Bitumen was modified with desulfurized crumb rubber (DCR) in the present of reac tive additives. The effect of the kinds and content of the reactive additive on prop erties of DCR modified bitumen (DCRMB) was investi...Bitumen was modified with desulfurized crumb rubber (DCR) in the present of reac tive additives. The effect of the kinds and content of the reactive additive on prop erties of DCR modified bitumen (DCRMB) was investigated. The morphology of DCRMB was characterized by SEM and the changes of the chemical structure of DCRMB wit hout and with the addition of the reactive additive were analyzed by FTIR. The e xperimented results show that the softening point,the elasticity recovery and th e storage stability of DCRMB were improved significantly by the addition of the reactive additive. This is because that a network structure of rubber in DCRMB w as formed and the chemical reaction between C=C double bonds in bitumen and DCR has happened after the reactive additive was added into DCRMB.展开更多
The microstructures of general crumb rubber(CR), dynamic desulfurized crumb rubber(DDCR) and high speed agitation desulfurized crumb rubber(HSADCR) modified bitumens were investigated by a fluorescence microscope, and...The microstructures of general crumb rubber(CR), dynamic desulfurized crumb rubber(DDCR) and high speed agitation desulfurized crumb rubber(HSADCR) modified bitumens were investigated by a fluorescence microscope, and the physical properties of these three modified bitumens were studied.The results show that the dynamic desulfuration can improve the swelling capacity of crumb rubber in bitumen by destroying the sulfuratized bond of the crumb rubber,but the reunion of rubber particles during dynamic desulfuration also makes the swelling and the DDCR in bitumen difficult, so properties of the DDCR modified bitumen are not superior to the general crumb rubber modified bitumen.However,high speed agitation desulfuration can not only improve the swelling capacity of crumb rubber in bitumen,but also avoid the reunion of rubber particles,so some properties of bitumen can be improved by the modification of HSADCR.展开更多
The by-product of wet flue gas desulfurization,desulfurized steel slag(DS),had chemical characteristics like natural gypsum that can be used to improve saline-sodic soil.However,contamination risk of heavy metals for ...The by-product of wet flue gas desulfurization,desulfurized steel slag(DS),had chemical characteristics like natural gypsum that can be used to improve saline-sodic soil.However,contamination risk of heavy metals for cycling utilization of DS in agriculturewas concerned mostly.Both pot and field experiments were conducted for evaluating the potential pollution risk of DS as the amendment of saline-sodic soil.Results showed that application of DS decreased the contents of Cd,Cu,Zn,and Pb,while significantly increasing chromium(Cr)content in DS-amended soils.The field experiment demonstrated that the migration of heavy metals(Cd,Zn,Cu,and Pb)in the soil profile was negligible.The application of DS at the dosage of 22.5–225 tons/ha significantly increased the Cr content in alfalfa(Medicago sativa L.)but lower than the national standard for feed in China(GB 13078-2017).DS altered the chemical fraction of heavy metals(Zn,Cu,and Pb),transferred exchangeable,reducible into oxidizable and residual forms in DS-amended soil.Application of DS combined with fulvic acid(FA)could effectively reduce the movement of heavy metals in soil and the accumulation of Cr in alfalfa.Based on our results,DS was a safe and feasible material for agricultural use and presented relatively little pollution risk of heavy metals.However,the results also showed that DS to a certain extent had a potential environmental risk of Cr if larger dosages of DS were used.展开更多
The corrosion behaviors of pure titanium and its weldment welded by tungsten inert gas (TIG) welding in simulated desulfurized flue gas condensates in thermal power plant chimney were investigated using potentiodyna...The corrosion behaviors of pure titanium and its weldment welded by tungsten inert gas (TIG) welding in simulated desulfurized flue gas condensates in thermal power plant chimney were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and immersion tests. The effects of heat input and shielding gases on the corrosion behavior of the welded titanium were also studied. Grain coarsening and Widmanst^itten structure were found in both the fusion zone and the heat-affected zone. The welded titanium exhibited active-passive behavior in the simulated condensates. Both the polarization curves and EIS measurements confirmed that TIG welding process with different parameters had few effects on the corrosion behavior. It was proved that the microstructure changes were not the key material factors affecting the corrosion behavior of pure titanium under the test conditions, while the oxide film had remarkable effect on improving the corrosion resistance.展开更多
Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic fram...Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic framework(CoNi-MOF)is fabricated to disperse N-hydroxyphthalimide(NHPI),in which the whole catalyst provides plentiful synergic catalytic effect to improve the performance of oxidative desulfurization(ODS).As a bimetallic MOF,the second metal Ni doping results in the flower-like morphology and the modification of electronic properties,which ensure the exposure of NHPI and strengthen the synergistic effect of the overall catalyst.Compared with the monometallic Co-MOF and naked NHPI,the NHPI@CoNi-MOF triggers the efficient activation of molecular oxygen and improves the ODS performance without an initiator.The sulfur removal of dibenzothiophene-based model oil reaches 96.4%over the NHPI@CoNi-MOF catalyst in 8 h of reaction.Furthermore,the catalytic product of this aerobic ODS reaction is sulfone,which is adsorbed on the catalyst surface due to the difference in polarity.This work provides new insight and strategy for the design of a strong synergic catalytic effect between NHPI and bimetallic supports toward high-activity aerobic ODS materials.展开更多
A few-layered hexagonal boron nitride nanosheets stabilized platinum nanoparticles(Pt/h-BNNS)is engineered for oxidation-promoted adsorptive desulfurization(OPADS)of fuel oil.It was found that the few-layered structur...A few-layered hexagonal boron nitride nanosheets stabilized platinum nanoparticles(Pt/h-BNNS)is engineered for oxidation-promoted adsorptive desulfurization(OPADS)of fuel oil.It was found that the few-layered structure and the defective sites of h-BNNS not only are beneficial to the stabilization of Pt NPs but also favor the adsorption of aromatic sulfides.By employing Pt/h-BNNS with a Pt loading amount of 1.19 wt%as the active adsorbent and air as an oxidant,a 98.0%sulfur removal over dibenzothiophene(DBT)is achieved along with a total conversion of the DBT to the corresponding sulfones(DBTO_(2)).Detailed experiments show that the excellent desulfurization activity originates from the few-layered structure of h-BNNS and the high catalytic activity of Pt NPs.In addition,the OPADS system with Pt/h-BNNS as the active adsorbent shows remarkable stability in desulfurization performance with the existence of different interferents such as olefin,and aromatic hydrocarbons.Besides,the Pt/h-BNNS can be recycled 12 times without a significant decrease in desulfurization performance.Also,a process flow diagram is proposed for deep desulfurization of fuel oil and recovery of high value-added products,which would promote the industrial application of such OPADS strategy.展开更多
Polyurethane/desulfurization ash(PU/DA)composites were synthesized using"one-pot method",with the incorporation of a silane coupling agent(KH550)as a"molecular bridge"to facilitate the integration ...Polyurethane/desulfurization ash(PU/DA)composites were synthesized using"one-pot method",with the incorporation of a silane coupling agent(KH550)as a"molecular bridge"to facilitate the integration of DA as hard segments into the PU molecular chain.The effects of DA content(φ)on the mechanical properties,thermal stability,and hydrophobicity of PU,both before and after the addition of KH550,were thoroughly examined.The results of microscopic mechanism analysis confirmed that KH550 chemically modified the surface of DA,facilitating its incorporation into the polyurethane molecular chain,thereby significantly enhancing the compatibility and dispersion of DA within the PU matrix.When the mass fraction of modified DA(MDA)reached 12%,the mechanical properties,thermal stability,and hydrophobicity of the composites were substantially improved,with the tensile strength reaching 14.9 MPa,and the contact angle measuring 100.6°.展开更多
An efficient mass transfer process is a critical factor for regulating catalytic activity in a photocatalytic desulfurization system.Herein,a phosphotungstic acid(HPW)active center is successfully composited with a qu...An efficient mass transfer process is a critical factor for regulating catalytic activity in a photocatalytic desulfurization system.Herein,a phosphotungstic acid(HPW)active center is successfully composited with a quaternary ammonium phosphotungstate-based hexadecyltrimethylammonium chloride ionic liquid(CTAC-HPW)by the ion exchange method for the photocatalytic oxidative desulfurization of dibenzothiophene sulfide.The keggin structure of HPW and highly mass transfer performance of organic cations synergistically enhanced the photocatalytic activity towards the effective convertion of dibenzothiophene(DBT)with the excitation of visible light.The deep desulfurization(<10 mg·kg^(-1))is attained within 30 min,and well stability is demonstrated within 25 cycles.Moreover,the CTAC-HPW photocatalyst projects well selectivity to interference from coexisting compounds such as olefins and aromatic hydrocarbons and universality of dibenzothiophenes,for example,4-methyldibenzothiophene(4-MDBT)and 4,6-dimethyldibenzothiophene(4,6-DMDBT).Ultimately,a possible photocatalytic desulfurization mechanism is proposed according to the Gaschromatography-mass spectrometry(GC-MS),proving that the final product is the corresponding sulfone.The trapping experiment and electron spin resonance(ESR)analysis confirmed that h^(+)and,COOH played critical roles in the oxidation process.The work offers a practicable strategy for efficiently converting DBT to DBTO_(2) with added value.展开更多
In order to reduce the sulfur compounds in diesel fuel,boron nitride(BN)has been used as a novel metal-free catalyst in the present research.This nanocatalyst was synthesized via template-free approach followed by hea...In order to reduce the sulfur compounds in diesel fuel,boron nitride(BN)has been used as a novel metal-free catalyst in the present research.This nanocatalyst was synthesized via template-free approach followed by heating treatment at 900℃ in nitrogen atmosphere that the characteristics of the sample were identified by the X-ray diffraction,Fourier-transform infrared spectroscopy,Raman spectroscopy,field emission scanning electron microscopy,transmission electron microscopy,atomic force microscopy,and N2 adsorption-desorption isotherms.The results of structural and morphological analysis represented that BN has been successfully synthesized.The efficacy of the main operating parameters on the process was studied by using response surface methodology based on the Box-Behnken design method.The prepared catalyst showed high efficiency in oxidative desulfurization of diesel fuel with initial sulfur content of 8040 mg·kg^(-1)S.From statistical analysis,a significant quadratic model was obtained to predict the sulfur removal as a function of efficient parameters.The maximum efficiency of 72.4%was achieved under optimized conditions at oxidant/sulfur molar ratio of 10.2,temperature of 71℃,reaction time of 113 min,and catalyst dosage of 0.36 g.Also,the reusability of the BN was studied,and the result showed little reduction in activity of the catalyst after 10 times regeneration.Moreover,a plausible mechanism was proposed for oxidation of sulfur compounds on the surface of the catalyst.The present study shows that BN materials can be selected as promising metal-free catalysts for desulfurization process.展开更多
A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80 °C to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs w...A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80 °C to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were characterized byFourier transform infrared spectrophotometry (FT-IR), thermogravimetry/differential thermogravimetry (TG/DTG), andelectron spray ionization mass spectrometry (ESI-MS). The DESs were used as both extractants and catalysts to removedibenzothiophene from fuels via oxidative desulfurization (ODS). Experiments were performed to investigated the influenceof factors such as composition of DES, temperature, oxidant dosage (molar ratio of O:S), DES dosage (volume ratio ofDES:oil), and number of cycles on desulfurization rate. The results indicated that the removal rate of dibenzothiophene (DBT)was affected by the Lewis acidic DESs, with that of H_(3)PO_(4)/0.25∙ZnCl_(2) reaching 96.4% under optimal conditions (Voil=5 mL,VDES=1 mL, an oxidant dosage of 6, T=50 ℃). After six cycles, the desulfurization rate of H_(3)PO_(4)/0.25∙ZnCl_(2) remained above94.1%. The apparent activation energy of dibenzothiophene (DBT) removal reaction was determined by a pseudo-first orderkinetic equation according to the Arrhenius equation to be 32.34 kJ/mol, as estimated. A reaction mechanism is proposedbased on the experimental data and characterization results.展开更多
In order to realize the OY Smelting Furnace disposal of solid waste,municipal waste,form a model of steel enterprises and urban integration,through the production practice of smelting furnace,analyzes the mechanism of...In order to realize the OY Smelting Furnace disposal of solid waste,municipal waste,form a model of steel enterprises and urban integration,through the production practice of smelting furnace,analyzes the mechanism of solid waste disposal,and proposed the disposal of solid waste desulfurization agent and disposal method:According to the theory to guide the actual production process,the test ton of iron with 10-15kg of desulfurizer in the production process does not affect the quality of molten iron and slag quality.展开更多
Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this...Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this issue with a double benefit.Herein,the amino-functionalized lotus root-like carbon nanofibers(NH_(2)-PLCNFs)are prepared by the amination of electrospinning carbon nanofibers under dielectric barrier discharge plasma.Selective catalytic oxidation of H_(2)S to elemental sulfur(S)is achieved over the metalfree NH_(2)-PLCNFs catalyst,and the obtained composite S@NH_(2)-PLCNFs is further used as cathode in LSBs.NH_(2)-PLCNFs enable efficient desulfurization(removal capacity as high as 3.46 g H_(2)S g^(−1) catalyst)and strongly covalent stabilization of S on modified carbon nanofibers.LSBs equipped with S@NH_(2)-PLCNFs deliver a high specific capacity of 705.8 mA h g^(−1) at 1 C after 1000 cycles based on the spatial confinement and the covalent stabilization of electroactive materials on amino-functionalized porous carbon matrix.It is revealed that S@NH_(2)-PLCNFs obtained by this kind of chemical vapor deposition leads to a more homogeneous S distribution and superior electrochemical performance to the sample S/NH_(2)-PLCNF-M prepared by the traditional molten infusion.This work opens a new avenue for the combination of environment protection and energy storage.展开更多
In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spect...In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.The results demonstrate the successful synthesis of DES.A certain amount of FeCl_(3) and CuSO_(4) was added to the DES to promote the absorption of H_(2)S;thus,a Fe(Ⅲ)-Cu(Ⅱ)coupled DES desulfurization system was obtained.The effects of DES raw materials’ratio,FeCl_(3) concentration,water content,CuSO_(4) concentration,and reaction temperature on the desulfurization efficiency and the regeneration conditions were studied.The results show that ChCl/EG DES with a molar ratio of 1:2 has a better desulfurization effect,and the addition of an appropriate amount of water can effectively promote the dissolution of CuSO_(4) and the absorption of H_(2)S.An appropriate increase in reaction temperature and CuSO_(4) concentration would also promote the absorption of H_(2)S.When the concentration of CuSO_(4) in DES desulfurizer was 0.15 mol/L,the gas speed was 20 mL/min,and the sulfur capacity could reach 10.23 g/L.The desulfurizer could be regenerated by passing O_(2),and the desulfurization efficiency did not change much after repeated use of desulfurization-regeneration many times.The desulfurization product was characterized by XRD as rhombohedral sulfur.展开更多
The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be ...The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be the most promising technology.The facile synthesis of highly efficient and stable HPW-based heterogeneous catalysts for oxidative desulfurization is still a challenging task.In this paper,pentamethylene hexamine(PEHA)and phosphotungstic acid(HPW)were combined by a simple one-step method to prepare a heterogeneous catalyst of PEHA-HPW for the production of ultra-deep desulfurization fuel oil.The composite material exhibited excellent catalytic activity and high recyclability,which could reach a 100% dibenzothiophene(DBT)removal rate in 30 min and be recycled at least 5 times.Experiments and DFT simulations were used to better examine the ODS mechanism of PEHA-HPW.It was proved that the rich amino groups on the surface of PEHA-HPW play a crucial role.This work provides a simple and feasible way for the manufacture of efficient HPW-based catalysts.展开更多
The development of intensification technology for spouted beds has become a current research focus,and an effective way to improve the efficiency of spouted beds is to reform their structure.Although numerous studies ...The development of intensification technology for spouted beds has become a current research focus,and an effective way to improve the efficiency of spouted beds is to reform their structure.Although numerous studies have been conducted on conventional beds,there are few reviews on the comprehensive application of intensification technology for spouted beds.In this paper,we comprehensively review the role of intensification technology in spouted beds for use in hydrodynamics,drying,desulfurization,pyrolysis,coating,biomass and waste gasification,and biomass drying from the perspective of experiment and simulation.Finally,potential problems and challenges in current spouted-bed research are summarized.展开更多
In the reaction process of carbonate desulfurization lead paste,the produced PbCO_(3) is easily wrapped in the outer periphery of PbSO_(4) to form a product layer,hindering the mass transfer process.Therefore,it is ne...In the reaction process of carbonate desulfurization lead paste,the produced PbCO_(3) is easily wrapped in the outer periphery of PbSO_(4) to form a product layer,hindering the mass transfer process.Therefore,it is necessary to break the PbCO_(3) product layer.In this work,the rotor stator-reinforced reactor was selected as the enhanced desulfurization reactor for the purpose of breaking the PbCO_(3) product layer and promoting mass transfer.The breakage process of the PbCO_(3) product layer generated during the PbSO_(4) desulfurization was modeled.Computational fluid dynamics simulation to the rotation conditions was carried out to theoretically analyze the fluid flow characteristics of PbSO_(4) slurry and the wall shear stress affecting the breakage of PbCO_(3) product layer.By optimizing the rotation conditions,the distribution ratio of effective rotor wall shear stress range achieved 96.1%,and the stator wall shear stress range reached 99.15%under a rotation of 2000 r·min^(-1).The research work provides a reference for analysis of the mechanism of product layer breakage in the PbSO_(4) desulfurization process,and gives a clear and intuitive systematic study on the fluid flow characteristics and wall shear stress of the desulfurization reactor.展开更多
Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performanc...Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performance.Successful encapsulation of phosphotungstic acid(HPW)and ionic liquid(BMImBr)inside the mesoporous cages of MIL-101(Cr)was accomplished through a combination of“bottle around ship”and“ship in bottle”methods.The obtained BMImPW@MIL-101(Cr)composite was characterized by XRD,FTIR,BET,SEM,XPS and ICP methods.Results indicated that the BMImPW@MIL-101(Cr)composites with PW^(3−) loading of 23.1–50.7 wt%were obtained,demonstrating that the“bottle around ship”method is beneficial to make full use of nanocages of MIL-101(Cr)to obtain expected high loading of active PW^(3−) .The BMImPW@MIL-101(Cr)exhibits excellent reusability with no evidence of leaching of active PW^(3−) and BMIm^(+),and well-preserved structure after successive cycles of regeneration and reuse.The significantly improved stability of BMImPW@MIL-101(Cr)as compared to HPW@MIL-101(Cr)is possibly because the leaching of the active PW^(3−) −sites can be greatly suppressed by forming large size of BMImPW owing to introduction of BMIm^(+)cation.The BMImPW@MIL-101(Cr)exhibited excellent catalytic activity for solvent free oxidative desulfurization of refractory sulfides.The enhanced oxidative desulfurization activity as compared to HPW@MIL-101(Cr)can be explained by the intimate contact of sulfides with active PW^(3−) sites owing the strong attraction of BMIm^(+)cation with the sulfides.展开更多
The exploration of highly efficient catalysts based on nano-sized Ti-rich titanosilicate zeolites with controllable active titanium species is of great importance in zeolite catalytic reactions.Herein,we reported an e...The exploration of highly efficient catalysts based on nano-sized Ti-rich titanosilicate zeolites with controllable active titanium species is of great importance in zeolite catalytic reactions.Herein,we reported an efficient and facile synthesis of nano-sized Ti-rich TS-1(MFI)zeolites by replacing tetrabutyl orthotitanate(TBOT)with tetrabutyl orthotitanate tetramer(TBOT-tetramer)as the titanium source.The introduced TBOT-tetramer slowed down the zeolite crystallization process,and accordingly balanced the rate of incorporating Ti and the crystal growth and inhibited the massive formation of anatase species.Notably,the prepared Ti-rich TS-1 zeolite sample had a Si/Ti as low as 27.6 in contrast to conventional one with a molar ratio of 40.The TBOT-tetramer endowed the titanosilicate zeolites with enriched active titanium species and enlarged external surface area.It also impeded the formation of anatase species,resulting in superior catalytic behavior toward the oxidative desulfurization of dibenzothiophene compared with the conventional TS-1 zeolite counterpart prepared with TBOT.展开更多
As well known in the petroleum industry and academia,Ni/ZnO catalysts have excellent desulfurization performance.However,the sulfur transfer mechanism of reactive adsorption desulfurization(RADS)that occurs on Ni/ZnO ...As well known in the petroleum industry and academia,Ni/ZnO catalysts have excellent desulfurization performance.However,the sulfur transfer mechanism of reactive adsorption desulfurization(RADS)that occurs on Ni/ZnO catalysts remains controversial.Herein,a periodic Ni nanorod supported on ZnO slab was built to represent the Ni/ZnO system,and density functional theory calculations were performed to study the sulfur transfer process and the role of H_(2)within the process.The results elucidate that the direct solid-state diffusion of S from Ni to interfacial oxygen vacancies(Ov)is more favorable than the hydrogenation of S to SH/H_(2)S on Ni and the subsequent H_(2)S desorption,and accordingly,H_(2)O is produced on Ni rather than on ZnO.Ab initio thermodynamics analysis shows that the hydrogen atmosphere applied in preparing Ni/ZnO catalysts greatly promotes the O_(v)formation on ZnO surface,which accounts for the presence of interfacial O_(v)in freshly prepared catalysts.Under RADS condition,hydrogenation of interfacial O atoms to form O-H groups facilitates the reverse spillover of these lattice O atoms from ZnO to Ni,accompanied with the interfacial O_(v)generation.In contrast to the classic S transfer mechanism via H_(2)S,the present work clearly demonstrates that the interfacial S transfer is a feasible reaction pathway in the RADS mechanism.More importantly,the existence of interfacial O_(v)is an essential prerequisite for this interfacial S diffusion,and H_(2)plays a key role in facilitating the O_(v)formation.展开更多
In the context of reactive adsorption desulfurization,the development of an efficient Ni/ZnO desulfurizer has attracted increasing attention.In the work reported here,a novel Ni/Mn-ZnO composite nanowire desulfurizer ...In the context of reactive adsorption desulfurization,the development of an efficient Ni/ZnO desulfurizer has attracted increasing attention.In the work reported here,a novel Ni/Mn-ZnO composite nanowire desulfurizer is designed on the basis of the catalytic theory of semiconductor metal oxides and the characteristics of one-dimensional nanomaterials.X-ray diffraction,scanning electron microscopy,N_(2) adsorption-desorption,and X-ray photoemission spectroscopy demonstrate that Mn doping changes the crystal structure and morphology of the Ni/ZnO desulfurizer,increases the number of quasi-free electrons in the ZnO,and promotes H_(2)S adsorption.The Ni/Mn-ZnO composite nanowire desulfurizer exhibits good desulfurization performance when used with gasoline as the raw material.展开更多
基金Funded by the Foundation of State Laboratory of Heavy Oil Processing(2002 13)
文摘Bitumen was modified with desulfurized crumb rubber (DCR) in the present of reac tive additives. The effect of the kinds and content of the reactive additive on prop erties of DCR modified bitumen (DCRMB) was investigated. The morphology of DCRMB was characterized by SEM and the changes of the chemical structure of DCRMB wit hout and with the addition of the reactive additive were analyzed by FTIR. The e xperimented results show that the softening point,the elasticity recovery and th e storage stability of DCRMB were improved significantly by the addition of the reactive additive. This is because that a network structure of rubber in DCRMB w as formed and the chemical reaction between C=C double bonds in bitumen and DCR has happened after the reactive additive was added into DCRMB.
文摘The microstructures of general crumb rubber(CR), dynamic desulfurized crumb rubber(DDCR) and high speed agitation desulfurized crumb rubber(HSADCR) modified bitumens were investigated by a fluorescence microscope, and the physical properties of these three modified bitumens were studied.The results show that the dynamic desulfuration can improve the swelling capacity of crumb rubber in bitumen by destroying the sulfuratized bond of the crumb rubber,but the reunion of rubber particles during dynamic desulfuration also makes the swelling and the DDCR in bitumen difficult, so properties of the DDCR modified bitumen are not superior to the general crumb rubber modified bitumen.However,high speed agitation desulfuration can not only improve the swelling capacity of crumb rubber in bitumen,but also avoid the reunion of rubber particles,so some properties of bitumen can be improved by the modification of HSADCR.
基金supported by the Science and Technology Innovation 2025 Major Project of Ningbo City,China(No.2018B10091)Ningbo Taiji Environmental Protection Equipment Co.,Ltd.(NTEPEC)provided experimental materials(desulfurized steel slag)。
文摘The by-product of wet flue gas desulfurization,desulfurized steel slag(DS),had chemical characteristics like natural gypsum that can be used to improve saline-sodic soil.However,contamination risk of heavy metals for cycling utilization of DS in agriculturewas concerned mostly.Both pot and field experiments were conducted for evaluating the potential pollution risk of DS as the amendment of saline-sodic soil.Results showed that application of DS decreased the contents of Cd,Cu,Zn,and Pb,while significantly increasing chromium(Cr)content in DS-amended soils.The field experiment demonstrated that the migration of heavy metals(Cd,Zn,Cu,and Pb)in the soil profile was negligible.The application of DS at the dosage of 22.5–225 tons/ha significantly increased the Cr content in alfalfa(Medicago sativa L.)but lower than the national standard for feed in China(GB 13078-2017).DS altered the chemical fraction of heavy metals(Zn,Cu,and Pb),transferred exchangeable,reducible into oxidizable and residual forms in DS-amended soil.Application of DS combined with fulvic acid(FA)could effectively reduce the movement of heavy metals in soil and the accumulation of Cr in alfalfa.Based on our results,DS was a safe and feasible material for agricultural use and presented relatively little pollution risk of heavy metals.However,the results also showed that DS to a certain extent had a potential environmental risk of Cr if larger dosages of DS were used.
基金supported by the National Natural Science Foundation of China (No.51131008)
文摘The corrosion behaviors of pure titanium and its weldment welded by tungsten inert gas (TIG) welding in simulated desulfurized flue gas condensates in thermal power plant chimney were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and immersion tests. The effects of heat input and shielding gases on the corrosion behavior of the welded titanium were also studied. Grain coarsening and Widmanst^itten structure were found in both the fusion zone and the heat-affected zone. The welded titanium exhibited active-passive behavior in the simulated condensates. Both the polarization curves and EIS measurements confirmed that TIG welding process with different parameters had few effects on the corrosion behavior. It was proved that the microstructure changes were not the key material factors affecting the corrosion behavior of pure titanium under the test conditions, while the oxide film had remarkable effect on improving the corrosion resistance.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.21978119,22202088)Key Research and Development Plan of Hainan Province(ZDYF2022SHFZ285)Jiangsu Funding Program for Excellent Postdoctoral Talent(2022ZB636)。
文摘Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic framework(CoNi-MOF)is fabricated to disperse N-hydroxyphthalimide(NHPI),in which the whole catalyst provides plentiful synergic catalytic effect to improve the performance of oxidative desulfurization(ODS).As a bimetallic MOF,the second metal Ni doping results in the flower-like morphology and the modification of electronic properties,which ensure the exposure of NHPI and strengthen the synergistic effect of the overall catalyst.Compared with the monometallic Co-MOF and naked NHPI,the NHPI@CoNi-MOF triggers the efficient activation of molecular oxygen and improves the ODS performance without an initiator.The sulfur removal of dibenzothiophene-based model oil reaches 96.4%over the NHPI@CoNi-MOF catalyst in 8 h of reaction.Furthermore,the catalytic product of this aerobic ODS reaction is sulfone,which is adsorbed on the catalyst surface due to the difference in polarity.This work provides new insight and strategy for the design of a strong synergic catalytic effect between NHPI and bimetallic supports toward high-activity aerobic ODS materials.
基金financial support from the National Natural Science Foundation of China(22178154,22008094,21908082,21878133)Natural Science Foundation of Jiangsu Province(BK20190852,BK20190854)Natural Science Foundation for Jiangsu Colleges and Universities(19KJB530005).
文摘A few-layered hexagonal boron nitride nanosheets stabilized platinum nanoparticles(Pt/h-BNNS)is engineered for oxidation-promoted adsorptive desulfurization(OPADS)of fuel oil.It was found that the few-layered structure and the defective sites of h-BNNS not only are beneficial to the stabilization of Pt NPs but also favor the adsorption of aromatic sulfides.By employing Pt/h-BNNS with a Pt loading amount of 1.19 wt%as the active adsorbent and air as an oxidant,a 98.0%sulfur removal over dibenzothiophene(DBT)is achieved along with a total conversion of the DBT to the corresponding sulfones(DBTO_(2)).Detailed experiments show that the excellent desulfurization activity originates from the few-layered structure of h-BNNS and the high catalytic activity of Pt NPs.In addition,the OPADS system with Pt/h-BNNS as the active adsorbent shows remarkable stability in desulfurization performance with the existence of different interferents such as olefin,and aromatic hydrocarbons.Besides,the Pt/h-BNNS can be recycled 12 times without a significant decrease in desulfurization performance.Also,a process flow diagram is proposed for deep desulfurization of fuel oil and recovery of high value-added products,which would promote the industrial application of such OPADS strategy.
基金Funded by the National Key Research and Development Project(No.2019YFC1908204)the Guiding Projects in Fujian Province(No.2023H0023)the Fuzhou Science and Technology Plan Project(No.2022-P-012)。
文摘Polyurethane/desulfurization ash(PU/DA)composites were synthesized using"one-pot method",with the incorporation of a silane coupling agent(KH550)as a"molecular bridge"to facilitate the integration of DA as hard segments into the PU molecular chain.The effects of DA content(φ)on the mechanical properties,thermal stability,and hydrophobicity of PU,both before and after the addition of KH550,were thoroughly examined.The results of microscopic mechanism analysis confirmed that KH550 chemically modified the surface of DA,facilitating its incorporation into the polyurethane molecular chain,thereby significantly enhancing the compatibility and dispersion of DA within the PU matrix.When the mass fraction of modified DA(MDA)reached 12%,the mechanical properties,thermal stability,and hydrophobicity of the composites were substantially improved,with the tensile strength reaching 14.9 MPa,and the contact angle measuring 100.6°.
基金the financial supports from National Natural Science Foundation of China(22172066,22378176)supported by State Key Laboratory of Heavy Oil ProcessingSupported by Jiangsu Collaborative Innovation Center of Technology and Material of Water Treatment,Suzhou University of Science and Technology。
文摘An efficient mass transfer process is a critical factor for regulating catalytic activity in a photocatalytic desulfurization system.Herein,a phosphotungstic acid(HPW)active center is successfully composited with a quaternary ammonium phosphotungstate-based hexadecyltrimethylammonium chloride ionic liquid(CTAC-HPW)by the ion exchange method for the photocatalytic oxidative desulfurization of dibenzothiophene sulfide.The keggin structure of HPW and highly mass transfer performance of organic cations synergistically enhanced the photocatalytic activity towards the effective convertion of dibenzothiophene(DBT)with the excitation of visible light.The deep desulfurization(<10 mg·kg^(-1))is attained within 30 min,and well stability is demonstrated within 25 cycles.Moreover,the CTAC-HPW photocatalyst projects well selectivity to interference from coexisting compounds such as olefins and aromatic hydrocarbons and universality of dibenzothiophenes,for example,4-methyldibenzothiophene(4-MDBT)and 4,6-dimethyldibenzothiophene(4,6-DMDBT).Ultimately,a possible photocatalytic desulfurization mechanism is proposed according to the Gaschromatography-mass spectrometry(GC-MS),proving that the final product is the corresponding sulfone.The trapping experiment and electron spin resonance(ESR)analysis confirmed that h^(+)and,COOH played critical roles in the oxidation process.The work offers a practicable strategy for efficiently converting DBT to DBTO_(2) with added value.
文摘In order to reduce the sulfur compounds in diesel fuel,boron nitride(BN)has been used as a novel metal-free catalyst in the present research.This nanocatalyst was synthesized via template-free approach followed by heating treatment at 900℃ in nitrogen atmosphere that the characteristics of the sample were identified by the X-ray diffraction,Fourier-transform infrared spectroscopy,Raman spectroscopy,field emission scanning electron microscopy,transmission electron microscopy,atomic force microscopy,and N2 adsorption-desorption isotherms.The results of structural and morphological analysis represented that BN has been successfully synthesized.The efficacy of the main operating parameters on the process was studied by using response surface methodology based on the Box-Behnken design method.The prepared catalyst showed high efficiency in oxidative desulfurization of diesel fuel with initial sulfur content of 8040 mg·kg^(-1)S.From statistical analysis,a significant quadratic model was obtained to predict the sulfur removal as a function of efficient parameters.The maximum efficiency of 72.4%was achieved under optimized conditions at oxidant/sulfur molar ratio of 10.2,temperature of 71℃,reaction time of 113 min,and catalyst dosage of 0.36 g.Also,the reusability of the BN was studied,and the result showed little reduction in activity of the catalyst after 10 times regeneration.Moreover,a plausible mechanism was proposed for oxidation of sulfur compounds on the surface of the catalyst.The present study shows that BN materials can be selected as promising metal-free catalysts for desulfurization process.
基金the College Student Innovation and Entrepreneurship Training Program Project of Liaoning Province(202310148016)Doctoral Fund of Liaoning Province(201501105).
文摘A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80 °C to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were characterized byFourier transform infrared spectrophotometry (FT-IR), thermogravimetry/differential thermogravimetry (TG/DTG), andelectron spray ionization mass spectrometry (ESI-MS). The DESs were used as both extractants and catalysts to removedibenzothiophene from fuels via oxidative desulfurization (ODS). Experiments were performed to investigated the influenceof factors such as composition of DES, temperature, oxidant dosage (molar ratio of O:S), DES dosage (volume ratio ofDES:oil), and number of cycles on desulfurization rate. The results indicated that the removal rate of dibenzothiophene (DBT)was affected by the Lewis acidic DESs, with that of H_(3)PO_(4)/0.25∙ZnCl_(2) reaching 96.4% under optimal conditions (Voil=5 mL,VDES=1 mL, an oxidant dosage of 6, T=50 ℃). After six cycles, the desulfurization rate of H_(3)PO_(4)/0.25∙ZnCl_(2) remained above94.1%. The apparent activation energy of dibenzothiophene (DBT) removal reaction was determined by a pseudo-first orderkinetic equation according to the Arrhenius equation to be 32.34 kJ/mol, as estimated. A reaction mechanism is proposedbased on the experimental data and characterization results.
文摘In order to realize the OY Smelting Furnace disposal of solid waste,municipal waste,form a model of steel enterprises and urban integration,through the production practice of smelting furnace,analyzes the mechanism of solid waste disposal,and proposed the disposal of solid waste desulfurization agent and disposal method:According to the theory to guide the actual production process,the test ton of iron with 10-15kg of desulfurizer in the production process does not affect the quality of molten iron and slag quality.
基金financial support from projects funded by the National Natural Science Foundation of China(22179017,52172038).
文摘Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this issue with a double benefit.Herein,the amino-functionalized lotus root-like carbon nanofibers(NH_(2)-PLCNFs)are prepared by the amination of electrospinning carbon nanofibers under dielectric barrier discharge plasma.Selective catalytic oxidation of H_(2)S to elemental sulfur(S)is achieved over the metalfree NH_(2)-PLCNFs catalyst,and the obtained composite S@NH_(2)-PLCNFs is further used as cathode in LSBs.NH_(2)-PLCNFs enable efficient desulfurization(removal capacity as high as 3.46 g H_(2)S g^(−1) catalyst)and strongly covalent stabilization of S on modified carbon nanofibers.LSBs equipped with S@NH_(2)-PLCNFs deliver a high specific capacity of 705.8 mA h g^(−1) at 1 C after 1000 cycles based on the spatial confinement and the covalent stabilization of electroactive materials on amino-functionalized porous carbon matrix.It is revealed that S@NH_(2)-PLCNFs obtained by this kind of chemical vapor deposition leads to a more homogeneous S distribution and superior electrochemical performance to the sample S/NH_(2)-PLCNF-M prepared by the traditional molten infusion.This work opens a new avenue for the combination of environment protection and energy storage.
基金China National Science and Technology Major Project(2016ZX05017)Sinopec Group Corporation 2020 Science and Technology Project“Organic Sulfur Catalytic Hydrolysis Technology Improves Quality Research”(No.120049-1).
文摘In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.The results demonstrate the successful synthesis of DES.A certain amount of FeCl_(3) and CuSO_(4) was added to the DES to promote the absorption of H_(2)S;thus,a Fe(Ⅲ)-Cu(Ⅱ)coupled DES desulfurization system was obtained.The effects of DES raw materials’ratio,FeCl_(3) concentration,water content,CuSO_(4) concentration,and reaction temperature on the desulfurization efficiency and the regeneration conditions were studied.The results show that ChCl/EG DES with a molar ratio of 1:2 has a better desulfurization effect,and the addition of an appropriate amount of water can effectively promote the dissolution of CuSO_(4) and the absorption of H_(2)S.An appropriate increase in reaction temperature and CuSO_(4) concentration would also promote the absorption of H_(2)S.When the concentration of CuSO_(4) in DES desulfurizer was 0.15 mol/L,the gas speed was 20 mL/min,and the sulfur capacity could reach 10.23 g/L.The desulfurizer could be regenerated by passing O_(2),and the desulfurization efficiency did not change much after repeated use of desulfurization-regeneration many times.The desulfurization product was characterized by XRD as rhombohedral sulfur.
基金supported by the National Natural Science Foundation of China(22378065,22278077)the Fujian Province Department of Science&Technology,China(2019YZ017001)。
文摘The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be the most promising technology.The facile synthesis of highly efficient and stable HPW-based heterogeneous catalysts for oxidative desulfurization is still a challenging task.In this paper,pentamethylene hexamine(PEHA)and phosphotungstic acid(HPW)were combined by a simple one-step method to prepare a heterogeneous catalyst of PEHA-HPW for the production of ultra-deep desulfurization fuel oil.The composite material exhibited excellent catalytic activity and high recyclability,which could reach a 100% dibenzothiophene(DBT)removal rate in 30 min and be recycled at least 5 times.Experiments and DFT simulations were used to better examine the ODS mechanism of PEHA-HPW.It was proved that the rich amino groups on the surface of PEHA-HPW play a crucial role.This work provides a simple and feasible way for the manufacture of efficient HPW-based catalysts.
基金supported by the National Natural Science Foundation of China(22178286)Shaanxi Qin Chuangyuan“scientist and engineer”team construction project(2022KXJ-041).
文摘The development of intensification technology for spouted beds has become a current research focus,and an effective way to improve the efficiency of spouted beds is to reform their structure.Although numerous studies have been conducted on conventional beds,there are few reviews on the comprehensive application of intensification technology for spouted beds.In this paper,we comprehensively review the role of intensification technology in spouted beds for use in hydrodynamics,drying,desulfurization,pyrolysis,coating,biomass and waste gasification,and biomass drying from the perspective of experiment and simulation.Finally,potential problems and challenges in current spouted-bed research are summarized.
基金financially supported by the National Key Research and Development Program of China (2018YFC1903603)。
文摘In the reaction process of carbonate desulfurization lead paste,the produced PbCO_(3) is easily wrapped in the outer periphery of PbSO_(4) to form a product layer,hindering the mass transfer process.Therefore,it is necessary to break the PbCO_(3) product layer.In this work,the rotor stator-reinforced reactor was selected as the enhanced desulfurization reactor for the purpose of breaking the PbCO_(3) product layer and promoting mass transfer.The breakage process of the PbCO_(3) product layer generated during the PbSO_(4) desulfurization was modeled.Computational fluid dynamics simulation to the rotation conditions was carried out to theoretically analyze the fluid flow characteristics of PbSO_(4) slurry and the wall shear stress affecting the breakage of PbCO_(3) product layer.By optimizing the rotation conditions,the distribution ratio of effective rotor wall shear stress range achieved 96.1%,and the stator wall shear stress range reached 99.15%under a rotation of 2000 r·min^(-1).The research work provides a reference for analysis of the mechanism of product layer breakage in the PbSO_(4) desulfurization process,and gives a clear and intuitive systematic study on the fluid flow characteristics and wall shear stress of the desulfurization reactor.
文摘Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performance.Successful encapsulation of phosphotungstic acid(HPW)and ionic liquid(BMImBr)inside the mesoporous cages of MIL-101(Cr)was accomplished through a combination of“bottle around ship”and“ship in bottle”methods.The obtained BMImPW@MIL-101(Cr)composite was characterized by XRD,FTIR,BET,SEM,XPS and ICP methods.Results indicated that the BMImPW@MIL-101(Cr)composites with PW^(3−) loading of 23.1–50.7 wt%were obtained,demonstrating that the“bottle around ship”method is beneficial to make full use of nanocages of MIL-101(Cr)to obtain expected high loading of active PW^(3−) .The BMImPW@MIL-101(Cr)exhibits excellent reusability with no evidence of leaching of active PW^(3−) and BMIm^(+),and well-preserved structure after successive cycles of regeneration and reuse.The significantly improved stability of BMImPW@MIL-101(Cr)as compared to HPW@MIL-101(Cr)is possibly because the leaching of the active PW^(3−) −sites can be greatly suppressed by forming large size of BMImPW owing to introduction of BMIm^(+)cation.The BMImPW@MIL-101(Cr)exhibited excellent catalytic activity for solvent free oxidative desulfurization of refractory sulfides.The enhanced oxidative desulfurization activity as compared to HPW@MIL-101(Cr)can be explained by the intimate contact of sulfides with active PW^(3−) sites owing the strong attraction of BMIm^(+)cation with the sulfides.
基金the National Natural Science Foundation of China, China (Grant 21920102005, 22288101, and 21835002)the 111 Project, China (B17020)+2 种基金the European Union through the European Research Council, European Union (grant ERC-AdG-2014-671093, SynCatMatch)the Spanish Government through “Severo Ochoa”, Spain (SEV2016-0683, MINECO) for supporting this workthe financial support from China Scholarship Council, China
文摘The exploration of highly efficient catalysts based on nano-sized Ti-rich titanosilicate zeolites with controllable active titanium species is of great importance in zeolite catalytic reactions.Herein,we reported an efficient and facile synthesis of nano-sized Ti-rich TS-1(MFI)zeolites by replacing tetrabutyl orthotitanate(TBOT)with tetrabutyl orthotitanate tetramer(TBOT-tetramer)as the titanium source.The introduced TBOT-tetramer slowed down the zeolite crystallization process,and accordingly balanced the rate of incorporating Ti and the crystal growth and inhibited the massive formation of anatase species.Notably,the prepared Ti-rich TS-1 zeolite sample had a Si/Ti as low as 27.6 in contrast to conventional one with a molar ratio of 40.The TBOT-tetramer endowed the titanosilicate zeolites with enriched active titanium species and enlarged external surface area.It also impeded the formation of anatase species,resulting in superior catalytic behavior toward the oxidative desulfurization of dibenzothiophene compared with the conventional TS-1 zeolite counterpart prepared with TBOT.
基金supported by the National Natural Science Foundation of China(22178388,21776315)the Taishan Scholars Program of Shandong Province(tsqn201909065)the Fundamental Research Funds for the Central Universities(19CX05001A).
文摘As well known in the petroleum industry and academia,Ni/ZnO catalysts have excellent desulfurization performance.However,the sulfur transfer mechanism of reactive adsorption desulfurization(RADS)that occurs on Ni/ZnO catalysts remains controversial.Herein,a periodic Ni nanorod supported on ZnO slab was built to represent the Ni/ZnO system,and density functional theory calculations were performed to study the sulfur transfer process and the role of H_(2)within the process.The results elucidate that the direct solid-state diffusion of S from Ni to interfacial oxygen vacancies(Ov)is more favorable than the hydrogenation of S to SH/H_(2)S on Ni and the subsequent H_(2)S desorption,and accordingly,H_(2)O is produced on Ni rather than on ZnO.Ab initio thermodynamics analysis shows that the hydrogen atmosphere applied in preparing Ni/ZnO catalysts greatly promotes the O_(v)formation on ZnO surface,which accounts for the presence of interfacial O_(v)in freshly prepared catalysts.Under RADS condition,hydrogenation of interfacial O atoms to form O-H groups facilitates the reverse spillover of these lattice O atoms from ZnO to Ni,accompanied with the interfacial O_(v)generation.In contrast to the classic S transfer mechanism via H_(2)S,the present work clearly demonstrates that the interfacial S transfer is a feasible reaction pathway in the RADS mechanism.More importantly,the existence of interfacial O_(v)is an essential prerequisite for this interfacial S diffusion,and H_(2)plays a key role in facilitating the O_(v)formation.
基金support from Project No. L2020013/L2020014 of the Liaoning Province Department of Educationsupported by the Talent Scientific Research Fund of LSHU (No.2021XJJL-020)
文摘In the context of reactive adsorption desulfurization,the development of an efficient Ni/ZnO desulfurizer has attracted increasing attention.In the work reported here,a novel Ni/Mn-ZnO composite nanowire desulfurizer is designed on the basis of the catalytic theory of semiconductor metal oxides and the characteristics of one-dimensional nanomaterials.X-ray diffraction,scanning electron microscopy,N_(2) adsorption-desorption,and X-ray photoemission spectroscopy demonstrate that Mn doping changes the crystal structure and morphology of the Ni/ZnO desulfurizer,increases the number of quasi-free electrons in the ZnO,and promotes H_(2)S adsorption.The Ni/Mn-ZnO composite nanowire desulfurizer exhibits good desulfurization performance when used with gasoline as the raw material.