Enhanced dealkalization of bauxite residue through calcium-activated desulfurization gypsum

A novel integrated approach to remove the free alkalis and stabilize solid-phase alkalinity by controlling the release of Ca from desulfurization gypsum was developed.The combination of recycled FeCl_(3)solution and EDTA activated desulfurization gypsum lowered the bauxite residue pH to 7.20.Moreover,it also improved the residual Ca state,with its contribution to the total exchangeable cations increased(68%-92%).Notably,the slow release of exchangeable Ca introduced through modified desulfurization gypsum induced a phase transition of the alkaline minerals.This treatment stabilized the dealkalization effect of bauxite residue via reducing its overall acid neutralization capacity in abating pH rebound.Hence,this approach can provide guidance for effectively utilizing desulfurization gypsum to achieve stable regulation of alkalinity in bauxite residue.

Effect of integration of mechanical ball milling and flue gas desulfurization gypsum on dealkalization of bauxite residue

The synergistic impact of mechanical ball milling and flue gas desulfurization(FGD)gypsum on the dealkalization of bauxite residue was investigated through integrated analyses of solution chemistry,mineralogy,and microtopography.The results showed a significant decrease in Na_(2)O content(>30 wt.%)of FGD gypsum-treated bauxite residue after 30 min of mechanical ball milling.Mechanical ball milling resulted in differentiation of the elemental distribution,modification of the minerals in crystalline structure,and promotion in the dissolution of alkaline minerals,thus enhancing the acid neutralization capacity of bauxite residue.5 wt.%FGD gypsum combined with 30 min mechanical ball milling was optimal for the dealkalization of bauxite residue.

Fluoride Ion Adsorption Effect and Adsorption Mechanism of Self-Supported Adsorbent Materials Based on Desulfurization Gypsum-Aluminate Cement

The adsorption method has the advantages of low cost,high efficiency,and environmental friendliness in treating fluorinated wastewater,and the adsorbent material is the key.This study combines the inherent anion-exchange adsorption properties of layered double hydroxides(LDHs).Self-supported porous adsorbent materials loaded with AFm and AFt were prepared from a composite cementitious system consisting of calcium aluminate cement(CAC)and flue gas desulfurization gypsum(FGDG)by chemical foaming technique.The mineral composition of the adsorbent material was characterized by X-ray diffraction(XRD)and Scanning electron microscopy(SEM).Through the static adsorption experiment,the adsorption effect of the mineral composition of the adsorbent on fluoride ions was deeply analyzed,and the adsorption mechanism was revealed.XRD and SEM showed that the main hydration phases of the composite cementitious system consisting of CAC and FGDG are AFm,AFt,AH_(3),and CaSO_(4)·2H_(2)O.FGDG accelerates the hydration process of CAC and inhibits the transformation of AFt to AFm.The AFt content increased,and the AFm content decreased or even disappeared as the amount of FGDG increased.Static adsorption experiment results showed that AFm and AFt in adsorbent materials could significantly enhance the adsorption of fluoride ions.The adsorption of F^(−)in aqueous solution by PAG tends more towards monolayer adsorption with a theoretical maximum capacity of 108.70 mg/g and is similar to the measured value of 112.77 mg/g.

Transformation of Flue-Gas-Desulfurization Gypsum to α-Hemihydrated Gypsum in Salt Solution at Atmospheric Pressure

Direct phase transformation of flue gas desulfurization gypsum in hot salt solution at atmospheric pres-sure was investigated.The effects of temperature,salt species,salt concentration,solids content,pH and modifier were examined.The crystals obtained under different conditions and solubility of calcium sulfate in contact with solid gypsum were also determined.α-Calcium sulfate hemihydrate crystals of stubby columnar shape and regular pentahedral sides were obtained under the following conditions：salt concentration 20%-30%,operation tempera-ture 95-100 °C,solids mass content in the slurry 10%-30% and neutral pH.Thermodynamic analysis revealed that phase transformation of calcium sulfate dihydrate to α-calcium sulfate hemihydrate occurs because of the difference in solubilities between the two solid gypsum phases in this system.

Calcium sulfate whisker prepared by flue gas desulfurization gypsum:A physical–chemical coupling production process

In this paper,the solid waste desulfurization gypsum produced by coal-fired power plants was used as a raw material to prepare calcium sulfate whiskers with high application prospects.Calcium sulfate whiskers with uniform morphology and high aspect ratio can be prepared by hydrothermal method in sulfuric acid solution.A new process of desulfurization gypsum activated by high-energy grinding to reduce the reaction temperature and sulfuric acid concentration was developed.Through the comparison of product morphology,the best grinding time was determined to be 3.5 h.The mechanism of desulfurization gypsum through physical–chemical coupling to reduce energy consumption was clarified.The activation of desulfurization gypsum by grinding and the acidic environment provided by the sulfuric acid solution made the calcium sulfate solution reached rapid saturation and accelerated the nucleation rate.By calculating the conversion and crystallization rate of calcium sulfate whiskers,it was found that there were obvious"autocatalytic"kinetic characteristics during the crystallization process.

Promotion of conversion activity of flue gas desulfurization gypsum into α-hemihydrate gypsum by calcination-hydration treatment

The massive accumulation of flue gas desulfurization(FGD)gypsum produced in the wet limestone-gypsum flue gas desulfurization process not only encroaches on lands but also causes serious environmental pollution.The preparation ofα-hemihydrate gypsum(α-HH)is an important way to achieve high-value utilization of FGD gypsum.Although the glycerol-water solution approach can be used to produceα-HH from FGD gypsum under mild conditions,the transition is kinetically unfavorable in the mixed solution.Here,an easy pretreatment was used to activate FGD gypsum by calcination and hydration to readily complete the transition.The pretreatment deteriorated the crystallinity of FGD gypsum and caused it to form small irregular flaky crystals,which dramatically increased the specific surface area.Additionally,most of the organics adsorbed onto FGD gypsum surfaces were removed after pretreatment.The poor crystallinity,increased specific surface area,and elimination of organics adsorbed onto crystal surfaces effectively improved the conversion activity of FGD gypsum,thereby promoting dihydrate gypsum(DH)dissolution andα-HH nucleation.Overall,the phase transition of FGD gypsum toα-HH is facilitated.

Influence of Thermally Treated Flue Gas Desulfurization(FGD) Gypsum on Performance of the Slag Powder Concrete

The feasibility of flue gas desulphurization （FGD） as concrete admixture was studied. A combined concrete admixture of the thermally-treated FGD gypsum and slag powder was explored. The FGD gypsum was roasted at 200℃ for 60 min and then mixed with the slag powder to form FGD gypsum-slag powder combined admixture in which the SO3 content was 3.5wt%. Cement was partially and equivalently replaced by slag powder alone or FGD gypsum-slag powder, at concentration of 25wt%, 40wt%, and 50wt%, respectively. The setting times, hydration products, total porosity and pore size distributions of the paste were determined. The compressive strength and drying shrinkage of cement mortar and concrete were also tested. The experimental results show that, in the presence of FGD gypsum, the setting times are much slower than those of pastes in the absence of FGD gypsum. The combination of FGD gypsum and slag powder provides synergistic benefits above that of slag powder alone. The addition of FGD gypsum provides benefit by promoting ettringite formation and forms a compact microstructure, increasing the compressive strength and reduces the drying shrinkage of cement mortar and concrete.

Influence of crystal-transforming agent on the performance and mechanism ofα-high-strength gypsum prepared from FGD gypsum

This paper investigates the impact of flue gas desulfurization(FGD)gypsum's crystal modifier on the characteristics and microcosmic mechanism ofα-high strength gypsum.The results demonstrate that all three crystal modifiers can convert FGD gypsum toα-high-strength gypsum.Citric acid(CA)has the most significant influence onα-high-strength gypsum,and the preparedα-high-strength gypsum is short columnar,with an aspect ratio in the range of 1-3,and has a faster setting time,a larger specific surface area,and a smaller standard consistency,higher compressive strength,greater surface hardness,and smaller crystal particle size.The initial setting time of theα-high-strength gypsum manufactured with CA crystal modifier was decreased by 36%compared to the blank sample,the final setting time was lowered by 37.5%,and the water consumption of the standard consistency was reduced by 8%.The maximum strength is 32 MPa after 2 h,the absolute dry compressive strength is up to 38 MPa,and the surface hardness is improved by 24.43%.

Evaluation of flue gas desulfurization gypsum as a low-cost precipitant for phosphorus removal from anaerobic digestion effluent filtrate

Land application of anaerobic digestion(AD)effluent as a fertilizer is desirable for nutrient recycling,but often supplies excess phosphorus(P),which contributes to surface water eutrophication.Reducing the P content in AD effluent filtrate using calcium(Ca)treatment prior to land application is a potential strategy for improving effluent disposal and meeting the discharge standard.This study took flue gas desulphurization(FGD)gypsum,a by-product of coal-fired power plants,as a low-cost Ca source,and combined with traditional phosphorus removal agents to achieve high phosphorus removal efficiency with less chemical cost.As the results showed,FGD gypsum dosages of 20 mmol/L Ca(3.44 g/L)and 40 mmol/L Ca(6.89 g/L)removed up to 97.1%of soluble P(initially 102.8 mg/L)within 60-90 minutes.Combining FGD gypsum treatment with traditional chemical treatments using calcium hydroxide[Ca(OH)2]or ferric chloride(FeCl3)could achieve>99%P removal with reduced chemical costs.This study demonstrated that FGD gypsum is an efficient calcium-based precipitant for phosphorus removal,offering a cost-effective and sustainable approach to enhance wastewater treatment practices and meet discharge standards in wastewater management.

Effects of flue gas desulfurization gypsum and clover planting on qualities of soil and winter jujube in coastal saline-alkali orchard of north China

Flue gas desulfurization gypsum and clover planting alleviated the soil salinization stress.Soil pH and total phosphorus affected the bacterial communi-ties.Total phosphorus affected the fungal communities.Flue gas desulfurization gypsum and clover planting improved jujube quality.The coastal area of Shandong Province,characterized by coastal saline tidal soil,is one of the main production areas of winter jujube in China.However,the low soil fertility and poor soil structure in jujube orchard restricted the development of the jujube industry.The objectives of this study were to 1)evaluate the effect of application of flue gas desulfurization(FGD)gypsum and clover planting on soil quality improvement and soil microbial community structure of jujube orchard;2)investigate the effects of two measures on the nutrition and quality of winter jujube.The results showed that FGD gypsum reduced the soil total salt content by 65.6%,and clover planting increased the soil organic matter content by 30.7%,which effectively alleviated the soil salinization stress and improved the soil structure.Soil pH and total phosphorus(TP)were the main determinants influencing bacterial community composition,and TP was the dominant factor of the fungal community composition in the saline-alkali soils.Meanwhile,FGD gypsum addition and clover planting significantly increased the sugar degree and Vc content of winter jujube,thus improved jujube quality,and further contributed to the ecological sustainable development of winter jujube industry.

Use of flue gas desulfurization gypsum to reduce dissolved phosphorus in runoff and leachate from two agricultural soils

Controlling dissolved phosphorus(DP)loss from high P soil to avoid water eutrophication is a worldwide high priority.A greenhouse study was conducted in which flue gas desulfurization gypsum(FGDG)was applied by using different application methods and rates to two agricultural soils.Phosphorus fertilizer was incorporated into the soils at 2.95 g kg^(-1)to simulate soil with high P levels.The FGDG was then applied at amounts of 0,1.5,and 15 g kg^(-1)soil on either the soil surface or mixed throughout the soil samples to simulate no-tillage and tillage,respectively.Ryegrass was planted after treatment application.The study showed that FGDG reduced runoff DP loss by 33%and leachate DP loss 38%in silt loam soil,and runoff DP loss 46%and leachate DP loss 14%in clay loam soil,at the treatment of 15 g kg^(-1)FGDG.Mixing applied method(tillage)provided strong interaction with higher FGDG.To overall effect,the mixing-applied method performed better in controlling DP loss from silt loam soil,while surface-applied(no tillage)showed its advantage in controlling DP loss from clay loam soil.In practice it is necessary to optimize FGDG concentrations,application methods,and DP sources(runoff or leachate)to get maximized benefits of FGDG application.The FGDG application had no negative effects on the soil and ryegrass.

Investigation on the relationship between the fine particle emission and crystallization characteristics of gypsum during wet flue gas desulfurization process

The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed.The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry,the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller,indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower p H value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition,the higher concentrations of the Fe3＋ions and the F- ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe3＋ ions was more obvious.With the application of the desulfurization synergist additive,it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.

Preparation of calcium ferrite by flue gas desulfurization gypsum

At present,the continuous accumulation of the flue gas desulfurization(FGD)gypsum in steel plants leads to the serious environmental issues and resource waste.To achieve green and sustainable development for the steel industry,it is significant to improve the usage of by-product gypsum.Employing the sintering FGD gypsum,ferric oxide,and graphite carbon as raw materials,the effects of the carbon content,reaction time,and molar ratio of CaO to Fe_(2)O_(3)on the desulfurization rate of gypsum were studied based on the orthogonal experiment.The results show that the order of the three influencing factors on the desulfurization rate of FGD gypsum is:molar ratio of CaO to Fe_(2)O_(3)>reaction time>carbon content.Under the optimal conditions of 20 wt.%carbon content,4 h reaction time,and 1:1 molar ratio of CaO to Fe_(2)O_(3),the desulfurization rate of desulfurization gypsum is 95.79%,and 97.57 wt.%of calcium ferrite appears in the solid product,which can be used as sintering additive to increase the economic benefits of enterprises and realize the green ecological development mode of internal generation and internal digestion of solid waste in iron and steel enterprises.