A hybrid of ensemble empirical mode decomposition and empirical mode decomposition (EEMD-EMD) is introduced to diagnose the valve-slap vibration signal,which is relative to the dominant combustion knock vibration sign...A hybrid of ensemble empirical mode decomposition and empirical mode decomposition (EEMD-EMD) is introduced to diagnose the valve-slap vibration signal,which is relative to the dominant combustion knock vibration signal given out by a diesel engine around the top dead center (TDC).The time-frequency representations of intrinsic mode functions (IMFs) decomposed by EEMD-EMD are obtained by adaptive generalized S transform (AGST).A type 493 diesel engine was used for the experiment,and the result indicates that the valve-slap of the diesel engine is serious,and the vibration frequencies are higher than the combustion knock.With EEMD-EMD-AGST approach,the valve-slap can be identified by the vibration analysis of the diesel engine.展开更多
A new method using Ozone to improve fuel combustion resulting in fuel saving and pollution reduction for diesel engine has been put forward in this paper. The method features non destructive fuel saving and anti-knoc...A new method using Ozone to improve fuel combustion resulting in fuel saving and pollution reduction for diesel engine has been put forward in this paper. The method features non destructive fuel saving and anti-knock nature improvement. The experiment shows that, compared with those of the original engine, the fuel saving rate is up to 1.7%-3.3%, and the exhaust pollution reduction rate is 3.0%-6.8, thus may lead to a good comprehensive benefit in economic, social and ecological aspects.展开更多
活塞敲击噪声是柴油机最重要的机械噪声,控制敲击噪声一般可以从源、传递途径以及表面辐射3方面考虑,其中控制源效果最佳。基于活塞2阶运动理论建立活塞运动动力学方程,计算得到活塞与缸套间隙别为0.5 mm、1.0 mm和1.5 mm 3种工况下的...活塞敲击噪声是柴油机最重要的机械噪声,控制敲击噪声一般可以从源、传递途径以及表面辐射3方面考虑,其中控制源效果最佳。基于活塞2阶运动理论建立活塞运动动力学方程,计算得到活塞与缸套间隙别为0.5 mm、1.0 mm和1.5 mm 3种工况下的活塞与缸套4个接触点位置的载荷力。建立柴油机有限元模型,基于时域方法,计算柴油机表面的振动与噪声特性,预测机体的表面辐射声压。研究了活塞与气缸间隙对柴油机活塞敲击噪声的影响,得到机体振动与声学特性的变化情况,结果表明,通过采取减小活塞与缸套间隙的方法,可使柴油机的活塞敲击噪声得到一定的控制。展开更多
基金Supported by National Key Technology Research and Development Program of China (No.2011BAE22B05)
文摘A hybrid of ensemble empirical mode decomposition and empirical mode decomposition (EEMD-EMD) is introduced to diagnose the valve-slap vibration signal,which is relative to the dominant combustion knock vibration signal given out by a diesel engine around the top dead center (TDC).The time-frequency representations of intrinsic mode functions (IMFs) decomposed by EEMD-EMD are obtained by adaptive generalized S transform (AGST).A type 493 diesel engine was used for the experiment,and the result indicates that the valve-slap of the diesel engine is serious,and the vibration frequencies are higher than the combustion knock.With EEMD-EMD-AGST approach,the valve-slap can be identified by the vibration analysis of the diesel engine.
文摘A new method using Ozone to improve fuel combustion resulting in fuel saving and pollution reduction for diesel engine has been put forward in this paper. The method features non destructive fuel saving and anti-knock nature improvement. The experiment shows that, compared with those of the original engine, the fuel saving rate is up to 1.7%-3.3%, and the exhaust pollution reduction rate is 3.0%-6.8, thus may lead to a good comprehensive benefit in economic, social and ecological aspects.
文摘活塞敲击噪声是柴油机最重要的机械噪声,控制敲击噪声一般可以从源、传递途径以及表面辐射3方面考虑,其中控制源效果最佳。基于活塞2阶运动理论建立活塞运动动力学方程,计算得到活塞与缸套间隙别为0.5 mm、1.0 mm和1.5 mm 3种工况下的活塞与缸套4个接触点位置的载荷力。建立柴油机有限元模型,基于时域方法,计算柴油机表面的振动与噪声特性,预测机体的表面辐射声压。研究了活塞与气缸间隙对柴油机活塞敲击噪声的影响,得到机体振动与声学特性的变化情况,结果表明,通过采取减小活塞与缸套间隙的方法,可使柴油机的活塞敲击噪声得到一定的控制。
基金Project(2018JJ2041)supported by the Science and Technology Project in Hunan Province,ChinaProject(szjj2019-008)supported by the Open Research Subject of Key Laboratory of Fluid and Power Machinery,Ministry of Education,China。
