Numerical Study on Dry Deposition Processes in Canopy Layer

A coupling model between the canopy layer(CL) and atmospheric boundary layer (ABL) for the study of dry deposition velocity is developed. The model consists of six parts: chemical species conservation equation including absorptive factor; the species uptake action including detailed vertical variation of absorptive element in CL; momentum exchange in CL which is represented by a first-order closure momentum equation with an additional larger-scale diffusive term; momentum exchange in ABL which is described by a complete set of the ABL turbulent statistic parameters; absorptivity (or solubility or reflection) at the surface including effects of the physical and chemical characters of the species, land type, seasonal and diurnal variations of the meteorological variables; and deposition velocity derived by distributions of the species with height in CL. Variational rules of the concentration and deposition velocity with both height and time are simulated with the model for both corn and forest canopies. Results predicted with the bulk deposition velocity derived in the paper consist well with experimental data.

Microstructure of Rapidly Solidified Al-3.8Li-0.8Mg-0.4Cu-0.13Zr Alloy by Spray Deposition Processing

谷物是在尺寸的 5-20 亩 m，并且微观结构展出快速的团结优点。收缩孔被避免了，并且优先的粒子边界的形成被阻止了到大程度。但是仍然在那里存在有各种各样的形状的一些微毛孔。相对密度同样 -- 扔的材料平均是 94% 。主要在测试合金猛抛是三角洲(AlLi ) ， S (Al//2CuMg ) 和三角洲素数(Al//3Li ) 分阶段执行。(编辑作者摘要) 10 个裁判员。

RESEARCH ON LASER DIRECT DEPOSITION PROCESS OF Ti-6Al-4V ALLOY

Laser direct deposition （LDD） of metallic components is an advanced technology of combining CAD/CAM （computer aided design/computer aided manufacturing）, high power laser, and rapid prototyping. This technology uses laser beam to melt the powders fed coaxiaUy into the molten pool by the laser beam to fabricate fuUy dense metallic components. The present article mainly studies the LDD of Ti-6Al-4V alloy, which can be used to fabricate aircraft components. The mechanical properties of the Ti-6Al-4V alloy, fabricated by LDD, are obtained using the tension test, and the oxygen content of used powders and deposited specimens are measured. In the present article, it can be seen that the mechanical properties obtained using this method are higher than the ones obtained by casting, and equal to those got by wrought anneal. One aircraft part has been made using the LDD process. Because of this aircraft part, with sophisticated shape, the effect of the laser scanning track on the internal soundness of the deposited part was discussed.

Fabrication and Growth Mechanism of Single-crystalline Rutile TiO_2 Nanowires by Liquid-phase Deposition Process in a Porous Alumina Template

TiO2 nanowire arrays were successfully fabricated by liquid-phase deposition method using porous alumina templates. The obtained TiO2 nanowires were characterized using Raman spectroscopy, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, field emission scanning electron microscopy （FE- SEM）, transmission electron microscopy （TEM）, and selected area electron diffraction （SAED） analysis. Results of electron microscopic observations indicated that the nanowires were smooth and uniform with a diameter of about 50-80 nm and several micrometers in length. SAED, Raman, and XRD mea- surements showed that TiO2 nanowires were single-crystalline with a pure rutile structure after heating at 800 ~C for 10 h. In this situation, the nanowire constituents grew preferentially along the 〈001〉 direction. Furthermore, the formation process and mechanistic study of the Ti02 nanowire arrays were proposed and discussed in detail. The nanowires are clearly produced by the deposition of TiO2 particles on the inner wall of the template nanochannels.

Control of Deposition Processes and Structures of Fibroin Nanofilms by IR Pulsed Laser Ablation

1 Results Protein thin films gather increasing interests in various biomedical-related materials including surface treatment of implants and bio-tips.Processes via colloid chemical routes such as simple adsorption,dip-or spin coating enable formation of protein thin films on various substrates.Related methods are facile andconvenient without sophisticated instrumentation but not without restriction.Typical drawbacks are limited solubility of the film-forming species and wettability determined by the com...

PROTOTYPE SURFACE MICRO- PRECISION IN FUSED DEPOSITION MODELING PROCESS

To aim at prototype parts fabricated with fused deposition modeling （FDM） process, the problems how to improve and enhance their surface micro-precision are studied. The producing mechanism of surface roughness is explained with three aspects concretely including the principle error of rapid prototyping （RP） process, the inherent characteristics of FDM process, and some mi- cro-scratches on the surface of the extruded fiber. Based on the micro-characters of section shape of the FDM prototype, a physical model reflecting the outer shape characters is abstracted. With the physical simplified and deduced, the evaluating equations of surface roughness are acquired. According to the FDM sample parts with special design for experimental measurement, the real surface roughness values of different inclined planes are obtained. And the measuring values of surface roughness are compared with the calculation values. Furthermore, the causes of surface roughness deviation between measuring values and calculation values are respectively analyzed and studied. With the references of analytic conclusions, the measuring values of the experimental part surface are revised, and the revised values nearly accord with the calculation values. Based on the influencing principles of FDM process parameters and special post processing of FDM prototype parts, some concrete measures are proposed to reduce the surface roughness of FDM parts, and the applying effects are better.

Processing and Microstructure of LaCrO_3 Thin Film Derived from Chelating Precursors

LaCrO 3 thin films were successfully prepared at lower temperatures by the sol gel process based on organic chelating precursors. The formation and transition of the gel derived from the chelate solution were analyzed by means of IR, DTA TG, XRD and TEM. In addition, the formation and microstructure of thin films were investigated by SEM and XRD. The results show that the gel formed by the condensation reaction is decomposed at about 195 ℃, transformed into a great quantity of LaCrO 3 by heat treating at 200 ℃ for 1 h, and the complexing ways in the gel have an important influence upon the formation of LaCrO 3. The formation process of thin film includes the nucleation and growth on the substrate, the formation of polycrystalline islands and the continuous film by repeating the dip coating process. Higher heat treatment temperature gives rise to larger granules in the thin film.

Remarkable carbon dioxide catalytic capture (CDCC) leading to solid-form carbon material via a new CVD integrated process (CVD-IP): An alternative route for CO_2 sequestration

Through our newly-developed ＂chemical vapor deposition integrated process （ISVD-IP）＇＂ using carbon OlOXlae （t..u2） as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and converted to a new solid-form product, i.e., carbon nanotubes （CO2-derived） at a quite high yield （the single-pass carbon yield in the solid-form carbon-product produced from CO2 catalytic capture and conversion was more than 30% at a single-pass carbon-base）. For comparison, when only pure carbon dioxide was introduced using the conventional CVD method without integrated process, no solid-form carbon-material product could be formed. In the addition of saturated steam at room temperature in the feed for CVD, there were much more end-opening carbon nano-tubes produced, at a slightly higher carbon yield. These inspiring works opened a remarkable and alternative new approach for carbon dioxide catalytic capture to solid-form product, comparing with that of CO2 sequestration （CCS） or CO2 mineralization （solidification）, etc. As a result, there was much less body volume and almost no greenhouse effect for this solid-form carbon-material than those of primitive carbon dioxide.

Sedimentary characteristics and internal architecture of a river-dominated delta controlled by autogenic process:implications from a flume tank experiment

Autogenic processes are widely found in various sedimentary systems and they play an important role in the depositional evolution and corresponding sedimentary architecture.However,autogenic processes are often affected by changing allogenic factors and are difficult to be identified and analyzed from modern and ancient records.Through the flume tank experiment under constant boundary conditions,the depositional process,evolution principles,and the sedimentary architecture of a river-dominated delta was presented,and a corresponding sedimentary architecture model was constructed.The evolution of river-dominated delta controlled only by autogenic process is obviously periodic,and each autogenic cycle can be divided into an initial progradational stage,a middle retrogratational stage,and a late aggradational–progradational stage.In the initial progradational stage,one feeder channel incised into the delta plain,mouth bar(s)was formed in front of the channel mouth,and small-scale crevasse splays were formed on the delta plain.In the middle retrogradational stage,the feeder channel was blocked by the mouth bar(s)which grew out of water at the end of the initial stage,and a set of large-scale distributary splay complexes were formed on the delta plain.These distributary splay complexes were retrogradationally overlapped due to the continuous migration of the bifurcation point of the feeder channel.In the late aggradational–progradational stage,the feeder channel branched into several radial distributary channels,overlapped distributary channels were formed on the delta plain,and terminal lobe complexes were formed at the end of distributary channels.The three sedimentary layers formed in the three stages constituted an autogenic succession.The experimental delta consisted of six autogenic depositional successions.Dynamic allocation of accommodation space and the following adaptive sediments filling were the two main driving factors of the autogenic evolution of deltas.

Nano-scale gap filling and mechanism of deposit-etch-deposit process for phase-change material

Ge2Sb2Te5 gap filling is one of the key processes for phase-change random access memory manufacture. Physical vapor deposition is the mainstream method of Ge2Sb2Te5 film deposition due to its advantages of film quality, purity, and accurate composition control. However,the conventional physical vapor deposition process cannot meet the gap- filling requirement with the critical device dimension scaling down to 90 nm or below. In this study, we find that the deposit-etch-deposit process shows better gap-filling capability and scalability than the single-step deposition process, especially at the nano-scale critical dimension. The gap-filling mechanism of the deposit-etch-deposit process was briefly discussed. We also find that re-deposition of phase-change material from via the sidewall to via the bottom by argon ion bombardment during the etch step was a key ingredient for the final good gap filling. We achieve void-free gap filling of phase-change material on the 45-nm via the two-cycle deposit-etch-deposit process. We gain a rather comprehensive insight into the mechanism of deposit-etch-deposit process and propose a potential gap-filling solution for over 45-nm technology nodes for phase-change random access memory.

MICRO ELECTRICAL DISCHARGE MACHINING DEPOSITION IN AIR

A new deposition method is described using micro electrical discharge machining （EDM） to deposit tool electrode material on workpiece in air. The basic principles of micro electrical discharge deposition （EDD） are analyzed and the realized conditions are predicted. With an ordinary EDM shaping machine, brass as the electrode, high-speed steel as the workpiece, a lot of experiments are carried out on micro EDD systematically and thoroughly. The effects of major processing parameters, such as the discharge current, discharge duration, pulse interval and working medium, are obtained, As a result, a micro cylinder with 0.19 mm in diameter and 7.35 mm in height is deposited. By exchanging the polarities of the electrode and workpiece the micro cylinder can be removed selectively. So the reversible machining of deposition and removal is achieved, which breaks through the constraint of traditional EDM. Measurements show that the deposited material is compact and close to workpiece base, whose components depend on the tool electrode, material.

Post-depositional modification of NO_3 in snow layers at EastAntarctica and atthe headwater of Urumqi Rive

Acidic species, such as Nitrate, in polar snow and firn layers are “reversibly” deposited, and are sufficiently volatile to undergo significant post depositional exchange between snow/firn and the atmosphere. Through comparison of the snowpit and snowpack nitrate concentrations from central East Antarctica and the headwater of rumqi River, we conclude that the nitrate peaks in the uppermost surface snow layers in central Antarctica are not related to an atmospheric signal and must account for post depositional effects. Such effects, however, are not found in the surface snowpack nitrate profiles from the headwater of rumqi River. Two reasons may account for the post depositional difference. At first, nitrate in the polar snow and firn layers appears to be hydrated ion, which can be taken up by the atmosphere, while at the headwater of rumqi River it seems mainly as mineral ion, which assembles the behavior of aerosol derived species that are “irreversibly” deposited and do not undergo significant post depositional exchange with the atmosphere. Secondly, the chemical features of the snow and ice on the Antarctica are mainly determined by wet deposition, to the contrary, dry deposition is more significant at the headwater of rumqi River than that on the East Antarctic Plateau.

The Metallogenetic Processes and Environment of a Large Ag-V Deposit in Black Rock Series

Located in Western Hubei Province,this deposit is a large-scale Ag-V ore deposit,listed among the fifth type of silver deposit in China.1 Geological Characteristics It lies in the NE sector of the Yangtze flat of the Yangtze paraplatform.There are sporadically magmatic rocks and fold basement made up of upper Archaeozoicmiddle and lower Proterozoic strata.The sedimentary cover consists of Sinian-lower Paleozoic marine sediments,Mesozoic-Cenozoic intercalated marine and nonmarine sediments or nonmarine sediments.

Pore Formation Mechanism in W-C Hard Coatings Using Directed Energy Deposition on Tungsten Alloy

Porosity is a common phenomenon and can significantly hinder the quality of the coating.Here,the pore formation mechanism and the characteristics of the single tracks of the W-C coating using directed energy deposition(DED)are systematically investigated.The forming quality of the tracks,the distribution of the pores,and the elemental distribution near the pores are analyzed by the observations of the cross-sections of the tracks.The temperature field of the melt pool is discussed comprehensively to reveal the pore formation mechanism.The results confirm that Ni and Co evaporated during the DED process due to the high temperature of the melt pool.Pores were continuously produced adjacent to the fusion line when the melt pool was about to solidify since the temperature at the solidification front was higher than the boiling point of Ni.The vaporization area at the fusion line was proposed,where Ni could also evaporate at the time the melt pool started to solidify.The relationship between the solidification rate,the size of the vaporization area and the DED parameters(laser power and scanning speed)was established to discuss the causes of severe pores above the fusion line.This work contains a practical guide to reduce or eliminate the porosity in the coating preparation process on the surface of the tungsten alloy.

Structural, Optical and Electrical Properties of Li-doped ZnO Thin Films Influenced by Annealing Temperature

Li-doped ZnO thin films had been grown by radio frequency magnetron sputtering and then annealed under various annealing temperatures. The characteristics of ZnO films were examined by XRD, FESEM, Hall measurement and optical transmission spectra. Results showed that p type conduction was observed in Li doped ZnO films annealed at 500-600 ℃ and thep type ZnO films possessed a good crystalline with c-axis orientation, dense surface, and average transmission of about 85% in visible spectral region.

Structural and optical properties of AlN sputtering deposited on sapphire substrates with various orientations

AlN thin films were deposited on c-,a-and r-plane sapphire substrates by the magnetron sputtering technique.The in-fluence of high-temperature thermal annealing(HTTA)on the structural,optical properties as well as surface stoichiometry were comprehensively investigated.The significant narrowing of the(0002)diffraction peak to as low as 68 arcsec of AlN after HTTA implies a reduction of tilt component inside the AlN thin films,and consequently much-reduced dislocation densities.This is also supported by the appearance of E2(high)Raman peak and better Al-N stoichiometry after HTTA.Furthermore,the in-creased absorption edge after HTTA suggests a reduction of point defects acting as the absorption centers.It is concluded that HTTA is a universal post-treatment technique in improving the crystalline quality of sputtered AlN regardless of sapphire orienta-tion.

Fabrication and characterization of Al–Mn superconducting films for applications in TES bolometers

Superconducting transition edge sensor(TES)bolometers require superconducting films to have controllable transition temperatures T_(c)in different practical applications.The value of T_(c)strongly affects thermal conductivity and thermal noise performance of TES detectors.Al films doped with Mn(Al-Mn)of different concentrations can accomplish tunable T_(c)A magnetron sputtering machine is used to deposit the Al-Mn films in this study.Fabrication parameters including sputtering pressure and annealing process are studied and their influences on T_(c)and superconducting transition widthΔT_(c)are optimized.The Al-Mn films withΔT_(c)below 1.0 mK for T_(c)in a range of 520 mK-580 mK are successfully fabricated.

CONCENTRATION CHARACTERISTICS OF SOLUBLE IMPURITIES IN THE SURFACE SNOW OF COLLINS ICE CAP, KING GEORGE ISLAND, ANTARCTICA

Measurements carried out for the upper 10m firn/ice obtained at the main dome of Collins Ice Cap, King George Island, Antarctica revealed the direct relation of soluble impurities of snow mass to the composition of atmosphere aerosols. It was indicated that sea salt source dominates the atmosphere aerosol around Collins Ice Cap.The simultaneous variation shown by the concentration profiles of Na+ , K+ , Mg2+ , Ca2+, SO42-, Cl- , Br- and very close EF values (≈1) suggested their common marine source and similar deposition process. Besides the possible surface contamination,NH4+ varied uniformly along deeper part of the core in concentration, which could be considered as background value of ammonium. A satisfactory explanation for NO3- concentration profile has not reached at present.

Controlling the electronic structure of SnO_2 nanowires by Mo-doping

Mo-doped SnO2 （MTO） nanowires are synthesized by an in-situ doping chemical vapour deposition method. Raman scattering spectra indicate that the lattice symmetry of MTO nanowires lowers with the increase of Mo doping, which implies that Mo ions do enter into the lattice of SnO2 nanowire. Ultraviolet-visible diffuse reflectance spectra show that the band gap of MTO nanowires decreases with the increase of Mo concentration. The photoluminescence emission of SnO2 nanowires around 580~nm at room temperature can also be controlled accurately by Mo-doping, and it is extremely sensitive to Mo ions and will disappear when the atomic ratio reaches 0.46%.