Anti-chloride permeability and anti-chloride corrodibility of a green high performance concrete admixture in concrete

The effects of green high performance concrete (GHPC) admixture on the anti-chloride permeability and anti- chloride corrodibility of concrete are studied by a series of experiments designed on the basis of the diffusion principle and electro-chemical principle. The GHPC admixture consists of fly ash, gangue, slag, red mud, etc., of which the mass fraction of industrial residues is over 96 %. The anti-permeabilities and anti-corrodibilities of the tested GHPC and normal concrete (NC) are evaluated by the Diffusion Coefficients of chloride which was obtained by measuring the concentration of chloride in the tested systems by the voltage difference method. It is found that the adoption of GHPC admixture greatly improves the anti-chloride permeability and anti-chloride corrodibility by modifying the inner structure and contracting the porosity of concrete to the reduce considerably the diffusion rate of chloride. The admixture is desirable regarding its engineering performances as well as economical and environmental interests.

A PLL Clock Frequency Multiplier Using Dynamic Current Matching Adaptive Charge-Pump and VCO Frequency Reuse

A 3.5 times PLL clock frequency multiplier for low voltage different signal （LVDS） driver is presented. A novel adaptive charge pump can automatically switch the loop bandwidth and a voltage-controlled oscillator （VCO） is designed with the aid of frequency ranges reuse technology. The circuit is implemented using 1st Silicon 0.25 μm mixed-signal complementary metal-oxide-semiconductor （CMOS） process. Simulation results show that the PLL clock frequency multiplier has very low phase noise and very short capture time .

Design of Automatic Quasi-synchronizing Device in Rural Small Hydropower Station

Generator synchronization is an important and frequent operation in rural small hydropower station. In order to ensure that generator can be paralleled in the grid automatically, efficiently, and stably in the rural small hydropower station whose parallel in operation still needs to be accomplished manually. This paper described an automatic quasi-synchronizing device, based on 89C52 Single-chip Microcomputer （SCM）. Its hardware includes three modules and its software is structuralized. The device structure is simple, and its reliability is high and the maintenance is easy. Besides, convenient Human Machine Interface （HMI） makes the parameter setting simple and flexible

An active equalization strategy for series-connected lithium-ion battery packs based on a dual threshold trigger mechanism

It is well acknowledged to all that an active equalization strategy can overcome the inconsistency of lithium-ion cell's voltage and state of charge(SOC)in series-connected lithium-ion battery(LIB)pack in the electric vehicle application.In this regard,a novel dual threshold trigger mechanism based active equalization strategy(DTTMbased AES)is proposed to overcome the inherent inconsistency of cells and to improve the equalization efficiency for a series-connected LIB pack.First,a modified dual-layer inductor equalization circuit is constructed to make it possible for the energy transfer path optimization.Next,based on the designed dual threshold trigger mechanism provoked by battery voltage and SOC,an active equalization strategy is proposed,each single cell's SOC in the battery packs is estimated using the extended Kalman particle filter algorithm.Besides,on the basis of the modified equalization circuit,the improved particle swarm optimization is adopted to optimize the energy transfer path with aiming to reduce the equalization time.Lastly,the simulation and experimental results are provided to validate the proposed DTTM-based AES.

A robust solution for hesitate phenomenon in pick up process of aerospace electromagnetic relay

As for aerospace electromagnetic relay （AEMR） which is of small batches and having difficulty in automatic production, the uncertainty phenomenon is remarkable due to excessive manual work involved in the assembly and adjustment processes. This kind of uncertainty may increase the coil voltage difference （CVD） caused by hesitate phenomenon in the pick up process of AEMR. Taking a certain type of AEMR for example, the CVD problem in the actual producing process has been studied in this paper. The primary cause of this issue, two-steps of armature motion （namely hesitate phenomenon） in the pick up process, has been found by analyzing the matching characteristics of electromagnetic and mechanical torques of AEMR. Through the optimization of the matching characteristics, the two-steps of armature motion problem is solved by robust design of the return reed which is a key part of AEMR. The validity of this research has been proved by the comparison of characteristics of AMER before and after the optimization.

Design and analysis of a three-stage voltage-controlled ring oscillator

This paper describes a large tuning range low phase noise voltage-controlled ring oscillator （ring VCO） based on a different cascade voltage logic delay cell with current-source load to change the current of output node. The method for optimization is presented. Furthermore, the analysis of performance of the proposed ring VCO is confirmed by the measurement results. The three-stage proposed ring VCO was fabricated in the 180-nm CMOS process of SMIC. The measurement results show that the oscillator frequency of the ring VCO is from 0.77O to 5.286 GHz and the phase noise is 97.93 dBc/Hz at an offset of 1 MHz from 5.268 GHz with a total power of 15.1 mW from a 1.8 V supply while occupying only 0.00175 mm2 of the core die area.