Improved PSO algorithm based on chaos theory and its application to design flood hydrograph

The deficiencies of basic particle swarm optimization （bPSO） are its ubiquitous prematurity and its inability to seek the global optimal solution when optimizing complex high-dimensional functions. To overcome such deficiencies, the chaos-PSO （COSPSO） algorithm was established by introducing the chaos optimization mechanism and a global particle stagnation-disturbance strategy into bPSO. In the improved algorithm, chaotic movement was adopted for the particles＇ initial movement trajectories to replace the former stochastic movement, and the chaos factor was used to guide the particles＇ path. When the global particles were stagnant, the disturbance strategy was used to keep the particles in motion. Five benchmark optimizations were introduced to test COSPSO, and they proved that COSPSO can remarkably improve efficiency in optimizing complex functions. Finally, a case study of COSPSO in calculating design flood hydrographs demonstrated the applicability of the improved algorithm.

Impacts of water surface area of watershed on design flood

In order to analyze the impact of the water surface area of a watershed on the design flood, the watershed was classified into a land watershed and a water surface watershed for flood flow calculation at the same time interval. Then, the design flood of the whole watershed was obtained by adding the two flood flows together. Using this method, we calculated design floods with different water surface areas of three reservoirs and analyzed the impact of water surface area on the flood volume and peak flow. The results indicate that larger water surface areas lead to greater impacts on the flood volume and peak flow. For the same watershed area, the impact of water surface area on the flood volume and peak flow is positively proportional to the flood frequency, i.e., the higher the frequency, the greater the impact becomes.

Regional Design Storm and Flood Modelling—Risk Implications in Ungauged Catchments

Most planned developments in a catchment for control of excess water using a culvert, bridge or dam spillway are located at a site in a stream where there are no discharge measurements. Even though, for gauged catchments a number of established flood frequency models and rainfall-runoff models do exist, for ungauged catchments mostly regional flood frequency and event-based rainfall-runoff models are used, which depend on regional parameters. In this paper, a regional approach for design floods is presented and risk implication for design of drainage structures assessed. A case study in light of the above has been considered at four ungauged sites in the Limpopo Drainage Basin in north-eastern Botswana.

Design flood of ungauged basins based on DEM

In this paper,the northern mountainous area of Fuzhou City which is an ungauged basin has been taken for example to discuss the method of design flood calculation by means of combining the DEM(digital elevation model) and the Xin'anjiang Model(three components).The problem of estimating the parameters of the runoff model has been solved by using the parameters of the reference station.In the conflux calculation,the isochrones are obtained by DEM which helps to avoid the cumbersome work of drawing them on the map.With the establishment of the digital elevation model throughout the country,it is practically significant to use it in the hydrological estimation.

Research on Flood Control Design Based on Joint Distribution of Flood Levels and Flood Peak Discharges

The return level of the joint distribution of flood levels and flood peak discharges was analyzed by Archimedean Gumbel-Hougaard copula and Kendall distribution functions.Using the annual maximum level(H)and discharge(Q)of flood peak at Boluo Hydrologic Station in the Dongjiang River in last 56 years,the"OR"return period,"AND"return period and Kendall return period of their joint distribution and the most likely design flood value were calculated.The main conclusions of this study can be summarized as follows:the Kendall return period can more accurately reflect the risk rate of the combination of flood elements,relative to"OR"return period and"AND"return period.The design value of univariate flood element based on the current specification can meet the design standard.While the design value calculated according to"OR"return period was on the high side,and the design value calculated by the"AND"return period was on low side.Based on the principle of maximum probability,the calculated design value of Kendall return period under the different combinations of flood peak discharge and water level can provide new options for flood control project safety and risk management.