PZT-based valveless micropump is a microactuator that can be used for controlling and delivering tiny amounts of fluids,and diffuser/nozzle plays an important role when this type of micropump drives the fluid flowing ...PZT-based valveless micropump is a microactuator that can be used for controlling and delivering tiny amounts of fluids,and diffuser/nozzle plays an important role when this type of micropump drives the fluid flowing along a specific direction.In this paper,a numerical model of micropump has been proposed,and the fluidic properties of diffuser/nozzle have been simulated with ANSYS.With the method of finite-element analysis,the increased pressure drop between inlet and outlet of diffuser/nozzle induces the increment of flow rate in both diffuser and nozzle simultaneously,but the increasing rate of diffuser is faster than that of nozzle.The L/R,ratio of L(length of cone pipe) and R(radius of minimal cross section of cone pipe) plays an important role in fluidic performance of diffuser and nozzle as well,and the mean flow rate will decrease with increment of L/R.The mean flow rate reaches its peak value when L/R with the value of 10 regardless the divergence angle of diffuser or nozzle.The simulation results indicate that the fluidic properties of diffuser/nozzle can be defined by its geometric structure,and accordingly determine the efficiency of micropump.展开更多
Slot nozzle and intensive nozzle can be used in ultra fast cooling equipment. The spray cooling method with higher water pressure can be taken in order to achieve ultra fast cooling for hot rolled strip. Water will be...Slot nozzle and intensive nozzle can be used in ultra fast cooling equipment. The spray cooling method with higher water pressure can be taken in order to achieve ultra fast cooling for hot rolled strip. Water will be diffused after it is sprayed out from ultra fast cooling nozzle. Spray diffusivity will affect water velocity and penetrability of water into residual water layer on top of the strip,and then it will affect strip cooling effect. Water spraying process can be simulated by Fluent and some conclusions were obtained. Slot nozzle width and outlet velocity within setting range could not affect the length of potential core zone and the spray diffusivity. Intensive nozzle diameter and outlet velocity will affect the length of potential core zone and the spray diffusivity with different extent. These conclusions will provide referenced role for confirming ultra fast cooling nozzle size and distance between ultra fast cooling nozzle and hot rolled strip.展开更多
Many researches on critical nozzles have been performed to accurately measure the mass flow rate of gas flow,and to standardize the performance as a flow meter.Recently,much interest is being paid on the measurement o...Many researches on critical nozzles have been performed to accurately measure the mass flow rate of gas flow,and to standardize the performance as a flow meter.Recently,much interest is being paid on the measurement of very small mass flow rate in industry fields such as MEMS applications.However,the design and performance data of the critical nozzles obtained so far have been applied mainly to the critical nozzles with comparatively large diameters,and the works available on miniature critical nozzles are lacking.In the present study,a computational fluid dynamics method has been applied to investigate the influence of the diffuser angle on discharge coefficient of the miniature critical nozzles.In computations,the throat diameter of critical nozzle is varied from 0.2 mm to 5.0 mm and the diffuser angle is changed from 2 deg to 8 deg.The computational results are validated with some experimental data available.The results show that the present computational results predict appropriately the discharge coefficient of the gas flows through miniature critical nozzles.It is known that the discharge coefficient is considerably influenced by the diffuser angle,as the throat diameter of nozzle becomes small below a certain value.This implies that the miniature critical nozzles should be carefully designed.展开更多
A valveless micropump actuated by thermal bubbles which are generated by an electrode heater mounted with a pair of diffuser nozzles has been numerically studied by commercial CFD software FLUENT. The relationships be...A valveless micropump actuated by thermal bubbles which are generated by an electrode heater mounted with a pair of diffuser nozzles has been numerically studied by commercial CFD software FLUENT. The relationships between the net flow rate and the superheating and heat supplying frequency have been investigated. The depth of the diffuser-nozzle micropump is 200 μm, the diameter of the actuating chamber is 1 mm, and a pair of diffuser nozzles whose gap has been expanded from 30 μm to 274 μm with an open angle of 7° are connected to the actuating chamber. The working fluid is methanol. In the numerical simulation, the flow pattern is laminar. The results show that the pump has different optimal driving frequencies at different superheating. A cycle resulting from bubble growth and shrinking costs more time at higher superheating temperature; different superheating has different optimal driving frequency; when the superheating increases, the maximum volume flow rate and the maximum pump pressure will increase simultaneously, and the optimal driving frequency decreases as well, the maximum volume flow rate and pump pressure also have the same tendency; in the condition of uncontrolled condensing, the bubble shrinking process is longer than the growth process, thus it is the determining factor to affect the pump performance. The maximum volume flow rate is 9.02 μL/min at ΔT = 15°C, and the maximum pump pressure is 680 Pa. With the increase of wall superheat, cycle including the bubble growth and condensation will become longer, resulting in a significant impact on the pumping flow; different wall superheat has different optimized frequency, increasing superheat will bring increased pumping flow and pump pressure, the optimized driving frequency will be reduced; liquid supply phase is longer than pumping phase.展开更多
This paper presents a three-dimensional flow field simulation of the steady flows through diffusers and nozzles with straight or serrated-sided walls to analyze the effect of the channel structure on the flow characte...This paper presents a three-dimensional flow field simulation of the steady flows through diffusers and nozzles with straight or serrated-sided walls to analyze the effect of the channel structure on the flow characteristics.The pressure and velocity profiles in the diffusers and the nozzles as well as the net volumetric flow rate are determined.Our simulation demonstrates that the pressure and velocity profiles in the serrated diffuser/nozzles are more complicated than those with the straight-sided wall,while the net steady flow rate with the straight-sided wall increases monotonically with the increase of the pressure difference,the steady flow rate with serrated sided walls increases gradually to reach a maximum and then decreases with the increase of the pressure difference.The results suggest that the number of the sawteeth plays a significant role in optimizing the design of serrated diffusers and nozzles for improving the transport efficiency of valveless micro-pumps.展开更多
基金Supported by′111′Project and Chongqing Natural Science Foundation(2006BB2043,2006BB2142)
文摘PZT-based valveless micropump is a microactuator that can be used for controlling and delivering tiny amounts of fluids,and diffuser/nozzle plays an important role when this type of micropump drives the fluid flowing along a specific direction.In this paper,a numerical model of micropump has been proposed,and the fluidic properties of diffuser/nozzle have been simulated with ANSYS.With the method of finite-element analysis,the increased pressure drop between inlet and outlet of diffuser/nozzle induces the increment of flow rate in both diffuser and nozzle simultaneously,but the increasing rate of diffuser is faster than that of nozzle.The L/R,ratio of L(length of cone pipe) and R(radius of minimal cross section of cone pipe) plays an important role in fluidic performance of diffuser and nozzle as well,and the mean flow rate will decrease with increment of L/R.The mean flow rate reaches its peak value when L/R with the value of 10 regardless the divergence angle of diffuser or nozzle.The simulation results indicate that the fluidic properties of diffuser/nozzle can be defined by its geometric structure,and accordingly determine the efficiency of micropump.
基金State"1025"Science and Technology Support Projects,China(No.2012BAF04B01)
文摘Slot nozzle and intensive nozzle can be used in ultra fast cooling equipment. The spray cooling method with higher water pressure can be taken in order to achieve ultra fast cooling for hot rolled strip. Water will be diffused after it is sprayed out from ultra fast cooling nozzle. Spray diffusivity will affect water velocity and penetrability of water into residual water layer on top of the strip,and then it will affect strip cooling effect. Water spraying process can be simulated by Fluent and some conclusions were obtained. Slot nozzle width and outlet velocity within setting range could not affect the length of potential core zone and the spray diffusivity. Intensive nozzle diameter and outlet velocity will affect the length of potential core zone and the spray diffusivity with different extent. These conclusions will provide referenced role for confirming ultra fast cooling nozzle size and distance between ultra fast cooling nozzle and hot rolled strip.
文摘Many researches on critical nozzles have been performed to accurately measure the mass flow rate of gas flow,and to standardize the performance as a flow meter.Recently,much interest is being paid on the measurement of very small mass flow rate in industry fields such as MEMS applications.However,the design and performance data of the critical nozzles obtained so far have been applied mainly to the critical nozzles with comparatively large diameters,and the works available on miniature critical nozzles are lacking.In the present study,a computational fluid dynamics method has been applied to investigate the influence of the diffuser angle on discharge coefficient of the miniature critical nozzles.In computations,the throat diameter of critical nozzle is varied from 0.2 mm to 5.0 mm and the diffuser angle is changed from 2 deg to 8 deg.The computational results are validated with some experimental data available.The results show that the present computational results predict appropriately the discharge coefficient of the gas flows through miniature critical nozzles.It is known that the discharge coefficient is considerably influenced by the diffuser angle,as the throat diameter of nozzle becomes small below a certain value.This implies that the miniature critical nozzles should be carefully designed.
基金Supported by the National Natural Science Foundation of China (Grant No. 50406012)
文摘A valveless micropump actuated by thermal bubbles which are generated by an electrode heater mounted with a pair of diffuser nozzles has been numerically studied by commercial CFD software FLUENT. The relationships between the net flow rate and the superheating and heat supplying frequency have been investigated. The depth of the diffuser-nozzle micropump is 200 μm, the diameter of the actuating chamber is 1 mm, and a pair of diffuser nozzles whose gap has been expanded from 30 μm to 274 μm with an open angle of 7° are connected to the actuating chamber. The working fluid is methanol. In the numerical simulation, the flow pattern is laminar. The results show that the pump has different optimal driving frequencies at different superheating. A cycle resulting from bubble growth and shrinking costs more time at higher superheating temperature; different superheating has different optimal driving frequency; when the superheating increases, the maximum volume flow rate and the maximum pump pressure will increase simultaneously, and the optimal driving frequency decreases as well, the maximum volume flow rate and pump pressure also have the same tendency; in the condition of uncontrolled condensing, the bubble shrinking process is longer than the growth process, thus it is the determining factor to affect the pump performance. The maximum volume flow rate is 9.02 μL/min at ΔT = 15°C, and the maximum pump pressure is 680 Pa. With the increase of wall superheat, cycle including the bubble growth and condensation will become longer, resulting in a significant impact on the pumping flow; different wall superheat has different optimized frequency, increasing superheat will bring increased pumping flow and pump pressure, the optimized driving frequency will be reduced; liquid supply phase is longer than pumping phase.
基金the National Natural Science Foundation of China(Grant Nos.61376115,11672065).
文摘This paper presents a three-dimensional flow field simulation of the steady flows through diffusers and nozzles with straight or serrated-sided walls to analyze the effect of the channel structure on the flow characteristics.The pressure and velocity profiles in the diffusers and the nozzles as well as the net volumetric flow rate are determined.Our simulation demonstrates that the pressure and velocity profiles in the serrated diffuser/nozzles are more complicated than those with the straight-sided wall,while the net steady flow rate with the straight-sided wall increases monotonically with the increase of the pressure difference,the steady flow rate with serrated sided walls increases gradually to reach a maximum and then decreases with the increase of the pressure difference.The results suggest that the number of the sawteeth plays a significant role in optimizing the design of serrated diffusers and nozzles for improving the transport efficiency of valveless micro-pumps.
文摘依据扩散口/喷嘴理论,设计了具有单向整流特性的无阀微泵.采用硅平面工艺、各向异性腐蚀、削角补偿和静电键合等微机械加工工艺技术,制作了平面尺寸为18 mm×13 mm的无阀微泵.经过测试,当扩散口/喷嘴长度为2.5μm、扩散口/喷嘴的窄口宽度为150μm、腐蚀深度为150μm时,微泵的最大泵压达14.8 kPa,最大流量为558μL/m in.
