Taking wall-flow diesel particulate filter(DPF) as the research objective and separately assuming its filtering wall to be composed of numerous spherical or cylindrical elements, two different mathematical models of s...Taking wall-flow diesel particulate filter(DPF) as the research objective and separately assuming its filtering wall to be composed of numerous spherical or cylindrical elements, two different mathematical models of steady filtration for wall-flow diesel particulate filter were developed and verified by experiments as well as numerically solved. Furthermore, the effects of the macroand micro-structural parameters of filtering wall and exhaust-flow characteristic parameters on trapping efficiency were also analyzed and researched. The results show that: 1) The two developed mathematical models are consistent with the prediction of variation of particulate size; the influence of various factors on the steady trapping efficiency is exactly the same. Compared to model 2, model 1 is more suitable for describing the steady filtration process of wall-flow diesel particulate filter; 2)The major influencing factors on steady trapping efficiency of wall-flow diesel particulate filter are the macro-and micro-structural parameters of filtering wall; and the secondary influencing factors are the exhaust-flow characteristic parameters and macro-structural parameters of filter; 3)The steady trapping efficiency will be improved by increasing filter body volume, pore density as well as wall thickness and by decreasing exhaust-flow, but effects will be weakened when particulate size exceeds a certain critical value; 4) The steady trapping efficiency will be significantly improved by increasing exhaust-flow temperature and filtering wall thickness, but effects will be also weakened when particulate size exceeds a certain critical value; 5) The steady trapping efficiency will approximately linearly increase with reducing porosity, micropore aperture and pore width.展开更多
Diesel powered vehicles, in compliance with the more strict exhaust emission standards such as Euro V, is likely to require a diesel particulate filter （DPF）. A DPF used on a vehicle will affect the acoustic emissio...Diesel powered vehicles, in compliance with the more strict exhaust emission standards such as Euro V, is likely to require a diesel particulate filter （DPF）. A DPF used on a vehicle will affect the acoustic emission of the diesel engine, so it is important to investigate the sound propagation rule in DPF and further to propose the optimum DPF design. However, due to the geometrical complexity of the DPF, the traditional analysis method, such as analytical method, can not assess the acoustic performance of DPF accurately in medium and high frequency band. In this paper, a combined approach of finite element analysis and viscosity correction is proposed to predict acoustic performance of DPF. A simplified model of the full DPF is established and is used to analyze the sound propagation characteristic of the DPF. The distribution of the sound pressure and velocity, the transmission matrix of the DPF are obtained using the finite element method. In addition, the method of the viscosity correction is used in the transmission matrix of the DPF to evaluate the acoustic performance of DPF. Based on the FEM computation and the viscosity correction, the transmission losses under the rated load and idle condition of a diesel engine are calculated. The calculation results show that DPF can effectively attenuate exhaust noise, and sound attenuation increase with the rise of the frequency. Sound attenuation is better under rated condition than idle condition of diesel engine, particularly in frequency above 1 000 Hz.展开更多
To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter(DPF),a self-designed packed-bed dielectric barrier discharge(DBD)reactor for DPF regeneration was developed...To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter(DPF),a self-designed packed-bed dielectric barrier discharge(DBD)reactor for DPF regeneration was developed.The DBD reactor with the main active substance of nonthermal plasma(NTP)as the target parameter was optimized by adjusting the feed gas,packing particles(material or size),and cooling water temperature.Moreover,a set of optimal working parameters(gas source,O_2;packing particles,1.2–1.4 mm ZrO_(2);and cooling water temperature,20℃)was selected to evaluate the effect of different O_(3) concentrations on DPF regeneration.The research results showed that selecting packing particles with high dielectric constant and large particles,as well as reducing the cooling water temperature,with oxygen as the feed gas,contributed to an increase in O_(3) concentration.During DPF regeneration,the following changes were observed:the power of the NTP reactor decreased to lower than 100 W,the O_(3) concentration increased from 15 g m^(-3) to 45 g m^(-3),the CO and CO_2 volume fractions of the particulate matter decomposition products increased,and the peak regeneration temperature increased to 173.4℃.The peak temperature arrival time was 60 min earlier,indicating that the regeneration rate of DPF increased with the increase in O_(3) concentration.However,the O_(3) utilization rate(the amount of carbon deposit removed per unit volume O_(3))initially increased and then decreased;when the O_(3) concentration was set to 25 g m^(-3),the highest O_(3) utilization rate was reached.The packed-bed DBD technology contributed to the increase in the concentration of NTP active substances and the regeneration efficiency of DPF.It provides a theoretical and experimental basis for high-efficiency regeneration of DPF at low temperatures(<200℃).展开更多
Numerical simulation has been carried out to investigate the major factors affecting the time of composite regeneration due to coupling cerium-based additive and microwave for diesel particulate f3ilter(DPF). Effect o...Numerical simulation has been carried out to investigate the major factors affecting the time of composite regeneration due to coupling cerium-based additive and microwave for diesel particulate f3ilter(DPF). Effect on the composite regeneration time from various factors such as mass flow rate of exhaust gas, temperature of exhaust gas, oxygen concentration of exhaust gas, microwave power and amount of cerium-based additive are investigated. And a mathematical model based on fuzzy least squares support vector machines has been developed to forecast the endpoint of the composite regeneration. The results show that the relative error of endpoint forecasting model of composite regeneration is less than 3.5%, and the oxygen concentration of exhaust gas has the biggest effect on the endpoint of composite regeneration, followed by the mass flow rate of exhaust gas, the microwave power, the temperature of exhaust gas and the amount of cerium-based additive.展开更多
An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of ...An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of trapped particulate matter(PM)were conducted.The concentrations of the PM decomposition products(CO,)and the internal temperature of the DPF were monitored to determine the performance of DPF regeneration and thermal safety of the NTP technology.The results showed that the concentrations of CO and CO2and the mass of P.V1 decomposition increased with the increase in the amount of captured PM,whereas the concentration of the NTP active substance(O,)escaping from the DPF decreased under the same working conditions of the NTP injection system.A higher amount of captured PM promoted the oxidative decomposition reaction between NTP and PM and improved the utilization rate of the NTP active substances.The peak temperature at the same measuring point inside the DPF generally increased and the phases of the peak temperature were delayed as the amount of captured PM increased.The temperature peaks and temperature gradients during the DPF regeneration process were far lower than llie failure limit value,which indicates that NTP regeneration technology has good thermal durability and increases the service life of the DPF.展开更多
Numerical simulations are performed both for the single airflow and air-PMtwo-phase flow in wall flow diesel participate filters (DPF) for the first time. The calculationdomain is divided into two regions. In. the inl...Numerical simulations are performed both for the single airflow and air-PMtwo-phase flow in wall flow diesel participate filters (DPF) for the first time. The calculationdomain is divided into two regions. In. the inlet and outlet flow channels, the simulations areperformed for the steady and laminar flow; In the porous filtration walls, the calculation model forflow in porous media is used. The Lagrange two-phase flow model is used to calculate the air-PMflow in DPF, for the dispersed phase (PM), its flow tracks are obtained by the integrating of theLagrange kinetic equation. The calculated velocity, pressure distribution and PM flow tracks in DPFare obtained, which exhibits the main flow characteristics in wall flow DPF and will be help for theoptimal design and performance prediction of wall flow DPF.展开更多
Diesel particulate filter(DPF)is a leading technology reducing particle emissions from marine diesel engines.The removal or regeneration of soot in DPF is an important issue.The purpose of this study is to provide som...Diesel particulate filter(DPF)is a leading technology reducing particle emissions from marine diesel engines.The removal or regeneration of soot in DPF is an important issue.The purpose of this study is to provide some reference strategies to design the DPF for marine diesel engines.In this paper,a mathematical model of a marine DPF was built up and the particle trap process and the regeneration dynamics were simulated.The results show that the cake soot mass concentrations from 0 to 4.2 g/L during the trap process increase linearly with the increase of the exhaust gas flows while the depth soot mass concentrations from 0 to 2.2 g/L firstly increase linearly and then keep constant.Soot is mainly concentrated in the front and rear portion of the filter and less soot is in the middle.The soot distribution in the cake and depth layers shows the unevenness during the trap and regeneration process.The initial soot loadings have great effects on pressure drops and soot mass concentrations before regeneration,but the little effect after regeneration.The exhaust gas temperature heated to 850 K can achieve 94%efficiency for the DPF regeneration.The heating rate has no effects on the pressure drops and soot mass concentrations,but the heating duration time of exhaust gas has an important impact on them.展开更多
Diesel particulate filter (DPF) is an important factor which influences the sound from exhaust system of an engine. In order to understand the propagation law of sound wave and predict the insertion loss in DPF, based...Diesel particulate filter (DPF) is an important factor which influences the sound from exhaust system of an engine. In order to understand the propagation law of sound wave and predict the insertion loss in DPF, based on the general aero-dynamic equations and Darcy′s law, an acoustic property calculation model of DPF is constructed. Propagation and attenuation characteristics of the forward and backward propagating acoustic waves in the close and open pipe of the filter are investigated. The theoretical model is combined with experiment to investigate sound attenuation property of DPF. The insertion loss obtained from the experiment is compared with that computed for a DPF. The results from the experiment and theoretical calculation agree well.展开更多
In this study,the effect of new and used catalyzed diesel particulate filter(CDPF)with different catalyst loadings on the particulate emissions including the particle mass(PM),particle number(PN),particle size distrib...In this study,the effect of new and used catalyzed diesel particulate filter(CDPF)with different catalyst loadings on the particulate emissions including the particle mass(PM),particle number(PN),particle size distribution(PSD)and geometric mean diameter(GMD)from a diesel vehicle were investigated based on a heavy chassis dynamometer.Results showed that more than 97.9%of the PN and 95.4%of the PM were reduced by the CDPF,and the reduction efficiency was enhanced by the catalyst loading.After using the CDPF,the PSD transformed from bimodal to trimodal with the peak shifting towards smaller particle size,more nucleation mode particles were reduced compared with accumulation mode ones,but the reduction effect on the accumulation mode particles was more significantly influenced by the catalyst loading.Notably,the CDPF increased the accumulation mode particles proportion,producing a larger GMD.For the used CDPF,its reduction effect on the particulate emissions enhanced,especially for the PM in accumulation mode.The PSD returned to bimodal,but the peak at accumulation mode began to be higher than that at nucleation mode,illustrating that more nucleation mode particles was removed.The aging of the CDPF resulted in greater effect on the PN-based PSD than that of PM-based PSD,but the effect of catalyst loading on the PN and PM emission factors was weakened.The used CDPF further increased the GMD,and the effect of catalyst loading on the GMD was strengthened,a higher catalyst loading led to a reduction in the GMD.展开更多
基金Projects(5117604551276056)supported by the National Natural Science Foundation of China+1 种基金Projects(201208430262201306130031)supported by the National Studying Abroad Foundation of the China Scholarship Council
文摘Taking wall-flow diesel particulate filter(DPF) as the research objective and separately assuming its filtering wall to be composed of numerous spherical or cylindrical elements, two different mathematical models of steady filtration for wall-flow diesel particulate filter were developed and verified by experiments as well as numerically solved. Furthermore, the effects of the macroand micro-structural parameters of filtering wall and exhaust-flow characteristic parameters on trapping efficiency were also analyzed and researched. The results show that: 1) The two developed mathematical models are consistent with the prediction of variation of particulate size; the influence of various factors on the steady trapping efficiency is exactly the same. Compared to model 2, model 1 is more suitable for describing the steady filtration process of wall-flow diesel particulate filter; 2)The major influencing factors on steady trapping efficiency of wall-flow diesel particulate filter are the macro-and micro-structural parameters of filtering wall; and the secondary influencing factors are the exhaust-flow characteristic parameters and macro-structural parameters of filter; 3)The steady trapping efficiency will be improved by increasing filter body volume, pore density as well as wall thickness and by decreasing exhaust-flow, but effects will be weakened when particulate size exceeds a certain critical value; 4) The steady trapping efficiency will be significantly improved by increasing exhaust-flow temperature and filtering wall thickness, but effects will be also weakened when particulate size exceeds a certain critical value; 5) The steady trapping efficiency will approximately linearly increase with reducing porosity, micropore aperture and pore width.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2009AA045103 )Tianjin Provincial Natural Science Foundation of China (Grant No. 05YFJMJC10700)
文摘Diesel powered vehicles, in compliance with the more strict exhaust emission standards such as Euro V, is likely to require a diesel particulate filter （DPF）. A DPF used on a vehicle will affect the acoustic emission of the diesel engine, so it is important to investigate the sound propagation rule in DPF and further to propose the optimum DPF design. However, due to the geometrical complexity of the DPF, the traditional analysis method, such as analytical method, can not assess the acoustic performance of DPF accurately in medium and high frequency band. In this paper, a combined approach of finite element analysis and viscosity correction is proposed to predict acoustic performance of DPF. A simplified model of the full DPF is established and is used to analyze the sound propagation characteristic of the DPF. The distribution of the sound pressure and velocity, the transmission matrix of the DPF are obtained using the finite element method. In addition, the method of the viscosity correction is used in the transmission matrix of the DPF to evaluate the acoustic performance of DPF. Based on the FEM computation and the viscosity correction, the transmission losses under the rated load and idle condition of a diesel engine are calculated. The calculation results show that DPF can effectively attenuate exhaust noise, and sound attenuation increase with the rise of the frequency. Sound attenuation is better under rated condition than idle condition of diesel engine, particularly in frequency above 1 000 Hz.
基金supported by National Natural Science Foundation of China (No. 51806085)China Postdoctoral Science Foundation (No. 2018M642175)+2 种基金Jiangsu Planned Projects for Postdoctoral Research Fund (No. 2018K101C)Open Research Subject of Key Laboratory of Automotive Measurement, Control and Safety (Xihua University) (No. QCCK2021-007)the Graduate Student Innovation Fund Project of Jiangsu Province (No. KYCX21_3354)
文摘To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter(DPF),a self-designed packed-bed dielectric barrier discharge(DBD)reactor for DPF regeneration was developed.The DBD reactor with the main active substance of nonthermal plasma(NTP)as the target parameter was optimized by adjusting the feed gas,packing particles(material or size),and cooling water temperature.Moreover,a set of optimal working parameters(gas source,O_2;packing particles,1.2–1.4 mm ZrO_(2);and cooling water temperature,20℃)was selected to evaluate the effect of different O_(3) concentrations on DPF regeneration.The research results showed that selecting packing particles with high dielectric constant and large particles,as well as reducing the cooling water temperature,with oxygen as the feed gas,contributed to an increase in O_(3) concentration.During DPF regeneration,the following changes were observed:the power of the NTP reactor decreased to lower than 100 W,the O_(3) concentration increased from 15 g m^(-3) to 45 g m^(-3),the CO and CO_2 volume fractions of the particulate matter decomposition products increased,and the peak regeneration temperature increased to 173.4℃.The peak temperature arrival time was 60 min earlier,indicating that the regeneration rate of DPF increased with the increase in O_(3) concentration.However,the O_(3) utilization rate(the amount of carbon deposit removed per unit volume O_(3))initially increased and then decreased;when the O_(3) concentration was set to 25 g m^(-3),the highest O_(3) utilization rate was reached.The packed-bed DBD technology contributed to the increase in the concentration of NTP active substances and the regeneration efficiency of DPF.It provides a theoretical and experimental basis for high-efficiency regeneration of DPF at low temperatures(<200℃).
基金Projects(51176045,51276056)supported by the National Natural Science Foundation of ChinaProject(201208430262)supported by the National Studying Abroad Foundation Project of China
文摘Numerical simulation has been carried out to investigate the major factors affecting the time of composite regeneration due to coupling cerium-based additive and microwave for diesel particulate f3ilter(DPF). Effect on the composite regeneration time from various factors such as mass flow rate of exhaust gas, temperature of exhaust gas, oxygen concentration of exhaust gas, microwave power and amount of cerium-based additive are investigated. And a mathematical model based on fuzzy least squares support vector machines has been developed to forecast the endpoint of the composite regeneration. The results show that the relative error of endpoint forecasting model of composite regeneration is less than 3.5%, and the oxygen concentration of exhaust gas has the biggest effect on the endpoint of composite regeneration, followed by the mass flow rate of exhaust gas, the microwave power, the temperature of exhaust gas and the amount of cerium-based additive.
文摘An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of trapped particulate matter(PM)were conducted.The concentrations of the PM decomposition products(CO,)and the internal temperature of the DPF were monitored to determine the performance of DPF regeneration and thermal safety of the NTP technology.The results showed that the concentrations of CO and CO2and the mass of P.V1 decomposition increased with the increase in the amount of captured PM,whereas the concentration of the NTP active substance(O,)escaping from the DPF decreased under the same working conditions of the NTP injection system.A higher amount of captured PM promoted the oxidative decomposition reaction between NTP and PM and improved the utilization rate of the NTP active substances.The peak temperature at the same measuring point inside the DPF generally increased and the phases of the peak temperature were delayed as the amount of captured PM increased.The temperature peaks and temperature gradients during the DPF regeneration process were far lower than llie failure limit value,which indicates that NTP regeneration technology has good thermal durability and increases the service life of the DPF.
文摘Numerical simulations are performed both for the single airflow and air-PMtwo-phase flow in wall flow diesel participate filters (DPF) for the first time. The calculationdomain is divided into two regions. In. the inlet and outlet flow channels, the simulations areperformed for the steady and laminar flow; In the porous filtration walls, the calculation model forflow in porous media is used. The Lagrange two-phase flow model is used to calculate the air-PMflow in DPF, for the dispersed phase (PM), its flow tracks are obtained by the integrating of theLagrange kinetic equation. The calculated velocity, pressure distribution and PM flow tracks in DPFare obtained, which exhibits the main flow characteristics in wall flow DPF and will be help for theoptimal design and performance prediction of wall flow DPF.
基金supported by the National Key Research and Development Program of China(Grant No.2017YFE0116100).
文摘Diesel particulate filter(DPF)is a leading technology reducing particle emissions from marine diesel engines.The removal or regeneration of soot in DPF is an important issue.The purpose of this study is to provide some reference strategies to design the DPF for marine diesel engines.In this paper,a mathematical model of a marine DPF was built up and the particle trap process and the regeneration dynamics were simulated.The results show that the cake soot mass concentrations from 0 to 4.2 g/L during the trap process increase linearly with the increase of the exhaust gas flows while the depth soot mass concentrations from 0 to 2.2 g/L firstly increase linearly and then keep constant.Soot is mainly concentrated in the front and rear portion of the filter and less soot is in the middle.The soot distribution in the cake and depth layers shows the unevenness during the trap and regeneration process.The initial soot loadings have great effects on pressure drops and soot mass concentrations before regeneration,but the little effect after regeneration.The exhaust gas temperature heated to 850 K can achieve 94%efficiency for the DPF regeneration.The heating rate has no effects on the pressure drops and soot mass concentrations,but the heating duration time of exhaust gas has an important impact on them.
基金Supported by Natural Science Foundation of Tianjin (05YFJMJC10700).
文摘Diesel particulate filter (DPF) is an important factor which influences the sound from exhaust system of an engine. In order to understand the propagation law of sound wave and predict the insertion loss in DPF, based on the general aero-dynamic equations and Darcy′s law, an acoustic property calculation model of DPF is constructed. Propagation and attenuation characteristics of the forward and backward propagating acoustic waves in the close and open pipe of the filter are investigated. The theoretical model is combined with experiment to investigate sound attenuation property of DPF. The insertion loss obtained from the experiment is compared with that computed for a DPF. The results from the experiment and theoretical calculation agree well.
基金supported by the Shanghai Sailing Program (No.21YF1448900)the Jiangxi Technological Innovation Guidance Plan Project (No.20212BDH80015)。
文摘In this study,the effect of new and used catalyzed diesel particulate filter(CDPF)with different catalyst loadings on the particulate emissions including the particle mass(PM),particle number(PN),particle size distribution(PSD)and geometric mean diameter(GMD)from a diesel vehicle were investigated based on a heavy chassis dynamometer.Results showed that more than 97.9%of the PN and 95.4%of the PM were reduced by the CDPF,and the reduction efficiency was enhanced by the catalyst loading.After using the CDPF,the PSD transformed from bimodal to trimodal with the peak shifting towards smaller particle size,more nucleation mode particles were reduced compared with accumulation mode ones,but the reduction effect on the accumulation mode particles was more significantly influenced by the catalyst loading.Notably,the CDPF increased the accumulation mode particles proportion,producing a larger GMD.For the used CDPF,its reduction effect on the particulate emissions enhanced,especially for the PM in accumulation mode.The PSD returned to bimodal,but the peak at accumulation mode began to be higher than that at nucleation mode,illustrating that more nucleation mode particles was removed.The aging of the CDPF resulted in greater effect on the PN-based PSD than that of PM-based PSD,but the effect of catalyst loading on the PN and PM emission factors was weakened.The used CDPF further increased the GMD,and the effect of catalyst loading on the GMD was strengthened,a higher catalyst loading led to a reduction in the GMD.
