The static model for metal matrix composites in diffusion welding was established by means of artificial neural network method. The model presents the relationship between weld joint properties and welding parameters ...The static model for metal matrix composites in diffusion welding was established by means of artificial neural network method. The model presents the relationship between weld joint properties and welding parameters such as welding temperature, welding pressure and welding time. Through simulating the diffusion welding process of SiC w/6061Al composite, the effects of welding parameters on the strength of welded joint was studied and optimal technical parameters was obtained. It is proved that this method has good fault tolerant ability and versatility and can overcome the shortage of the general experiment. The established static model is in good agreement with the actual welding process, so it becomes a new path for studying the weldability of new material.展开更多
Microstructure and alloy element distribution in the welded joint between austenitic stainless steel (1Cr18Ni9Ti) and pearlitic heat-resistant steel (lCr5Mo) were researched by means of light microscopy, scanning elec...Microstructure and alloy element distribution in the welded joint between austenitic stainless steel (1Cr18Ni9Ti) and pearlitic heat-resistant steel (lCr5Mo) were researched by means of light microscopy, scanning electron microscopy (SEM) and electron probe microanalysis (EPMA). Microstructure, divisions of the fusion zone and elemental diffusion distributions in the welded joints were investigated. Furthermore, solidification microstructure and &-ferrite distribution in the weld metal of these steels are also discussed.展开更多
文摘The static model for metal matrix composites in diffusion welding was established by means of artificial neural network method. The model presents the relationship between weld joint properties and welding parameters such as welding temperature, welding pressure and welding time. Through simulating the diffusion welding process of SiC w/6061Al composite, the effects of welding parameters on the strength of welded joint was studied and optimal technical parameters was obtained. It is proved that this method has good fault tolerant ability and versatility and can overcome the shortage of the general experiment. The established static model is in good agreement with the actual welding process, so it becomes a new path for studying the weldability of new material.
基金The work was supported by the Foundation of KeyLaboratory of Liquid Structure and Heredity of Materi-als, Ministry of Educat
文摘Microstructure and alloy element distribution in the welded joint between austenitic stainless steel (1Cr18Ni9Ti) and pearlitic heat-resistant steel (lCr5Mo) were researched by means of light microscopy, scanning electron microscopy (SEM) and electron probe microanalysis (EPMA). Microstructure, divisions of the fusion zone and elemental diffusion distributions in the welded joints were investigated. Furthermore, solidification microstructure and &-ferrite distribution in the weld metal of these steels are also discussed.
