The 2D digital simplified flow valve is composed of a pilot-operated valvedesigned with both rotary and linear motions of a single spool, and a stepper motor under continualcontrol. How the structural parameters affec...The 2D digital simplified flow valve is composed of a pilot-operated valvedesigned with both rotary and linear motions of a single spool, and a stepper motor under continualcontrol. How the structural parameters affect the static and dynamic characteristics of the valve isfirst clarified and a criterion for stability is presented. Experiments are designed to test theperformance of the valve. It is necessary to establish a balance between the static and dynamiccharacteristics in deciding the structural parameters. Nevertheless, it is possible to maintain thedynamic response at a fairly high level, while keeping the leakage of the pilot stage at anacceptable level. One of the features of the digital valve is stage control. In stage control thenonlinearities, such as electromagnetic saturation and hysteresis, are greatly reduced. To a largeextent the dynamic response of the valve is decided by the executing cycle of the control algorithm.展开更多
Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow ...Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.展开更多
Data pre-deployment in the HDFS （Hadoop distributed file systems） is more complicated than that in traditional file systems. There are many key issues need to be addressed, such as determining the target location of...Data pre-deployment in the HDFS （Hadoop distributed file systems） is more complicated than that in traditional file systems. There are many key issues need to be addressed, such as determining the target location of the data prefetching, the amount of data to be prefetched, the balance between data prefetching services and normal data accesses. Aiming to solve these problems, we employ the characteristics of digital ocean information service flows and propose a deployment scheme which combines input data prefetching with output data oriented storage strategies. The method achieves the parallelism of data preparation and data processing, thereby massively reducing I/O time cost of digital ocean cloud computing platforms when processing multi-source information synergistic tasks. The experimental results show that the scheme has a higher degree of parallelism than traditional Hadoop mechanisms, shortens the waiting time of a running service node, and significantly reduces data access conflicts.展开更多
To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communitie...To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.展开更多
In this paper, the accuracy of estimating stained non-wetting phase saturation using digital image processing is examined, and a novel post-processing approach for calculating threshold is presented. In order to remov...In this paper, the accuracy of estimating stained non-wetting phase saturation using digital image processing is examined, and a novel post-processing approach for calculating threshold is presented. In order to remove the effect of the background noise of images and to enhance the high-frequency component of the original image, image smoothing and image sharpening methods are introduced. Depending on the correct threshold, the image binarization processing is particularly useful for estimating stained non-wetting phase saturation. Calculated saturation data are compared with the measured saturation data during the two-phase flow experiment in an artificial steel planar porous media model. The results show that the calculated saturation data agree with the measured ones. With the help of an artificial steel planar porous media model, digital image processing is an accurate and simple method for obtaining the stained non-wetting phase saturation.展开更多
基金This project is supported by National Natural Science Foundation of China (No.50075082).
文摘The 2D digital simplified flow valve is composed of a pilot-operated valvedesigned with both rotary and linear motions of a single spool, and a stepper motor under continualcontrol. How the structural parameters affect the static and dynamic characteristics of the valve isfirst clarified and a criterion for stability is presented. Experiments are designed to test theperformance of the valve. It is necessary to establish a balance between the static and dynamiccharacteristics in deciding the structural parameters. Nevertheless, it is possible to maintain thedynamic response at a fairly high level, while keeping the leakage of the pilot stage at anacceptable level. One of the features of the digital valve is stage control. In stage control thenonlinearities, such as electromagnetic saturation and hysteresis, are greatly reduced. To a largeextent the dynamic response of the valve is decided by the executing cycle of the control algorithm.
基金Institute of Hydrocarbon Recovery, Universiti Teknology PETRONAS and Petroliam Nasional Berhad, Malaysia Oil and Gas Company for funding this research project (YUTP cost # 0153AA-E79)
文摘Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.
基金The Ocean Public Welfare Scientific Research Project of State Oceanic Administration of China under contract No.20110533
文摘Data pre-deployment in the HDFS （Hadoop distributed file systems） is more complicated than that in traditional file systems. There are many key issues need to be addressed, such as determining the target location of the data prefetching, the amount of data to be prefetched, the balance between data prefetching services and normal data accesses. Aiming to solve these problems, we employ the characteristics of digital ocean information service flows and propose a deployment scheme which combines input data prefetching with output data oriented storage strategies. The method achieves the parallelism of data preparation and data processing, thereby massively reducing I/O time cost of digital ocean cloud computing platforms when processing multi-source information synergistic tasks. The experimental results show that the scheme has a higher degree of parallelism than traditional Hadoop mechanisms, shortens the waiting time of a running service node, and significantly reduces data access conflicts.
基金supported by the Crisis Management division of Toho village, and JSPS KAKENHI Grant Number (18K04660)
文摘To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.
基金supported by the National Natural Science Foundation of China(Grant No51079043)the Special Fund for Public Welfare Industry of Ministry of Water Resources of China(Grants No200901064 and 201001020)the Research Innovation Program for College Graduates of Jiangsu Province(Grant No CXZZ11_0450)
文摘In this paper, the accuracy of estimating stained non-wetting phase saturation using digital image processing is examined, and a novel post-processing approach for calculating threshold is presented. In order to remove the effect of the background noise of images and to enhance the high-frequency component of the original image, image smoothing and image sharpening methods are introduced. Depending on the correct threshold, the image binarization processing is particularly useful for estimating stained non-wetting phase saturation. Calculated saturation data are compared with the measured saturation data during the two-phase flow experiment in an artificial steel planar porous media model. The results show that the calculated saturation data agree with the measured ones. With the help of an artificial steel planar porous media model, digital image processing is an accurate and simple method for obtaining the stained non-wetting phase saturation.
