Salt-forming regions for a complex salt-water system in non-equilibrium state of evaporation process are usually different from those in solubility diagrams.To understand the solid-forming region of NaCl and improve t...Salt-forming regions for a complex salt-water system in non-equilibrium state of evaporation process are usually different from those in solubility diagrams.To understand the solid-forming region of NaCl and improve the utilization of bittern resources,experiments were carried out to evaporate 20 representative mixture solution samples of Na ^＋,Mg ^2＋ //Cl^-, SO4^2--H2O system with an average evaporation intensity of（1.4±0.4） g·L^-1 ·min^-1（water） at boiling temperature 348 K,and determine the NaCl solid-forming regions in non-equilibrium state.Because of the complexity of salt-forming region,a maximal region and a minimal region were proposed to express the non-equilibrium state salt-forming region with different crystal seed,and a conditional salt-forming region was proposed to present the characteristic region of non-equilibrium salt-forming phase diagram.The areas of the maximal and minimal regions are 2.00 and 1.56 times those in solubility diagram,so it is possible to utilize bittern resources in high efficiency.The recovery rates of NaCl were 99.65%,93.14%,88.57%,72.76%,and 83.68%for six typical bittern sources from Tulantai Salt Lake（China）,Dongtai Salt Lake（China） ,Jilantai Salt Lake（China）,Qarun Salt Lake（Egypt） and seawater,respectively.It is testified that the non-equilibrium state salt-forming phase diagram can be used in industrial processes.展开更多
We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find ...We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find that anomalous Floquet topological phases exist in the system.Focusing on examining the quench dynamics among topological phases,we analyze the site distribution of the 0-mode and p-mode edge states in long-period evolution after a quench.The results demonstrate that,under certain conditions,the site distribution of the 0-mode can be confined at the edge even in long-period evolution.Additionally,both the 0-mode and p-mode can recover and become confined at the edge in long-period evolution when the post-quench parameters(T,M_(2) /M_(1))in the phase diagram cross away from the phase boundary (M_(2)/ M_(1))=(6√3t2)/ (M_(1)−1.Furthermore,we conclude that whether the edge state is confined at the edge in the long-period evolution after a quench depends on the similarity of the edge states before and after the quench.Our findings reveal some new characteristics of quench dynamics in a periodically driven system.展开更多
From the early Taoist diagrams of the human body to the end of the Qing dynasty and the beginning of the Republic of China,Taoists exaggerated and deformed the human spine in a shape-shifting manner.It is likely that ...From the early Taoist diagrams of the human body to the end of the Qing dynasty and the beginning of the Republic of China,Taoists exaggerated and deformed the human spine in a shape-shifting manner.It is likely that medical practitioners were influenced by this style of representation,and there are also numerous diagrams of the human body with the curved spine in the lateral-view diagrams of viscera and Ming Tang Tu(明堂图Acupuncture and Moxibustion Chart),which constantly show the human torso in an elliptical“egg shape”.No later than the Ming dynasty,medical practitioners began to depict the actual physiological spinal curve of the human body.By the Qing dynasty,the depiction of the spinal curve in medical diagrams of the human figure showed a tendency to part ways with the Taoist freehand style of the previous generation.Although the representation of the curve of the spine was very crude,later medical images of the human body at least gradually straightened the spine and no longer depicted it in a shape-shifting manner.However,the curved spine in Taoist diagrams of the human body continued to exist,and the presentation of the curved spine never changed.This way of depicting its appearance,which is very different from reality,is shaped by Taoism's special way of perceiving and viewing the body,and may also contain another form of truth.展开更多
The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reli...The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.展开更多
The Dashuigou tellurium deposit is the world’s only known independent tellurium deposit.By restoring metamorphic rocks’protolith,we seek to understand not only the development and evolution trajectory of the region ...The Dashuigou tellurium deposit is the world’s only known independent tellurium deposit.By restoring metamorphic rocks’protolith,we seek to understand not only the development and evolution trajectory of the region but also the origin of the relevant deposits.While there are many ways to restore metamorphic rocks’protolith,we take the host metamorphic rocks of Dashuigou tellurium deposit and leverage various petrochemical eigenvalues and related diagrams previously proposed to reveal the deposit’s host metamorphic rocks’protolith.The petrochemical eigenvalues include molecular number,Niggli’s value,REE parity ratio,CaO/Al_(2)O_(3)ratio,Fe^(3+) /(Fe^(3+) -+Fe^(2+) )ratio,chondrite-normalized REE value,logarithmic REE value,various REE eigenvalues including scandium,Eu/Sm ratio,total REE amount,light and heavy REEs,δEu,Eu anomaly,Sm/Nd ratio,and silicon isotope δ^(30) SiNBS-29‰,etc.The petrochemical plots include ACMs,100 mg-c-(al+alk),SiO_(2)-(Na_(2)O+K_(2)O),(al+fm)-(c+alk)versus Si,FeO+Fe_(2)O^(3+) TiO)-Al_(2)O_(3)-MgO,c-mg,Al_(2)O_(3)-(Na_(2)O+K_(2)O),chondrite-normalized REE model,La/Yb-REE,and Sm/Nd ratio,etc.On the basis of these comprehensive analyses,the following conclusions are drawn,starting from the many mantle-derived types of basalt developed in the study area of different geological ages,combined with the previously published research results on the deposit s fluid inclusions and sulfur and lead isotopes.The deposit is formed by mantle degassing in the form of a mantle plume in the late Yanshanian orogeny.The degassed fluids are rich in nano-sc ale substances including Fe,Te,S,As,Bi,Au,Se,H_(2),CO_(2),N_(2),H_(2)O,and CH_(4),which are enriched by nano-effect,and then rise to a certain part of the crust in the form of mantle plume along the lithospheric fault to form the deposit.The ultimate power for tellurium mineralization was from H_(2)flow with high energy,which was produced through radiation from the melted iron of the Earth’s outer core.The H,flow results in the Earth’s degassing,as well as the mantle and crust’s uplift.展开更多
Solving Algebraic Problems with Geometry Diagrams(APGDs)poses a significant challenge in artificial intelligence due to the complex and diverse geometric relations among geometric objects.Problems typically involve bo...Solving Algebraic Problems with Geometry Diagrams(APGDs)poses a significant challenge in artificial intelligence due to the complex and diverse geometric relations among geometric objects.Problems typically involve both textual descriptions and geometry diagrams,requiring a joint understanding of these modalities.Although considerable progress has been made in solving math word problems,research on solving APGDs still cannot discover implicit geometry knowledge for solving APGDs,which limits their ability to effectively solve problems.In this study,a systematic and modular three-phase scheme is proposed to design an algorithm for solving APGDs that involve textual and diagrammatic information.The three-phase scheme begins with the application of the statetransformer paradigm,modeling the problem-solving process and effectively representing the intermediate states and transformations during the process.Next,a generalized APGD-solving approach is introduced to effectively extract geometric knowledge from the problem’s textual descriptions and diagrams.Finally,a specific algorithm is designed focusing on diagram understanding,which utilizes the vectorized syntax-semantics model to extract basic geometric relations from the diagram.A method for generating derived relations,which are essential for solving APGDs,is also introduced.Experiments on real-world datasets,including geometry calculation problems and shaded area problems,demonstrate that the proposed diagram understanding method significantly improves problem-solving accuracy compared to methods relying solely on simple diagram parsing.展开更多
The forming limit diagram plays an important role in predicting the forming limit of sheet metals.Previous studies have shown that,the method to construct the forming limit diagram based on instability theory of the o...The forming limit diagram plays an important role in predicting the forming limit of sheet metals.Previous studies have shown that,the method to construct the forming limit diagram based on instability theory of the original shear failure criterion is efective and simple.The original shear instability criterion can accurately predict the left area of the forming limit diagram but not the right area.In this study,in order to improve the accuracy of the original shear failure criterion,a modifed shear failure criterion was proposed based on in-depth analysis of the original shear failure criterion.The detailed improvement strategies of the shear failure criterion and the complete calculation process are given.Based on the modifed shear failure criterion and diferent constitutive equations,the theoretical forming limit of TRIP780 steel and 5754O aluminum alloy sheet metals are calculated.By comparing the theoretical and experimental results,it is shown that proposed modifed shear failure criterion can predict the right area of forming limit more reasonably than the original shear failure criterion.The efect of the pre-strain and constitutive equation on the forming limits are also analyzed in depth.The modifed shear failure criterion proposed in this study provides an alternative and reliable method to predict forming limit of sheet metals.展开更多
As a payload support system deployed on satellites,the turntable system is often switched among different working modes during the on-orbit operation,which can experience great state changes.In each mode,the missions ...As a payload support system deployed on satellites,the turntable system is often switched among different working modes during the on-orbit operation,which can experience great state changes.In each mode,the missions to be completed are different,consecutive and non-over-lapping,from which the turntable system can be considered to be a phased-mission system(PMS).Reliability analysis for PMS has been widely studied.However,the system mode cycle characteristic has not been taken into account before.In this paper,reliability analysis method of the satellite turntable system is proposed considering its multiple operation modes and mode cycle characteristic.Firstly,the multi-valued decision diagrams(MDD)manipulation rules between two adjacent mission cycles are proposed.On this basis,MDD models for the turntable system in different states are established and the reliability is calculated using the continuous time Markov chains(CTMC)method.Finally,the comparative study is carried out to show the effectiveness of our proposed method.展开更多
Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing met...Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing methods assume that sufficient samples of each failure mode are available,which may be unrealistic,especially for those modes of low occurrence frequency but with high risk.To address this issue,this work proposes a novel fault diagnosis method that only requires the power signals generated under normal RPS operations in the training stage.Specifically,the failure modes of RPS are distinguished through constructing a reasoning diagram,whose nodes are either binary logic problems or those that can be decomposed into the problems of the binary logic.Then,an unsupervised method for the signal segmentation and a fault detection method are combined to make decisions for each binary logic problem.Based on the results of decisions,the diagnostic rules are established to identify the failure modes.Finally,the data collected from multiple real-world RPSs are used for validation and the results demonstrate that the proposed method outperforms the benchmark in identifying the faults of RPSs.展开更多
基金Supported by the National Natural Science Foundation of China（20776110） the Natural Science Foundation of Tianjin（06YFJMJC04100）
文摘Salt-forming regions for a complex salt-water system in non-equilibrium state of evaporation process are usually different from those in solubility diagrams.To understand the solid-forming region of NaCl and improve the utilization of bittern resources,experiments were carried out to evaporate 20 representative mixture solution samples of Na ^＋,Mg ^2＋ //Cl^-, SO4^2--H2O system with an average evaporation intensity of（1.4±0.4） g·L^-1 ·min^-1（water） at boiling temperature 348 K,and determine the NaCl solid-forming regions in non-equilibrium state.Because of the complexity of salt-forming region,a maximal region and a minimal region were proposed to express the non-equilibrium state salt-forming region with different crystal seed,and a conditional salt-forming region was proposed to present the characteristic region of non-equilibrium salt-forming phase diagram.The areas of the maximal and minimal regions are 2.00 and 1.56 times those in solubility diagram,so it is possible to utilize bittern resources in high efficiency.The recovery rates of NaCl were 99.65%,93.14%,88.57%,72.76%,and 83.68%for six typical bittern sources from Tulantai Salt Lake（China）,Dongtai Salt Lake（China） ,Jilantai Salt Lake（China）,Qarun Salt Lake（Egypt） and seawater,respectively.It is testified that the non-equilibrium state salt-forming phase diagram can be used in industrial processes.
基金the National Natural Science Foundation of China(Grant No.12004049).
文摘We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find that anomalous Floquet topological phases exist in the system.Focusing on examining the quench dynamics among topological phases,we analyze the site distribution of the 0-mode and p-mode edge states in long-period evolution after a quench.The results demonstrate that,under certain conditions,the site distribution of the 0-mode can be confined at the edge even in long-period evolution.Additionally,both the 0-mode and p-mode can recover and become confined at the edge in long-period evolution when the post-quench parameters(T,M_(2) /M_(1))in the phase diagram cross away from the phase boundary (M_(2)/ M_(1))=(6√3t2)/ (M_(1)−1.Furthermore,we conclude that whether the edge state is confined at the edge in the long-period evolution after a quench depends on the similarity of the edge states before and after the quench.Our findings reveal some new characteristics of quench dynamics in a periodically driven system.
基金financed from the grant of the Fundamental Research Funds for the Central Public Welfare Research Institutes(ZZ-2023001)。
文摘From the early Taoist diagrams of the human body to the end of the Qing dynasty and the beginning of the Republic of China,Taoists exaggerated and deformed the human spine in a shape-shifting manner.It is likely that medical practitioners were influenced by this style of representation,and there are also numerous diagrams of the human body with the curved spine in the lateral-view diagrams of viscera and Ming Tang Tu(明堂图Acupuncture and Moxibustion Chart),which constantly show the human torso in an elliptical“egg shape”.No later than the Ming dynasty,medical practitioners began to depict the actual physiological spinal curve of the human body.By the Qing dynasty,the depiction of the spinal curve in medical diagrams of the human figure showed a tendency to part ways with the Taoist freehand style of the previous generation.Although the representation of the curve of the spine was very crude,later medical images of the human body at least gradually straightened the spine and no longer depicted it in a shape-shifting manner.However,the curved spine in Taoist diagrams of the human body continued to exist,and the presentation of the curved spine never changed.This way of depicting its appearance,which is very different from reality,is shaped by Taoism's special way of perceiving and viewing the body,and may also contain another form of truth.
文摘The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.
基金supported by Orient Resources Ltd.College of Earth Sciences,Jilin University。
文摘The Dashuigou tellurium deposit is the world’s only known independent tellurium deposit.By restoring metamorphic rocks’protolith,we seek to understand not only the development and evolution trajectory of the region but also the origin of the relevant deposits.While there are many ways to restore metamorphic rocks’protolith,we take the host metamorphic rocks of Dashuigou tellurium deposit and leverage various petrochemical eigenvalues and related diagrams previously proposed to reveal the deposit’s host metamorphic rocks’protolith.The petrochemical eigenvalues include molecular number,Niggli’s value,REE parity ratio,CaO/Al_(2)O_(3)ratio,Fe^(3+) /(Fe^(3+) -+Fe^(2+) )ratio,chondrite-normalized REE value,logarithmic REE value,various REE eigenvalues including scandium,Eu/Sm ratio,total REE amount,light and heavy REEs,δEu,Eu anomaly,Sm/Nd ratio,and silicon isotope δ^(30) SiNBS-29‰,etc.The petrochemical plots include ACMs,100 mg-c-(al+alk),SiO_(2)-(Na_(2)O+K_(2)O),(al+fm)-(c+alk)versus Si,FeO+Fe_(2)O^(3+) TiO)-Al_(2)O_(3)-MgO,c-mg,Al_(2)O_(3)-(Na_(2)O+K_(2)O),chondrite-normalized REE model,La/Yb-REE,and Sm/Nd ratio,etc.On the basis of these comprehensive analyses,the following conclusions are drawn,starting from the many mantle-derived types of basalt developed in the study area of different geological ages,combined with the previously published research results on the deposit s fluid inclusions and sulfur and lead isotopes.The deposit is formed by mantle degassing in the form of a mantle plume in the late Yanshanian orogeny.The degassed fluids are rich in nano-sc ale substances including Fe,Te,S,As,Bi,Au,Se,H_(2),CO_(2),N_(2),H_(2)O,and CH_(4),which are enriched by nano-effect,and then rise to a certain part of the crust in the form of mantle plume along the lithospheric fault to form the deposit.The ultimate power for tellurium mineralization was from H_(2)flow with high energy,which was produced through radiation from the melted iron of the Earth’s outer core.The H,flow results in the Earth’s degassing,as well as the mantle and crust’s uplift.
基金supported by the National Natural Science Foundation of China(No.61977029)the Fundamental Research Funds for the Central Universities,CCNU(No.3110120001).
文摘Solving Algebraic Problems with Geometry Diagrams(APGDs)poses a significant challenge in artificial intelligence due to the complex and diverse geometric relations among geometric objects.Problems typically involve both textual descriptions and geometry diagrams,requiring a joint understanding of these modalities.Although considerable progress has been made in solving math word problems,research on solving APGDs still cannot discover implicit geometry knowledge for solving APGDs,which limits their ability to effectively solve problems.In this study,a systematic and modular three-phase scheme is proposed to design an algorithm for solving APGDs that involve textual and diagrammatic information.The three-phase scheme begins with the application of the statetransformer paradigm,modeling the problem-solving process and effectively representing the intermediate states and transformations during the process.Next,a generalized APGD-solving approach is introduced to effectively extract geometric knowledge from the problem’s textual descriptions and diagrams.Finally,a specific algorithm is designed focusing on diagram understanding,which utilizes the vectorized syntax-semantics model to extract basic geometric relations from the diagram.A method for generating derived relations,which are essential for solving APGDs,is also introduced.Experiments on real-world datasets,including geometry calculation problems and shaded area problems,demonstrate that the proposed diagram understanding method significantly improves problem-solving accuracy compared to methods relying solely on simple diagram parsing.
基金Supported by R&D Program of Beijing Municipal Education Commission of China(Grant No.KZ200010009041)Beijing Municipal University Youth Top Talents Training Program of China(Grant No.CIT&TCD201704014)Natural Science Foundation of China(Grant No.51475003).
文摘The forming limit diagram plays an important role in predicting the forming limit of sheet metals.Previous studies have shown that,the method to construct the forming limit diagram based on instability theory of the original shear failure criterion is efective and simple.The original shear instability criterion can accurately predict the left area of the forming limit diagram but not the right area.In this study,in order to improve the accuracy of the original shear failure criterion,a modifed shear failure criterion was proposed based on in-depth analysis of the original shear failure criterion.The detailed improvement strategies of the shear failure criterion and the complete calculation process are given.Based on the modifed shear failure criterion and diferent constitutive equations,the theoretical forming limit of TRIP780 steel and 5754O aluminum alloy sheet metals are calculated.By comparing the theoretical and experimental results,it is shown that proposed modifed shear failure criterion can predict the right area of forming limit more reasonably than the original shear failure criterion.The efect of the pre-strain and constitutive equation on the forming limits are also analyzed in depth.The modifed shear failure criterion proposed in this study provides an alternative and reliable method to predict forming limit of sheet metals.
基金co-supported by the Natural Science Foundation of China(No.61833016)the Shaanxi Out-standing Youth Science Foundation(No.2020JC-34)+1 种基金the Shaanxi Science and Technology Innovation Team(No.2022TD-24)the Natural Science Foundation of Heilongjiang Province of China(No.LH2021F038).
文摘As a payload support system deployed on satellites,the turntable system is often switched among different working modes during the on-orbit operation,which can experience great state changes.In each mode,the missions to be completed are different,consecutive and non-over-lapping,from which the turntable system can be considered to be a phased-mission system(PMS).Reliability analysis for PMS has been widely studied.However,the system mode cycle characteristic has not been taken into account before.In this paper,reliability analysis method of the satellite turntable system is proposed considering its multiple operation modes and mode cycle characteristic.Firstly,the multi-valued decision diagrams(MDD)manipulation rules between two adjacent mission cycles are proposed.On this basis,MDD models for the turntable system in different states are established and the reliability is calculated using the continuous time Markov chains(CTMC)method.Finally,the comparative study is carried out to show the effectiveness of our proposed method.
基金supported by National Key R&D Program of China(2022YFB2602203)Talent Fund of Beijing Jiaotong University(2021RC274,I22L00131)National Natural Science Foundation of China(U1934219,52202392,52022010,U22A2046,52172322,62271486,62120106011,52172323)。
文摘Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing methods assume that sufficient samples of each failure mode are available,which may be unrealistic,especially for those modes of low occurrence frequency but with high risk.To address this issue,this work proposes a novel fault diagnosis method that only requires the power signals generated under normal RPS operations in the training stage.Specifically,the failure modes of RPS are distinguished through constructing a reasoning diagram,whose nodes are either binary logic problems or those that can be decomposed into the problems of the binary logic.Then,an unsupervised method for the signal segmentation and a fault detection method are combined to make decisions for each binary logic problem.Based on the results of decisions,the diagnostic rules are established to identify the failure modes.Finally,the data collected from multiple real-world RPSs are used for validation and the results demonstrate that the proposed method outperforms the benchmark in identifying the faults of RPSs.
文摘针对现有基于数据驱动的随机子空间(data-driven stochastic subspace identification,DATA-SSI)算法存在的不足,无法实现稳定图中真假模态的智能化筛选,提出了一种新的模态参数智能化识别算法。首先通过引入滑窗技术来实现对输入信号的合理划分,以避免虚假模态和模态遗漏现象的出现;其次通过引入OPTICS(ordering points to identify the clustering structure)密度聚类算法实现稳定图中真实模态的智能化筛选,最后将所提算法运用于某实际大型斜拉桥主梁结构的频率和模态振型识别过程中。结果表明,所提改进算法识别的频率值结果与理论值(MIDAS有限元结果)以及实际值(现场动力特性实测结果)间的误差均在5%以内,且识别的模态振型图与理论模态振型图具有很高的相似性。
