The key factor in semi-solid metal processing is the solid fraction at the forming temperature because it affects the microstructure and mechanical properties of the thixoformed components. Though an enormous amount o...The key factor in semi-solid metal processing is the solid fraction at the forming temperature because it affects the microstructure and mechanical properties of the thixoformed components. Though an enormous amount of data exists on the solid fraction-temperature re- lationship in A356 alloy, information regarding the solid fraction evolution characteristics of A356-TiB2 composites is scarce. The present article establishes the temperature-solid fraction correlation in A356 alloy and A356-xTiB2 （x = 2.5wt% and 5wt%） composites using dif- ferential thermal analysis （DTA）. The DTA results indicate that the solidification characteristics of the composites exhibited a variation of 2℃ and 3℃ in liquidus temperatures and a variation of 3℃ and 5℃ in solidus temperatures with respect to the base alloy. Moreover, the eutectic growth temperature and the solid fraction（fs） vs. temperature characteristics of the composites were found to be higher than those of the base alloy. The investigation revealed that in-situ formed TiB2 particles in the molten metal introduced more nucleation sites and reduced undercooling.展开更多
Water is the most active component in all geological systems. It has an importanteffect on the physical properties of minerals and melts. It also plays a key role in the evolutionof the Earth. Accurate thermodynamics ...Water is the most active component in all geological systems. It has an importanteffect on the physical properties of minerals and melts. It also plays a key role in the evolutionof the Earth. Accurate thermodynamics data on water are currently confined to pressures below1.0 GPa and temperatures below 900℃. Presented in this paper are new data available on theP-T properties of water at pressures up t0 5. 0 GPa, developed from differential thermal analysis and ultrasonic wave amplitude analysis. It has been found that there may exist anotherternary point at 3. 0 GPa and that ultrasonic wave amplitude change of ice-water transitionshows two inflection points above 2. 0 GPa, consistent with the two peaks of differential thermal curves above 2. 0 GPa. It may be a new phenomenon which needs further study.展开更多
A research on the application of a TG-DTA(thermal gravimetry aifferential thermal analysis)to the quick determination of moisture,organic volatile fixed carbon,ash and caloric value for coal is described.
In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the...In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.展开更多
基金financial support from the Indian Institute of Technology Bhubaneswar under the SEED project grant for fabricating the "cooling slope casting" experimental setupthe support extended by Central Research Facility (CRF), Indian Institute of Technology Kharagpur, toward the facility for conducting DTA experiments
文摘The key factor in semi-solid metal processing is the solid fraction at the forming temperature because it affects the microstructure and mechanical properties of the thixoformed components. Though an enormous amount of data exists on the solid fraction-temperature re- lationship in A356 alloy, information regarding the solid fraction evolution characteristics of A356-TiB2 composites is scarce. The present article establishes the temperature-solid fraction correlation in A356 alloy and A356-xTiB2 （x = 2.5wt% and 5wt%） composites using dif- ferential thermal analysis （DTA）. The DTA results indicate that the solidification characteristics of the composites exhibited a variation of 2℃ and 3℃ in liquidus temperatures and a variation of 3℃ and 5℃ in solidus temperatures with respect to the base alloy. Moreover, the eutectic growth temperature and the solid fraction（fs） vs. temperature characteristics of the composites were found to be higher than those of the base alloy. The investigation revealed that in-situ formed TiB2 particles in the molten metal introduced more nucleation sites and reduced undercooling.
文摘Water is the most active component in all geological systems. It has an importanteffect on the physical properties of minerals and melts. It also plays a key role in the evolutionof the Earth. Accurate thermodynamics data on water are currently confined to pressures below1.0 GPa and temperatures below 900℃. Presented in this paper are new data available on theP-T properties of water at pressures up t0 5. 0 GPa, developed from differential thermal analysis and ultrasonic wave amplitude analysis. It has been found that there may exist anotherternary point at 3. 0 GPa and that ultrasonic wave amplitude change of ice-water transitionshows two inflection points above 2. 0 GPa, consistent with the two peaks of differential thermal curves above 2. 0 GPa. It may be a new phenomenon which needs further study.
文摘A research on the application of a TG-DTA(thermal gravimetry aifferential thermal analysis)to the quick determination of moisture,organic volatile fixed carbon,ash and caloric value for coal is described.
文摘In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.
