Curved Spine:The Shape of Spine in Taoist Body Diagrams and Its Influence on Medical Body Diagrams

From the early Taoist diagrams of the human body to the end of the Qing dynasty and the beginning of the Republic of China,Taoists exaggerated and deformed the human spine in a shape-shifting manner.It is likely that medical practitioners were influenced by this style of representation,and there are also numerous diagrams of the human body with the curved spine in the lateral-view diagrams of viscera and Ming Tang Tu(明堂图Acupuncture and Moxibustion Chart),which constantly show the human torso in an elliptical“egg shape”.No later than the Ming dynasty,medical practitioners began to depict the actual physiological spinal curve of the human body.By the Qing dynasty,the depiction of the spinal curve in medical diagrams of the human figure showed a tendency to part ways with the Taoist freehand style of the previous generation.Although the representation of the curve of the spine was very crude,later medical images of the human body at least gradually straightened the spine and no longer depicted it in a shape-shifting manner.However,the curved spine in Taoist diagrams of the human body continued to exist,and the presentation of the curved spine never changed.This way of depicting its appearance,which is very different from reality,is shaped by Taoism's special way of perceiving and viewing the body,and may also contain another form of truth.

Phase diagram and quench dynamics of a periodically drivenHaldane model

We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find that anomalous Floquet topological phases exist in the system.Focusing on examining the quench dynamics among topological phases,we analyze the site distribution of the 0-mode and p-mode edge states in long-period evolution after a quench.The results demonstrate that,under certain conditions,the site distribution of the 0-mode can be confined at the edge even in long-period evolution.Additionally,both the 0-mode and p-mode can recover and become confined at the edge in long-period evolution when the post-quench parameters(T,M_(2) /M_(1))in the phase diagram cross away from the phase boundary (M_(2)/ M_(1))=(6√3t2)/ M_(1)−1.Furthermore,we conclude that whether the edge state is confined at the edge in the long-period evolution after a quench depends on the similarity of the edge states before and after the quench.Our findings reveal some new characteristics of quench dynamics in a periodically driven system.

Manipulating Zr/Ti ratio based on phase diagram for large electrocaloric effects with multiple target operation temperatures in PLZT ceramics

Ferroelectric phase transition has been identified as a promising avenue for designing high-performanceelectrocaloric materials for zero-emission and solid-state refrigeration. However, extensive research has been limited todeveloping ferroelectric materials with large electrocaloric effects near room temperature, preventing them from meetingdiverse refrigeration requirements. In this study, by leveraging the room-temperature phase diagram of the (PbLa)(ZrTi)O_(3)solution, we prepared a series of Pb_(0.775)La_(0.15)Zr_(x)Ti_(1−x)O_(3) bulk ceramics spanning the ferroelectric and relaxor ferroelectricphase regions. This enabled the attainment of various phase transition features and temperatures. Finally, largeelectrocaloric effects, coupled with adjustable operation temperatures ranging from 150 to −45℃, are successfullyachieved through manipulation of the Zr/Ti ratio. This comprehensive range of operation temperatures effectively addressesdiverse refrigeration application requirements, ranging from industrial equipment to freezer cabinets. This work not onlyunderscores the expansion of the electrocaloric refrigeration application domain but also proposes a material designstrategy tailored to meet these evolving demands.

Recension of boron nitride phase diagram based on high-pressure and high-temperature experiments

Cubic boron nitride and hexagonal boron nitride are the two predominant crystalline structures of boron nitride.They can interconvert under varying pressure and temperature conditions.However,this transformation requires overcoming significant potential barriers in dynamics,which poses great difficulty in determining the c-BN/h-BN phase boundary.This study used high-pressure in situ differential thermal measurements to ascertain the temperature of h-BN/c-BN conversion within the commonly used pressure range(3-6 GPa)for the industrial synthesis of c-BN to constrain the P-T phase boundary of h-BN/c-BN in the pressure-temperature range as much as possible.Based on the analysis of the experimental data,it is determined that the relationship between pressure and temperature conforms to the following equation:P=a+1/bT.Here,P denotes the pressure(GPa)and T is the temperature(K).The coefficients are a=-3.8±0.8 GPa and b=229.8±17.1 GPa/K.These findings call into question existing high-pressure and high-temperature phase diagrams of boron nitride,which seem to overstate the phase boundary temperature between c-BN and h-BN.The BN phase diagram obtained from this study can provide critical temperature and pressure condition guidance for the industrial synthesis of c-BN,thus optimizing synthesis efficiency and product performance.

A Future Life of Binary Phase Diagrams

The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.

E-pH diagram of ZnS-H_2O system during high pressure leaching of zinc sulfide

The values of GΘ,EΘ or pH from 110 to 160℃ were calculated and the relevant potential expressions were obtained.E-pH diagrams of ZnS-H2O system at oxygen partial pressure of 0.8 MPa,ionic activity of 1.0 and different temperatures were drawn through thermodynamical calculation.With the temperature increasing,the stable regions of S and Zn(Ⅱ) in the E-pH diagrams become gradually larger,but the amplification decreases over 150℃.The impacts of leaching parameters,such as temperature,liquid to solid ratio,initial acidic concentration,leaching time,oxygen partial pressure and stirring speed on the leaching rate of Zn(Ⅱ) and conversion rate of S in the single factor of high pressure leaching experiment of ZnS in autoclave,were studied.The leaching residue was examined by X-ray fluorescence(XRF) chemical composition identification and X-ray diffraction(XRD) phase identification,and the content of the leaching solution was tested by inductively coupled plasma-atomic emission spectrometry(ICP).The experimental results indicate that the leaching rate of zinc increases from 60.05% to 97.85% and the conversion rate of sulfur increases from 38.90% to 80.92% with the temperature increasing from 110℃ to 150℃,5:1 of liquid-to-solid ratio,150 g/L of initial acidic concentration,120 min of leaching time,0.8 MPa of oxygen partial pressure,and 480 r/min of stirring speed,which tend to be stable over 150℃.The experimental results correspond with theoretical calculation.

A NEW METHOD OF COMPUTING MULTI-COMPONENT E-pH DIAGRAMS

Aqueous E pH Diagram is an essential tool for analyzing hydrometallurgical and corrosion processes. Due to the requirements for environmental protection and energy saving in recent years, waste water processing and hydrometallurgical process of concentrate have been greatly developed. The construction of E pH diagrams has turned to multi component systems. However, there are some limits in plotting such diagrams. There is only one diagram for one multi component system, which can not reflect the truth of the aqueous reaction. In the paper, a new computation method is proposed to construct E pH diagrams. Component activity term is used to determine the boundary of stable areas. For the multi component systems, different atom ratios of elements have been taken into account. M S H 2O system is chosen to study since it is of importance in metallurgical solution. Compared with conventional methods, the algorithm is simple and conforms to real conditions.

Petrochemical eigenvalues and diagrams for the identification of metamorphic rocks'protolith,taking the host rocks of Dashuigou tellurium deposit in China as an example

The Dashuigou tellurium deposit is the world’s only known independent tellurium deposit.By restoring metamorphic rocks’protolith,we seek to understand not only the development and evolution trajectory of the region but also the origin of the relevant deposits.While there are many ways to restore metamorphic rocks’protolith,we take the host metamorphic rocks of Dashuigou tellurium deposit and leverage various petrochemical eigenvalues and related diagrams previously proposed to reveal the deposit’s host metamorphic rocks’protolith.The petrochemical eigenvalues include molecular number,Niggli’s value,REE parity ratio,CaO/Al_(2)O_(3)ratio,Fe^(3+) /(Fe^(3+) -+Fe^(2+) )ratio,chondrite-normalized REE value,logarithmic REE value,various REE eigenvalues including scandium,Eu/Sm ratio,total REE amount,light and heavy REEs,δEu,Eu anomaly,Sm/Nd ratio,and silicon isotope δ^(30) SiNBS-29‰,etc.The petrochemical plots include ACMs,100 mg-c-(al+alk),SiO_(2)-(Na_(2)O+K_(2)O),(al+fm)-(c+alk)versus Si,FeO+Fe_(2)O^(3+) TiO)-Al_(2)O_(3)-MgO,c-mg,Al_(2)O_(3)-(Na_(2)O+K_(2)O),chondrite-normalized REE model,La/Yb-REE,and Sm/Nd ratio,etc.On the basis of these comprehensive analyses,the following conclusions are drawn,starting from the many mantle-derived types of basalt developed in the study area of different geological ages,combined with the previously published research results on the deposit s fluid inclusions and sulfur and lead isotopes.The deposit is formed by mantle degassing in the form of a mantle plume in the late Yanshanian orogeny.The degassed fluids are rich in nano-sc ale substances including Fe,Te,S,As,Bi,Au,Se,H_(2),CO_(2),N_(2),H_(2)O,and CH_(4),which are enriched by nano-effect,and then rise to a certain part of the crust in the form of mantle plume along the lithospheric fault to form the deposit.The ultimate power for tellurium mineralization was from H_(2)flow with high energy,which was produced through radiation from the melted iron of the Earth’s outer core.The H,flow results in the Earth’s degassing,as well as the mantle and crust’s uplift.

A reasoning diagram based method for fault diagnosis of railway point system

Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing methods assume that sufficient samples of each failure mode are available,which may be unrealistic,especially for those modes of low occurrence frequency but with high risk.To address this issue,this work proposes a novel fault diagnosis method that only requires the power signals generated under normal RPS operations in the training stage.Specifically,the failure modes of RPS are distinguished through constructing a reasoning diagram,whose nodes are either binary logic problems or those that can be decomposed into the problems of the binary logic.Then,an unsupervised method for the signal segmentation and a fault detection method are combined to make decisions for each binary logic problem.Based on the results of decisions,the diagnostic rules are established to identify the failure modes.Finally,the data collected from multiple real-world RPSs are used for validation and the results demonstrate that the proposed method outperforms the benchmark in identifying the faults of RPSs.

Solving Algebraic Problems with Geometry Diagrams Using Syntax-Semantics Diagram Understanding

Solving Algebraic Problems with Geometry Diagrams(APGDs)poses a significant challenge in artificial intelligence due to the complex and diverse geometric relations among geometric objects.Problems typically involve both textual descriptions and geometry diagrams,requiring a joint understanding of these modalities.Although considerable progress has been made in solving math word problems,research on solving APGDs still cannot discover implicit geometry knowledge for solving APGDs,which limits their ability to effectively solve problems.In this study,a systematic and modular three-phase scheme is proposed to design an algorithm for solving APGDs that involve textual and diagrammatic information.The three-phase scheme begins with the application of the statetransformer paradigm,modeling the problem-solving process and effectively representing the intermediate states and transformations during the process.Next,a generalized APGD-solving approach is introduced to effectively extract geometric knowledge from the problem’s textual descriptions and diagrams.Finally,a specific algorithm is designed focusing on diagram understanding,which utilizes the vectorized syntax-semantics model to extract basic geometric relations from the diagram.A method for generating derived relations,which are essential for solving APGDs,is also introduced.Experiments on real-world datasets,including geometry calculation problems and shaded area problems,demonstrate that the proposed diagram understanding method significantly improves problem-solving accuracy compared to methods relying solely on simple diagram parsing.

Prediction and Verifcation of Forming Limit Diagrams Based on a Modifed Shear Failure Criterion

The forming limit diagram plays an important role in predicting the forming limit of sheet metals.Previous studies have shown that,the method to construct the forming limit diagram based on instability theory of the original shear failure criterion is efective and simple.The original shear instability criterion can accurately predict the left area of the forming limit diagram but not the right area.In this study,in order to improve the accuracy of the original shear failure criterion,a modifed shear failure criterion was proposed based on in-depth analysis of the original shear failure criterion.The detailed improvement strategies of the shear failure criterion and the complete calculation process are given.Based on the modifed shear failure criterion and diferent constitutive equations,the theoretical forming limit of TRIP780 steel and 5754O aluminum alloy sheet metals are calculated.By comparing the theoretical and experimental results,it is shown that proposed modifed shear failure criterion can predict the right area of forming limit more reasonably than the original shear failure criterion.The efect of the pre-strain and constitutive equation on the forming limits are also analyzed in depth.The modifed shear failure criterion proposed in this study provides an alternative and reliable method to predict forming limit of sheet metals.

Reliability Analysis of Satellite Turntable System under Multiple Operation Modes Based on Multi-Valued Decision Diagrams

As a payload support system deployed on satellites,the turntable system is often switched among different working modes during the on-orbit operation,which can experience great state changes.In each mode,the missions to be completed are different,consecutive and non-over-lapping,from which the turntable system can be considered to be a phased-mission system(PMS).Reliability analysis for PMS has been widely studied.However,the system mode cycle characteristic has not been taken into account before.In this paper,reliability analysis method of the satellite turntable system is proposed considering its multiple operation modes and mode cycle characteristic.Firstly,the multi-valued decision diagrams(MDD)manipulation rules between two adjacent mission cycles are proposed.On this basis,MDD models for the turntable system in different states are established and the reliability is calculated using the continuous time Markov chains(CTMC)method.Finally,the comparative study is carried out to show the effectiveness of our proposed method.

基于特征图像组合与改进ResNet-18的电能质量扰动识别方法

针对传统电能质量扰动(power quality disturbance,PQD)识别体系中单一图像特征信息受限与算法识别能力不足等问题,依据特征融合的思想,提出一种基于特征图像组合与改进ResNet-18的PQD识别方法。首先,对PQD信号进行变分模态分解(variational mode decomposition,VMD)得到一系列固有模态函数(intrinsic mode functions,IMFs)与残差分量;其次,将IMFs、残差分量、原始扰动信号与Subtract分量纵向拼接成分量矩阵,利用信号-图像转化方法生成特征分量彩色图;再次,对原始扰动信号进行连续小波变换(continuous wavelet transform,CWT)生成小波时-频图;最后,将特征分量彩色图与小波时-频图组合输入改进的六通道ResNet-18中训练学习并完成扰动识别。通过仿真对PQD识别方法进行分析并将其与目前常用识别体系进行比较。结果表明,所提方法具有较好的抗噪性能并且能够更好地提取PQD特征信息,达到更高的识别准确率。

线上线下双模式教育的应用——以机械电子工程专业必修课《热力学与传热学基础》为例

后疫情时代,为适应教学要求,逐渐衍生出线上线下双模式的教学方式。本文以机械电子工程专业的必修课《热力学与传热学基础》为例介绍了线上线下双模式教育在教学中的应用。首先介绍了《热力学与传热学基础》这门专业必修课的主要授课内容、学习目标和考核标准,其次以理想气体基本热力学过程的p-v图和T-s图为例,说明了双模式教育的应用为教学带来的好处。

基于因果图分析的可解释司法判决预测方法研究

随着人工智能技术的发展和海量司法数据的公开,面向“智慧司法”服务的司法判决预测(legal judgment prediction,LJP)任务受到了学术界和工业界的广泛关注,该任务旨在根据有限的案件事实描述文本来预测案件的罪名、法条和刑期。然而,现有工作缺乏对易混淆司法案件的智能决策的研究,且相关模型通常缺乏可解释性,这会导致模型预测严重依赖领域专家,阻碍LJP在不同法律体系中的应用。为此,提出了一种基于因果图分析的司法判决预测(prediction of legal judgment based on causal graph analysis,CGLJ)方法,首先从非结构化的法律事实描述文本中挖掘要素之间的因果关系,然后采用易混淆罪名聚类的构图方法构建因果图,既考虑了相似事实描述之间的差异,又增强了事实描述和法律法规之间的相互作用,最后将构建好的因果图融入深度神经网络进行联合推理,得到判决预测结果。此外,还对模型预测过程中的因果图推理过程进行了可视化,为判决结果提供了更好的可解释性。在2018中国“法研杯”司法人工智能挑战赛(CAIL2018)司法判决预测数据集上的实验结果表明,该方法相比基线模型取得了更好的效果。

多孔陶瓷的绿色制备工艺研究

从化学组成入手,运用三元相图理论计算陶瓷原料的配比及对应的化学成分,以磷渣作为钙质原料,铝灰作为铝质原料,粉煤灰作为硅质原料,磷石膏作为发泡剂,经混料、成型、养护、烧结制备了多孔陶瓷,当磷渣掺量为76%时,在1080℃下煅烧,保温120 min制备的多孔陶粒堆积密度为353.9 kg/m^(3)、抗压强度为1.06 MPa、吸水率为18.74%,孔隙率为71.8%。统筹考虑了在全生命周期内节约资源,节约能源和使用性能三者之间的统一。

眩晕患者冷热实验荚形图的结果可靠性分析

目的分析眩晕患者冷热实验荚形图类型,了解冷热实验结果的准确性及可靠性,为前庭系统功能评估提供更准确可靠的依据。方法总结分析眩晕诊疗中心2021年7月至2022年5月528例眩晕患者的冷热实验结果,按照荚形图形态及单侧反应减弱(unilateral weakness,UW)分为荚形图冷热对称组、左右对称组、单值显著异常组、双侧数值减下组以及荚形图形态不能分类组,通过比较不同组别UW的结果,对其进行解释及归纳,来辨识不可靠数据,从而减少不可靠数据对临床诊疗的干扰。结果冷热对称的荚形图(439例)表现为双侧前庭功能对称(273例)及一侧前庭功能减低(166例),同侧耳双温刺激冷热气刺激慢相角速度(SPV)差异无统计学意义(P>0.05);左右侧别对称荚形图(14例)包括双侧前庭功能对称(11例)和一侧减低(13例),同侧耳双温刺激SPV值差异有统计学意义(P<0.05);单值显著异常荚形图(36例)包括一侧前庭功能减低(25例)和双侧前庭功能对称(11例),同侧耳双温刺激SPV值差异有统计学意义(P<0.05);双侧数值减低荚形图(34例)可表现为双侧前庭功能对称(25例)及一侧减低(9例),同侧耳双温刺激SPV差异无统计学意义(P>0.05);荚形图形态不能分类(5例)提示干扰因素较多。结论冷热实验显示双耳外周前庭功能对称且正常时,要警惕荚形图中温度效应的存在,需考虑对灌注器的检视及灌注温度的校准;冷热实验提示一侧前庭功能减低时,要注意荚形图中单个数值显著增高或减低的情况,建议重复灌注,仍无改变时,建议重复另一耳此温度下的灌注,甚至重复整个冷热实验;冷热实验荚形图提示双耳外周前庭功能减低时,UW值不能真实反应双侧前庭功能的状态,可改用水灌注重复,并结合病史及其他辅助检查做出正确判断。荚形图的形态结合UW值来综合判断冷热实验的有效性有重要意义。

应力驱动的2.5D梯度各向异性维诺多孔零件轻量化建模方法

为了提高多孔零件的设计自由度、内部力学性能梯度与实际应力分布的匹配度,提出一种应力驱动的2.5D梯度各向异性维诺多孔零件轻量化设计方法。将零件有限元分析结果分解为应力标量场和应力方向场,通过加权随机采样算法将应力标量场映射为零件设计域内的维诺站点分布,实现零件内部力学性能的梯度分布;将应力方向场映射为二维黎曼流形,提出一种基于胞元择优方向生长策略的各向异性维诺图生成算法,生成胞元沿黎曼流形分布的各向异性维诺图。在此基础上,通过偏置算法、调和距离场和拉伸算法生成光滑的梯度各向异性维诺多孔零件。最后,采用有限元分析、三点弯曲实验等方法将所设计的多孔零件和其他多孔零件进行比较分析。实验结果表明,所提出的梯度各向异性维诺多孔零件建模方法能有效提升零件内部力学性能梯度与实际应力分布的匹配度,降低材料消耗,实现轻量化设计。

耐火材料热化学反应典型应用技术发展

高温工业的发展,与耐火材料的发展密切相关,其技术进步无一例外地都依赖于优质耐火材料的研发。耐火材料在制备及应用过程中,都和热化学反应息息相关。本文首先简要介绍了耐火材料的发展历程,其次以二氧化硅质、莫来石质耐火材料为例,介绍了上述耐火材料制备中的热化学反应过程;以莫来石-碳化硅、方镁石-尖晶石、镁碳质耐火材料为例,介绍了上述耐火材料在服役过程中的热化学侵蚀反应行为,并给出了热化学模拟在耐火材料与熔渣/气相反应中的应用情况;以氧化铝-碳质过滤器为例,介绍了其应用过程中的吸附夹杂机理。最后介绍了常用的耐火材料煅烧设备。

二维图纸驱动三维建模的方法

针对船舶设计过程中二维图纸和三维模型之间缺乏有效关联关系的现状,开展二维图纸驱动三维模型的方法研究。开展常用二维原理图绘制软件CAD和SP P&ID的对比分析;针对CAD软件和SP P&ID两种软件输出的不同形式的二维原理图,分别开展二维原理图驱动三维模型的方法研究,分析二维原理图驱动三维建模的流程,研究二维原理图驱动三维建模的机理,解决二维原理图和三维模型之间数据分离的问题,提高船舶设计效率。