18 - 86 years. Measurements of width and length of the genial canal were performed, and the shortest distances of the genial plexus were determined in relation to the alveolar bone crest, the buccal cortical bone and the base of the mandible. The results indicated significant differences between the dentate and edentulous groups for the mandibular canal length (p = 0.030), distance from alveolar crest (p < 0.001), and distance from buccal cortical bone (p < 0.001), with significantly higher values in dentate patients. As for gender, the distances between the genial plexus and the alveolar bone crest (p < 0.001) and the buccal cortical bone (p = 0.028) were significantly shorter for females. Regarding age, only the distance between the genial plexus and the alveolar crest showed a significant difference (p < 0.001), and the smallest values were measured in the older patients. It can be concluded that there are variations of the genial plexus in relation to gender, age and between edentulous and dentate patients. Therefore, the anterior region of the mandible, especially the midline should be observed with caution when undergoing surgical procedures, such as removal of bone grafts and installation of dental implants.展开更多
Background: Narrow-diameter implants (3.0 - 3.5 mm range) have been introduced for the replacement of teeth with insufficient bone structure and/or limited mesiodistal or interimplant spaces, and appear to offer clini...Background: Narrow-diameter implants (3.0 - 3.5 mm range) have been introduced for the replacement of teeth with insufficient bone structure and/or limited mesiodistal or interimplant spaces, and appear to offer clinical results similar to those obtained with implants of greater diameter. Studies using extra-narrow-diameter implants (2.8 mm) are scarce. Case Presentation: A 59-year-old male patient received two extra-narrow-diameter implants, 2.8 × 11 mm in the region between elements 11 and 14. Together, two 3.5 × 8.5 mm SYSTHEX®platform 4.1 implants were installed in the region of elements 15 and 16 to provide greater stability in the occlusion. Of four previous implants on the maxillary left side, one in the region between the elements 23 and 24 that was located in a very apical position and vestibularized was removed. The provisional was already installed on the elements 11, 21, and 22 with the metal cores already prepared and with the Globteck®implants in the region of the elements 23, 24, and 27. The functional and esthetic results were satisfactory. Conclusions: Insertion of extra-narrow-diameter implants of 2.8 mm in the maxillary anterior region is a reliable option in a patient with absence of elements 12 and 13, restoring masticatory function and aesthetics in the upper arch.展开更多
Chronic kidney disease (CKD) is a worldwide public health problem that is growing in prevalence and is associated with severe complications. During the progression of the disease, a majority of CKD patients suffer o...Chronic kidney disease (CKD) is a worldwide public health problem that is growing in prevalence and is associated with severe complications. During the progression of the disease, a majority of CKD patients suffer oral complications. Dental implants are currently the most reliable and successful treatment for missing teeth. However, due to complications of CKD such as infections, bone lesions, bleeding risks, and altered drug metabolism, dental implant treatment for renal failure patients on dialysis is more challenging. In this review, we have summarized the characteristics of CKD and previous publications regarding dental treatments for renal failure patients. In addition, we discuss our recent research results and clinical experience in order to provide dental implant practitioners with a clinical guideline for dental implant treatment for renal failure patients undergoing hemodialysis.展开更多
Micromotion and fretting damages at the dental implant/bone interface are neglected for the limitation of check methods, but it is particularly important for the initial success of osseointegration and the life time o...Micromotion and fretting damages at the dental implant/bone interface are neglected for the limitation of check methods, but it is particularly important for the initial success of osseointegration and the life time of dental implant. This review article describes the scientific documentation of micromotion and fretting damages on the dental implant/bone interface. The fretting amplitude is less than 30 l^m in vitroand the damage in the interface is acceptable. While in vivo, the micromotion's effect is the combination of damage in tissue level and the real biological reaction.展开更多
文摘Objective: To assess the actual practical attitude and knowledge of dental implants among senior dental students and general dentists graduated from some Saudi and Non-Saudi dental schools. Methods: A total of 300 senior dental students and general dentists participated in the study. Hard copies of the self-designed, multiple-choice questionnaires were distributed to all participants. The questionnaire consisted of 31 questions in five parts. Data were collected and analyzed using Chi-square test and t-test, where p Results: There is a statistically significant relationship between the participants’ answers, and their dental schools. Participants’ general knowledge, training, and teaching of dental implants, as well as information about restorations retained for the dental implants, were higher among participants from Saudi dental schools than participants from non-Saudi dental schools, while the information about dental implants was higher among participants from non-Saudi dental schools than participants from Saudi dental schools. Conclusion: We conclude that the actual practical attitude and knowledge of dental implants among participants in the current study was insufficient. Therefore, dental implant education in the undergraduate curricula of dental schools surveyed should be updated to include teaching, laboratory training, and preclinical and clinical training.
基金Supported by Sao Paulo Research Foundation,FAPESP,No.2008/06972-6The National Council for Scientific and Technological Development,CNPq Nos.579157/2008-3,302768/2009-2 and 473282/2007-0+1 种基金Pesq-Doc scholarship to Dr.Shibli from University of GuaruhosScholarship to Dr.Giro from University of Guarulhos
文摘AIM: To assess the failure and bone-to-implant contact rate of dental implants placed on osteoporotic subjects. METHODS: Extensive examination strategies were created to classify studies for this systematic review. MEDLINE(via Pub Med) and EMBASE database were examined for studies in English up to and including May 2014. The examination presented a combination of the MeS H words described as follow: "osteoporosis" or "osteopenia" or "estrogen deficiency" AND "implant" or "dental implant" or "osseointegration". Assessment of clinical and/or histological peri-implant conditions in osteoporosis subjects treated with titanium dental implants. The examination included a combination of the MeS H terms described as follow: "osteoporosis" or "osteopenia" or "estrogen deficiency" AND "implant" or "dental implant" or "osseointegration".RESULTS: Of 943 potentially eligible articles, 12 were included in the study. A total of 133 subjects with osteoporosis, 73 subjects diagnosed with osteopenia and 708 healthy subjects were assessed in this systematic review. In these subjects were installed 367, 205, 2981 dental implants in osteoporotic, osteopenic and healthy subjects, respectively. The failure rate of dental implant was 10.9% in osteoporotic subjects, 8.29% in osteopenic and 11.43% in healthy ones. Bone-to-implant contact obtained from retrieved implants ranged between 49.96% to 47.84%, for osteoporosis and non-osteoporotic subjects. CONCLUSION: Osteoporotic subjects presented higher rates of implant loss, however, there is a lower evidence to strengthen or refute the hypothesis that osteoporosis may have detrimental effects on bone healing. Consequently, final conclusions regarding the effect of osteoporosis in dental implant therapy cannot be made at this time. There are no randomized clinical trial accessible for evaluation and the retrospectivenature of the evaluated studies shall be taken in account when interpreting this study.
文摘AIM: To discuss important characteristics of the useof dental implants in posterior quadrants and the rehabilitation planning. METHODS: An electronic search of English articles was conducted on MEDLINE(PubM ed) from 1990 up to the period of March 2014. The key terms were dental implants and posterior jaws, dental implants/treatment planning and posterior maxilla, and dental implants/treatment planning and posterior mandible. No exclusion criteria were used for the initial search. Clinical trials, randomized and non randomized studies, classical and comparative studies, multicenter studies, in vitro and in vivo studies, case reports, longitudinal studies and reviews of the literature were included in this review. RESULTS: One hundred and fifty-two articles met the inclusion criteria of treatment planning of dental implants in posterior jaw and were read in their entirety. The selected articles were categorized with respect to their context on space for restoration, anatomic considerations(bone quantity and density), radiographic techniques, implant selection(number, position, diameter and surface), tilted and pterygoid implants, short implants, occlusal considerations, and success rates of implants placed in the posterior region. The results derived from the review process were described under several different topic headings to give readers a clear overview of the literature. In general, it was observed that the use of dental implants in posterior region requires a careful treatment plan. It is important that the practitioner has knowledge about the theme to evaluate the treatment parameters. CONCLUSION: The use of implants to restore the posterior arch presents many challenges and requires a detailed treatment planning.
文摘<b><span style="font-family:Verdana;">Introduction:</span></b><span style="font-family:Verdana;"> I Do Biotech’s implants were developed starting in 2014. Since then, they obtained GMP and KFDA licenses for distribution in 2015. The main objective of this paper is to determine the survival rate of I Do Biotech implants five years after the first surgery.</span><span style="font-family:Verdana;"> </span><b><span style="font-family:Verdana;">Material and Methods:</span></b><span style="font-family:Verdana;"> 1000 implants were used on 480 prosthes</span><span style="font-family:Verdana;">e</span><span style="font-family:Verdana;">s across 10 clinics on 320 healthy, non-smoker and non-diabetic patients, chosen at random, of which 160 are male and 160 female, all in the age range of 30 to 50 years old. The failure rate was studied related to the patient’s gender, the length and diameter of the implant, anatomical location, the percentage of peri-implantitis, prosthodontic failures and the patient’s quality of life.</span><span style="font-family:Verdana;"> </span><b><span style="font-family:Verdana;">Discussion:</span></b><span style="font-family:Verdana;"> The results obtained are similar to those of Van Steenberghe D. Dieter-Busenlechner, E. Serrano Catauria and far superior to those of Sáenz Guzmán. Failure rates vary greatly from study to study due to the heterogeneity of the samples in the other research papers. </span><b><span style="font-family:Verdana;">Conclusion:</span></b><span style="font-family:Verdana;"> The overall implant failure rate at 5 years is 1.7%. The factors affecting significantly the survival rate are: the implant diameter, its length and the anatomic area. Failure ratios increase significantly when the diameter or the length of the implant decrease</span><span style="font-family:Verdana;">s</span><span style="font-family:Verdana;">, and when they are placed in the posterior maxilla (up to 4.3%).</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">The rate of peri-implantitis is 5.1%. The prosthodontic failure rate is 2.91%. The improvement in quality of life and satisfaction increases with the years.</span>
文摘Objective:This study used published studies to assess the survival rate of dental implants placed in patients with bone dysplasia of the maxillofacial region.Material and methods:An electronic search without a specified date range was performed using the MEDLINE,PubMed,EMBASE,Web of Science,and Cochrane databases.No gender or age restrictions were applied.Results:Eighteen publications were found that met the study’s criteria,reporting data on 18 patients with bone dysplasia including cleidocranial dysplasia(CDD),fibrous dysplasia(FD),florid cemento-osseous dysplasia(FCOD),and odonto-maxillary segmental dysplasia(SOMD),who received a total of 130 implants,an average of 7.2 implants/patient(range 1 to 16).The mean age of the patients was 36.7 years(range 15 to 70 years).For implants placed in bone dysplasia,the survival rates were 100% for patients with CDD(n=8),FD(n=5),SOMD(n=2),FCOD with implants inserted far from the lesions(n=2)and 0% for dental implants inserted within FCOD(n=1).The mean follow-up was 38.2 months(min 6,max 60).Conclusions:Dental implants placed in patients with dysplastic bone lesions show high survival rates,similar to those in the general population for CDD,FD,and SOMD.For FCOD,the failure rate was 100%.
文摘The ectodermal dysplasias are rare diseases with hypodontia, hypotrichosis and hypohidrosis. The subject's life is considerably constrained and this from an early age, with major difficulties for the integration and acceptance of conventional prosthetic occlusal rehabilitation. The use of implants is an integral part of early treatment, in the regions of stable growth, that is to say symphysis. In two childs of 5 and 6 years we have made implant-borne prosthetic rehabilitation in the maxilla and the mandible. Aesthetic and social evaluation were positive. We have restored the normal oro-facial functions for the correct development of skeletal bases. They acted as an external fixator intraoral, stimulating the growth by the function. Our question was: can we leave a child throughout his childhood and adolescence with a not suitable removable prosthesis, under the pretext of growth unfinished?
文摘[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.
文摘In this work, samples of titanium dental implants in salivary environment in the presence of certain foods were studied. 24 samples were prepared and subjected to the reactivity of certain foods for 6, 5, 6 and 7 weeks. The ICP-MS technique was used to analyze the prepared samples. The results obtained showed no corrosion of the titanium alone in an artificial salivary medium. Significant corrosion was observed in the presence of food, which is manifested by the presence of traces of titanium in the samples.
基金a project titled "Effect of Systematic Health Education on Prevention of Peri-implant Diseases"。
文摘Objective:To analyze and evaluate the clinical efficacy of different treatment options for patients with peri-implant infection.Methods:The study period was from June 2019 to June 2020.Seventy-six patients with peri-implant infection that were treated in Stomatological Hospital of Hefei were selected as study samples.The patients were divided into a research group and a control group by random number table method in which the sample size of each group was n=38.Patients in the control group were treated with drugs combined with ultrasonic cleaning while patients in the research group were treated with guided bone regeneration combined with flap curettage.The indicators of the two groups were compared and analyzed.Results:The plaque index(PLI),probing depth(PD),and sulcus bleeding index(SBI)of the two groups after treatment were lower than those before treatment(P<0.05).There was no significant difference between the groups(P>0.05).However,the height of the implant marginal bone of the study group after treatment was higher than that of the control group(P<0.05)..Conclusion:The use of guided bone regeneration combined with flap curettage for patients with infection around dental implants promotes the fusion of bone and implants.The clinical effect was significant and this should be comprehensively promoted in medical institutions at all levels.
文摘With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.12272253,11632013,and 11902214)the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(Grant Nos.2021SX-AT008 and 2021SX-AT009)The support of the Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Province(Grant No.20220006)is also acknowledged with gratitude.
文摘Titanium and its alloys are often used as substrates for dental implants due to their excellent mechanical properties and good biocompatibility.However,their ability to bind to neighboring bone is limited due to the lack of biological activity.At the same time,they show poor antibacterial ability which can easily cause bacterial infection and chronic inflammation,eventually resulting in implant failure.The preparation of composite hydroxyapatite coatings with antibacterial ability can effectively figure out these concerns.In this review,the research status and development trends of antibacterial hydroxyapatite coatings constructed on titanium and its alloys are analyzed and reviewed.This review may provide valuable reference for the preparation and application of high-performance and multi-functional dental implant coatings in the future.
文摘Background Functional reconstruction of the jaw defect due to tumor resection poses a challenging problem in maxillofacial surgery. The osteocutaneous fibula free flap in combination with simultaneous or second stage insertion of dental implants has exhibited growing popularity for such reconstructions. This study was aimed at evaluating the clinical status and the success rates of dental implants inserted in fibula-free flaps for orofacial reconstruction following ablation of tumors. Methods We conducted a clinical follow-up study based on 29 patients after oral tumor surgery, who received vascularized fibula bone grafts and endosseous implants for functional jaw reconstruction during a 5-year period. The follow-up protocol included clinical examination and radiological evaluation. The clinical records of the patients were reviewed retrospectively. Information on treatment modalities, dentition, implant parameters, and prostheses was collected and analyzed. Results In general, a high primary stability for implants placed into the free fibula grafts was achieved. The 1-year and 5-year cumulative survival rates of the implants were 96% and 91%, respectively, using the Kaplan-Meier method. The 1-year and 5-year cumulative success rates of implants respectively. The main reasons for failure of the dental proliferation. The fibula flap presents many advantages for implant-supported prosthetic rehabilitation difficult. placed into the fibula bone grafts were 95% and 87%, replants were infection, tumor recurrence and soft tissue implant placement, but its limited height sometimes makes Conclusions Vascularized fibula bone grafts provide a firm basis for the placement of dental implants in jaw reconstruction. Implants placed in fibula bone grafts were shown to integrate normally. The double-barrel technique, or increasing the height of the fibula flap by vertical distraction osteogenesis before implant placement in the mandible, is desirable from a functional and esthetic point of view.
文摘Due to an increased risk of infection, dental implant in organ transplantation patients has long been considered questionable, particularly when the restoration is complicated. Five-year follow-up data of a 45-year-old liver transplant recipient with long-term immunosuppressive therapy was reported. One year after liver transplantation, 11 Br(a)nemark implants were inserted in the maxilla and mandible, using minimally invasive surgery. Oral clinical parameters included peri-implant bone absorption, probing depth, and implant mobility. The measured fifth-year parameters were within normal ranges indicating a stable osseointegration with moderate vertical bone loss. This case report suggests that immunocompromised patients can be successfully rehabilitated with dental implants through careful examination,suitable antibiotic administration, and minimally invasive dental implant procedure.
基金supported by the Natural Science Foundation of China (81000459)the Chinese Scholarship Council
文摘Although neurophysiological and psychophysical proof of osseoperception is accumulating, histomorphometric evidence for the neural mechanisms of functional compensation following immediate and delayed implant loading is still lacking. For this randomized split-mouth study, six mongrel dogs randomly received one of four treatment protocols at 36 implant-recipient sites over 16 weeks (third maxillary incisor, third and fourth mandibular premolar): immediate implant placement and immediate loading (liP+ IL); delayed implant placement and delayed loading (DIP+DL); delayed implant placement and immediate loading (DIP+IL); and natural extraction socket healing (control). Histomorphometry was performed in the peri-implant bone and soft tissues within 300 pm around the implants. Immunocytochemistry and transmission electron microscopy were used to confirm the presence of neural structures and to reveal their ultrastructural characteristics, respectively. Myelinated nerve fibres densely populated the peri-implant crestal gingival and apical regions, although they were also identified in the woven bone and in the osteons near the implant threads. Compared with the control group in the mandible, the group that received IIP+IL showed a higher innervation (in N.mm^-2, 5.94±1.12 vs. 3.15±0.63, P〈0.001) and smaller fibre diameter (in pm, 1.37±0.05 vs. 1.64±0.13, P=0.016), smaller axon diameter (in pm, 0.89±0.05 vs. 1.24±0,10, P=0.009) and g-ratio (0.64±0.04 vs. 0.76±0.05, P〈0.001) in the middle region around the implants. Compared with DIP+IL in the mandible, IIP+IL had a higher nerve density (in N.mm^-2, 13.23±2.54 vs. 9.64±1.86, P=0.027), greater fibre diameter (in pm, 1.32±0.02 vs. 1.20±0.04, P=0.021), greater axon diameter (in μm, 0.92±0.01 vs. 0.89±0.03, P=-0.035) and lower g-ratio (0.69±0.01 vs. 0.74±0.01, P=-0.033) in the apical region around the implants. It may be assumed that the treatment protocol with liP+ IL is the preferred method to allow optimized peri-implant re-innervation, but further functional measurements are still required.
文摘BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone width.In this case,we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone augmentation.This allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus pseudocyst.CASE SUMMARY A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior teeth.Intraoral examination showed a horizontal deficiency of the alveolar ridge contour.The height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography(CBCT).And a typical well-defined'dome-shaped'lesion in maxillary sinus was observed on CBCT imaging.The lateral bony window was prepared using a piezo-ultrasonic device,then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 mm.The space between the bony window and the alveolar ridge was filled with Bio-Oss,covered with a Bio-Gide collagen membrane,and subsequently sutured.Nine months later,the patient’s bone width increased from 4.8 to 10.5 mm,and the bone height increased from 3.6 to 15.6 mm.Subsequently,a Straumann^(■)4.1 mm×10 mm implant was placed.The final all-ceramic crown restoration was completed four months later,and both clinical and radiographic examinations showed that the implant was successful,and the patient was satisfied with the results.CONCLUSION The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.
文摘Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bone;and 4) Osteotomy execution time. Materials and Methods: This article examines the heat produced by drills during osteotomy, focusing on the effect of the following factors: drilling technique;volume of autologous bone harvested;drilling time;implant primary stability;and the percentage of osseointegrated implants after primary healing. Discussion: The four factors mentioned above are analyzed based on the data obtained for sequential, biological, and One Drill milling techniques. Conclusions: 1) One Drill is the fastest technique for performing the osteotomy;2) All techniques stay within the biological temperature range of living bone, with the lowest increase in temperature achieved using One Drill with irrigation;3) The bone harvested showed no statistically significant differences between biological milling and the One Drill technique, both far superior to the sequential technique;and 4) There is no statistically significant difference in the number of osseointegrated implants among the three techniques analyzed.
文摘Generally being considered as a safe area for surgical approaches, the region between the mental foramina presents important anatomical structures. The objective of this study was to measure the dimensions of the genial plexus and its three-dimensional location in CBCT images, correlating the characteristics of this structure with dental presence, sex and age of patients. A total of 149 cone beam computer tomography (CBCT) scans of dentate (n = 74) and edentulous patients (n = 75) were selected, 59 male and 90 female, aged 18 - 86 years. Measurements of width and length of the genial canal were performed, and the shortest distances of the genial plexus were determined in relation to the alveolar bone crest, the buccal cortical bone and the base of the mandible. The results indicated significant differences between the dentate and edentulous groups for the mandibular canal length (p = 0.030), distance from alveolar crest (p < 0.001), and distance from buccal cortical bone (p < 0.001), with significantly higher values in dentate patients. As for gender, the distances between the genial plexus and the alveolar bone crest (p < 0.001) and the buccal cortical bone (p = 0.028) were significantly shorter for females. Regarding age, only the distance between the genial plexus and the alveolar crest showed a significant difference (p < 0.001), and the smallest values were measured in the older patients. It can be concluded that there are variations of the genial plexus in relation to gender, age and between edentulous and dentate patients. Therefore, the anterior region of the mandible, especially the midline should be observed with caution when undergoing surgical procedures, such as removal of bone grafts and installation of dental implants.
文摘Background: Narrow-diameter implants (3.0 - 3.5 mm range) have been introduced for the replacement of teeth with insufficient bone structure and/or limited mesiodistal or interimplant spaces, and appear to offer clinical results similar to those obtained with implants of greater diameter. Studies using extra-narrow-diameter implants (2.8 mm) are scarce. Case Presentation: A 59-year-old male patient received two extra-narrow-diameter implants, 2.8 × 11 mm in the region between elements 11 and 14. Together, two 3.5 × 8.5 mm SYSTHEX®platform 4.1 implants were installed in the region of elements 15 and 16 to provide greater stability in the occlusion. Of four previous implants on the maxillary left side, one in the region between the elements 23 and 24 that was located in a very apical position and vestibularized was removed. The provisional was already installed on the elements 11, 21, and 22 with the metal cores already prepared and with the Globteck®implants in the region of the elements 23, 24, and 27. The functional and esthetic results were satisfactory. Conclusions: Insertion of extra-narrow-diameter implants of 2.8 mm in the maxillary anterior region is a reliable option in a patient with absence of elements 12 and 13, restoring masticatory function and aesthetics in the upper arch.
基金supported by grants from the National Natural Science Foundation of China(NSFC 81371173)the State Key Laboratory of Oral Diseases(SKLOD201704)+1 种基金the International Team for Implantology(Grant No.975_2014,Basel,Switzerland)the National Key R&D Program of China during the thirteenth Five-Year Plan(2016YFC1102700)
文摘Chronic kidney disease (CKD) is a worldwide public health problem that is growing in prevalence and is associated with severe complications. During the progression of the disease, a majority of CKD patients suffer oral complications. Dental implants are currently the most reliable and successful treatment for missing teeth. However, due to complications of CKD such as infections, bone lesions, bleeding risks, and altered drug metabolism, dental implant treatment for renal failure patients on dialysis is more challenging. In this review, we have summarized the characteristics of CKD and previous publications regarding dental treatments for renal failure patients. In addition, we discuss our recent research results and clinical experience in order to provide dental implant practitioners with a clinical guideline for dental implant treatment for renal failure patients undergoing hemodialysis.
基金the support of the National Natural Science Foundation of China (Nos. 81170996, 81070867, and 81100777)Sichuan Province Science and Technology Innovation Team Program (2011JTD0006)
文摘Micromotion and fretting damages at the dental implant/bone interface are neglected for the limitation of check methods, but it is particularly important for the initial success of osseointegration and the life time of dental implant. This review article describes the scientific documentation of micromotion and fretting damages on the dental implant/bone interface. The fretting amplitude is less than 30 l^m in vitroand the damage in the interface is acceptable. While in vivo, the micromotion's effect is the combination of damage in tissue level and the real biological reaction.