Damage Mechanism of Ultra-thin Asphalt Overlay(UTAO) based on Discrete Element Method

Aiming to analyze the damage mechanism of UTAO from the perspective of meso-mechanical mechanism using discrete element method(DEM),we conducted study of diseases problems of UTAO in several provinces in China,and found that aggregate spalling was one of the main disease types of UTAO.A discrete element model of UTAO pavement structure was constructed to explore the meso-mechanical mechanism of UTAO damage under the influence of layer thickness,gradation,and bonding modulus.The experimental results show that,as the thickness of UTAO decreasing,the maximum value and the mean value of the contact force between all aggregate particles gradually increase,which leads to aggregates more prone to spalling.Compared with OGFC-5 UTAO,AC-5 UTAO presents smaller maximum and average values of all contact forces,and the loading pressure in AC-5 UTAO is fully diffused in the lateral direction.In addition,the increment of pavement modulus strengthens the overall force of aggregate particles inside UTAO,resulting in aggregate particles peeling off more easily.The increase of bonding modulus changes the position where the maximum value of the tangential force appears,whereas has no effect on the normal force.

An Alternative Method for Incorporating Fiber Meshes in Complete Upper Dentures

The most commonly used material for constructing complete dentures is polymethyl methacrylate (PMMA). However, the strength characteristics of PMMA, such as impact strength and fatigue strength, are poor, and fracturing of PMMA dentures is a common problem in prosthodontic practice. Reinforcing PMMA with various materials, such as carbon fibers, glass fibers (fiberglass), and ultrahigh modulus polyethylene fibers, has been suggested to strengthen the denture-base material. A common problem encountered when packing the resin on these specimens is fiber slippage beyond the denture edges. The present study proposes an alternative method of incorporating fiber meshes into complete dentures, whereby a thin filament of self-polymerizing resin at the perimeter of the fiber mesh is produced, giving a clear and stable shape to the mesh that fits the upper jaw cast. During placement of the shaped mesh on the cast, a positive-negative relationship is created between the mesh and cast, which immobilizes the mesh during the incorporation process.

Swallowing threshold parameters of subjects with complete dentures and overdentures

Aim: To compare the chewing process and swallowing threshold parameters of subjects with complete dentures and overdentures with data obtained from subjects with complete natural dentitions. Metho-dology: The chewing process in terms of swallowing threshold parameters of four groups of subjects with complete dentures (all females) was quantified by sieving particles after chewing of an artificial test ‘food’ and compared with that of subjects with com-plete natural dentitions as a reference group (33 sub-jects). All subjects (except those of the reference group) had a complete denture in the upper jaw. Regarding the lower jaw two groups with complete dentures (with high (24 subjects), respectively low mandible (12 subjects)) and two groups with overdentures (implant-retained (22 subjects), respectively natural root supported (19 subjects)) were composed. Results: The ‘overdenture-implants’ group needed significantly more chewing cycles and time (mean: 45 cycles in 32 seconds) until ‘swallowing’ compared to the group with complete natural dentitions (mean: 26 cycles in 19 seconds until ‘swallowing’). Also the ‘complete denture-low mandible’ group needed sig-nificantly more cycles and time (mean: 52 cycles in 44 seconds) until ‘swallowing’ than the complete dentition group. In the ‘overdenture-natural roots’ group these outcomes (33 cycles in 24 seconds) were not significantly different compared with the complete dentition group. The ‘complete denture-high mandi-ble’ group (32 cycles in 26 seconds) needed not sig-nificantly more cycles until ‘swallowing’, however time until ‘swallowing’ was significantly longer com-pared to the complete dentition group. All denture groups had significantly larger mean particle sizes when ‘swallowing’ (sizes in the order of 3 mm) than the natural dentition group (about 2 mm). Conclusion: Despite efforts to compensate for a reduced chewing efficiency, subjects with complete dentures (including overdentures) had 50% larger median particle sizes when ‘swallowing’ compared to subjects with complete natural dentitions.

Class III Reversion with Immediate Complete Denture and Immediate Implant-Retained Overdenture: Case Report

With the increased life expectancy, complete dentures have been used in the treatment of edentulism progressively. It restores stomatognathic system functions, providing improvements in chewing, aesthetics, and phonetics. The aim was to report an oral rehabilitation of a patient with severe aesthetic and functional impairment, with Angle’s class III malocclusion. The patient sought the extension project of the School of Dentistry of the Federal University of Minas Gerais with aesthetic complaints. After clinical and radiographic evaluation, the proposed planning was immediate complete denture maxilla and immediate implant-retained overdenture in mandible. During clinical evaluation it was observed that the patient was Angle’s III. The rehabilitation was performed as proposed and at the end of the treatment, it was possible to revert the class III occlusal pattern to Angle’s I. The excellent maxillomandibular relationship was achieved, which ensured optimal facial aesthetics and functional condition. It was concluded that the immediate complete dentures and immediate implant-retained overdenture might be beneficial for restoring the aesthetics and function of patients with Angle’s class III malocclusion.

Biomechanical Analysis of Implant Assisted-Overdentures with Variations in the Attachments Systems

The aim of this study was to assess the stress patterns on the peri-implant zone and residual alveolar ridge in different overdenture attachment system designs by the photoelasticity method. Four attachments systems were tested: O-ring, ERA, Bar-clip, and Bar-clip/O-ring association. The prostheses were loaded with 100 N in five pre-determined points and the photoelastic model was evaluated by a circular polariscope. The anterior load, O-ring, and ERA showed better stress distribution in relation to the bars systems, which presented stress levels surrounding implants. The molar load, Bar-clip/O-ring association, presented the biggest stress concentration on the peri-implant region in relation to the others. When the second molar was loaded, there was a concentration of stress in the alveolar ridge in all situations analyzed. Within the limitation of this “in vitro” study, it could be concluded that there were biomechanical differences among the attachments systems analyzed, principally between isolated and the bars systems. The O-ring showed better stress distribution and the Bar-clip/O-ring showed higher stress concentration.

Effect of Phyllanthus emblica Linn.on Candida adhesion to oral epithelium and denture acrylic

Objective:To investigate the effect of Phyllanthus emblica(P.emblica) Linn,ethanolic extract on the adhesion of Candida albicans(C.albicans) to human buccal epithelial cells(BECs) and denture acrylic surfaces.Methods:Human BECs and transparent acrylic strips were pretreated with ethanolic extract solution of P.emblica fruits at concentration ranged from 18.7 to 300 mg/mL.After washing BECs and the strips were inoculated with three strains of C.albicans (ATCC 10281 and two clinical isolates)(10~7 cells/mL).Normal saline solution(NSS) and 0.2% chlorhexidine gluconate were used as negative and positive controls,respectively.BECs were harvested on 12μm-polycarbonate filters(Millipore,USA).The membrane filters and the strips were stained with Gram stain.Adherent yeast cells on 100 randomly selected epithelial cells and 20 randomly selected fields on each strip were counted under microscope.The statistical significance was calculated by Kruskal-Wallis and Tukey tests at a significant level of P【0.05. Results:Significant lower numbers of all strains of yeasts adhering to BECs and acrylic strips were observed after exposure to 75-300 mg/mL of plant extract compared with NSS.Conclusions: The present study demonstrates that P.emblica ethanolic extract interferes with the adhesion of C. albicans to BECs and denture acrylic surfaces in vitro.

一种P2P Service Overlay网络拓扑设计

在经典P2P网络结构中,所有节点都处于对等地位,没有考虑节点的不同处理能力,不能够保证服务的质量。本文在P2P网络中,引入服务质量属性,构造基于服务质量的Overlay子网,用来提高P2P整体网络性能,并保证单个节点的服务质量。最后给出一种在P2P网络中构造Overlay子网拓扑结构的方法,并给出了相应的实验结果。

Visualization of Disciplinary Profiles: Enhanced Science Overlay Maps

Purpose： The purpose of this study is to modernize previous work on science overlay maps by updating the underlying citation matrix, generating new clusters of scientific disciplines, enhancing visualizations, and providing more accessible means for analysts to generate their own maps Design/methodology/approach： We use the combined set of 2015 Journal Citation Reports for the Science Citation Index （n of journals = 8,778） and the Social Sciences Citation Index （n = 3,212） for a total of 11,365 journals. The set of Web of Science Categories in the Science Citation Index and the Social Sciences Citation Index increased from 224 in 2010 to 227 in 2015. Using dedicated software, a matrix of 227 × 227 cells is generated on the basis of whole-number citation counting. We normalize this matrix using the cosine function. We first develop the citing-side, cosine-normalized map using 2015 data and VOSviewer visualization with default parameter values. A routine for making overlays on the basis of the map （＂wc 15.exe＂） is available at http：//www.leydesdorff.net/wc 15/index.htm. Findings： Findings appear in the form of visuals throughout the manuscript. In Figures 1 9 we provide basemaps of science and science overlay maps for a number of companies, universities, and technologies. Research limitations： As Web of Science Categories change and/or are updated so is the need to update the routine we provide. Also, to apply the routine we provide users need access to the Web of Science. Practical implications： Visualization of science overlay maps is now more accurate and true to the 2015 Journal Citation Reports than was the case with the previous version of the routine advanced in our paper.Originality/value： The routine we advance allows users to visualize science overlay maps in VOSviewer using data from more recent Journal Citation Reports.

Influence of acrylamide monomer addition to the acrylic denture-base resins on mechanical and physical properties

The aim of the study was to evaluate the effect of adding acrylamide monomer （AAm） on the characterization, flexural strength, flexural modulus and thermal degradation temperature of poly（methyl methacrylate） （PMMA） denture-base resins. Specimens （n= 10） were fabricated from a conventional heat-activated QC-20 （Qc-） and a microwave heat-activated Acron MC （Ac-） PMMA resins. Powder/ liquid ratio followed the manufacturer＇s instructions for the control groups （Qc-c and Ac-c） and for the copolymer groups, the resins were prepared with 5% （-5）, 10% （- 10）, 15% （- 15） and 20% （-20） acrylamide contents, according to the molecular weight ratio, respectively. The flexural strength and flexural modulus were measured by a three-point bending test. The data obtained were statistically analyzed by Kruskal-Wallis test （a=O.05） to determine significant differences between the groups, The chemical structures of the resins were characterized by the nuclear magnetic resonance spectroscopy. Thermal stabilities were determined by thermogravimetric analysis （TGA） with a heating rate of 10 ~C.min-1 from 35 ~C to 600 ~C. Control groups from both acrylic resins showed the lowest flexural strength values. Qc-15 showed significant increase in the flexural strength when compared to Qc-c （P〈O.01）. Ac-10 and Ac-15 showed significance when compared to Ac-c （P〈O.01）. Acrylamide incorporation increased the elastic modulus in Qc-10, Qc-15 and Qc-20 when compared to Qc-c （P〈0.01）. Also significant increase was observed in Ac-10, Ac-15 and Ac-20 copolymer groups when compared to Ac-c （P〈0.01）. According to the 1H-nuclear magnetic resonance （NMR） results, acrylamide copolymerization was confirmed in the experimental groups. TGA results showed that the thermal stability of PMMA is increased by the insertion of AAm.

Two Cases of Severe Dementia Showing Dramatic Improvement after Denture Placement

Severe dementia, including Alzheimer’s disease, is intractable and progressive. The purpose of this study was to document the improvement observed in two cases of severe dementia after denture placement. The subjects, two women in their 70s with severe dementia, were diagnosed with Alzheimer’s disease by the medical doctors in charge of their cases. In the first case, the subject’s symptoms included severe disorientation, impaired communication, and a tendency to wander. Two weeks after a lower complete denture placement, she was able to greet others. Five weeks later, she was able to communicate and precisely read an analog clock. Her condition continued to improve for at least 3 months. In the second case, the subject’s mouth was always open. She was bedridden in a vegetative state and hardly moved, talked, or laughed;it was impossible to communicate with her. Only a few seconds after an upper complete denture placement, she started to talk, albeit unintelligibly. Two weeks after a lower complete denture placement, she could communicate normally, laugh, and walk without help. Although the underlying mechanism has not yet been clarified, the author hypothesizes that positive signals from the oral area are transferred to the brain as positive stimulation via the trigeminal nerve, the largest cranial nerve.

Inhibition of candida adhesion to denture acrylic by Boesenbergia pandurata

Objective:To investigate effect of Boesenbergia pandurata(B.pandurata) rhizome extract on adhesion of Candida albicans(C.albicans) to acrylic surface.Methods:Transparent acrylic strips were prepared and divided into three groups with pretreatment by extract solution of B. pandurata rhizome at concentration of 25,50 and 100 mg/mL,respectively.After washing, the strips were then inoculated with two strains of C.albicans(ATCC13803 and the clinical isolate)(10~7 cells/mL).Normal saline solution and 0.2%chlorhexidine gluconate were used as negative and positive controls,respectively.Stained the strips with modified Cram stain without counterstain.Adherent yeast cells were direct counted under microscope(OlympusCX31, Japan) in 20 randomly selected fields on each strip.The statistical significance was calculated by Kruskal-Wallis and Mann-Whitney non-parametric tests at a significance level of P 【 0.05.Results:Pretreatment with B.pandurata extract significantly reduced the adhesion of both strains of C.albicans to acrylic surfaces in a dose dependent manner.Conclusions: This observation indicates that B.pandurata extract has an inhibitory effect on the ability of C. albicans to adhere to denture acrylic and could be employed as an antifungal agent for preventing denture stomatitis.

非结构化P2P Overlay拓扑结构分析

一个合理的P2P overlay可以为P2P应用提供更好的支持。非结构化P2P overlay的构建比较简单随意,适合于信息发布、即时通讯等节点随时加入退出的情况。构建具有可扩展性和稳健性的网络拓扑,是非结构化P2P overlay的研究热点之一。文章首先介绍了几种典型的非结构化P2P overlay,然后与以往研究不同,通过GT-ITM建模分析了每种P2P overlay拓扑结构的性能,主要分析了不同拓扑结构节点的度、最短路径分布、节点发现概率及结构的健壮性等,该工作对构造合理的P2P overlay拓扑结构和P2P系统的研究具有重要意义。

TORSIONAL VIBRATIONS OF A RIGID CIRCULAR PLATE ON SATURATED STRATUM OVERLAYING BEDROCK

The torsional vibration of a rigid plate resting on saturated stratum overlaying bedrock has been analysed for the first time. The dynamic governing differential equations for saturated poroelastic medium are solved by employing the technology of Hankel transform. By taking into account the boundary conditions, the dual integral equations of torsional vibration of a rigid circular plate are established, which are further converted into a Fredholm integral equation of the second kind. Subsequently, the dynamic compliance coefficients of the foundation on saturated stratum, the contact shear stress under the foundation and the angular amplitude of the foundation are evaluated. Numerical results indicate that, when the dimensionless height is bigger than 5, saturated stratum overlaying bedrock can be treated as saturated half space approximately. When the dimensionless frequency is low, the permeability of the soil must be taken into account. Furthermore, when the vibration frequency is a constant, the height of the saturated stratum has a slight effect on the dimensionless contact shear stress under the foundation.

Microstructures and wear resistance of high boron and low carbon ferroalloy using hybrid powder/wire overlaying method

The high boron alloy surfacing layer was easily cracked due to its insufficient toughness by using hybrid powder/ wire overlaying method. In order to explore the cracked mechanism, the microstructures and the wear resistance of the samples with different boron contents were studied. Further, phases analysis, microhardness, macrohardness and wear test were also carried out. The boron content depended microstructures were observed. The precipitation of the Fe2B, Fe3 （ C, B）, Fe23 （C, B）6 were increased with the increase of boron content. It was found that the wear resistance was independent of the macrohardness as the macrohardness increased firstly and then remained steady at -62 HRC. However, the wear resistance was depended on the boron contents, and which increased with the increase of the boron contents. The abrasive loss mechanism changed from plastic deformation removal to fracture removal.

Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays

The capability of embedded piezoelectric wafer active sensors(PWAS)to perform in-situ nondestructive evaluation(NDE)for structural health monitoring(SHM)of reinforced concrete(RC)structures strengthened with fiber reinforced polymer(FRP)composite overlays is explored.First,the disbond detection method were developed on coupon specimens consisting of concrete blocks covered with an FRP composite layer.It was found that the presence of a disbond crack drastically changes the electromecfianical(E/M)impedance spectrum lneasurcd at the PWAS terlninals.The spectral changes depend on the distance between the PWAS and the crack tip.Second,large scale experiments were conducted on a RC beam strengthened with carbon fiber reinforced polymer(CFRP)composite overlay.The beam was subject to an accelerated fatigue load regime in a three-point bending configuration up to a total of 807,415 cycles.During these fatigue tests,the CFRP overlay experienced disbonding beginning at about 500,000 cycles.The PWAS were able to detect the disbonding before it could be reliably seen by visual inspection.Good correlation between the PWAS readings and the position and extent of disbond damage was observed.These preliminary results demonstrate the potential of PWAS technology for SHM of RC structures strengthened with FRP composite overlays.

Effect of Fe content on the friction and abrasion properties of copper base overlay on steel substrate by TIG welding

Copper base alloy was overlaid onto 35CrMnSiA steel plate by tungsten inert gas （TIG） welding method. The heat transfer process was simulated, the microstructures of the copper base overlay were analyzed by scanning electron microscopy （SEM） and energy dispersive spectrometer （EDS）, and the friction and abrasion properties of the overlay were measured. The results show that the Fe content increases in the overlay with increasing the welding current. And with the increase of Fe content in the overlay, the friction coefficient increases and the wear mechanism changes from oxidation wear to abrasive wear and plough wear, which is related to the size and quantity of Fe grains in the overlay. While with the increase of Fe content in the overlay, the protection of oxidation layer against the oxidation wear on the melted metal decreases.

Effects of plasma treatment time on modification of acrylic denture material

Objective：To study the relationship between plasma treatment time acrylic resin denture material in the size of 2 mm × 10 mm × 10 mm. and efficacy. Methods：Test specimens were prepared from an Plasma treatment was carried out on the surface of Polymethyl methacrylate（PMMA） at different time. XPS studies, IR spectra studies and measurement of wetting angle were performed. Results： XPS showed the peak corresponding to C-O getting higher as the treatment proceeded, however at 120 seconds, the peak did not increase any longer and partly crossed with the peak at the duration of 60 seconds. IR spectra showed the wave corresponding to C-H was reduced as O2-plasma treatment proceeded, and then changed little, Wetting angle initially decreased dramatically, however, as the reaction proceeded, wetting angle increased slightly. Conclusion：Equilibrium was reached for introducing oxygen-containing groups and changing of C-H. As the treatment proceeded, wetting angle increased slightly.

Investigation of the torsional deformation of the complete upper denture: A pilot study

The aim of this research is to clarify whether the midline axis of the complete upper denture (CUD) is the axis of its torsion during loading, apart from the known bending deflection. Furthermore the present study is intended to estimate the influence of the anterior notches on the torsional deformation of the CUD. Using commercial edentulous molds and standardized procedures, six identical CUDs were fabricated with an initial fraenal notch of 5 mm. Two additional notch conditions were produced by deepening the notch to a total depth of 9 mm and by creating an incisal diastema of 7 mm. Five biaxial (also known as “fish bone”) strain gauges were cemented onto the palatal section of the dentures so that their middle axis coincided with the midline axis of the outer surface of the denture. For the denture specimen used in this study, the specific point of torsion was detected 2 cm from the point of contact of the two artificial central incisors. The presence of a deep fraenal notch and the combination of the deep fraenal notch with the presence of an incisal diastema increased the torsion of the CUD to a significant level (P = 0.006 and P = 0.05, respectively). It was shown that the midline can be the CUD’s axis of torsion. Biaxial strain gauges could be a reliable method of measuring the torsional deformation of the CUD.

JXTA Overlay中节点自启动算法改进

在P2P网络中,新的节点通过连接入网点加入网络,在无法连接时,JXTA通过节点自启动策略连入网络,但目前的实现可能造成网络波动。通过改进自启动策略,充分利用边缘节点收集的集合点信息,并以PeerSim为基础进行了仿真,结果显示改进后的算法能很好的促进网络收敛,使网络快速达到稳定状态。

Maxillary denture flange and occlusal discrepancies of Vertex ThermoSens in comparison with conventional heat-cured denture base materials

This study was conducted to investigate the maxillary denture bases and occlusal discrepancies using the Vertex Thermosens in comparison with the conventional polymethyl-methacrylate materials. Twenty maxillary denture bases were prepared from the Vertex ThermoSens and a conventional heat-cured denture base materials. Acrylic maxillary second molars were arranged in their respective positions on the ridge. After curing of both types of denture bases, they were deflasked with their respective master casts. Reference points were prepared for measurements of the antero-posterior and cross-arch dimensions at the denture borders using caliper device. Furthermore, the teeth discrepancies were measured between reference points in the ligual aspect of the second maxillary molars. The recorded data was analyzed using SPSS statistical software version 20. The results showed initial shrinkage of both denture bases in the antero-posterior and cross-arch dimensions immediately after decasting. This contraction was compensated gradually during storage in water up to 2 weeks. Regarding the variable time, there was a significant difference between the tested materials. Moreover, the results revealed occlusal discrepancies and shifting of teeth inward immediately after decasting, followed by outward movement after storage in water for 2 weeks. Regarding the variables time and materials, there were significant differences. Both materials exhibited inward shrinkage in the antero-posterior and cross-arch dimensions immediately after decasting. Both denture bases showed inward shifting of teeth immediately after decasting, followed by outward movement after storage in water up to 2 weeks.