Suspended asphaltenic heavy organic particles in petroleum fluids may stick to the inner walls of oil wells and pipelines. This is the major reason for fouling and arterial blockage in the petroleum industry. This rep...Suspended asphaltenic heavy organic particles in petroleum fluids may stick to the inner walls of oil wells and pipelines. This is the major reason for fouling and arterial blockage in the petroleum industry. This report is devoted the study of the mechanism of migration of suspended heavy organic particles towards the walls in oil-producing wells and pipelines. In this report we present a detailed analytical model for the heavy organics suspended particle deposition coefficient corresponding to petroleum fluids flow production conditions in oil wells. We predict the rate of particle deposition during various turbulent flow regimes. The turbulent boundary layer theory and the concepts of mass transfer are utilized to model and calculate the particle deposition rates on the walls of flowing conduits. The developed model accounts for the eddy diffusivity, and Brownian diffusivity as well as for inertial effects. The analysis presented in this paper shows that rates of particle deposition （during petroleum fluid production） on the walls of the flowing channel due solely to diffusion effects are small. It is also shown that deposition rates decrease with increasing particle size. However, when the process is momentum controlled （large particle sizes） higher deposition rates are expected.展开更多
SnSe thin films of thickness 180 nm have been deposited on glass substrates by reactive evaporation at an optimized substrate temperature of 523 ± 5 K and pressure of 10^（-5） mbar.The as-prepared SnSe thin film...SnSe thin films of thickness 180 nm have been deposited on glass substrates by reactive evaporation at an optimized substrate temperature of 523 ± 5 K and pressure of 10^（-5） mbar.The as-prepared SnSe thin films are characterized for their structural,optical and electrical properties by various experimental techniques.The p-type conductivity,near-optimum direct band gap,high absorption coefficient and good photosensitivity of the SnSe thin film indicate its suitability for photovoltaic applications.The optical constants,loss factor,quality factor and optical conductivity of the films are evaluated.The results of Hall and thermoelectric power measurements are correlated to determine the density of states,Fermi energy and effective mass of carriers and are obtained as 2.8×10^（17）cm^（-3）,0.03 eV and 0.05m_0 respectively.The high Seebeck coefficient ≈ 7863 μV/K,reasonably good power factor ≈7.2×10^（-4） W/（m·K^2） and thermoelectric figure of merit ≈1.2 observed at 42 K suggests that,on further work,the prepared SnSe thin films can also be considered as a possible candidate for cryogenic thermoelectric applications.展开更多
文摘Suspended asphaltenic heavy organic particles in petroleum fluids may stick to the inner walls of oil wells and pipelines. This is the major reason for fouling and arterial blockage in the petroleum industry. This report is devoted the study of the mechanism of migration of suspended heavy organic particles towards the walls in oil-producing wells and pipelines. In this report we present a detailed analytical model for the heavy organics suspended particle deposition coefficient corresponding to petroleum fluids flow production conditions in oil wells. We predict the rate of particle deposition during various turbulent flow regimes. The turbulent boundary layer theory and the concepts of mass transfer are utilized to model and calculate the particle deposition rates on the walls of flowing conduits. The developed model accounts for the eddy diffusivity, and Brownian diffusivity as well as for inertial effects. The analysis presented in this paper shows that rates of particle deposition （during petroleum fluid production） on the walls of the flowing channel due solely to diffusion effects are small. It is also shown that deposition rates decrease with increasing particle size. However, when the process is momentum controlled （large particle sizes） higher deposition rates are expected.
基金University Grants Commission (UGC), Government of India for financial assistance in the form of Research Fellowship in Science for Meritorious Students (RFSMS)
文摘SnSe thin films of thickness 180 nm have been deposited on glass substrates by reactive evaporation at an optimized substrate temperature of 523 ± 5 K and pressure of 10^（-5） mbar.The as-prepared SnSe thin films are characterized for their structural,optical and electrical properties by various experimental techniques.The p-type conductivity,near-optimum direct band gap,high absorption coefficient and good photosensitivity of the SnSe thin film indicate its suitability for photovoltaic applications.The optical constants,loss factor,quality factor and optical conductivity of the films are evaluated.The results of Hall and thermoelectric power measurements are correlated to determine the density of states,Fermi energy and effective mass of carriers and are obtained as 2.8×10^（17）cm^（-3）,0.03 eV and 0.05m_0 respectively.The high Seebeck coefficient ≈ 7863 μV/K,reasonably good power factor ≈7.2×10^（-4） W/（m·K^2） and thermoelectric figure of merit ≈1.2 observed at 42 K suggests that,on further work,the prepared SnSe thin films can also be considered as a possible candidate for cryogenic thermoelectric applications.
