Axial deep creep-feed grinding machining technology is a high efficiency process method of engineering ceramics materials, which is an original method to process the cylindrical ceramics materials or hole along its ax...Axial deep creep-feed grinding machining technology is a high efficiency process method of engineering ceramics materials, which is an original method to process the cylindrical ceramics materials or hole along its axis. The analysis of axial force and edge fracture proved the cutting thickness and feed rate could be more than 5-10 mm and 200 mm/min respectively in once process, and realized high efficiency, low-cost process of engineering ceramics materials. Compared with high speed-deep grinding machining, this method is also a high efficiency machining technology of engineering ceramics materials as well as with low cost. In addition, removal mechanism analyses showed that both median/radial cracks and lateral cracks appeared in the part to be removed, and the processed part is seldom destroyed, only by adjusting the axial force to control the length of transverse cracks.展开更多
Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al（Si）/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties o...Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al（Si）/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties of the composites were investigated.The mechanical properties are found to increase monotonically with Si content increasing up to 7.0 wt%.The Al-7.0 wt% Si/diamond composite exhibits tensile strength of 78 MPa,bending strength of 230 MPa,and compressive strength of426 MPa.Al–Si eutectic phases are shown to connect with Al matrix and diamond particles tightly,which is responsible for the enhancement of mechanical properties in the Al（Si）/diamond composites.展开更多
基金the National Natural Science Foundation of China(Nos.51075309 and 51275372)the Twelfth five-year National Defence Pre-research Projects(No.51318020210)Wuhan High-Tech Development Project Foundation(No.201110921299)
文摘Axial deep creep-feed grinding machining technology is a high efficiency process method of engineering ceramics materials, which is an original method to process the cylindrical ceramics materials or hole along its axis. The analysis of axial force and edge fracture proved the cutting thickness and feed rate could be more than 5-10 mm and 200 mm/min respectively in once process, and realized high efficiency, low-cost process of engineering ceramics materials. Compared with high speed-deep grinding machining, this method is also a high efficiency machining technology of engineering ceramics materials as well as with low cost. In addition, removal mechanism analyses showed that both median/radial cracks and lateral cracks appeared in the part to be removed, and the processed part is seldom destroyed, only by adjusting the axial force to control the length of transverse cracks.
基金financially supported by the National Natural Science Foundation of China (No.51271017)the Fundamental Research Funds for the Central Universities (No.FRFTP-13-033A)the Program for New Century Excellent Talents in University (No.NCET-10-0227)
文摘Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al（Si）/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties of the composites were investigated.The mechanical properties are found to increase monotonically with Si content increasing up to 7.0 wt%.The Al-7.0 wt% Si/diamond composite exhibits tensile strength of 78 MPa,bending strength of 230 MPa,and compressive strength of426 MPa.Al–Si eutectic phases are shown to connect with Al matrix and diamond particles tightly,which is responsible for the enhancement of mechanical properties in the Al（Si）/diamond composites.
