DESIGN OF A NOVEL DEXTEROUS ROBOT HAND

In the robotic community more and more hands are developed. Based on theexperience of HIT Hand and DLR Hand II, a smaller and easier manufactured dexterous robot hand withmultisen-sory function and high integration is jointly developed. The prototype of the hand issuccessfully built. It has 4 fingers in total 13-DOFs (degree of freedom). Each finger has 3-DOFsand 4 joints, the last 2 joints are mechanically coupled by means of four-bar linkage mechanism. Italso has an additional DOF to realize motion of the thumb relative to the palm. The fingertip forcecan reach up to 10 N. Full integration of mechanical body, actuation system, multisensory system andelectronics is a significant feature. DSP based control system is implemented in PCI busarchitecture and the serial communication between the hand and DSP needs only 2 lines.

Cartesian impedance control of dexterous robot hand

Presents a novel compliant motion control for a robot hand using the Cartesian impedance approach based on fingertip force measurements. The fingertip can accurately track desired motion in free space and appear as mechanical impedance in constrained space. In the position based impedance control strategy, any switching mode in contact transition phase is not needed. The impedance parameters can be adjusted in a certain range according to various tasks. In this paper, the analysis of the finger’s kinematics and dynamics is given. Experimental results have shown the effectiveness of this control strategy.

Design and control of integrated pneumatic dexterous robot finger

Based on flexible pneumatic actuator(FPA),bending joint and side-sway joint,a new kind of pneumatic dexterous robot finger was developed.The finger is equipped with one five-component force sensor and four contactless magnetic rotary encoders.Mechanical parts and FPAs are integrated,which reduces the overall size of the finger.Driven by FPA directly,the joint output torque is more accurate and the friction and vibration can be effectively reduced.An improved adaptive genetic algorithm(IAGA) was adopted to solve the inverse kinematics problem of the redundant finger.The statics of the finger was analyzed and the relation between fingertip force and joint torque was built.Finally,the finger force/position control principle was introduced.Tracking experiments of fingertip force/position were carried out.The experimental results show that the fingertip position tracking error is within ±1 mm and the fingertip force tracking error is within ±0.4 N.It is also concluded from the theoretical and experimental results that the finger can be controlled and it has a good application prospect.

Flexible Robotic Grasping Strategy with Constrained Region in Environment

Grasping is a significant yet challenging task for the robots. In this paper, the grasping problem for a class of dexterous robotic hands is investigated based on the novel concept of constrained region in environment, which is inspired by the grasping operations of the human beings. More precisely, constrained region in environment is formed by the environment, which integrates a bio-inspired co-sensing framework. By utilizing the concept of constrained region in environment, the grasping by robots can be effectively accomplished with relatively low-precision sensors. For the grasping of dexterous robotic hands, the attractive region in environment is first established by model primitives in the configuration space to generate offline grasping planning. Then, online dynamic adjustment is implemented by integrating the visual sensory and force sensory information, such that the uncertainty can be further eliminated and certain compliance can be obtained. In the end, an experimental example of BarrettHand is provided to show the effectiveness of our proposed grasping strategy based on constrained region in environment.