Theoretical modeling of cutting temperature in high-speed end milling process for die/mold machining

A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating under cutting and cooling under non-cutting. It shows that cutting speed and the tool-workpiece engagement condition are determinative for tool temperature in the operation. The suggested model was investigated by tests of AlTiN coated endmill machining hardened die steel JIS SKD61, where cutting temperature on the flank face of tool was measured with an optical fiber type radiation thermometer. Experimental results show that the tendency of cutting temperature to increase with cutting speed and engagement angle is intensified with the progressing tool wear.

Development of Flow Stress of AISI H13 Die Steel in Hard Machining

An approach was presented to characterize the stress response of workpiece in hard machining, accounting for the effect of the initial workpiece hardness in addition to temperature, strain and strain rate on flow stress in this paper. AISI H13 die steel was chosen to verify this methodology. The proposed flow stress model demonstrates a good agreement with experimental data. Therefore, the proposed model can be used to predict the corresponding flow stress-strain response ofAISl H13 die steel with variation of the initial workpiece hardness in hard machining.

Optimization strategy in end milling process for high speed machining of hardened die/mold steel

An optimization strategy for high speed machining of hardened die/mold steel based on machining feature analysis was studied. It is a further extension of the previously presented study on the thermal mechanism of end milling and constant cutting force control. An objective function concerning machining cost and associated optimization algorithm based on machining time and cutting length calculation was proposed. Constraints to satisfy specific machining strategies when high speed machining the hardened die/mold steel, trochoid tool path pattern in slot end milling to avoid over-heat and feed rate adaptation to avoid over-load, were also discussed. As a case study, the tool selection problem when machining a die part with multiple machining features was investigated.

A Tool Path Re-generation Algorithm for Die & Mold Machining

Facing the challenges of a shorter product design a nd manufacturing lead-time, many mold companies are using 3-D CAD/CAM software s ystems in design and manufacturing. A new product file is often issued to the mo ld design department before it is completely finalized and the design may have t o be iterated many times during the mold design and making processes. In practic e, if a mold has been modified, all the tool paths that cover the modified regio n must be re-generated, no matter how small the modified region may be. With th e available tool path generation systems, if a tool path needs to be re-generat ed, all the cutter location (CL) points must be re-calculated, and none of the original CL points can be re-used. It would require as much time to re-gen erate the modified tool path as in the original case. On the other hand, the mod ified region is usually quite small compared with the entire mold. The complete re-generation process is therefore highly unproductive and time-consuming. This paper proposes an efficient tool path re-generation approach for 3-axis d ie and mold machining. It is assumed in this research that a gouge-free too l path has been generated for the original mold and the same ball end-mill is to be used to generate the tool path for the modified mold. It is shown in th is work that if the boundary of the modified region is interference-free, the a ffected CL points are enclosed by a set of CL points which correspond to the poi nts on the boundary of the modified region. An efficient tool path re-generatio n algorithm was developed in this research. With this algorithm, a closed CL cur ve is first generated from the boundary of the affected region. The CL points fo r the original mold are then analyzed by comparing the x and y values with the b oundary of the affected CL points. If the CL points are not affected by the modi fication, they are output to the new CL file directly. Otherwise, they are remov ed and replaced by the new CL points. The algorithm has been tested using severa l industrial parts, and results show that it is efficient, robust, and the re-g enerated tool path is gouge-free and smooth.

Development of Online Machining and Measurement System in Die and Mold Manufacturing： Concept and Fundamental Experiments

The corrective machining to compensate the resulting errors is usually tried at plural times based on the trial-and-error process when the machining is realized in die and mold manufacturing. This corrective machining has an influence on accuracy and efficiency and is an important factor. The measurement system for measuring the forms of die and mold at all times is essential in order to machine the die and mold with high accuracy and efficiency. However, the problems of management and operation errors are found in compensating process of die and mold machining. In this paper, an online machining and measurement system in die and mold manufacturing is developed in order to overcome these problems. In this online system, 2-axis control system is added to a surface roughness measuring instrument, and both NC machining program and measured data are linked and controlled using a same computer. Therefore, the machining and measurement can be recognized for consistent process, and can be realized on the machine. This system has the advantages such as the high accuracy, low-price, and online convenience and so on. The possibility of practical use of this online system was investigated by fundamental experiments.

New Model Die Set for PET Plastic Jet-Moulding Machine

At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracted the attention of numerous domestic and foreign clients. They rushed to the stand in great numbers for consultation and talks on ordering. According to the evaluation of the experts concerned, the die set is the most advanced one nationwide for PET plastic jet-moulding machinery.

Heat Treat ment of Die and Mould Oriented Concurrent Design

Many disadvantages exist in the traditional die design method which belongs to serial pattern. It is well known that heat treatment is highly important to the dies. A new idea of concurrent design for heat treatment process of die and mould was developed in order to overcome the existent shortcomings of heat treatment process. Heat treatment CAD/CAE was integrated with concurrent circumstance and the relevant model was built. These investigations can remarkably improve efficiency, reduce cost and ensure quality of R and D for products.

New trends in cold-chamber die casting machine design

Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the automotive industry,apart from the traditional elements produced by the die pressure method such as engine blocks or crank shaft bedplates,aluminium is displacing steel from structural parts of cars('body in white').The current state and development directions of the structural solutions of cold-chamber die castings are analysed in this paper.These solutions drive the prospective development of these machines and die casting technology.The focus is mainly on essential functional systems such as:hydraulic drives of closing and locking units,as well as pressing in die machines of known companies present on the European market.

A Case Study of Heat Transfer from Hot Runner Mould to the Fix Platen of the Injection-moulding Machine

In an injection moulding process, the parallelism b et ween the tie bars of the injection moulding machine is very important as it will affect the mould closing and clamping system. In recent years, more and more ho t runner systems are being applied in the moulding industry to save material and decrease the losses of injection pressure. Heat transfer from hot runner system from the fixed half which is secured in the fix machine platen could transmit s o much heat that it may cause high temperature differential between the machine fix platen and moving platen. This will cause the tie bar to become unparallel. Part quality will be compromised and the wear of the tie bar will be excessive. Overhaul of the tie bar may be necessary after a short period of time which is c ostly. This raises the need to analyze the heat transfer from the hot runner sys tem to the machine fix platen and the methods of isolating or minimizing the hea t transfer. In this case study, a photo lens article mould was used. The mould w as built with a direct hot runner nozzle system. Heat conduction from hot runner and machine screw to machine fix platen were studied based on either using high temperature heat insulating plate put in placed between the mould and the mould ing machine fix platen or drill cooling channels in the front mould clamping pla te. The high temperature insulator is very costly as it is made out of glass re inforced polymer composite material. Experimental results were obtained and anal yzed to find the best method to minimize the unwanted heat transfer using the ch eapest and most effective method.

DIE&MOULD CHINA2002精品荟萃

我国模具制造业的快速发展使得我国模具市场成为国内外著名模具制造商和模具加工设备制造商眼中的一块肥肉 ,也促使了中国国际模具技术和设备展览会规模一届比一届大 ,水平一届比一届高。今年 5月 10～ 14日在上海新国际博览中心举办的第 9届中国国际模具技术和设备展览会在参展单位、展出规模、展商和展品档次等各个方面都是历届模展中最大和最高的一次。文章根据记者在DIE&MOULDCHINA 2 0 0 2上的所见所闻 ,从众多的展品中挑选出一些水平高、代表性强的加工机床及相关设备加以介绍 。

Mould filling ability and microstructure of aluminum alloy under electromagnetic die casting

In order to solve the mould filling problem of large thin walled aluminum alloy castings effectively, a new casting technology called electromagnetic die casting has been developed. Emphasis has laid on studying the mould filling ability and microstructure under the mentioned method. The results show that the mould filling ability of A357 is increasing continually with the increasing of the input voltage, that is, the magnetic induction intensity. The pressure head of the molten metal increases from the lowest one at the input of the mould to the highest one at the end of the mould while in a conventional mould the pressure head depends invariably on the sprue height. Under electromagnetic die casting, the grains of A357 alloy are refined, and the pattern of eutectic silicon of alloy changes from rough plate to smooth strip.

Hardening Effect on Machined Surface for Precise Hard Cutting Process with Consideration of Tool Wear

During hard cutting process there is severe thermodynamic coupling effect between cutting tool and workpiece, which causes quenching effect on finished surfaces under certain conditions. However, material phase transformation mechanism of heat treatment in cutting process is different from the one in traditional process, which leads to changes of the formation mechanism of damaged layer on machined workpiece surface. This paper researches on the generation mechanism of damaged layer on machined surface in the process of PCBN tool hard cutting hardened steel Cr12MoV. Rules of temperature change on machined surface and subsurface are got by means of finite element simulation. In phase transformation temperature experiments rapid transformation instrument is employed, and the effect of quenching under cutting conditions on generation of damaged layer is revealed. Based on that, the phase transformation points of temperature under cutting conditions are determined. By experiment, the effects of cutting speed and tool wear on white layer thickness in damaged layer are revealed. The temperature distribution law of third deformation zone is got by establishing the numerical prediction model, and thickness of white layer in damaged layer is predicted, taking the tool wear effect into consideration. The experimental results show that the model prediction is accurate, and the establishment of prediction model provides a reference for wise selection of parameters in precise hard cutting process. For the machining process with high demanding on surface integrity, the generation of damaged layer on machined surface can be controlled precisely by using the prediction model.

HSM strategy study for hardened die and mold steels manufacturing based on the mechanical and thermal load reduction strategy

The paper discussed cutter-work engagement situation hidden behind the mechanical and thermal load effect on cutting edges during high speed hard machining process. The engagement situation was investigated in great detail using experimental and geometrical analytic measures. Experiments were conducted using A1TiN-coated micro-grain carbide end mill cutters to cut hardened die steel. On the basis, a general high speed hard machining strategy, which aimed at eliminating excessive engagement situation during high-speed machining （HSM） hard machining, was proposed. The strategy includes the procedures to identify prone-to-overload areas where excessive engagement situation occurs and then to create a reliable tool path, which has the effect of cutting load reduction to remove the prone-to-overload areas.

Survey of the 4th China International Diecasting Exhibition

Die casting machines, dies, die castings, peripheral equipments, die lubricants, raw materials for die casting, melting & holding furnaces, cleaning equipments, etc. were exhibited during the 4th China International Die Casting Exhibition, which was surveyed in the paper.

Thin-Wall Aluminum Die-Casting Technology for Development of Notebook Computer Housing

Silicon-based aluminum casting alloys are known to be one of the most widely used alloy systems mainly due to their superior casting characteristics and unique combination of mechanical and physical properties. However,manufacturing of thin-walled aluminum die-casting components,less than 1.0 mm in thickness,is generally known to be very difficult task to achieve aluminum casting alloys with high fluidity.Therefore,in this study,the optimal die-casting conditions for producing 297 mm×210 mm×0.7 mm thin-walled aluminum component was examined experimentally by using 2 different gating systems,tangential and split type,and vent design.Furthermore,computational solidification simulation was also conducted.The results showed that split type gating system was preferable gating design than tangential type gating system at the point of view of soundness of casting and distortion generated after solidification.It was also found that proper vent design was one of the most important factors for producing thin-wall casting components because it was important for the fulfillment of the thin-wall cavity and the minimization of the casting distortion.

Technique of pulse electrochemical finishing in molds and dies

Surface finishing is one of the most important processes in mould and die making. This process is necessary not only for smoothing the surface of die or mould, but also for removing the surface layer, which has been damaged by the preceding machining process and finally improve the performances and lifetime of moulds to a large extent. It has been reported that between 30% and 40% of the total time required to manufacture a die or mold is spent on finishing operations, most of which are performed by skilled workers employing traditional techniques. At present, key problems in mould and die finishing technology can improve the finishing efficiency, consistency and quality at reduced costs. A new and high efficiency unconventional finishing technology, pulse electrochemical finishing was introduced. Experiments were done in neutral nitrate electrolytes. The influence of electrolyte composition, intereletrode gap, finishing time, flow quality, current density, compositions of steel materials and pulse parameters on the resulting surface finishing was investigated. Results indicate that pulse parameters have important influence on operations finishing and the proper selection of pulse parameters can lead to both good smoothing efficiency and surface quality at low costs.

Design, Fabrication and Experimentation of a Deep Drawing Machine

This paper presents the work implemented in designing, fabricating and operating a model of a cheap hydraulic DDM （deep drawing machine）, which is currently utilized in the manufacturing processes lab in the IED （Industrial Engineering Department） at An-Najah National University. The machine is used to conduct different experiments related to the deep drawing process. This work was implemented in three stages： the first was the design stage, in which all design calculations of the DDM elements were completed based on the specifications of the product （cup） to be drawn; the second was the construction stage, in which the DDM elements were fabricated and assembled at the engineering workshops of the university; the last was the operating and experimentation stage, in which the DDM was tested by conducting different experiments. The experience gained from designing and constructing such a mechanical lab equipment was found to be successful in terms of obtaining practical results that agree with those available in literature, cost-effective relative to the cost of a similar purchased equipment, as well as enhancing students＇ abilities in understanding the deep drawing process in particular and machine elements design concepts in general.

圆弧抽芯注塑模具优化设计

基于圆弧抽芯注塑模具,根据塑件结构及材料性能特点,对浇口的位置及结构进行了优化设计,通过CAE模拟分析得到位于填充末端、最大壁厚处的塑件最大变形量为0.739 mm,变形量在设计允许范围内。以油缸作为驱动动力源,通过齿条驱动齿轮、内齿轮旋转,实现抽芯动作;将内齿轮设计为异形非标齿轮,减少了所占空间,实现了1模2腔布局。为解决圆弧型芯冷却水路难以加工的问题,设计的加工工序为先按照直型芯进行粗加工,钻孔加工型芯冷却水路,然后,将型芯加热弯曲为所需形状,并进行调质处理,最后对型芯进行精加工使其满足设计要求,达到了随形冷却效果。传动机构关键参数采用理论计算与CAE模拟分析相结合的法验证,测试结果表明,计算校核效率提高了约4倍。

相空间重构与改进SMA优化SVR的网络流量预测

为提高网络流量预测精度,提出结合相空间重构与改进黏菌优化支持向量回归的预测模型。为解决黏菌算法收敛慢、易得局部最优的不足,引入3种形态对立学习对种群进行初始化,提高种群多样性;利用非线性反馈因子更新机制,均衡全局搜索与局部开发;设计柯西-高斯混合变异对最优解变异,扩展搜索空间,避免陷入局部最优。利用改进黏菌算法对支持向量回归优化调参,有效解决超参初值敏感缺陷,提高学习精度和收敛速度,以此构建网络流量预测模型。实验结果表明,改进模型预测误差更小,能够实现高精度和实时性预测要求。