A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and aci...A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and acid treatment revealed that the outer layer of the fiber is composed of nano-polycrystalline diamond.EDS,XPS,XRD and Raman spectrum analysis further identified that the fiber is composed of MWCNTs in the inner part and nano-polycrystalline diamond in the out layer.It is proposed that the untransformed MWCNTs may act as a template for the regrown outer layer of nano diamond fiber under high pressure and high temperature.展开更多
A new type of sintered diamond reinforced by diamond MWCNTs composite fibers which were randomly orientated and even distributed in the diamond matrix was synthesized by using 3wt%mullti-walled carbon nanotubes（MWCNT...A new type of sintered diamond reinforced by diamond MWCNTs composite fibers which were randomly orientated and even distributed in the diamond matrix was synthesized by using 3wt%mullti-walled carbon nanotubes（MWCNTs） as starting additive under high pressure of 5.8 GPa at temperature of 1500℃for 1 min.A special polycrystalline diamond structure of direct bonding of both diamond to diamond and diamond to diamond-MWCNTs composite fiber was observed.The testing results show that it possesses not only high hardness（49～52 GPa） and Young’s modulus（878 GPa） but also high bending strength（1320～1540 GPa） and fracture toughness(9.0～9.2 MPa·m<sup>1/2</sup>) as it was theoretically predicted.The high performances of the composite were contributed by the fiber strengthening effect and the special structure which can offer more extensive diamond to diamond bonding.展开更多
The separated silicon-vacancy （SiV） photoluminescent diamond particles were synthesized on a silica optical fiber by hot filament chemical vapor deposition （HFCVD）. The effects of the pre-treated method and chambe...The separated silicon-vacancy （SiV） photoluminescent diamond particles were synthesized on a silica optical fiber by hot filament chemical vapor deposition （HFCVD）. The effects of the pre-treated method and chamber pressure on the microstructure and photoluminescence of the diamond particles were investigated. The results show that the diamond particles are homogeneously distributed on the surface of the optical fiber. With the chamber pressure increasing from 1.6 kPa to 3.5 kPa, the shape of the particles transforms from flake to circle, while the diamond particles cannot be deposited on the fiber with the pressure further increased to 4.5 kPa. The samples synthesized under 2.5 kPa chamber pressure are composed of diamond particles with size around 200-400 nm, exhibiting stronger SiV photoluminescence with the width of around 6 nm.展开更多
The frictional resistance and machining quality when cutting carbon fiber reinforced plastics (CFRP) laminates are associated with tribological behavior of tool materials. In the present study, the tribological proper...The frictional resistance and machining quality when cutting carbon fiber reinforced plastics (CFRP) laminates are associated with tribological behavior of tool materials. In the present study, the tribological properties of three types of monolayer microcrystalline diamond (MCD) coatings, nanocrystalline diamond (NCD) coatings and dual-layer MCD/NCD coatings sliding against CFRP are investigated under dry lubricated conditions using the rotational friction tester. The coefficients of friction (COF), wear rate and worn surfaces of the contacted surfaces are analyzed for the MCD-CFRP, NCD-CFRP and MCD/NCD-CFRP contacting pairs. The results show that compared with the monolayer MCD and NCD, the bilayer of MCD/NCD coating displays the lowest COF with the value of ~0.13, it is 42% and 55% of the values for MCD and NCD coatings. Due to the rough surfaces of MCD, the wear debris of CFRP on MCD samples exhibits the plowing effect. While for the NCD and MCD/NCD samples, the wear fragments display the planar shapes. The wear rate of CFRP against MCD is more than twice that of CFRP against NCD, due to the excellent loading capacity. While the wear rate of CFRP against MCD/NCD is about twice than that of CFRP-NCD pairs. The bilayer of MCD/NCD combines the excellent advantages of high hardness of MCD and the smooth surface of NCD. It shows the broad application potential for the bilayer coatings.展开更多
基金Supported by the National Natural Science Foundation of China(No.50342017)by the Natural Science Foundation of Beijing(No.2042019)
文摘A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and acid treatment revealed that the outer layer of the fiber is composed of nano-polycrystalline diamond.EDS,XPS,XRD and Raman spectrum analysis further identified that the fiber is composed of MWCNTs in the inner part and nano-polycrystalline diamond in the out layer.It is proposed that the untransformed MWCNTs may act as a template for the regrown outer layer of nano diamond fiber under high pressure and high temperature.
基金Supported by the National Natural Science Foundation of China(No.50342017)by the Natural Science Foundation of Beijing(No.2042019)
文摘A new type of sintered diamond reinforced by diamond MWCNTs composite fibers which were randomly orientated and even distributed in the diamond matrix was synthesized by using 3wt%mullti-walled carbon nanotubes（MWCNTs） as starting additive under high pressure of 5.8 GPa at temperature of 1500℃for 1 min.A special polycrystalline diamond structure of direct bonding of both diamond to diamond and diamond to diamond-MWCNTs composite fiber was observed.The testing results show that it possesses not only high hardness（49～52 GPa） and Young’s modulus（878 GPa） but also high bending strength（1320～1540 GPa） and fracture toughness(9.0～9.2 MPa·m<sup>1/2</sup>) as it was theoretically predicted.The high performances of the composite were contributed by the fiber strengthening effect and the special structure which can offer more extensive diamond to diamond bonding.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.50972129 and 50602039)the International Science Technology Cooperation Program of China(Grant No.2014DFR51160)+2 种基金the National Key Research and Development Program of China(Grant No.2016YFE0133200)European Union’s Horizon 2020 Research and Innovation Staff Exchange(RISE)Scheme(Grant No.734578)the One Belt and One Road International Cooperation Project from Key Research and Development Program of Zhejiang Province,China(Grant No.2018C04021)
文摘The separated silicon-vacancy （SiV） photoluminescent diamond particles were synthesized on a silica optical fiber by hot filament chemical vapor deposition （HFCVD）. The effects of the pre-treated method and chamber pressure on the microstructure and photoluminescence of the diamond particles were investigated. The results show that the diamond particles are homogeneously distributed on the surface of the optical fiber. With the chamber pressure increasing from 1.6 kPa to 3.5 kPa, the shape of the particles transforms from flake to circle, while the diamond particles cannot be deposited on the fiber with the pressure further increased to 4.5 kPa. The samples synthesized under 2.5 kPa chamber pressure are composed of diamond particles with size around 200-400 nm, exhibiting stronger SiV photoluminescence with the width of around 6 nm.
文摘The frictional resistance and machining quality when cutting carbon fiber reinforced plastics (CFRP) laminates are associated with tribological behavior of tool materials. In the present study, the tribological properties of three types of monolayer microcrystalline diamond (MCD) coatings, nanocrystalline diamond (NCD) coatings and dual-layer MCD/NCD coatings sliding against CFRP are investigated under dry lubricated conditions using the rotational friction tester. The coefficients of friction (COF), wear rate and worn surfaces of the contacted surfaces are analyzed for the MCD-CFRP, NCD-CFRP and MCD/NCD-CFRP contacting pairs. The results show that compared with the monolayer MCD and NCD, the bilayer of MCD/NCD coating displays the lowest COF with the value of ~0.13, it is 42% and 55% of the values for MCD and NCD coatings. Due to the rough surfaces of MCD, the wear debris of CFRP on MCD samples exhibits the plowing effect. While for the NCD and MCD/NCD samples, the wear fragments display the planar shapes. The wear rate of CFRP against MCD is more than twice that of CFRP against NCD, due to the excellent loading capacity. While the wear rate of CFRP against MCD/NCD is about twice than that of CFRP-NCD pairs. The bilayer of MCD/NCD combines the excellent advantages of high hardness of MCD and the smooth surface of NCD. It shows the broad application potential for the bilayer coatings.
