基于特级初榨橄榄油两种不同特性的DSC掺假分析方法研究

该文基于油脂物理特性与氧化稳定性2种特性,利用差示扫描量热法(differential scanning calorimetry,DSC)对市面上常见的特级初榨橄榄油(extra virgin olive oil,EVOO)中大豆油掺假问题进行研究。在物理特性方面,采用DSC冷却曲线来分析EVOO掺假。随着大豆油掺假比例升高,油样在-40~-60℃结晶焓值ΔH由EVOO的29.78 J/g减小为40%掺假混合油的6.133 J/g,对EVOO质量比构建的一元回归方程Y=57.556X-28.44(R2=0.997)。在氧化稳定性方面,氧化温度160℃下,不同油样诱导氧化时间随大豆油掺假比例上升逐渐变短,由EVOO的25.8 min逐渐减小为40%掺假混合油的17.8 min,Y=-19.4X+25.64(R^(2)=0.996),掺假模型相关性较好。这2种DSC检验掺假分析方法都能有效鉴别EVOO中大豆油的掺假且各有特点,可根据实际情况选取合适的方法更好处理EVOO掺假问题。

DIFFERENTIAL SCANNING CALORIMETRY AND X-RAY DIFFRACTION STUDIES ON AGING BEHAVIOR OF Zn-Al ALLOYS

Decomposition processes of the quenched Zn-Al alloys were studied by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that the stabilities of supersaturated solid solution (SSS) of Zn-Al alloy and α' phase formed by quenching would reduce with the increase of Zn content and the precipitation of η-Zn phases even when aging at ambient temperature, so that the exothermic precipitation peak in DSC curve would disappear. The activation energy of the η-Zn precipitation and the reaction enthalpy were calculated and measured. The kinetics of α' decomposition or η-Zn formation was determined by XRD. The microstructure change during aging was observed by TEM.

Research on thermal decomposition of 1,3,5-trinitro-1,3,5-triazinane based on differential scanning calorimetry

In order to test the thermal decomposition of 1,3,5-trinitro-1,3,5-triazinane(RDX),the linear temperature rise experiment of RDX was carried out by differential scanning calorimeter under different heating rate conditions.The kinetic calculation of RDX thermal decomposition curve was carried out by Kissinger and Ozawa methods,respectively,and the thermal analysis software was used to calculate the parameters such as self-accelerating decomposition temperature.The results show that the initial decomposition temperature range,decomposition peak temperature range,and decomposition completion temperature range of RDX are 208.4-214.2,225.7-239.3 and 234.0-252.4℃,respectively,and the average decomposition enthalpy is 362.9 J·g^-1.Kissinger method was used to calculate the DSC experimental data of RDX,the apparent activation energy obtained is 190.8 kJ·mol^-1,which is coincident with the results calculated by Ozawa method at the end of the reaction,indicating that the apparent activation energy calculated by the two methods is relatively accurate.When the packaging mass values are 1.0,2.0 and 5.0 kg,respectively,the self-accelerating decomposition temperatures are 97.0,93.0 and 87.0℃,respectively,indicating that with the increase of packaging mass,the self-accelerating decomposition temperature gradually decreases,and the risk increases accordingly.

Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry

Differential scanning calorimetry （DSC） has been used extensively to study different solid state reactions. The signals measured in DSC are associated with the growth and dissolution of different precipitates during a specific heat cycle. The time-temperature dependence of heat cycles and the corresponding heat flow evolution measured in the sample by DSC provide valuable experimental information about the phase evolution and the precipitation kinetics in the material. The thermo-kinetic computer simulation was used to predict the DSC signals of samples taken from 6xxx and 2xxx alloys. In the model, the evolution of different metastable and stable phases and the role and influence of excess quenched-in vacancies in the early stage of precipitation were taken into account. Transmission electron microscopy （TEM） and high-resolution TEM were used to verify the existence of precipitates, their size and number density at specific points of the DSC curves.

Synthesis kinetics of Mg_2Sn in Mg-Sn powder mixture using non-isothermal differential scanning calorimetry

The non-isothermal heating process of Mg-Sn powder mixture was studied by differential scanning calorimetry(DSC) technique and the synthesis kinetics of Mg2Sn was evaluated by the model-free and model-fitting methods.The activation energy and conversion function of Mg2Sn synthesis reaction are calculated to be 281.7 kJ/mol and g(α)=[-ln(1-α)] 1/4,respectively.The reaction mechanism of 2Mg+Sn→Mg2Sn under non-isothermal condition is regarded as "nucleation and growth" .During the non-isothermal heating process,the phase transformation occurred in the Mg-Sn powder mixture was analyzed by XRD and the microstructure evolution of Mg2Sn was observed by optical microscopy,which is in good agreement with the reaction mechanism of 2Mg+Sn→ Mg2Sn deduced from the kinetic evaluation.

不同基原、炮制品及混伪品没药饮片的DSC图谱鉴别研究

目的:建立差示扫描量热法(DSC)鉴别区分天然没药、胶质没药、没药炮制品、没药混伪品。方法:收集不同基原、炮制品、混伪品的没药样品,通过考察升温范围、升温速率、粒度大小等因素对没药DSC试验条件的影响,在优化条件下应用差示扫描量热仪对没药各样品进行差热图谱扫描、对比分析。结果:DSC试验优化条件为升温范围-25~550℃、粒度大小100目、升温速率50℃/min;130℃附近的吸热峰与330℃附近的放热峰为没药的特征峰。天然没药、胶质没药在130℃和330℃位置特征峰的平均温度、热焓值均有明显差异,天然没药在两位置的热焓值均明显低于胶质没药。通过比对特征峰可以清晰地鉴别出伪品(松脂、枫香脂)在130℃和330℃附近位置均无该特征峰,混伪品枫香脂在10℃有吸热特征峰,混伪品松脂在150℃附近有明显的放热峰;醋制天然没药在180℃与240℃附近特征峰的热焓值均比天然没药低。结论:DSC试验可快速准确鉴别天然没药、胶质没药、伪品枫香脂及松脂;DSC可快速区分醋制没药与没药;130℃吸热峰、330℃放热峰为没药特征峰。

Studies of the Energy Release of Mitochondria from Sporophyte Cytoplasmic Male Sterile Rice by Differential Scanning Calorimetry

The differential scanning calorimetric (DSC)curves of the mitochondria isolated from two varieties of sporophyte cytoplasmic male sterile and their fertile lines of Yie Bai and Ma Xie type rice have been determined. The curves show that the energy is released continuously as temperature rise to 70℃. Some thermodynamic and kinetic parameters of the energy release of the mitochondria have been obtained. The presented results showed that the mitochondria from cytoplasmic male sterile rice released more heat and they had higher energy barrier, less rate, and more complicated mechanism than that of their fertile lines in the energy release process.

Measurement of Crystallinity of Acrylic Copolymer by Swelling Differential Scanning Calorimetry

In this paper the measurement of crystallinity(C)ofacrylic copolymer(PAC),by Swelling Differential Scan-ning Calorimetry(SDSC)is discussed.Common DSC isonly used for measuring the crystallinity of polymers withmelting point,(T_m),below their decomposition temper-ature,(T_d).As temperature rises,polymers with swell-ing agent added become swollen and dissolved,goingthrough whole process of breaking solid structures.Thus,SDSC makes it possible to measure the crystallini-ty of polymers even with T_d below T_m.But the C mea-sured by WAXD and the total endothermal melting(swelling)heat in SDSC thermograms,(△H_l),are notlinearly correlated.It has been found that,instead of the△H_l,△H_l’obtained from the △H_l by subtracting the en-dothermal heat,△H_l,and the C measured by WAXDare linearly correlated.On the basis of this linear rela-tion,the unknown C of another PAC sample is measuredby SDSC.The result is in good accordance with thatmeasured by WAXD.

Comparison between Glass and Stainless-Steel Vessels in Differential Scanning Calorimetry Estimation

Differential scanning calorimetry (DSC) provides easy screening for thermal hazard evaluation. Here, we investigate the difference between using glass and stainless-steel vessels on the DSC measurement of exothermic decomposition energy (QDSC) for 41 chemical substances (containing nitro, halogen, peroxide, and sulfur groups, and hydrazine bonds). Two borosilicate glass vessels (capillary and ampule) and one stainless-steel vessel were used. All QDSC values obtained were investigated with reference to the permissible fluctuation range specified by the ASTM (American Society for Testing and Materials) international Both glass vessels produced very similar QDSC values, despite different sample scales. The QDSC values obtained with the glass vessels were generally roughly within the variation tolerance range of the stainless-steel vessel. Notable exceptions were halogen- or sulfur-containing compounds;these exhibited smaller QDSC values with glass vessels in almost all cases. We will investigate whether certain structures in compounds react with stainless steel. The vessel material choice is crucial in evaluating the true reactivity of a substance.

Application of Single Scan Differential Scanning Calorimetry Technique for Determination of Kinetic Parameters of Crystallisation in Se-Sb-Ag

A single scan has been performed in Differential Scanning Calorimetry (DSC) at a heating rate of 15oC/min under non-isothermal conditions to investigate the crystallization kinetics of glassy Se90Sb10-xAgx alloys (where x = 2, 4, 6, 8). For this purpose, Handerson’s theory based on non-isothermal method for thermal analysis of single-scan DSC data has been used. The activation energy of crystallization and order parameter has been determined and composition dependence of these parameters has been discussed.

Thermal Diffusivity and Thermal Conductivity of Epoxy-Based Nanocomposites by the Laser Flash and Differential Scanning Calorimetry Techniques

Nanocomposites were fabricated by using a commercial two part epoxy as a matrix and multiwalled carbon nanotubes, graphite fibers and boron nitride platelets as filler materials. Multiwalled carbon nanotubes (MWCNTs) that were produced by chemical vapor deposition were found to produce nanocomposites with better thermal diffusivity and thermal conductivity than the MWCNTs that were produced by the combustion method. Compared to the MWCNTs produced by both methods and graphite fibers, boron nitride produced nanocomposites with the highest thermal conductivity. Specific heat capacity was measured by using differential scanning calorimetry and thermal diffusivity was measured by using the laser flash.

DSC法测定PET/PTT混纺产品中PTT纤维含量的不确定度评定

文中以差式扫描量热法(DSC)测定PTT(聚对苯二甲酸丙二醇酯)纤维含量为实验依据,分析实验过程中的不确定度来源并进行具体量化,得出差式扫描量热仪系统误差和热量求积是不确定度主要来源的结论。DSC法测定PTT纤维含量的相对扩展不确定度为3.58%(k=2)。根据笔者在实验室长期检测的经验,给出提高检测结果准确性的建议。

Application of differential scanning calorimetry to study the interpretation on herbal medicinal drugs:a review

Background:Differential scanning calorimetry as a method of investigating and monitoring the kinetics of herbal medicinal plants.Some instrumental and experimental aspects are discussed.Methods:A brief survey is made of herbal medicinal plants and results of differential scanning calorimetry studies are reviewed and this discussion is presented the effects of the instrumental conditions like heating rate and the sample conditions like sample particle size,sample mass,sample purity,sample stability in the melting region and property of impurities.Conclusion:This study suggests that application of differential scanning calorimetry to study the interpretation on herbal medicinal drugs.

牛、羊乳粉的DSC热学性质比较及掺假分析

为明确羊乳粉、牛乳粉的热学特征,采用差示扫描量热法(differential scanning calorimetry,DSC)对真空冷冻干燥制备的全脂羊、牛乳粉样品以及高比例掺假(75%、50%、25%)和低比例掺假(10%、5%、3%、1%)牛乳粉的混合羊乳粉样品进行热力学分析。结果表明,全脂羊乳粉和全脂牛乳粉在DSC热学指标上存在差异,全脂牛乳粉相比全脂羊乳粉缺失一个脂肪特征熔融吸热峰b,蛋白质熔融吸热峰c峰值温度和热焓值较低,而乳糖熔化分解峰e热焓值较高。对于掺入不同比例牛乳粉的羊乳粉,通过检测是否存在吸热峰b及其热焓值,可判断样品掺假牛乳粉比例是否在25%以下及判断掺入牛乳粉的量;在不同比例掺假样品中检测乳糖熔化分解峰e的焓值可判断羊乳粉掺入牛乳粉的掺假量。因此,DSC技术可以实现对羊乳粉、牛乳粉热学性质的分析和评价,也可作为乳制品行业质量保证和真实性鉴别的潜在分析工具。

ATR-FTIR结合DSC法快速鉴别食品接触用塑料包装制品

研究了一种衰减全反射红外光谱(ATR-FTIR)结合差示扫描量热法(DSC)快速鉴别食品接触用塑料包装制品单一材质的方法。红外光谱图能准确反应塑料制品的内部结构,结合DSC曲线得出其具体成分。该方法快速、准确且几乎不破坏样品。

基于强流脉冲离子束的中子辐照模拟装置及评价技术

依据高能原子辐照与中子辐照的初级离位原子(PKA)能谱相似性,基于TEMP-6M型强流脉冲离子束(HIPIB)系统,研发了一种中子辐照模拟装置,该装置以磁绝缘离子二极管伴生的强流脉冲二次电子束流实现0.1 MeV以上高能离子的高效率中和,获得动能为0.1~1 MeV、脉冲宽度为120~160 ns、脉冲辐照剂量为1012~10^(15)n/cm^(2)的强流脉冲原子或混合束,原子占比为85%~100%。通过辐照缺陷原位差热分析方法,快速确定材料缺陷数量、密度及dpa损伤速率等抗中子辐照性能评价指标。以核级AISI 304奥氏体不锈钢为例,计算PKA相似性定标曲线,采用220~280 keV的C原子等效1.8~2.3 MeV中子进行辐照模拟,调节名义束流能量密度0.5~4 J/cm^(2),实测辐照剂量范围为0.46×10^(13)~8.55×10^(13)n/cm^(2),热分析确定Frenkel缺陷密度为1.99×10^(16)~2.90×10^(17)/cm^(2),外推预测奥氏体不锈钢在1021n/cm^(2)中子剂量条件下的辐照损伤为500 dpa量级,适用于核电厂结构材料60年服役寿期评价需求。

DSC对苯基苯酚改性酚醛树脂固化机理研究

采用DSC技术、Kissinger法对苯基苯酚改性酚醛树脂的固化过程进行了研究,得到放热峰顶活化能为169.3 kJ/mol,远大于普通酚醛树脂(约70 kJ/mol)。理论近似凝胶温度、固化温度及后处理温度分别为414.5 K、448.9 K和483.9K。酚醛树脂的固化通常由化学反应控制和扩散控制两阶段组成。通过Ozawa法得到活化能与转化率(E-a)的变化关系表明,2种树脂固化历程存在明显差异。普通酚醛树脂固化反应进行到10%(a=10%),粘度迅速增大,反应转向扩散控制;而苯基苯酚改性酚醛树脂固化反应时粘度变化小,直至a=70%,才较快增长。这将有利于小分子的逃逸和各基团充分反应。同时高活化能也表明,反应形成了高键能的化学键,有利于提高树脂的残炭率和烧蚀性能。

城市生活垃圾热解特性的TG-DSC分析

Seven typical components in municipal solid wastes (MSWs)--paper,food,textile,wood,straw,plastic and rubber were chosen as the thermogravimetric analysis samples in this paper to study the pyrolysis characteristics. By the thermogravimetry and differential scanning calorimetry (TG-DSC) analysis,pyrolysis characteristics of MSWs’ components and pyrolysis endothermal enthalpy were obtained.The kinetic parameters of pyrolysis were determined with the Doyle method and a multi-stage first order pyrolysis model was proposed.The simulated results by this model showed good agreement with the TG experimental data.The pyrolysis characteristics provide significant parameters to a new concept of circulating fluidized bed incinerator,which can simultaneously restrain the high-temperature HCl corrosion and emission of dioxins.

DSC法测定生物质的比热

将DSC技术应用于5种林业废弃物及低温热解焦炭的比热测定,通过分析标准样——刚玉(Al2O3)与生物质样品在升温过程中的吸热特性,可得到样品的比热,同时利用前人经验公式进行了对比分析。生物质样品的比热为1.55～1.62 J/(g.℃),焦炭的比热为0.83～0.99 J/(g.℃),与文献报道一致,这也证明了DSC测定生物质比热的可行性。

四硝基并哌嗪(TNAD)与推进剂组分相容性的DSC法评估

采用差示扫描量热法(DSC),研究了四硝基并哌嗪(TNAD)与奥克托今(HMX)、黑索今(RDX)、二硝基哌嗪(DNP)、1.25/1-NC/NG混合物、3-硝基-1,2,4-3-己基铅(NTO-Pb)、铝粉(13.8μm)和吉钠(D INA)等含能组分的相容性;同时也研究了TNAD与聚乙二醇(M=10000)、二异氰酸酯(N-100)、2-硝基二苯胺(2-NDPA)、1,3-二甲基-1,3-二苯基脲(C2)、炭黑(C.B.)、三氧化二铝(A l2O3)、2,4-二羟基苯甲酸铜(β-Cu)、己二酸铜(AD-Cu)和邻苯二甲酸铅(φ-Pb)等惰性材料的相容性。研究表明:TNAD与NC+NG、RDX、NTO-Pb和PET相容性较好;与D INA、HMX轻微敏感;而对2-NDPA,φ-Pb,-βCu,AD-Cu和A l2O3等惰性材料敏感,与DNP、PEG,N-100,C2和C.B.等不相容。由此可见,TNAD能与推进剂主要组分相容,可在NC+NG体系的改性双基推进剂中应用。