Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restric...Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.展开更多
Material distribution characteristics during sliding and depositing is particularly significative to investigate the internal structure and spatial variation of landslide dams,which are fundamentally determining the m...Material distribution characteristics during sliding and depositing is particularly significative to investigate the internal structure and spatial variation of landslide dams,which are fundamentally determining the mechanical and hydraulic behavior and the susceptibility to cause dam failure.However,limited by longevity shortages and special geographic environments,the material distribution characteristics and their formation mechanisms are difficult to observe in the field.Therefore,an experimental apparatus modeling a landslide dam was developed in this paper,designing three sampling methods with two valley states.The internal deposit characteristics,void ratio variation and relative content of the particle size range(PSR)were analyzed,and the mechanics of deposit structure were also delicately ascertained.The results indicate that granular material deposited in valley shows a structure of inverse grain size accumulation in both vertical and horizontal directions,exhibiting spatial variability of particle gradation and void ratio.The characteristic PSR decreases from 22-30 mm in the two-dimensional state to 10-14 mm in the threedimensional state.Vibration excitation and vibration sieve are the intrinsic mechanisms of granular flow segregation,intrinsically inducing the formation of inverse grading deposit structures.Consequently,spatial variability in size is mainly trig gered by segregation,whereas coarse particle content and deposition boundaries merely exacerbate the difference degree.展开更多
Extensive mass transport deposits(MTDs), which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwid...Extensive mass transport deposits(MTDs), which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwide. To date, no large-scale MTDs have been found in Chinese terrestrial basins. Based on integrated analysis of the seismic, drilling, core and logging data, this article report MTDs have been found in Songliao terrestrial basin(SLTB), Northeast China. During the depositional period of the Upper Cretaceous Qingshankou Formation, slope break of lacustrine basins was an ideal discharge place for gravity depositions. Regional sedimentary study of MTDs reveals that Cretaceous-age MTDs in SLTB were deposited in slope-break environments by slide, slump and debris flow, and MTDs were mixed with little turbidite simultaneously. Besides the massive aspect, key features of MTDs are the common presence of deformational structures or softsedimentary deformation, floating shale clasts, boudins, microfaults, distortion beddings, rotated sand debris. Detailed mapping of two three-dimensional(3-D) seismic surveys acquired in Yingtai(YT) and Haituozi(HTZ) areas reveals that MTDs are characterized by chaotic, mounded, and transparent seismic reflection. Growth fault, slope gully and geomorphology of the slope break greatly influenced the sedimentary process and external geometry of MTDs, and as a consequence, MTDs in SLTB exhibit classic fan-like geometry and some special(non-fan-like) external geometry. Furthermore, fanlike MTDs can be divided into three subcategories, including isolated fan, mother-son fan and stacked fan. Non-fan-like MTDs can be divided into two subcategories, strip-like MTDs and faulted-pit MTDs. A new sedimentary model has been built for MTDs in SLTB. MTDs have become a new exploration and development target in the SLTB.展开更多
Based upon a comprehensive study of 123 copper deposits in China. this paper reaches the following conclusions: 1. The crust in China was solidified pretty late; with the accretion of the plate, the copper mineralizat...Based upon a comprehensive study of 123 copper deposits in China. this paper reaches the following conclusions: 1. The crust in China was solidified pretty late; with the accretion of the plate, the copper mineralization moved towards its margin in space and became successively younger in age. 2. The major copper ore types ever found in the world have mostly been discovered in China, in which the porphyry type seems to be the most important and the massive sulfide type in the transitional bed between marine clastic and carbonate rocks is clearly defined. 3. Carbonate strata are widespread in China and their deposition lasted for a long geological period, so the proportion of copper deposits occurring in them is large as compared with other parts of the world. 4. Seven metallogenic epochs can be recognized, in which the Mesozoic one plays the leading role and the middle(late) Palaeozoic and Cenozoic ones are next in importance. Mineralization was comparatively simple in the early geological period. and became diversified later on. In the early epochs copper deposits related to basaltic magmatism and metamorphosed marine sediments predominated, whereas in the later epochs those related to granitic magmatism and continental sedimentation were dominant. 5. There exist in China thirteen metallogenic provinces, of which the Lower Yangtze downwarping belt, Sanjiang fold system, Jiangnan axis and Xikang-Yunnan axis are of greater significance. 6. The crustal mobility in China was rather pronounced, the polycyclic evolution of the crust has resulted in such obvious phenomena as the inheritance of mineralization, the coexistence of various types and the superposition of different genetic types.展开更多
The Suoluogou gold deposit in Muli County of Sichuan Province is located in the southern section of the Ganzi- Litang suture zone (Figs. la, b), which is the largest gold deposit discovered in this suture zone in re...The Suoluogou gold deposit in Muli County of Sichuan Province is located in the southern section of the Ganzi- Litang suture zone (Figs. la, b), which is the largest gold deposit discovered in this suture zone in recent years. At present, the exploration of the Suoluogou gold deposit is still in progress, and the amount of resource is increasing.展开更多
The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part ...The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part of Nanling polymetallic deposit belt.The outcropping stratas consist of upper Devonian Shetianqiao,Xikuangshan Formation,Lower Carboniferous Menggong’ao,Shidengzi,Ceshui,and Zimenqiao Formation.Igneous rocks in the Baoshan ore area mainly comprise granodiorite porphyry.Furthermore,the radio isotopic age ranges from 123 Ma to 183 Ma,belonging to the early to middle Yanshanian.展开更多
1 Introduction 1The Sanjiang region in SE Tibet Plateau and NW Yunnan is known to have formed by amalgamation of Gongwanaderived continental blocks and arc terranes as a result of oceanic subduction followed by contin...1 Introduction 1The Sanjiang region in SE Tibet Plateau and NW Yunnan is known to have formed by amalgamation of Gongwanaderived continental blocks and arc terranes as a result of oceanic subduction followed by continental展开更多
Da Qaidam salt lake is known for its both liquid and solid boron resource.Data from previous investigation of the Da Qaidam salt lake provided a comparable framework for this study that focused on investigating the se...Da Qaidam salt lake is known for its both liquid and solid boron resource.Data from previous investigation of the Da Qaidam salt lake provided a comparable framework for this study that focused on investigating the section beneath the bottom of the perennial salt lake,including the timing,展开更多
The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural...The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural trap. The mechanism has three major features: (1) timing of mineralization; (2) positioning of hostformation; and (3) dependence of ore-controlling structure on properties of rocks. The 'optimum surface' is adivisional structural plane which marks obvious difference in physical, chemical and mechanical properties andis favorable for mineralization. It is also a unity of structures. lithofacies and orebodies. The structural and geochemical characteristics of the ore deposits indicate the migration trend of the ma-jor characteristic clements in the ore-controlling fault belt: elements with a small radius (Si, Fe, Mg and Al)moved towards and concentrated at the center of the belt while large-radius ones (Ca, K and Na) were remotefrom the center.展开更多
1 Introduction The Southeast Asia is endowed with a diversity of mineral resources(Khin Zaw et al.,2014).Tin,copper,nickel,bauxite,chromium and potash resources are widely distributed in the Southeast Asia,show consid...1 Introduction The Southeast Asia is endowed with a diversity of mineral resources(Khin Zaw et al.,2014).Tin,copper,nickel,bauxite,chromium and potash resources are widely distributed in the Southeast Asia,show considerable economic significance,have obvious complementarity to China,and is paid wide attention by Chinese geologists and mining industry in recent years.展开更多
1 Introduction The uranium deposits related with Indosinian and Yanshanian granite have provided the abundant resource of uranium during the past several decades in China.The deposits are mainly distributing in the Gu...1 Introduction The uranium deposits related with Indosinian and Yanshanian granite have provided the abundant resource of uranium during the past several decades in China.The deposits are mainly distributing in the Guidong granite展开更多
1 Introduction The Dongshengmiao deposit is a super-large Zn-Pb polymetallic sulfide deposit which occurring in the Langshan-Zhaertaaishan metallogenic belt,and located in the western margin of the North China Platfor...1 Introduction The Dongshengmiao deposit is a super-large Zn-Pb polymetallic sulfide deposit which occurring in the Langshan-Zhaertaaishan metallogenic belt,and located in the western margin of the North China Platform.The ore-bodies of Dongshengmiao deposits are mainly hosted in the second Formation of Langshan Group.There are some studies on the geological characteristics(Peng et al.,2004),geological and展开更多
1 Introduction The Huize Zn-Pb district is located in the tectonic composite position,became one of the important production areas of zinc,lead and germanium in China.In the Huize lead-zinc deposit,the interlayer faul...1 Introduction The Huize Zn-Pb district is located in the tectonic composite position,became one of the important production areas of zinc,lead and germanium in China.In the Huize lead-zinc deposit,the interlayer faults are most展开更多
1 Geology Daolundaba copper polymetallic deposit occurs in West Ujimqin Banner,the Xilin Gol League of Inner Mongolia,along the west side of South part of Daxinganling ore belt,whose tectonic position just lies at the...1 Geology Daolundaba copper polymetallic deposit occurs in West Ujimqin Banner,the Xilin Gol League of Inner Mongolia,along the west side of South part of Daxinganling ore belt,whose tectonic position just lies at the junction of Siberian Block in the south part,North China Block in the north and Songliao block in the east.The Daolundaba copper polymetallic deposit is hosted by the Lower Proterozoic Baoyintu group of biotite-plagioclase gneiss(Pt1by),upper Permian Linxi formation of sandy slate(P2l),and the Hercynian Qianjinchang pluton of biotite granite.展开更多
1 Introduction Daliangzi large-sized Pb-Zn deposit,located in the Western Margin of Yangtze Plate,is typical Pb-Zn deposit in the sichuan-yunnan-guizhou polymetallic metallogenic belt.Ore bodies are hosted in Sinian
Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors c...Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors consider that the concentration of the B-F-Li-Rb-Cs-Sn association is related to acidic magmatism inthe study area. The Fe-Mg-Li tourmaline in the ore is the replaced product of the country rocks byhypothermal fluid. The δ^(18)O values of mineral separates are +2.01- +13.16‰ and their δ^(34)S values, +2.6-+7.2‰. The ore-forming materials were derived from hydrothermal fluid of granitic magma. For themineralization, the temperature is 450°-350℃, the pressure, 450-1000×10~5 Pa, and the age, Himalayan(21.5 Ma). According to the geochemical characteristics, a minerogenic model is established: the deposit is ahypothermal cassiterite-quartz vein type tin deposit controlled by the hidden Himalayan granites.展开更多
To understand the evolution of the Miocene gravity flow deposits in the Lower Congo-Congo Fan Basin,this paper documents the Miocene sequence stratigraphic framework,the depositional characteristics and the controllin...To understand the evolution of the Miocene gravity flow deposits in the Lower Congo-Congo Fan Basin,this paper documents the Miocene sequence stratigraphic framework,the depositional characteristics and the controlling factors of the gravity flow system.Based on the establishment of high-resolution sequence stratigraphic framework,lithofacies characteristics and sedimentary units of the gravity flow deposits in the region are identified by using seismic,well logging and core data comprehensively,and the sedimentary evolution process is revealed and the controlling factors are discussed.The Miocene can be divided into four 3 rd-order sequences(SQ1-SQ4).The gravity flow deposits mainly include siliciclastic rock and pelite.The main sedimentary units include slumping deposits,mass transport deposits(MTD),channel fills,levee-overbank deposits,and frontal lobes.In the Early Miocene(SQ1),mainly gull-wing,weakly restricted to unrestricted depositional channel-overbank complexes and lobes were formed.In the early Middle Miocene(SQ2),W-shaped and weakly restricted erosional-depositional channels(multi-phase superposition)were subsequently developed.In the late Middle Miocene(SQ3),primarily U-shaped and restricted erosional channels were developed.In the Late Miocene(SQ4),largely V-shaped and deeply erosional isolated channels were formed in the study area.Climate cooling and continuous fall of the sea level made the study area change from toe of slope-submarine plain to lower continental slope,middle continental slope and finally to upper continental slope,which in turn affected the strength of the gravity flow.The three times of tectonic uplifting and climate cooling in the West African coast provided abundant sediment supply for the development of gravity flow deposits.Multistage activities of salt structures played important roles in redirecting,restricting,blocking and destroying the gravity flow deposits.Clarifying the characteristics,evolution and controlling factors of the Miocene gravity flow deposits in the Lower Congo-Congo Fan Basin can provide reference for deep-water petroleum exploration in this basin.展开更多
In this study, the three-dimensional physical model of pleated air filtration media was simplified to porous media model, and the calculation parameters of porous media were obtained based on experimental data. The mo...In this study, the three-dimensional physical model of pleated air filtration media was simplified to porous media model, and the calculation parameters of porous media were obtained based on experimental data. The model of V-shaped pleated air filter media is constructed, the height of the media pleat is 50 mm and the pleat thickness is 4 mm, the pleat angle is 3.7°. The Hertz-Mindlin contact model was modified by Johnson Kendall Roberts (JKR) adhesion contact model. The deposition process of particles in media was simulated based on computational fluid dynamics (CFD) theory and discrete element method (DEM). Results show that the CFD–DEM coupling method can be effectively applied to the macro research of pleated air filter media. The particles will form dust layer and dendrite structure on the fiber surface, and the dust layer will affect the subsequent air flow organization, and the dendrite structure will eventually form a “particle wall”. The formation of the “particle wall” will prevent the particles from moving further in the fluid domain, which makes area of pleated angle become the “low efficiency” part about the particle deposition. Compared with area of pleated angle, the particles are concentrated in the opening area and the middle area of the pleated to agglomerate and deposit.展开更多
基金supported by the National Science Foundation of China(Grant Nos.41972099,4217020246)the National Science and Technology Major of China(Grant Nos.2017ZX05009-002,2017ZX05072-002)。
文摘Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.
基金financial support from the National Natural Science Foundation of China(U2040221)the fund on basic scientific research project of nonprofit central research institutions(Y321001)。
文摘Material distribution characteristics during sliding and depositing is particularly significative to investigate the internal structure and spatial variation of landslide dams,which are fundamentally determining the mechanical and hydraulic behavior and the susceptibility to cause dam failure.However,limited by longevity shortages and special geographic environments,the material distribution characteristics and their formation mechanisms are difficult to observe in the field.Therefore,an experimental apparatus modeling a landslide dam was developed in this paper,designing three sampling methods with two valley states.The internal deposit characteristics,void ratio variation and relative content of the particle size range(PSR)were analyzed,and the mechanics of deposit structure were also delicately ascertained.The results indicate that granular material deposited in valley shows a structure of inverse grain size accumulation in both vertical and horizontal directions,exhibiting spatial variability of particle gradation and void ratio.The characteristic PSR decreases from 22-30 mm in the two-dimensional state to 10-14 mm in the threedimensional state.Vibration excitation and vibration sieve are the intrinsic mechanisms of granular flow segregation,intrinsically inducing the formation of inverse grading deposit structures.Consequently,spatial variability in size is mainly trig gered by segregation,whereas coarse particle content and deposition boundaries merely exacerbate the difference degree.
基金supported by the National Basic Research Program of China (Grant No.2007CB209604)
文摘Extensive mass transport deposits(MTDs), which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwide. To date, no large-scale MTDs have been found in Chinese terrestrial basins. Based on integrated analysis of the seismic, drilling, core and logging data, this article report MTDs have been found in Songliao terrestrial basin(SLTB), Northeast China. During the depositional period of the Upper Cretaceous Qingshankou Formation, slope break of lacustrine basins was an ideal discharge place for gravity depositions. Regional sedimentary study of MTDs reveals that Cretaceous-age MTDs in SLTB were deposited in slope-break environments by slide, slump and debris flow, and MTDs were mixed with little turbidite simultaneously. Besides the massive aspect, key features of MTDs are the common presence of deformational structures or softsedimentary deformation, floating shale clasts, boudins, microfaults, distortion beddings, rotated sand debris. Detailed mapping of two three-dimensional(3-D) seismic surveys acquired in Yingtai(YT) and Haituozi(HTZ) areas reveals that MTDs are characterized by chaotic, mounded, and transparent seismic reflection. Growth fault, slope gully and geomorphology of the slope break greatly influenced the sedimentary process and external geometry of MTDs, and as a consequence, MTDs in SLTB exhibit classic fan-like geometry and some special(non-fan-like) external geometry. Furthermore, fanlike MTDs can be divided into three subcategories, including isolated fan, mother-son fan and stacked fan. Non-fan-like MTDs can be divided into two subcategories, strip-like MTDs and faulted-pit MTDs. A new sedimentary model has been built for MTDs in SLTB. MTDs have become a new exploration and development target in the SLTB.
文摘Based upon a comprehensive study of 123 copper deposits in China. this paper reaches the following conclusions: 1. The crust in China was solidified pretty late; with the accretion of the plate, the copper mineralization moved towards its margin in space and became successively younger in age. 2. The major copper ore types ever found in the world have mostly been discovered in China, in which the porphyry type seems to be the most important and the massive sulfide type in the transitional bed between marine clastic and carbonate rocks is clearly defined. 3. Carbonate strata are widespread in China and their deposition lasted for a long geological period, so the proportion of copper deposits occurring in them is large as compared with other parts of the world. 4. Seven metallogenic epochs can be recognized, in which the Mesozoic one plays the leading role and the middle(late) Palaeozoic and Cenozoic ones are next in importance. Mineralization was comparatively simple in the early geological period. and became diversified later on. In the early epochs copper deposits related to basaltic magmatism and metamorphosed marine sediments predominated, whereas in the later epochs those related to granitic magmatism and continental sedimentation were dominant. 5. There exist in China thirteen metallogenic provinces, of which the Lower Yangtze downwarping belt, Sanjiang fold system, Jiangnan axis and Xikang-Yunnan axis are of greater significance. 6. The crustal mobility in China was rather pronounced, the polycyclic evolution of the crust has resulted in such obvious phenomena as the inheritance of mineralization, the coexistence of various types and the superposition of different genetic types.
基金financially supported by the Program of the China Geological Survey (grant No.12120114012501 and 1212011120608)
文摘The Suoluogou gold deposit in Muli County of Sichuan Province is located in the southern section of the Ganzi- Litang suture zone (Figs. la, b), which is the largest gold deposit discovered in this suture zone in recent years. At present, the exploration of the Suoluogou gold deposit is still in progress, and the amount of resource is increasing.
基金Supported by the Program of Superseding Resources Prospecting in Crisis Mines in China(20089927)
文摘The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part of Nanling polymetallic deposit belt.The outcropping stratas consist of upper Devonian Shetianqiao,Xikuangshan Formation,Lower Carboniferous Menggong’ao,Shidengzi,Ceshui,and Zimenqiao Formation.Igneous rocks in the Baoshan ore area mainly comprise granodiorite porphyry.Furthermore,the radio isotopic age ranges from 123 Ma to 183 Ma,belonging to the early to middle Yanshanian.
基金financially supported by the Open Funds of Key Laboratory of Mineralogy and Metallogeny, Guangzhou Institute of Geochemistry (Grant No. GLMPM-009)the Open Funds of State Key Laboratory of Ore Deposit Geochemistry (Grant No. 201505)
文摘1 Introduction 1The Sanjiang region in SE Tibet Plateau and NW Yunnan is known to have formed by amalgamation of Gongwanaderived continental blocks and arc terranes as a result of oceanic subduction followed by continental
文摘Da Qaidam salt lake is known for its both liquid and solid boron resource.Data from previous investigation of the Da Qaidam salt lake provided a comparable framework for this study that focused on investigating the section beneath the bottom of the perennial salt lake,including the timing,
文摘The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural trap. The mechanism has three major features: (1) timing of mineralization; (2) positioning of hostformation; and (3) dependence of ore-controlling structure on properties of rocks. The 'optimum surface' is adivisional structural plane which marks obvious difference in physical, chemical and mechanical properties andis favorable for mineralization. It is also a unity of structures. lithofacies and orebodies. The structural and geochemical characteristics of the ore deposits indicate the migration trend of the ma-jor characteristic clements in the ore-controlling fault belt: elements with a small radius (Si, Fe, Mg and Al)moved towards and concentrated at the center of the belt while large-radius ones (Ca, K and Na) were remotefrom the center.
文摘1 Introduction The Southeast Asia is endowed with a diversity of mineral resources(Khin Zaw et al.,2014).Tin,copper,nickel,bauxite,chromium and potash resources are widely distributed in the Southeast Asia,show considerable economic significance,have obvious complementarity to China,and is paid wide attention by Chinese geologists and mining industry in recent years.
基金supported by projects from Chinese Geological Survery Programme (12120115035601)
文摘1 Introduction The uranium deposits related with Indosinian and Yanshanian granite have provided the abundant resource of uranium during the past several decades in China.The deposits are mainly distributing in the Guidong granite
文摘1 Introduction The Dongshengmiao deposit is a super-large Zn-Pb polymetallic sulfide deposit which occurring in the Langshan-Zhaertaaishan metallogenic belt,and located in the western margin of the North China Platform.The ore-bodies of Dongshengmiao deposits are mainly hosted in the second Formation of Langshan Group.There are some studies on the geological characteristics(Peng et al.,2004),geological and
基金Funds for the Programs of the National Natural Science Foundation(Noes.41572060,U1133602)Projects of YM Lab(2011)Innovation Team of Yunnan province and KMUST(2008,2012)
文摘1 Introduction The Huize Zn-Pb district is located in the tectonic composite position,became one of the important production areas of zinc,lead and germanium in China.In the Huize lead-zinc deposit,the interlayer faults are most
文摘1 Geology Daolundaba copper polymetallic deposit occurs in West Ujimqin Banner,the Xilin Gol League of Inner Mongolia,along the west side of South part of Daxinganling ore belt,whose tectonic position just lies at the junction of Siberian Block in the south part,North China Block in the north and Songliao block in the east.The Daolundaba copper polymetallic deposit is hosted by the Lower Proterozoic Baoyintu group of biotite-plagioclase gneiss(Pt1by),upper Permian Linxi formation of sandy slate(P2l),and the Hercynian Qianjinchang pluton of biotite granite.
文摘1 Introduction Daliangzi large-sized Pb-Zn deposit,located in the Western Margin of Yangtze Plate,is typical Pb-Zn deposit in the sichuan-yunnan-guizhou polymetallic metallogenic belt.Ore bodies are hosted in Sinian
文摘Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors consider that the concentration of the B-F-Li-Rb-Cs-Sn association is related to acidic magmatism inthe study area. The Fe-Mg-Li tourmaline in the ore is the replaced product of the country rocks byhypothermal fluid. The δ^(18)O values of mineral separates are +2.01- +13.16‰ and their δ^(34)S values, +2.6-+7.2‰. The ore-forming materials were derived from hydrothermal fluid of granitic magma. For themineralization, the temperature is 450°-350℃, the pressure, 450-1000×10~5 Pa, and the age, Himalayan(21.5 Ma). According to the geochemical characteristics, a minerogenic model is established: the deposit is ahypothermal cassiterite-quartz vein type tin deposit controlled by the hidden Himalayan granites.
基金Supported by the China National Science and Technology Major Project(2016ZX05004-002)National Natural Science Foundation of China(91328201)。
文摘To understand the evolution of the Miocene gravity flow deposits in the Lower Congo-Congo Fan Basin,this paper documents the Miocene sequence stratigraphic framework,the depositional characteristics and the controlling factors of the gravity flow system.Based on the establishment of high-resolution sequence stratigraphic framework,lithofacies characteristics and sedimentary units of the gravity flow deposits in the region are identified by using seismic,well logging and core data comprehensively,and the sedimentary evolution process is revealed and the controlling factors are discussed.The Miocene can be divided into four 3 rd-order sequences(SQ1-SQ4).The gravity flow deposits mainly include siliciclastic rock and pelite.The main sedimentary units include slumping deposits,mass transport deposits(MTD),channel fills,levee-overbank deposits,and frontal lobes.In the Early Miocene(SQ1),mainly gull-wing,weakly restricted to unrestricted depositional channel-overbank complexes and lobes were formed.In the early Middle Miocene(SQ2),W-shaped and weakly restricted erosional-depositional channels(multi-phase superposition)were subsequently developed.In the late Middle Miocene(SQ3),primarily U-shaped and restricted erosional channels were developed.In the Late Miocene(SQ4),largely V-shaped and deeply erosional isolated channels were formed in the study area.Climate cooling and continuous fall of the sea level made the study area change from toe of slope-submarine plain to lower continental slope,middle continental slope and finally to upper continental slope,which in turn affected the strength of the gravity flow.The three times of tectonic uplifting and climate cooling in the West African coast provided abundant sediment supply for the development of gravity flow deposits.Multistage activities of salt structures played important roles in redirecting,restricting,blocking and destroying the gravity flow deposits.Clarifying the characteristics,evolution and controlling factors of the Miocene gravity flow deposits in the Lower Congo-Congo Fan Basin can provide reference for deep-water petroleum exploration in this basin.
文摘In this study, the three-dimensional physical model of pleated air filtration media was simplified to porous media model, and the calculation parameters of porous media were obtained based on experimental data. The model of V-shaped pleated air filter media is constructed, the height of the media pleat is 50 mm and the pleat thickness is 4 mm, the pleat angle is 3.7°. The Hertz-Mindlin contact model was modified by Johnson Kendall Roberts (JKR) adhesion contact model. The deposition process of particles in media was simulated based on computational fluid dynamics (CFD) theory and discrete element method (DEM). Results show that the CFD–DEM coupling method can be effectively applied to the macro research of pleated air filter media. The particles will form dust layer and dendrite structure on the fiber surface, and the dust layer will affect the subsequent air flow organization, and the dendrite structure will eventually form a “particle wall”. The formation of the “particle wall” will prevent the particles from moving further in the fluid domain, which makes area of pleated angle become the “low efficiency” part about the particle deposition. Compared with area of pleated angle, the particles are concentrated in the opening area and the middle area of the pleated to agglomerate and deposit.