Comprehensive simulation of snow crystal deposition and electric field characteristics of composite sheath improved porcelain cantilever insulator in a wind and snow environment

The installed porcelain insulators on existing railway lines in China are prone to“snow flash”in winter.In order to prevent the occurrence of“snow flash”and improve the reliability of the insulators,a composite-porcelain insulator is designed.A multi-physics coupling simulation model is built based on numerical simulation methods of the electromagnetic field theory and computational fluid dynamics.Taking average electric field intensity on the surface of the insulator as the characteristic parameter of the electric field distortion degree and the snow crystal collision coefficient and distribution coefficient as the characteristic parameter of snow crystal deposition,the characteristics of snow crystal deposition under different wind speeds and wind direction angles and the electric field characteristics under two snow cover types are analyzed.The simulation results show that the average electric field intensity of composite-porcelain insulators is 10.4%and 13.8%,respectively,lower than that of porcelain insulators in vertical and horizontal wind snow covers,which can effectively reduce the degree of electric field distortion.The collision coefficient of snow crystals on the surface of the composite-porcelain insulator sheds is 16.0%higher than that of the porcelain insulator,and the collision coefficient of the trunk and the fittings are lower 20.2%and 11.9%than that of the porcelain insulator.There is almost no change in the distribution coefficient of the insulator sheds.

Synthesis and Separation Performance of Y-type Zeolite Membranes by Pre-Seeding Using Electrophoresis Deposition Method

Y-type zeolite membranes were synthesized by a two-step approach in which a particle seed layer was prepared by electrophoresis deposition(EPD) at first, followed by densification through secondary growth. The pre-seeding adopted the directing agent for Y-type zeolite synthesis serving as seeds. The effects of aging time of the directing agent, electrophoresis voltage and electrophoresis deposition time on seed layers quality as well as the quality of zeolite membranes were investigated. The results indicated that the zeolite seeds derived from the directing agent could be evenly deposited on substrate under certain EPD conditions. The XRD patterns of the seeded substrates after the secondary growth showed that the pure as-synthesized Y-type zeolite membranes had successfully grown on the substrates. The SEM images indicated that the substrate was covered by the highly intergrown zeolite crystals when the seeding solution employed the directing agent with an aging time of 2 days. The separation performance of zeolite membrane was evaluated using a CO_2/N2 mixture(with a mole ratio of 1:1) at different temperatures. Furthermore, the pervaporation measurements were carried out for the dehydration of isopropanol aqueous solutions with different mass fractions. The as-synthesized Y-type zeolite membranes exhibited a relatively high selectivity of water from isopropanol and sustainable permeation flux.

Phosphoglyceride crystal deposition disease requiring differential diagnosis from malignant tumors and confirmed by Raman spectroscopy: A case report

BACKGROUND Phosphoglyceride crystal deposition disease(PCDD)is a rare acquired disease in which phospholipid crystals deposit in bone and soft tissue long after surgery,trauma,or repeated injections.CASE SUMMARY A 60-year-old-woman was referred to our department because of multiple abdominal masses after open splenectomy for idiopathic thrombocytopenic purpura 29 years earlier.All the masses showed marked fluorodeoxyglucose(FDG)uptake on ^(18)F-fluorodeoxyglucose positron emission tomography(^(18)F-FDGPET)and were strongly suspected to be malignant tumors.Surgical biopsies were performed,and the abdominal masses were found to be aligned vertically,three in a row,along the tissue layers cut in the patient’s previous surgery.Pathological finding of the specimens showed foreign body granuloma consisting of histiocytes and multinucleated giant cells accumulating around needle-like crystals.The crystals were confirmed as phosphoglyceride by Raman spectroscopy,and PCDD was diagnosed.To our knowledge,this is the first report of PCDD diagnosed by Raman spectroscopy.CONCLUSION We made a definitive diagnosis of PCDD in a patient with multiple tumors showing marked FDG uptake on ^(18)F-FDG-PET by incisional biopsy and composition analysis using Raman spectroscopy,a method that has not previously been reported for the diagnosis of PCDD.

A MODELING STUDY OF PARAMETERIZATION SCHEMES FOR DEPOSITIONAL GROWTH OF ICE CRYSTAL:FOUR RAINFALL CASES OVER TROPICS AND MIDLATITUDES

Depositional growth of ice crystal is one of the major processes for development of precipitation systems and can be represented by depositional growth of cloud ice from cloud water(P_(IDW)) and depositional growth of snow from cloud ice(P_(SFI)) in cloud-resolving model. Four parameterization schemes are analyzed in the cloud-resolving model simulations of four rainfall cases over the tropics and midlatitudes. The comparison of time and model domain mean data shows that Shen's scheme produces the closest rainfall simulation to the observation. Compared to Zeng's scheme,Shen's scheme improves the mean rain-rate simulation significantly through the dramatic decrease in depositional growth of cloud ice from cloud water. Compared to other schemes, Shen's scheme produces the better rainfall simulation via the reduction in the mean rain rate associated with the enhanced gain of cloud water and ice.

Template-based growth of titanium dioxide nanorods by a particulate sol-electrophoretic deposition process

TiO2 nanorods have been successfully grown into a track-etched polycarbonate （PC） membrane by a particulate sol-electrophoretic deposition from an aqueous medium. The prepared sols had a narrow particle size distribution around 17 nm and excellent stability against aging, with zeta potentials in the range of 47-50 mV at pH 2. It was found that TiO2 nanorods were grown from dilute aqueous sol with a low, 0.1-M concentration. Fourier transform infrared spectroscopy （FT-IR） analysis confirmed that a full conversion of titanium isopropoxide was obtained by hydrolysis, resulting in the formation of TiO2 particles. X-ray diffraction （XRD） results revealed that TiO2 nanorods dried at 100℃ were a mixture of anatase and brookite phases, whereas they were a mixture of anatase and futile structures at 500℃. Moreover, the rutile content of the TiO2 nanorods was higher than that of TiO2 powders. Transmission electron microscope （TEM） images confirmed that TiO2 nanorods had a smooth morphology and longi- tudinal uniformity in diameter. Field emission scanning electron microscope （FE-SEM） images showed that TiO2 nanorods grown by sol-electrophoresis from the dilute aqueous sol had a dense structure with a uniform diameter of 200 rim, containing small particles with an average size of 15 nm. Simultaneous differential thermal （SDT） analysis verified that individual TiO2 nanorods, grown into a PC template, were obtained after annealing at 500℃. Based on kinetic studies, it was found that uniform TiO2 nanorods with high-quality morphology were obtained under optimum conditions at an applied potential of 0.3 V/cm and a deposition time of 60 min.

Deposition behavior of residual aluminum in drinking water distribution system：Effect of aluminum speciation

Finished drinking water usually contains some residual aluminum.The deposition of residual aluminum in distribution systems and potential release back to the drinking water could significantly influence the water quality at consumer taps.A preliminary analysis of aluminum content in cast iron pipe corrosion scales and loose deposits demonstrated that aluminum deposition on distribution pipe surfaces could be excessive for water treated by aluminum coagulants including polyaluminum chloride（PACl）.In this work,the deposition features of different aluminum species in PACl were investigated by simulated coil-pipe test,batch reactor test and quartz crystal microbalance with dissipation monitoring.The deposition amount of non-polymeric aluminum species was the least,and its deposition layer was soft and hydrated,which indicated the possible formation of amorphous Al（OH）3.Al（13） had the highest deposition tendency,and the deposition layer was rigid and much less hydrated,which indicated that the deposited aluminum might possess regular structure and self-aggregation of Al（13）could be the main deposition mechanism.While for Al（30）,its deposition was relatively slower and deposited aluminum amount was relatively less compared with Al（13）.However,the total deposited mass of Al（30） was much higher than that of Al（13）,which was attributed to the deposition of particulate aluminum matters with much higher hydration state.Compared with stationary condition,stirring could significantly enhance the deposition process,while the effect of pH on deposition was relatively weak in the near neutral range of 6.7 to 8.7.

Spectral evolution of NIR luminescence in a Yb^(3+)-doped photonic crystal fiber prepared by non-chemical vapor deposition

Silica-based yb3＋-doped glass is prepared by non-chemical vapor deposition. The drawn photonic crystal fiber （PCF） has a strong absorption at 976 nm and emission wavelength of approximately 1 037 nm. The intensity and spectral lineshape of the near infrared （NIR） luminescence of the Yb3＋-doped PCF are recorded and discussed in terms of excitation power, excitation wavelength, fiber length, and Yba＋ ion concentration. The emission intensifies as the excitation power and Yb3＋ ion concentration increase. The intensity of the shorter wavelength side of the luminescence spectrum decreases as the length of the PCF increases.

Prediction of Dendrite Orientation and Stray Grain Distribution in Laser Surface-melted Single Crystal Superalloy

A vectorization analysis technique for crystal growth and microstructure development in single-crystal weld was developed in our previous work. Based on the vectorization method, crystal growth and stray grain distribution in laser surface remelting of single crystal superalloy CMSX-4 were investigated in com- bination of simulations with experimental observations. The energy distribution of laser was taken into consideration in this research. The experimental results demonstrate that the simulation model applies well in the prediction of dendrite growth direction. Moreover, the prediction of stray grain distribution works well except for the region of dendrites growing along the [100] direction.