Differential transformation method for studying flow and heat transfer due to stretching sheet embedded in porous medium with variable thickness, variable thermal conductivity,and thermal radiation

This article presents a numerical solution for the flow of a Newtonian fluid over an impermeable stretching sheet embedded in a porous medium with the power law surface velocity and variable thickness in the presence of thermal radiation. The flow is caused by non-linear stretching of a sheet. Thermal conductivity of the fluid is assumed to vary linearly with temperature. The governing partial differential equations （PDEs） are transformed into a system of coupled non-linear ordinary differential equations （ODEs） with appropriate boundary conditions for various physical parameters. The remaining system of ODEs is solved numerically using a differential transformation method （DTM）. The effects of the porous parameter, the wall thickness parameter, the radiation parameter, the thermal conductivity parameter, and the Prandtl number on the flow and temperature profiles are presented. Moreover, the local skin-friction and the Nusselt numbers are presented. Comparison of the obtained numerical results is made with previously published results in some special cases, with good agreement. The results obtained in this paper confirm the idea that DTM is a powerful mathematical tool and can be applied to a large class of linear and non-linear problems in different fields of science and engineering.

A Study on the Effects of Internal Heat Generation on the Thermal Performance of Solid and Porous Fins using Differential Transformation Method

In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.

Mean Square Solutions of Second-Order Random Differential Equations by Using the Differential Transformation Method

The differential transformation method (DTM) is applied to solve the second-order random differential equations. Several examples are represented to demonstrate the effectiveness of the proposed method. The results show that DTM is an efficient and accurate technique for finding exact and approximate solutions.

Application of differential transformation method (DTM) for heat and mass transfer in a porous channel

In the present paper a differential transformation method(DTM)is used to obtain the solution of momentum and heat transfer equations of non-Newtonian fluid flow in an axisymmetric channel with porous wall.The comparison between the results from the differential transfomiation method and numerical method are in well agreement which proofs the capability of this method for solving such problems.After this validity,results are investigated for the velocity and temperature for various values of Reynolds number,Prandtl number and power law index.

On Nonlinear Conformable Fractional Order Dynamical System via Differential Transform Method

This article studies a nonlinear fractional order Lotka-Volterra prey-predator type dynamical system.For the proposed study,we consider the model under the conformable fractional order derivative(CFOD).We investigate the mentioned dynamical system for the existence and uniqueness of at least one solution.Indeed,Schauder and Banach fixed point theorems are utilized to prove our claim.Further,an algorithm for the approximate analytical solution to the proposed problem has been established.In this regard,the conformable fractional differential transform(CFDT)technique is used to compute the required results in the form of a series.Using Matlab-16,we simulate the series solution to illustrate our results graphically.Finally,a comparison of our solution to that obtained for the Caputo fractional order derivative via the perturbation method is given.

Reduced Differential Transform Method for Solving Nonlinear Biomathematics Models

In this paper,we study the approximate solutions for some of nonlinear Biomathematics models via the e-epidemic SI1I2R model characterizing the spread of viruses in a computer network and SIR childhood disease model.The reduced differential transforms method(RDTM)is one of the interesting methods for finding the approximate solutions for nonlinear problems.We apply the RDTM to discuss the analytic approximate solutions to the SI1I2R model for the spread of virus HCV-subtype and SIR childhood disease model.We discuss the numerical results at some special values of parameters in the approximate solutions.We use the computer software package such as Mathematical to find more iteration when calculating the approximate solutions.Graphical results and discussed quantitatively are presented to illustrate behavior of the obtained approximate solutions.

New approximate solution for time-fractional coupled KdV equations by generalised differential transform method

In this paper, the genera]ised two-dimensiona] differentia] transform method （DTM） of solving the time-fractiona] coupled KdV equations is proposed. The fractional derivative is described in the Caputo sense. The presented method is a numerical method based on the generalised Taylor series expansion which constructs an analytical solution in the form of a polynomial. An illustrative example shows that the genera]ised two-dimensional DTM is effective for the coupled equations.

Reduced Differential Transform Method for Solving Linear and Nonlinear Goursat Problem

In this paper a new method for solving Goursat problem is introduced using Reduced Differential Transform Method (RDTM). The approximate analytical solution of the problem is calculated in the form of series with easily computable components. The comparison of the methodology presented in this paper with some other well known techniques demonstrates the effectiveness and power of the newly proposed methodology.

Differential transform method for solving Richards' equation

An approximate solution to Richards＇ equation is presented, mathematically describing a sort of unsaturated single phase fluid flow in porous media. The approach is a differential transform method （DTM） with intermediate variables. Two examples are given to demonstrate the accuracy of the presented solution.

Solving shock wave with discontinuity by enhanced differential transform method(EDTM)

An enhanced differential transform method （EDTM）, which introduces the Pad@ technique into the standard differential transform method （DTM）, is proposed. The enhanced method is applied to the analytic treatment of the shock wave. It accelerates the convergence of the series solution and provides an exact Dower series solution.

AN APPLICATION OF UNGAR’S DIFFERENTIAL TRANSFORM TO ELASTODYNAMICS

In recent years, a lot of writers have used Cagniard-de Hoop's method[1][] to solve some problems of elastic wave. But it is a difficult and complicated task to change the path of integration when we use this method. A differential transform by A.Ungar[3,6] can obviate this difficulty. In this paper, weuse Ungar 's differential transform to solve a case of Lamb's problem [1][2]

The Riccati Equation, Differential Transform, Rational Solutions and Applications

In this article, the Riccati Equation is considered. Various techniques of finding analytical solutions are explored. Those techniques consist mainly of making a change of variable or the use of Differential Transform. It is shown that the nonconstant rational functions whose numerator and denominator are of degree 1, cannot be solutions to the Riccati equation. Two applications of the Riccati equation are discussed. The first one deals with Quantum Mechanics and the second one deal with Physics.

INTEGRABLE TYPES OF NONLINEAR ORDINARY DIFFERENTIAL EQUATION SETS OF HIGHER ORDERS

Because of the extensive applications of nonlinear ordinary differential equation in physics,mechanics and cybernetics,there have been many papers on the exact solution to differential equation in some major publications both at home and abroad in recent years Based on these papers and in virtue of Leibniz formula,and transformation set technique,this paper puts forth the solution to nonlinear ordinary differential equation set of higher-orders, moveover,its integrability is proven.The results obtained are the generalization of those in the references.

On General Mller Transformation

We give a study on the general Moiler transformation and emphatically introduce its differential form. In this paper, a definition of acceleration is given in spacetime language and the inertial reference frame is also settled. With a discussion of the geodesic equations of motion, the differential form of the general MФller transformation at arbitrary direction is presented.

Cooling rate effects on the structure and transformation behavior of Cu-Zn-Al shape memory alloys

Different fragments of a hot-rolled and homogenized Cu–Zn–Al shape memory alloy（SMA） were subjected to thermal cycling by means of a differential scanning calorimetric（DSC） device. During thermal cycling, heating was performed at the same constant rate of increasing temperature while cooling was carried out at different rates of decreasing temperature. For each cooling rate, the temperature decreased in the same thermal interval. During each cooling stage, an exothermic peak（maximum） was observed on the DSC thermogram. This peak was associated with forward martensitic transformation. The DSC thermograms were analyzed with PROTEUS software： the critical martensitic transformation start（Ms） and finish（Mf） temperatures were determined by means of integral and tangent methods, and the dissipated heat was evaluated by the area between the corresponding maximum plot and a sigmoid baseline. The effects of the increase in cooling rate, assessed from a calorimetric viewpoint, consisted in the augmentation of the exothermic peak and the delay of direct martensitic transformation. The latter had the tendency to move to lower critical transformation temperatures. The martensite plates changed in morphology by becoming more oriented and by an augmenting in surface relief, which corresponded with the increase in cooling rate as observed by scanning electron microscopy（SEM） and atomic force microscopy（AFM）.

Application of the Hybrid Differential Transform Method to the Nonlinear Equations

In this paper, a hybrid method is introduced briefly to predict the behavior of the non-linear partial differential equations. The method is hybrid in the sense that different numerical methods, differential transform and finite differences, are used in different subdomains. Our aim of this approach is to combine the flexibility of differential transform and the efficiency of finite differences. An explicit hybrid method for the transient response of inhomogeneous nonlinear partial differential equations is presented;applying finite difference scheme on the fixed grid size is used to approximate the space discretisation, whereas the differential transform method is used for time operator. Comparison of the efficiency of the different approaches is a very important aspect of this study. In our test cases, the hybrid approach is faster than the corresponding highly optimized finite difference method in two dimensional computations. We compared our hybrid approach’s results with the exact and/or numerical solutions of PDE which obtained from Adomian Decomposition Method. Results show that the hybrid approach may be an important tool to reduce the execution time and memory requirements for large scale computations and get remarkable results in predicting the solutions of nonlinear initial value problems.

Theory and Semi-Analytical Study of Micropolar Fluid Dynamics through a Porous Channel

In this work,We are looking at the characteristics of micropolar flow in a porous channel that’s being driven by suction or injection.The working of the fluid is described in the flowmodel.We can reduce the governing nonlinear partial differential equations(PDEs)to a model of coupled systems of nonlinear ordinary differential equations using similarity variables(ODEs).In order to obtain the results of a coupled system of nonlinear ODEs,we discuss a method which is known as the differential transform method(DTM).The concern transform is an excellent mathematical tool to obtain the analytical series solution to the nonlinear ODEs.To observe beast agreement between analytical method and numerical method,we compare our result with the Rung-Kutta method of order four(RK4).We also provide simulation plots to the obtained result by using Mathematica.Onthese plots,we discuss the effect of different parameters which arise during the calculation of the flow model equations.

Bifurcation and Chaos Analysis of Nonlinear Rotor System with Axial-grooved Gas-lubricated Journal Bearing Support

Axial-grooved gas-lubricated journal bearings have been widely applied to precision instrument due to their high accuracy, low friction, low noise and high stability. The rotor system with axial-grooved gas-lubricated journal bearing support is a typical nonlinear dynamic system. The nonlinear analysis measures have to be adopted to analyze the behaviors of the axial-grooved gas-lubricated journal bearing-rotor nonlinear system as the linear analysis measures fail. The bifurcation and chaos of nonlinear rotor system with three axial-grooved gas-lubricated journal bearing support are investigated by nonlinear dynamics theory. A time-dependent mathematical model is established to describe the pressure distribution in the axial-grooved compressible gas-lubricated journal bearing. The time-dependent compressible gas-lubricated Reynolds equation is solved by the differential transformation method. The gyroscopic effect of the rotor supported by gas-lubricated journal bearing with three axial grooves is taken into consideration in the model of the system, and the dynamic equation of motion is calculated by the modified Wilson-0-based method. To analyze the unbalanced responses of the rotor system supported by finite length gas-lubricated journal bearings, such as bifurcation and chaos, the bifurcation diagram, the orbit diagram, the Poincar6 map, the time series and the frequency spectrum are employed. The numerical results reveal that the nonlinear gas film forces have a significant influence on the stability of rotor system and there are the rich nonlinear phenomena, such as the periodic, period-doubling, quasi-periodic, period-4 and chaotic motion, and so on. The proposed models and numerical results can provide a theoretical direction to the design of axial-grooved gas-lubricated journal bearing-rotor system.

Kerosene-alumina nanofluid flow and heat transfer for cooling application

Kerosene-alumina nanofluid flow and heat transfer in the presence of magnetic field are studied. The basic partial differential equations are reduced to ordinary differential equations which are solved semi analytically using differential transformation method. Velocity and temperature profiles as well as the skin friction coefficient and the Nusselt number are determined analytically. The influence of pertinent parameters such as magnetic parameter, nanofluid volume fraction, viscosity parameter and Eckert number on the flow and heat transfer characteristics is discussed. Results indicate that skin friction coefficient decreases with increase of magnetic parameter, nanofluid volume fraction and viscosity parameter. Nusselt number increases with increase of magnetic parameter and nanofluid volume fraction while it decreases with increase of Eckert number and viscosity parameter.

Generalized covariant differentiation and axiom-based tensor analysis

This paper reports the new progresses in the axiomatization of tensor anal- ysis, including the thought of axiomatization, the concept of generalized components, the axiom of covariant form invariability, the axiomatized definition, the algebraic structure, the transformation group, and the simple calculation of generalized covariant differentia- tions. These progresses strengthen the tendency of the axiomatization of tensor analysis.