Using regional geological, newly acquired 2D and 3D seismic, drilling and well log data, especially 2D long cable seismic profiles, the structure and stratigraphy in the deep-water area of Qiongdongnan Basin are inter...Using regional geological, newly acquired 2D and 3D seismic, drilling and well log data, especially 2D long cable seismic profiles, the structure and stratigraphy in the deep-water area of Qiongdongnan Basin are interpreted. The geometry of No.2 fault system is also re-defined, which is an important fault in the central depression belt of the deep-water area in the Qiongdongnan Basin by employing the quantitative analysis techniques of fault activity and backstripping. Furthermore, the dynamical evolution of the No.2 fault sys-tem and its controls on the central depression belt are analyzed. This study indicates that the Qiongdongnan Basin was strongly influenced by the NW-trending tensile stress field during the Late Eocene. At this time, No.2 fault system initiated and was characterized by several discontinuous fault segments, which controlled a series small NE-trending fault basins. During the Oligocene, the regional extensional stress field changed from NW-SE to SN with the oceanic spreading of South China Sea, the early small faults started to grow along their strikes, eventually connected and merged as the listric shape of the No.2 fault system as ob-served today. No.2 fault detaches along the crustal Moho surface in the deep domain of the seismic profiles as a large-scale detachment fault. A large-scale rollover anticline formed in hanging wall of the detachment fault. There are a series of small fault basins in both limbs of the rollover anticline, showing that the early small basins were involved into fold deformation of the rollover anticline. Structurally, from west to east, the central depression belt is characterized by alternatively arranged graben and half-graben. The central depression belt of the Qiongdongnan Basin lies at the extension zone of the tip of the V-shaped northwest-ern ocean sub-basin of the South China Sea, its activity period is the same as the development period of the northwestern ocean sub-basin, furthermore the emplacement and eruption of magma that originated from the mantle below the Moho surface occurred at the region between Songnan-Baodao and Changchang sags, from east to west with the early-stage spreading of the South China Sea. Therefore, this study not only helps in depicting the structural features and evolution of the deep-water basin in the Qiongdongnan Basin, but also provides the geological and structural evidence for establishing a unified model of continental margin extension and oceanic spreading.展开更多
Large-scale detachment faults on mid-ocean ridges (MORs) provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively hi...Large-scale detachment faults on mid-ocean ridges (MORs) provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively high residual Bouguer gravity anomaly and P-wave velocity, and are commonly associated with ocean- ic core complex. According to 30 detachment faults identified on MORs, we found that their distances to the axis mostly range from 5 to 50 km, half-spreading rates range from 6.8 to 17 mm/a, and activity time ranges from recent to 3 Ma. Most of the detachment faults are developed on the slow spreading Mid-Atlantic Ridge (MAR) and ultra-slow spreading Southwest Indian Ridge (SWIRl, with the dominant half-spreading rates of 7-13 mm/a, especially 10-13 mm/a. Furthermore, they mostly occur at the inside corner of one segment end and result in an asymmetric seafloor spreading. The detachment faults on MORs are mainly controlled by the tectonism and influenced by the magmatism. Long-lived detachment faults tend to be formed where the ridge magma supply is at a moderate level, although the tectonism is a first-order controlling factor. At the slow spreading ridges, detachment faults tend to occur where local magma supply is relatively low, whilst at the ultra-slow spreading ridges, they normally occur where local magma supply is relatively high. These faults are accompanied by hydrothermal activities, with their relationships being useful in the study of hydrothermal polymetallic sulfides and their origin.展开更多
Based on the new seismic and drilling data and the recent related research results,this paper systematically analyzes the diversity and complexity of evolution process of crustal lithosphere structure and basin struct...Based on the new seismic and drilling data and the recent related research results,this paper systematically analyzes the diversity and complexity of evolution process of crustal lithosphere structure and basin structure in the Pearl River Mouth Basin on the northern margin of the South China Sea.Three types of detachment faults of different structural levels exist:crust-mantle detachment,inter-crust detachment and upper crust detachment.It is considered that different types of extensional detachment control different subbasin structures.Many fault depressions controlled by upper crust detachment faults have been found in the Zhu I Depression located in the proximal zone.These detachment faults are usually reformed by magma emplacement or controlled by preexisting faults.Baiyun-Liwan Sag located in the hyperextension area shows different characteristics of internal structure.The Baiyun main sag with relative weak magmatism transformation is a wide-deep fault depression,which is controlled by crust-mantle detachment system.Extensive magmatism occurred in the eastern and southwest fault steps of the Baiyun Sag after Middle Eocene,and the crust ductile extensional deformation resulted in wide-shallow fault depression controlled by the upper crust detachment fault.Based on the classical lithosphere extensional breaking and basin tectonic evolution in the Atlantic margin,it is believed that the magmatic activities and pre-existing structures in the Mesozoic subduction continental margin background are important controlling factors for the diversified continental margin faulted structures in the northern South China Sea.展开更多
Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and...Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.展开更多
In January 2010, the Suining Ms5.0 earthquake occurred in central Sichuan Basin, with the epicenter in Moxi-Longnvsi structural belt and a focal depth of 10 km. Based on structural interpretations of seismic profiles ...In January 2010, the Suining Ms5.0 earthquake occurred in central Sichuan Basin, with the epicenter in Moxi-Longnvsi structural belt and a focal depth of 10 km. Based on structural interpretations of seismic profiles in this area, we recognized a regional detachment fault located at a depth of 9-10 km in the Presinian basement of the Suining area, transferring its slipping from NW to SE orientation. This detachment fault slipped from NW to SE, and underwent several shears and bends, which caused the basement to be rolled in and the overlaying strata fold deformation. It formed a fault-bend fold in the Moxi area with an approximate slip of 4 km. Correspondingly, the formation of the Moxi anticline is related to the detachment fault. With the earthquake's epicenter on the ramp of the detachment fault, there is a new point of view that the Suining earthquake was caused by re-activation of this basement detachment fault. Since the Late Jurassic period, under the influence of regional tectonic stress, the detachment fault transfered its slip from the Longmen Mountains (LMS) thrust belt to the hinterland of the Sichuan Basin, and finally to the piedmont zone of southwest Huayingshan (HYS), which indicates that HYS might be the final front area of the LMS thrust belt.展开更多
Hydrothermal vent incidence was once thought to be proportional to the spreading rate of the mid-ocean ridges(MORs).However,more and more studies have shown that the ultraslow-spreading ridges(e.g.,Southwest Indian Ri...Hydrothermal vent incidence was once thought to be proportional to the spreading rate of the mid-ocean ridges(MORs).However,more and more studies have shown that the ultraslow-spreading ridges(e.g.,Southwest Indian Ridge(SWIR))have a relatively higher incidence of hydrothermal venting fields.The Qiaoyue Seamount(52.1°E)is located at the southern side of segment#25 of the SWIR,to the west of the Gallieni transform fault.The Chinese Dayang cruises conducted eight preliminary deep-towed surveys of hydrothermal activity in the area during 2009 and 2018.Here,through comprehensive analyses of the video and photos obtained by the deep-towed platforms,rock samples,and water column turbidity anomalies,a high-temperature,ultramafic-hosted hydrothermal system is predicted on the northern flank of the Qiaoyue Seamount.We propose that this hydrothermal system is most likely to be driven by gabboric intrusions.Efficient hydrothermal circulation channels appear against a backdrop of high rock permeability related to the detachment fault.展开更多
We present an improved geometric model of faulted detachment folding with pure shear that is characterized by core thickening and a ramp-discordant backlimb. The model includes a two-stage evolution: 1) detachment f...We present an improved geometric model of faulted detachment folding with pure shear that is characterized by core thickening and a ramp-discordant backlimb. The model includes a two-stage evolution: 1) detachment folding involving pure shear with fixed hinges, and 2) faulted detachment folding, in which the core of anticline thrusts above a break-through fault in forelimb by limb rotation. The growth strata patterns of the model are also discussed with respect to factors such as limb rotation, tectonic uplift rate, and sedimentation rate. A thrust-related fold, called a TBE thrust fold, in the Tarim Basin in NW China, is analyzed as an example of the theoretical model. The result indicates that the TBE thrust fold has undergone a two-stage evolution with shortening of a few hundred meters. Both the theoretical model and the actual example indicate that the shortening in the detachment folding stage takes up a large proportion of the total shortening. The structural restoration of the TBE thrust fold also provides new evidence that the formation of a series of thin-skinned structures in the SE Tarim Basin initiated in the Late Ordovician. The model may be applicable to low-amplitude faulted detachment folds.展开更多
The Aegean area of the western Anatolian region of Turkey,controlled by the low-angle detachment normal fault system,forms an extensional province,the West Anatolian Extensional Province(WAEP).The tectonic deformation...The Aegean area of the western Anatolian region of Turkey,controlled by the low-angle detachment normal fault system,forms an extensional province,the West Anatolian Extensional Province(WAEP).The tectonic deformation which occurred in the Miocene Period,including the Plio–Quaternary Period has created different structures in both the basement rocks and intra-basin deposits of the crust.One of these structures,high-angle normal faults,controls the supradetachment Soke-Kusadasi Basin(SKB).Within this basin,there are folds with different axes and thrust faults with a north-northwestnortheast(N,NW,NE)trend.These folds and thrust faults in the SKB deformed the sedimentary structures of intra-basin deposits.The folds and thrust faults,which caused the rotation of beddings and imbrications in the SKB,are mainly associated with the tectonic process of the low angle detachment normal fault,which affected the SKB and the Aegean part of western Anatolia.In the SKB,during the process of extensional deformation associated with primary low angle detachment normal faulting,the ramp-flat and inversion geometry observed in the basement rocks and basin deposits of the crust caused folds and thrust faults in only intra-basin deposits.In the WAEP,it is determined for the first time that the folds and thrust faults causing limited shortening deformed the Plio–Quaternary sediments.展开更多
Polymetallic sulfides present in mid-ocean ridges(MORs)have become important strategic resources for humans,and a scientific metallogenic model is necessary for the investigation and exploration of these resources.Com...Polymetallic sulfides present in mid-ocean ridges(MORs)have become important strategic resources for humans,and a scientific metallogenic model is necessary for the investigation and exploration of these resources.Compared to fast-and slow-spreading MORs,ultraslow-spreading MORs show substantial differences in magma supply,tectonic activity,and oceanic crust structures.However,information on hydrothermal circulation and a metallogenic model related to sulfides along the ultraslow-spreading ridges is still limited,which hinders further exploration of these resources.In this study,the distribution of hydrothermal activities,as well as the characteristics of the structures,heat sources,fluid pathways,host rock types,fluid properties,and sulfide assemblages in typical hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge(SWIR),have been studied.It is concluded that the hydrothermal systems along the SWIR can be categorized into three types,including local enhanced magma-controlled,one-way detachment/high-angle large-offset fault-controlled,and flip-flop detachment-controlled types,which are further categorized into five subtypes based on their distinct geological backgrounds.Herein,we present a sulfide metallogenic model called Local Enhanced Heat Supply-Deep Faults(eHeat-dFault)for the SWIR.The overall spreading rate remains almost constant(14-18 mm/year),while the magma supply is heterogeneous in the segment scale along the SWIR.Over the past two decades,various hydrothermal systems and sulfide deposits have been identified along the SWIR.A deep magma chamber(4-9 km)is developed in the ridge segment with sufficient magma supply owing to the local enhanced magma supply,while long-lived active deep detachment faults(up to 13 km)with associated metallogenic belts are developed in ridge segments with poor magma supply.Hence,the ultraslow-spreading MORs fulfill the necessary conditions of a sustained heat source and stable hydrothermal pathway for the formation of large-scale polymetallic sulfide deposits.The number of hydrothermal fields detected in the investigation area is 2-3 times that predicted by the traditional Spreading Rate-Magma Flux model,demonstrating its significant endowment for sulfide resources.A balance between magma supply and faulting may influence the type and depth of hydrothermal circulation,the frequency of hydrothermal activity along the axis,and the scale of sulfide deposits.Spreading rate was previously believed to control heat sources,magma supply,and tectonic processes.However,for the SWIR,we suggest that local enhanced heat supply and deep detachment faults have a greater influence than the spreading rate on hydrothermal circulation and sulfide mineralization.The eHeat-dFault sulfide metallogenic model proposed herein could provide guidance for further exploration and research on polymetallic sulfides in ultraslow-spreading SWIR.展开更多
基金The National Science and Technology Major Project of China under contract No.2011ZX05025-002-02the National Natural Sci-ence Foundation of China under contract Nos 41272121,91028009 and 41102071
文摘Using regional geological, newly acquired 2D and 3D seismic, drilling and well log data, especially 2D long cable seismic profiles, the structure and stratigraphy in the deep-water area of Qiongdongnan Basin are interpreted. The geometry of No.2 fault system is also re-defined, which is an important fault in the central depression belt of the deep-water area in the Qiongdongnan Basin by employing the quantitative analysis techniques of fault activity and backstripping. Furthermore, the dynamical evolution of the No.2 fault sys-tem and its controls on the central depression belt are analyzed. This study indicates that the Qiongdongnan Basin was strongly influenced by the NW-trending tensile stress field during the Late Eocene. At this time, No.2 fault system initiated and was characterized by several discontinuous fault segments, which controlled a series small NE-trending fault basins. During the Oligocene, the regional extensional stress field changed from NW-SE to SN with the oceanic spreading of South China Sea, the early small faults started to grow along their strikes, eventually connected and merged as the listric shape of the No.2 fault system as ob-served today. No.2 fault detaches along the crustal Moho surface in the deep domain of the seismic profiles as a large-scale detachment fault. A large-scale rollover anticline formed in hanging wall of the detachment fault. There are a series of small fault basins in both limbs of the rollover anticline, showing that the early small basins were involved into fold deformation of the rollover anticline. Structurally, from west to east, the central depression belt is characterized by alternatively arranged graben and half-graben. The central depression belt of the Qiongdongnan Basin lies at the extension zone of the tip of the V-shaped northwest-ern ocean sub-basin of the South China Sea, its activity period is the same as the development period of the northwestern ocean sub-basin, furthermore the emplacement and eruption of magma that originated from the mantle below the Moho surface occurred at the region between Songnan-Baodao and Changchang sags, from east to west with the early-stage spreading of the South China Sea. Therefore, this study not only helps in depicting the structural features and evolution of the deep-water basin in the Qiongdongnan Basin, but also provides the geological and structural evidence for establishing a unified model of continental margin extension and oceanic spreading.
基金The National Natural Science Foundation of China under contract Nos 91028006 and 41206046the Dayang 115 under contact No.DYXM-115-02-3-01
文摘Large-scale detachment faults on mid-ocean ridges (MORs) provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively high residual Bouguer gravity anomaly and P-wave velocity, and are commonly associated with ocean- ic core complex. According to 30 detachment faults identified on MORs, we found that their distances to the axis mostly range from 5 to 50 km, half-spreading rates range from 6.8 to 17 mm/a, and activity time ranges from recent to 3 Ma. Most of the detachment faults are developed on the slow spreading Mid-Atlantic Ridge (MAR) and ultra-slow spreading Southwest Indian Ridge (SWIRl, with the dominant half-spreading rates of 7-13 mm/a, especially 10-13 mm/a. Furthermore, they mostly occur at the inside corner of one segment end and result in an asymmetric seafloor spreading. The detachment faults on MORs are mainly controlled by the tectonism and influenced by the magmatism. Long-lived detachment faults tend to be formed where the ridge magma supply is at a moderate level, although the tectonism is a first-order controlling factor. At the slow spreading ridges, detachment faults tend to occur where local magma supply is relatively low, whilst at the ultra-slow spreading ridges, they normally occur where local magma supply is relatively high. These faults are accompanied by hydrothermal activities, with their relationships being useful in the study of hydrothermal polymetallic sulfides and their origin.
基金Supported by the China National Science and Technology Major Project(2016ZX05026-003,2011ZX05025-003)Science and Technology Project of CNOOC Limited(YXKY-2012-SHENHAI-01)CNOOC-KJ 135 ZDXM 37 SZ 01 SHENHAI。
文摘Based on the new seismic and drilling data and the recent related research results,this paper systematically analyzes the diversity and complexity of evolution process of crustal lithosphere structure and basin structure in the Pearl River Mouth Basin on the northern margin of the South China Sea.Three types of detachment faults of different structural levels exist:crust-mantle detachment,inter-crust detachment and upper crust detachment.It is considered that different types of extensional detachment control different subbasin structures.Many fault depressions controlled by upper crust detachment faults have been found in the Zhu I Depression located in the proximal zone.These detachment faults are usually reformed by magma emplacement or controlled by preexisting faults.Baiyun-Liwan Sag located in the hyperextension area shows different characteristics of internal structure.The Baiyun main sag with relative weak magmatism transformation is a wide-deep fault depression,which is controlled by crust-mantle detachment system.Extensive magmatism occurred in the eastern and southwest fault steps of the Baiyun Sag after Middle Eocene,and the crust ductile extensional deformation resulted in wide-shallow fault depression controlled by the upper crust detachment fault.Based on the classical lithosphere extensional breaking and basin tectonic evolution in the Atlantic margin,it is believed that the magmatic activities and pre-existing structures in the Mesozoic subduction continental margin background are important controlling factors for the diversified continental margin faulted structures in the northern South China Sea.
文摘Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.
基金support from the National Basic Research Program(No:2006CB202300)National Natural Science Foundation of China(Grant No:40739906)
文摘In January 2010, the Suining Ms5.0 earthquake occurred in central Sichuan Basin, with the epicenter in Moxi-Longnvsi structural belt and a focal depth of 10 km. Based on structural interpretations of seismic profiles in this area, we recognized a regional detachment fault located at a depth of 9-10 km in the Presinian basement of the Suining area, transferring its slipping from NW to SE orientation. This detachment fault slipped from NW to SE, and underwent several shears and bends, which caused the basement to be rolled in and the overlaying strata fold deformation. It formed a fault-bend fold in the Moxi area with an approximate slip of 4 km. Correspondingly, the formation of the Moxi anticline is related to the detachment fault. With the earthquake's epicenter on the ramp of the detachment fault, there is a new point of view that the Suining earthquake was caused by re-activation of this basement detachment fault. Since the Late Jurassic period, under the influence of regional tectonic stress, the detachment fault transfered its slip from the Longmen Mountains (LMS) thrust belt to the hinterland of the Sichuan Basin, and finally to the piedmont zone of southwest Huayingshan (HYS), which indicates that HYS might be the final front area of the LMS thrust belt.
基金The National Key Research and Development Program of China under contract No.2016YFC0304905the National Natural Science Foundation of China under contract No.41806076+1 种基金the Scientific Research Fund of the Second Institute of Oceanography,MNR under contract No.JG1804the China Ocean Mineral Resources R&D Association(COMRA)Major Project under contract Nos DY135-S1-1-01,DY135-S1-1-02 and DY135-S1-1-09。
文摘Hydrothermal vent incidence was once thought to be proportional to the spreading rate of the mid-ocean ridges(MORs).However,more and more studies have shown that the ultraslow-spreading ridges(e.g.,Southwest Indian Ridge(SWIR))have a relatively higher incidence of hydrothermal venting fields.The Qiaoyue Seamount(52.1°E)is located at the southern side of segment#25 of the SWIR,to the west of the Gallieni transform fault.The Chinese Dayang cruises conducted eight preliminary deep-towed surveys of hydrothermal activity in the area during 2009 and 2018.Here,through comprehensive analyses of the video and photos obtained by the deep-towed platforms,rock samples,and water column turbidity anomalies,a high-temperature,ultramafic-hosted hydrothermal system is predicted on the northern flank of the Qiaoyue Seamount.We propose that this hydrothermal system is most likely to be driven by gabboric intrusions.Efficient hydrothermal circulation channels appear against a backdrop of high rock permeability related to the detachment fault.
文摘We present an improved geometric model of faulted detachment folding with pure shear that is characterized by core thickening and a ramp-discordant backlimb. The model includes a two-stage evolution: 1) detachment folding involving pure shear with fixed hinges, and 2) faulted detachment folding, in which the core of anticline thrusts above a break-through fault in forelimb by limb rotation. The growth strata patterns of the model are also discussed with respect to factors such as limb rotation, tectonic uplift rate, and sedimentation rate. A thrust-related fold, called a TBE thrust fold, in the Tarim Basin in NW China, is analyzed as an example of the theoretical model. The result indicates that the TBE thrust fold has undergone a two-stage evolution with shortening of a few hundred meters. Both the theoretical model and the actual example indicate that the shortening in the detachment folding stage takes up a large proportion of the total shortening. The structural restoration of the TBE thrust fold also provides new evidence that the formation of a series of thin-skinned structures in the SE Tarim Basin initiated in the Late Ordovician. The model may be applicable to low-amplitude faulted detachment folds.
文摘The Aegean area of the western Anatolian region of Turkey,controlled by the low-angle detachment normal fault system,forms an extensional province,the West Anatolian Extensional Province(WAEP).The tectonic deformation which occurred in the Miocene Period,including the Plio–Quaternary Period has created different structures in both the basement rocks and intra-basin deposits of the crust.One of these structures,high-angle normal faults,controls the supradetachment Soke-Kusadasi Basin(SKB).Within this basin,there are folds with different axes and thrust faults with a north-northwestnortheast(N,NW,NE)trend.These folds and thrust faults in the SKB deformed the sedimentary structures of intra-basin deposits.The folds and thrust faults,which caused the rotation of beddings and imbrications in the SKB,are mainly associated with the tectonic process of the low angle detachment normal fault,which affected the SKB and the Aegean part of western Anatolia.In the SKB,during the process of extensional deformation associated with primary low angle detachment normal faulting,the ramp-flat and inversion geometry observed in the basement rocks and basin deposits of the crust caused folds and thrust faults in only intra-basin deposits.In the WAEP,it is determined for the first time that the folds and thrust faults causing limited shortening deformed the Plio–Quaternary sediments.
基金supported by the National Key Research and Development Program(Grant No.2022YFE0140200)the National Major Research Instrument Development Project of the National Natural Science Foundation of China(Grant No.42127807)+1 种基金the Key Research and Development Program of Zhejiang Province(Grant No.2021C03016)the China Ocean Mineral Resources R&D Association(COMRA)“the 13th Five-year”Project(Grant No.DY135-S1-1).
文摘Polymetallic sulfides present in mid-ocean ridges(MORs)have become important strategic resources for humans,and a scientific metallogenic model is necessary for the investigation and exploration of these resources.Compared to fast-and slow-spreading MORs,ultraslow-spreading MORs show substantial differences in magma supply,tectonic activity,and oceanic crust structures.However,information on hydrothermal circulation and a metallogenic model related to sulfides along the ultraslow-spreading ridges is still limited,which hinders further exploration of these resources.In this study,the distribution of hydrothermal activities,as well as the characteristics of the structures,heat sources,fluid pathways,host rock types,fluid properties,and sulfide assemblages in typical hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge(SWIR),have been studied.It is concluded that the hydrothermal systems along the SWIR can be categorized into three types,including local enhanced magma-controlled,one-way detachment/high-angle large-offset fault-controlled,and flip-flop detachment-controlled types,which are further categorized into five subtypes based on their distinct geological backgrounds.Herein,we present a sulfide metallogenic model called Local Enhanced Heat Supply-Deep Faults(eHeat-dFault)for the SWIR.The overall spreading rate remains almost constant(14-18 mm/year),while the magma supply is heterogeneous in the segment scale along the SWIR.Over the past two decades,various hydrothermal systems and sulfide deposits have been identified along the SWIR.A deep magma chamber(4-9 km)is developed in the ridge segment with sufficient magma supply owing to the local enhanced magma supply,while long-lived active deep detachment faults(up to 13 km)with associated metallogenic belts are developed in ridge segments with poor magma supply.Hence,the ultraslow-spreading MORs fulfill the necessary conditions of a sustained heat source and stable hydrothermal pathway for the formation of large-scale polymetallic sulfide deposits.The number of hydrothermal fields detected in the investigation area is 2-3 times that predicted by the traditional Spreading Rate-Magma Flux model,demonstrating its significant endowment for sulfide resources.A balance between magma supply and faulting may influence the type and depth of hydrothermal circulation,the frequency of hydrothermal activity along the axis,and the scale of sulfide deposits.Spreading rate was previously believed to control heat sources,magma supply,and tectonic processes.However,for the SWIR,we suggest that local enhanced heat supply and deep detachment faults have a greater influence than the spreading rate on hydrothermal circulation and sulfide mineralization.The eHeat-dFault sulfide metallogenic model proposed herein could provide guidance for further exploration and research on polymetallic sulfides in ultraslow-spreading SWIR.