A Custom Manipulator for Dental Implantation Through Model-Based Design

This paper presents a Model-Based Design(MBD)approach for the design and control of a customized manipulator intended for drilling and position-ing of dental implants accurately with minimal human intervention.While performing an intra-oral surgery for a prolonged duration within a limited oral cavity,the tremor of dentist's hand is inevitable.As a result,wielding the drilling tool and inserting the dental implants safely in accurate position and orientation is highly challenging even for experienced dentists.Therefore,we introduce a customized manipulator that is designed ergonomically by taking in to account the dental chair specifications and anthropomorphic data such that it can be readily mounted onto the existing dental chair.The manipulator can be used to drill holes for dental inserts and position them with improved accuracy and safety.Further-more,a thorough multi-body motion analysis of the manipulator was carried out by creating a virtual prototype of the manipulator and simulating its controlled movements in various scenarios.The overall design was prepared and validated in simulation using Solid works,MATLAB and Simulink through Model Based Design(MBD)approach.The motion simulation results indicate that the manipulator could be built as a prototype readily.

Model Design and Development of a Telescopic Palm Fruit Harvester

This research paper presents a comprehensive conceptual design approach for the development of a telescopic machine system, which is portable and will provide a safe method of harvesting palm fruits. For this machine system development, the material for each component of the machine system was first selected, the boom length, maximum boom angle, force and stroke length of each hydraulic cylinder, the hydraulic pump pressure, base weight, permissible weight of the cutting system and power required were then calculated in the design analysis. Furthermore, from the calculated parameters, the model of the system was created using SolidWorks engineering software, the model was developed and tested. The result shows that the cutting time of the system for one bunch of palm fruit was longer when compared to conventional systems. It was concluded that though the machine is maintenance friendly and portable, further improvements in its design are necessary so as to develop a system that will give desirable economic output at a shorter time.

Multi-Objective Optimization of Aluminum Alloy Electric Bus Frame Connectors for Enhanced Durability

The widespread adoption of aluminumalloy electric buses,known for their energy efficiency and eco-friendliness,faces a challenge due to the aluminum frame’s susceptibility to deformation compared to steel.This issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries,necessitating robust frame protection.Our study aims to optimize the connectors of aluminum alloy bus frames,emphasizing durability,energy efficiency,and safety.This research delves into Multi-Objective Coordinated Optimization(MCO)techniques for lightweight design in aluminum alloy bus body connectors.Our goal is to enhance lightweighting,reinforce energy absorption,and improve deformation resistance in connector components.Three typical aluminum alloy connectors were selected and a design optimization platform was built for their MCO using a variety of software and methods.Firstly,through three-point bending experiments and finite element analysis on three types of connector components,we identified optimized design parameters based on deformation patterns.Then,employing Optimal Latin hypercube design(OLHD),parametric modeling,and neural network approximation,we developed high-precision approximate models for the design parameters of each connector component,targeting energy absorption,mass,and logarithmic strain.Lastly,utilizing the Archive-based Micro Genetic Algorithm(AMGA),Multi-Objective Particle Swarm Optimization(MOPSO),and Non-dominated SortingGenetic Algorithm(NSGA2),we explored optimized design solutions for these joint components.Subsequently,we simulated joint assembly buckling during bus rollover crash scenarios to verify and analyze the optimized solutions in three-point bending simulations.Each joint component showcased a remarkable 30%–40%mass reduction while boosting energy absorption.Our design optimization method exhibits high efficiency and costeffectiveness.Leveraging contemporary automation technology,the design optimization platform developed in this study is poised to facilitate intelligent optimization of lightweight metal components in future applications.

Thermal Dissipation Modelling and Design of ITER PF Converter Alternating Current Busbar

Because the larger metallic surrounds are heated by the eddy current, which is generated by the AC current flowing through the AC busbar in the International Thermonuclear ExperimentM Reactor （ITER） poloidal field （PF） converter system, shielding of the AC busbar is required to decrease the temperature rise of the surrounds to satisfy the design requirement. Three special types of AC busbar with natural cooling, air cooling and water cooling busbar structure have been proposed and investigated in this paper. For each cooling scheme, a 3D finite model based on the proposed structure has been developed to perform the electromagnetic and thermal analysis to predict their operation behavior. Comparing the analysis results of the three different cooling patterns, water cooling has more advantages than the other patterns and it is selected to be the thermal dissipation pattern for the AC busbar of ITER PF converter unit. The approach to qualify the suitable cooling scheme in this paper can be provided as a reference on the thermal dissipation design of AC busbar in the converter system.

Modeling and Hardware-in-the-Loop System Realization of Electric Machine Drives-A Review

This paper presents a state-of-the-art review in modeling approach of hardware in the loop simulation(HILS)realization of electric machine drives using commercial real time machines.HILS implementation using digital signal processors(DSPs)and field programmable gate array(FPGA)for electric machine drives has been investigated but those methods have drawbacks such as complexity in development and verification.Among various HILS implementation approaches,more efficient development and verification for electric machine drives can be achieved through use of commercial real time machines.As well as implementation of the HILS,accurate modeling of a control target system plays an important role.Therefore,modeling trend in electric machine drives for HILS implementation is needed to be reviewed.This paper provides a background of HILS and commercially available real time machines and characteristics of each real time machine are introduced.Also,recent trends and progress of permanent magnet synchronous machines(PMSMs)modeling are presented for providing more accurate HILS implementation approaches in this paper.

MODELING, VALIDATION AND OPTIMAL DESIGN OF THE CLAMPING FORCE CONTROL VALVE USED IN CONTINUOUSLY VARIABLE TRANSMISSION

Associated dynamic performance of the clamping force control valve used in continuously variable transmission （CVT） is optimized. Firstly, the structure and working principle of the valve are analyzed, and then a dynamic model is set up by means of mechanism analysis. For the purpose of checking the validity of the modeling method, a prototype workpiece of the valve is manufactured for comparison test, and its simulation result follows the experimental result quite well. An associated performance index is founded considering the response time, overshoot and saving energy, and five structural parameters are selected to adjust for deriving the optimal associated performance index. The optimization problem is solved by the genetic algorithm （GA） with necessary constraints. Finally, the properties of the optimized valve are compared with those of the prototype workpiece, and the results prove that the dynamic performance indexes of the optimized valve are much better than those of the prototype workpiece.

HYPERSTATIC STRUCTURE MAPPING MODEL BUILDING AND OPTIMIZING DESIGN

Hyperstatic structure plane model being built by structural mechanics is studied. Space model precisely reflected in real stress of the structure is built by finite element method （FEM） analysis commerce software. Mapping model of complex structure system is set up, with convenient calculation just as in plane model and comprehensive information as in space model. Plane model and space model are calculated under the same working condition. Plane model modular construction inner force is considered as input data; Space model modular construction inner force is considered as output data. Thus specimen is built on input data and output dam. Character and affiliation are extracted through training specimen, with the employment of nonlinear mapping capability of the artificial neural network. Mapping model with interpolation and extrpolation is gained, laying the foundation for optimum design. The steel structure of high-layer parking system （SSHLPS） is calculated as an instance. A three-layer back-propagation （BP） net including one hidden layer is constructed with nine input nodes and eight output nodes for a five-layer SSHLPS. The three-layer structure optimization result through the mapping model interpolation contrasts with integrity re-analysis, and seven layers structure through the mapping model extrpulation contrasts with integrity re-analysis. Any layer SSHLPS among 1-8 can be calculated with much accuracy. Amount of calculation can also be reduced if it is appfied into the same topological structure, with reduced distortion and assured precision.

PARTICLE SWARM OPTIMIZATION BASED ON PYRAMID MODEL FOR SATELLITE MODULE LAYOUT

To improve the global search ability of particle swarm optimization （PSO）, a multi-population PSO based on pyramid model （PPSO） is presented. Then, it is applied to solve the layout optimization problems against the background of an international commercial communication satellite （INTELSAT-Ⅲ） module. Three improvements are developed, including multi-population search based on pyramid model, adaptive collision avoidance among particles, and mutation of degraded particles. In the numerical examples of the layout design of this simplified satellite module, the performance of PPSO is compared to global version PSO and local version PSO （ring and Neumann PSO）. The results show that PPSO has higher computational accuracy, efficiency and success ratio.

Types and Models of Product-Service System in Design Agencies

Product-service system design(PSSD)plays a significant role in both design theory and practice with increasing importance.Although scholars have made significant efforts to delineate its definition,methods,and applications,misunderstandings about PSSD persist widely across design agencies and academia.This study aims to outline the various types and models of product-service systems(PSSs)based on inputs from product design agencies.To achieve this purpose,this study applies a two-step research method,comprising a Q-sorting procedure followed by hypothesis testing.This allows us to study the business scope and design model of each design agency from a field research perspective.We propose a design framework with four basic types of PSSs,11 extended types of PSSs,and 4P-8D PSSD models.The current study has theoretical and practical implications.For academics,our models are clearly classified and validated.For practitioners,our models of PSSs can support design agencies in clearly recognizing their position within the design industry,allowing them to select the appropriate types and models to facilitate their future development.Our study also provides helpful guidances for college graduates,cutting-edge designers,and new design studios.

The Design of a Three-Dimensional Physical Modeling System for Real-Time Groundwater Flows

In the past decades,physical modeling has been widely used in hydrogeology for teaching,studying and exhibition purposes.Most of these models are used to illustrate hydrogeological profiles,but few can depict three-dimensional groundwater flows,making it impossible to validate groundwater flows simulated by numerical methods with physical modeling.

Angular Position Controller and Its Design Model Verification for the Electro-Hydraulic Servo Control System

The angular position controller is system （EHSAS） to control the output of the rotary applied to electro-hydraulic servo actuator actuator. It works as a compensator based on the frequency response of the EHSAS. Its design model is verified on the state-space model of EHSAS by using simulation program SIMULINK. Real data used to test the system. Simulation results give a good agreement for the controller and also for the state-space model.

A Generic Design Model for Evolutionary Algorithms

A generic design model for evolutionary algorithms is proposed in this paper. The model, which was described by UML in details, focuses on the key concepts and mechanisms in evolutionary algorithms. The model not only achieves separation of concerns and encapsulation of implementations by classification and abstraction of those concepts, it also has a flexible architecture due to the application of design patterns. As a result, the model is reusable, extendible, easy to understand, easy to use, and easy to test. A large number of experiments applying the model to solve many different problems adequately illustrate the generality and effec-tivity of the model.

Modelling Design of Color Graphics Books Using Visual Vocabulary Based on Children’s Color Language Preferences

Color language has important meaning for children’s picture books.Understanding children’s preferences in terms of color language will be helpful when designers model computerized picture books in order to adapt to children’s visual senses and effectively stimulate children’s interest in reading.In this study,we aimed to further explore the general characteristics of children’s preference for colors,color depth and color matching forms in picture books.For the study,256 children between the ages of three and six were selected and divided into four groups.According to the implementation needs of the children’s color preference test,these childrenwere asked to complete a series of tasks so that their choices in the tasks could subsequently be analyzed.The tasks included making the following choices:selecting their preferred colors from nine options(red,orange,yellow,green,cyan,blue,purple,black and white);selecting their preferred color brightness fromthree different color shades;and indicating their preferences in relation to complementary colors,matching colors and pure colors.The experimental results showed that children aged between three and six mainly favor red,blue and yellow,and colors with a high degree of brightness.As children grow older,boys tend to prefer blue,and girls tend to prefer pink,with red remaining the favorite color of both genders.As for complementary colors,matching colors and solid colors,three-to six-year-old children prefer solid colors.In conclusion,it seems that color language preferences in children between the ages of three and six are very similar,which could be of use when designing children’s picture books to match their visual vocabulary and psychological cognition.

A Platform for Collaborative Modeling

A collaborative virtual modeling environment based on VRML is presented as a sugarcane harvester modeling framework, and is illustrated with the implemented software that can using I;EAS, Smarteam, and Conceptual Innovation Design System （CIDS） as the supporting platform, which is powerful enough to meet the demands of different real life applications. It is possible to perform collaborative interactive modifications with concurrent synchronous visualization at each client computer with any required level of detail. The platform provides a product modeling and assembling environment, and the product data among I;EAS, Smarteam and CIDS can be exchanged.

Application of Solid Thinking Evolve in Product Modeling Design

In view of application characteristics of Solid Thinking Evolve in product modeling design, and the practical design of cosmetics packaging, this paper introduced the unique Construction TreeTM, fast, convenient and easy features of Solid Thinking Evolve, and its application prospects in product development.

REVERSE MODELING FOR CONIC BLENDING FEATURE

A novel method to extract conic blending feature in reverse engineering is presented. Different from the methods to recover constant and variable radius blends from unorganized points, it contains not only novel segmentation and feature recognition techniques, but also bias corrected technique to capture more reliable distribution of feature parameters along the spine curve. The segmentation depending on point classification separates the points in the conic blend region from the input point cloud. The available feature parameters of the cross-sectional curves are extracted with the processes of slicing point clouds with planes, conic curve fitting, and parameters estimation and compensation, The extracted parameters and its distribution laws are refined according to statistic theory such as regression analysis and hypothesis test. The proposed method can accurately capture the original design intentions and conveniently guide the reverse modeling process. Application examples are presented to verify the high precision and stability of the proposed method.

Inbound Open Innovation, Business Model Design and Firm Innovation Performance

Through systematic literature review,this study constructs a relationship model of the impact of inbound open innovation on firm innovation performance,and introduced two-dimensional business model design(novelty and efficiency)as mediation variables.It is preliminary confirmed theoretically that inbound open innovation has a positive impact on firm innovation performance,and the rationality of business model playing a mediation role in the relationship between inbound open innovation and innovation performance.Through questionnaire survey and empirical analysis,it is concluded that inbound open innovation has a positive impact on firm innovation performance;Two-dimensional business model design(novelty and efficiency)play a completely positive mediation role in the relationship between inbound open innovation and innovation performance.Based on these findings,this paper developed recommendations for future research.

Modeling of a Lithium-Ion Capacitor and Its Charging and Discharging Circuit in a Model-Based Design

For several years now, electric vehicles (EVs) have been expected to become widely available in the micro-mobility field. However, the insufficiency of such vehicles’ battery-charging and discharging performance has limited their practical use. A hybrid energy storage system, which comprises a capacitor and battery, is a promising solution to this problem;however, to apply model-based designs, which are indispensable to embedded systems, such as the electronic control units used in EVs, a simple and accurate capacitor model is required. Within this framework, a lithium-ion capacitor (LIC) model is proposed, and its charging and discharging performances are evaluated against an actual LIC. The model corresponds accurately to the actual LIC, and the results indicate that the proposed LIC model will work well when used with Model-Based Design (MBD).

MODULE DEFINITION MODEL FOR MODULAR DESIGN AND MANUFACTU－RING OF HEAVY DUTY MACHINE TOOLS

The key techniques of modular design of heavy duty NC mathine tools are described. Amodule definition modelfor modular design and manufacturing of heavy duty NC machine tools isbulit and the essential composition of the module definition model (MDM) is discussed in detail. Itis composed of two models: the part definition model (PDM) and the module assembly model(MAM). The PDM and MAM are built and their structures are given. Using object-oriented know-ledge representation and based on these models, an intelligent support system of modular design forheavy duty NC machine tools is developed and implemented This system has been applied to thepractical use of Wuhan Heavy Duty Machine Tool Works

Adaptive enhancement design of triply periodic minimal surface lattice structure based on non-uniform stress distribution

The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this paper,an adaptive enhancement design method based on the non-uniform stress distribution in structures with uniform thickness is proposed to design the P-type TPMS lattice structures with higher mechanical properties.Two types of structures are designed by adjusting the adaptive thickness distribution in the TPMS.One keeps the same relative density,and the other keeps the same of non-enhanced region thickness.Compared with the uniform lattice structure,the elastic modulus for the structure with the same relative density increases by more than 17%,and the yield strength increases by more than 10.2%.Three kinds of TPMS lattice structures are fabricated by laser powder bed fusion(L-PBF)with 316L stainless steel to verify the proposed enhanced design.The manufacture-induced geometric deviation between the as-design and as-printed models is measured by micro X-ray computed tomography(μ-CT)scans.The quasi-static compression experimental results of P-type TPMS lattice structures show that the reinforced structures have stronger elastic moduli,ultimate strengths,and energy absorption capabilities than the homogeneous P-TPMS lattice structure.