Seismic fragility assessment of RC frame structure designed according to modern Chinese code for seismic design of buildings

Following several damaging earthquakes in China, research has been devoted to find the causes of the collapse of reinforced concrete （RC） building sand studying the vulnerability of existing buildings. The Chinese Code for Seismic Design of Buildings （CCSDB） has evolved over time, however, there is still reported earthquake induced damage of newly designed RC buildings. Thus, to investigate modern Chinese seismic design code, three low-, mid- and high-rise RC frames were designed according to the 2010 CCSDB and the corresponding vulnerability curves were derived by computing a probabilistic seismic demand model （PSDM）.The PSDM was computed by carrying out nonlinear time history analysis using thirty ground motions obtained from the Pacific Earthquake Engineering Research Center. Finally, the PSDM was used to generate fragility curves for immediate occupancy, significant damage, and collapse prevention damage levels. Results of the vulnerability assessment indicate that the seismic demands on the three different frames designed according to the 2010 CCSDB meet the seismic requirements and are almost in the same safety level.

BioTRIZ Suggests Radiative Cooling of Buildings Can Be Done Passively by Changing the Structure of Roof Insulation to Let Longwave Infrared Pass

This paper demonstrates the application of a design tool called BioTRIZ. Its developers claim that it can be used to access biological strategies for solving engineering problems. Our aim is to design a roof for hot climates that gets free cooling through radiant coupling with the sky. The insulation in a standard roof stops the sun and convection from warming the thermal mass. But it also restricts the mass＇s longwave view of the cool sky. Different solutions to this conflict are offered by BioTRIZ. The chosen solution is to replace the standard insulation component with an open cell honeycomb. The vertical cells would allow longwave radiation to pass, while arresting convection. The solutions offered by BioTRIZ＇s technological counterpart include no such changes in structure. It is estimated that the thermal mass in the biomimetic roof would remain on average 4.5℃ cooler than in a standard roof over a year in Riyadh, Saudi Arabia.

Study on key techniques on ecological renovation design of existing buildings in China

With the rapid development of China economy and critical ecological situation in China,ecological renovation of existing buildings has become a special important topic. Key techniques on ecological renovation design of existing buildings in China are explored in this paper. Special attention is paid to specific treatments suitable for China.

Zero-Energy-Buildings in Different Climates： Design Strategies, Simulation and Prognosis METHOD for Energy Demand

The European Directive 2010/31 claims that by 2020 only （nearly-） ZEB （zero-energy-buildings） may be built. To reach this goal, it is pertinent for buildings to be energetically optimized first. The remaining energy demand must then be covered by on-site renewable energies （PV, geothermal, etc.）. With the area of use （energy demand） and the size of the building envelope/estate （renewable energy supply） in competition with each other, the maximum number of building stories will be most likely limited. For 15 different climatic locations worldwide, the energy demand of optimised office rooms has been simulated and compared with the possible renewable energy production on site. For every location, a good correlation has been found between the simulated energy demand and data like heating and cooling degree hours. Correspondent linear equations are given here. As another result, the maximum numbers of possible stories for ZEBS have been derived, being between 3 and 10 depending on the location.

Application of Green Building Design in Residential Buildings

In recent years,with the rapid development of the world economy,the environment and resources have been seriously damaged,and the global climate is changing quietly.People began to pay more and more attention to the protection of environment and resources.In the process of building residential buildings,the construction industry also needs to strengthen the application of green building design,so as to achieve the purpose of green environmental protection.The author makes an in-depth research and analysis on the characteristics of green building design,and puts forward the effective strategies for the application of green building design in residential buildings,hoping to help improve the green environmental protection of residential buildings.

Preliminary Study on Overseas Applicability of Chinese Architectural Design Standards:Taking China-Aided Construction Projects in Asia Since the Belt and Road Initiative as Examples

This research takes China-aided construction projects in Asia since the Belt and Road Initiative as examples to explore the applicability of Chinese architectural design standards in other Asian countries.So far,the standards demonstrated the highest applicability in South Asia is the best followed by Southeast Asia.Chinese architectural design standards for educational buildings showed the highest applicability,followed by office,medical,and sports buildings.This study puts forward some strategies to improve the applicability of Chinese architectural design standards.These strategies include integrating regionalism and local cultural traditions,optimizing energy efficiency,and aligning designs with local usage habits.This study serves as a reference for similar projects in the future.

Practice Exploration of Green Building Design in Prefabricated Residential Building Design

Prefabricated residential building design fully embodies the concept of green building and aligns with China’s strategic plan for sustainable development.However,there is a need to further optimize green building design methods,enhance the design quality of prefabricated residential buildings,and improve energy and resource utilization.Compared to traditional construction methods,prefabricated residential building design still faces several challenges during the actual construction process.These challenges include difficulties in design,material selection and processing,and the high demands for construction coordination.To strengthen the application of green building concepts in prefabricated residential design and effectively promote the sustainable development of the construction industry,this paper discusses practical measures for implementing green building design in prefabricated residential projects for reference.

Integration Mechanism of Ideological and Political Education with Specialized Knowledge in the Course of Green Building Design

This paper aims to explore the integration of ideological and political education with specialized knowledge in the course of green building design.Through an analysis of the green building design course,combined with the current social development background and the need for ecological and environmental protection,the study investigates how to effectively integrate ideological and political education elements into course instruction to enhance the comprehensive quality and green design capabilities of architecture students.The paper analyzes the content and characteristics of the green building design course and proposes an integration mechanism for ideological and political education in green building design teaching,aiming to cultivate architecture talents with green design concepts and good ideological and political qualities.

Exploration of Energy-Saving Technologies in Building Electrical System Design

Green energy conservation is the mainstream trend in the current development of the construction industry.The application of energy-saving technology in building electrical system design can effectively reduce energy consumption,avoid unnecessary energy consumption,and truly achieve energy conservation and environmental protection.Based on this,the article elaborates on the principles of energy-saving design in building electrical systems,and actively explores the application of energy-saving technologies from different perspectives such as optimizing power supply and distribution system design,adopting high-efficiency energy-saving lighting equipment,applying renewable energy,promoting smart home technology,and improving the efficiency of building electrical equipment.

A COMPARATIVE STUDY:DESIGN STRATEGIES FOR ENERGY-EFFICIENCY OF HIGH-RISE OFFICE BUILDINGS

Tall buildings are being designed and built across a wide range of cities.A poorly designed tall building can tremendously increase the building’s appetite for energy.Therefore,this paper aims to determine the design strategies that help a high-rise office building to be more energy efficient.For this purpose,a comparative study on twelve case buildings in three climate groups(temperate,sub-tropical&tropical)was performed.The exterior envelope,building form and orientation,service core placement,plan layout,and special design elements like atria and sky gardens were the subject of investigation.effectiveness of different design strategies for reducing the cooling,heating,ventilation and electric lighting energy usage.Finally,lessons from these buildings’were defined for the three climates.Furthermore,a compari-son of building energy performance data with international benchmarks confirmed that in temperate and sub-tropical climates sustainable design strategies for high-rise buildings were performing well,as a result leading to lower energy consump-tion.However,for the tropics the design of high-rise buildings needs additional consideration.

湖北省绿色校园中建筑技术现状与适宜性分析

随着我国中小学绿色建筑的高速推进,绿色校园成为校园建设的发展趋势。本文通过调研分析了在绿色建筑技术校园中的使用现状,采用Design Building(DB)进行能耗模拟,选择典型教学楼对外围护结构传热系数、窗墙比、建筑朝向等进行了适宜性分析。基于此,将最优节能方案与基础模型对比,发现建筑的建筑能耗降低了16.29%。研究结论为绿色建筑技术在绿色校园中的应用与适宜性分析提供一定的理论意义和数据支撑。

FIDIC new conditions of contract and their applying prospects for the construction industry in China

In this paper, the author gives a brief introduction to the evolution of FIDIC conditions of contract, particularly the background of the 1999 new editions. A detailed discussion is made of the applying prospects referring to the new editions of FIDIC Conditions of Contract in China in 6 aspects: revisions of the existing model contract forms; finding solutions to the payment delay problem; advocating the Design/Build and EPC turnkey project delivery system; clarifying the roles of supervising engineers and opening up the new regions of their work. This paper also prepares a short form model contract for small projects in China, improving the settlement of construction disputes.

Neighborhood and Adaptation to Climate Change： A Case Study of Adelaide

Extreme weather is expected to be widespread by the year 2100 due to changes in precipitation and temperature, and rising sea levels. It is expected that there will be more heat waves, floods, bush fires, coastal erosion and drought. Unfortunately, Australia is vulnerable to climate change due its hot and dry climate and as the driest state; changes are already being felt in South Australia. There is an urgent need to start adapting to climate change to cope with present and predicted climate change in the future by changing or adjusting building regulations, land use plans, and land subdivision regulations. This paper aims to provide design guidelines for adaptation to climate change at the neighborhood level. A case study method was adopted to achieve the aim of this paper. The study was conducted in two stages. The first stage presents the current design of neighborhood and its adopted design parameters for climate change. The second part provides the design guidelines for adaptation to climate change at the neighborhood level. The case study has a well oriented grid iron layout that serves as the basis of orienting and sitting future buildings that can adapt to climate change. However, the orientation of roads is good, it will be necessary to reconfigure elements of landscaping and built environment in order to address climate change in built environment by modifying design elements.

Exploration on Design of Waterfront Landscape and Building in Xianghu Lake Park of Nanchang City

Wa terfront park is an important composition of current urban ecological tourism in China,which sufficiently reveals the economic development situation of the city and the leisure culture life of the masses,and embodies rich regional cultural characteristics.Taking Xianghu Lake Park of Nanchang City as the example,design features of its water landscape and building are analyzed and explored.The design fol ows the principle of utilization function combining with artistry,pa ys attention to plane layout and spatial organization,and retains classical architectural style of the building.

Impact of Risk on Performance of Design and Build Projects in Lagos State, Nigeria

＂Design and Build＂ procurement method has been in use in Nigeria and this method has been latent with a lot of risks. This study intends to identify the risk inherent in ＂Design and Build＂ and also to evaluate the impact of the identified risks on project performance. A descriptive research survey is undertaken for this study. Snowballing sampling technique was used via the use of questionnaires. Population of the study includes contracting organizations, consultants and clients＇ organizations that are recently involved in ＂Design and Build＂ projects. A total of 39 questionnaires were distributed and 27 were returned and used for the analysis. Statistical Package for Social Sciences was used for analyzing the data collected. Descriptive statistical tool of mean item score was employed for the analysis. The results show that the most prominent risk is change in quantity/scope of work in terms of cost related risk while in terms of time related risks the most prominent risk is design changes. Errors and omissions during construction are the risks prominent in terms of quality. In conclusion, ＂Design and Build＂ procurement has a lot of inherent, unresolved and undefined cost, time and quality related factors that can trigger off risks that will affect performance of DB project. Implications of this study to practitioners in the construction is such that the findings of this study can create awareness for stakeholders and construction practitioners of the prominent risks that affect DB projects and this can help in better management of future DB projects in Nigeria and other developing countries. Design and Build procurement in spite of these plethora of risks is still strongly recommended for clients, stakeholders and other practitioners in the construction industry for use in their future projects. This procurement method delivers project faster, within cost and offers good quality of workmanship and product to users of this method.

Residential Revitalization through the Universal Heuristic Evaluation Model （UHEM）

The study aims to propose using a universal heuristic evaluation model （UHEM） to improve the functional and physical performance of residential buildings. Since, ＂everyone should be able to enter and use any part of the built environment as independently and naturally as possible＂, the old buildings should be revitalized with respect to an inclusive approach. However, research on current design practice showed that there is a lack of systematic evaluation and revitalization methods. Hence, the main objective of the proposed UHEM model is to evaluate existing residential environments and requalify them with respect to an inclusive approach. The study concludes by highlighting the importance of UHEM from two points of view： （i） the importance of a systematic evaluation approach to effectively deal with the challenge of requalifying the residential environments and （ii） the designers＇ key role during the revitalization process.

Low Carbon Building Design Optimization Based on Intelligent Energy Management System

The construction of relevant standards for building carbon emission assessment in China has just started,and the quantitative analysis method and evaluation system are still imperfect,which hinders the development of low-carbon building design.Therefore,the use of intelligent energy management system is very necessary.The purpose of this paper is to explore the design optimization of low-carbon buildings based on intelligent energy management systems.Based on the proposed quantitative method of building carbon emission,this paper establishes the quota theoretical system of building carbon emission analysis,and develops the quota based carbon emission calculation software.Smart energy management system is a low-carbon energy-saving system based on the reference of large-scale building energy-saving system and combined with energy consumption.It provides a fast and effective calculation tool for the quantitative evaluation of carbon emission of construction projects,so as to realize the carbon emission control and optimization in the early stage of architectural design and construction.On this basis,the evaluation,analysis and calculation method of building structure based on carbon reduction target is proposed,combined with the carbon emission quota management standard proposed in this paper.Taking small high-rise residential buildings as an example,this paper compares and analyzes different building structural systems from the perspectives of structural performance,economy and carbon emission level.It provides a reference for the design and evaluation of low-carbon building structures.The smart energy management system collects user energy use parameters.It uses time period and time sequence to obtain a large amount of data for analysis and integration,which provides users with intuitive energy consumption data.Compared with the traditional architectural design method,the industrialized construction method can save 589.22 megajoules(MJ)per square meter.Based on 29270 megajoules(MJ)per ton of standard coal,the construction area of the case is about 8000 m2,and the energy saving of residential buildings is 161.04 tons of standard coal.This research is of great significance in reducing the carbon emission intensity of buildings.

Unfolding Evolution Strategically in Integrated Studios of Building and Design to Innovative Grasp of Design Creativity

In emergence of design, it is undoubted to be informed from nature for how things get done. But in architecture, the students are not used to start up with biological investigation. Instead of analogues, it is permitted to pursue an evolvability systematics for built emerge. The systematics relies upon the key assumptions of Kirschner who sought the characteristics of biological evolution. For an integrated design thinking of an architectural mind, this is a methodological study, which strategically adapts living forms＇ evolvability capacity to built-forms＇ structural emergence. The study outlines the evolution strategy with experimental studios of building and design. The preceding systematic is taught in distinguished courses. It is purposed to build an easy-to-apply framework for how to generate novel structures and how the spatial structure units are organized to emerge with an imagined nature as novel tectonic model. Besides, building up structural thinking into the consilience of evolution strategy, the study is also distinguished for understanding the value system of architectural mind to diagnose the genuine character of inventive built form. Strategy constructs processes. Thinking strategy concludes by the evolvability directives of studio assignments and they are given as flow-charts and project models.

Undergraduate Design and Analysis of a LEED Certified Building

In this technical and educational research endeavor, a diverse group of civil engineering students took on the role of creating the means and methods of producing a successful building design. Architectural, structural, and environmental designs were primarily performed. This was followed by detailed cost analysis with the intent of providing a realistic cost comparison by pricing the intended building, using traditional material and typical building methods, versus pricing the building using recycled material and new present-day technology. Some green features needed to achieve a LEED (Leadership in Energy and Environmental Design) gold certification were considered and applied. It is shown that producing a green building is more costly in present circumstances;however, the additional cost due to greenification pays itself off throughout the years giving in return saving features. Even though the design of a green building comes with detailed planning and costly material, it does generate benefits for the building owner, the society, and most importantly the environment.

Evaluation （POE） of Yildiz Technical University （YTU） School of Foreign Languages （SFL）

This paper deals with the post-occupancy performance evaluation of the SFL （School of Foreign Languages） that was designed by the authors and is located within the YTU （Yildiz Technical University） Davutpaa campus in Istanbul. After the completion and occupation of the building, project review came into question and a POE was performed. Post-occupancy performance evaluation tries to answer the questions of space provision for social interaction： ＂How is this building working？＂ ＂Is it intended？＂ ＂How can it be improved？＂ and ＂How can future buildings be improved？＂ Answers to these vital questions are searched under four main sections. In the first section, the study discusses the physical location and functional properties of the building, in the second, the design decisions of the building are discussed in the context of and design principles, in the third, the method of performance evaluation is explained, and in the final section, the results are analyzed and discussed. These results will lead to a path to improve the quality of the building.