The performance of combustion driver ignited by multi-spark plugs distributed along axial direction has been analysed and tested. An improved ignition method with three circumferential equidistributed ignitors at main...The performance of combustion driver ignited by multi-spark plugs distributed along axial direction has been analysed and tested. An improved ignition method with three circumferential equidistributed ignitors at main diaphragm has been presented, by which the produced incident shock waves have higher repeatability, and better steadiness in the pressure, temperature and velocity fields of flow behind the incidence shock, and thus meets the requirements of aerodynamic experiment. The attachment of a damping section at the end of the driver can eliminate the high reflection pressure produced by detonation wave, and the backward detonation driver can be employed to generate high enthalpy and high density test flow. The incident shock wave produced by this method is well repeated and with weak attenuation. The reflection wave caused by the contracted section at the main diaphragm will weaken the unfavorable effect of rarefaction wave behind the detonation wave, which indicates that the forward detonation driver can be applied in the practice. For incident shock wave of identical strength, the initial pressure of the forward detonation driver is about 1 order of magnitude lower than that of backward detonation.展开更多
目前以碳氢燃料与空气可爆混合物的直管爆震室存在较长的爆燃向爆震转变(Deflagration to Detonation Transition,简称'DDT')距离,从而导致发动机整机长度过长等问题。为解决此问题,采用8种螺旋构型的爆震管替代现有国内外普遍...目前以碳氢燃料与空气可爆混合物的直管爆震室存在较长的爆燃向爆震转变(Deflagration to Detonation Transition,简称'DDT')距离,从而导致发动机整机长度过长等问题。为解决此问题,采用8种螺旋构型的爆震管替代现有国内外普遍研究的直管构型的爆震管进行了一系列实验。首先对不同螺旋结构的爆震管进行冷态流阻特性实验,得出了螺旋结构参数和流阻的关系;再结合冷态实验结果,选取4种螺旋结构进行了热态爆震实验。实验结果表明,所有螺旋结构均可获得充分发展的爆震波;螺旋爆震管缓燃向爆震转变时间随螺旋中轴线曲率半径增加而减小;相对于长2.0m的直管爆震管,螺旋爆震管DDT时间缩短了0.415～0.589ms,DDT距离沿螺旋线方向缩短了0.35m,爆震管轴向长度缩短了0.78～1.28m。展开更多
基金State Science and Technology CommitteeNational Natural Foundation of Science of China (19082012)+1 种基金 Chinese Academy of SciencesProject of National High Technology of China.
文摘The performance of combustion driver ignited by multi-spark plugs distributed along axial direction has been analysed and tested. An improved ignition method with three circumferential equidistributed ignitors at main diaphragm has been presented, by which the produced incident shock waves have higher repeatability, and better steadiness in the pressure, temperature and velocity fields of flow behind the incidence shock, and thus meets the requirements of aerodynamic experiment. The attachment of a damping section at the end of the driver can eliminate the high reflection pressure produced by detonation wave, and the backward detonation driver can be employed to generate high enthalpy and high density test flow. The incident shock wave produced by this method is well repeated and with weak attenuation. The reflection wave caused by the contracted section at the main diaphragm will weaken the unfavorable effect of rarefaction wave behind the detonation wave, which indicates that the forward detonation driver can be applied in the practice. For incident shock wave of identical strength, the initial pressure of the forward detonation driver is about 1 order of magnitude lower than that of backward detonation.
文摘目前以碳氢燃料与空气可爆混合物的直管爆震室存在较长的爆燃向爆震转变(Deflagration to Detonation Transition,简称'DDT')距离,从而导致发动机整机长度过长等问题。为解决此问题,采用8种螺旋构型的爆震管替代现有国内外普遍研究的直管构型的爆震管进行了一系列实验。首先对不同螺旋结构的爆震管进行冷态流阻特性实验,得出了螺旋结构参数和流阻的关系;再结合冷态实验结果,选取4种螺旋结构进行了热态爆震实验。实验结果表明,所有螺旋结构均可获得充分发展的爆震波;螺旋爆震管缓燃向爆震转变时间随螺旋中轴线曲率半径增加而减小;相对于长2.0m的直管爆震管,螺旋爆震管DDT时间缩短了0.415～0.589ms,DDT距离沿螺旋线方向缩短了0.35m,爆震管轴向长度缩短了0.78～1.28m。
