Generation of Optimal Voltage Reference for Limit Cycle Oscillation in Digital Control-Based Switching Power Supply

Digital control of a general-purpose switching power supply is one of the key technologies to perform the high reliability and the intelligent function demanded for the next generation. The contribution of this paper is the development of a digital control-based switching power supply. In the developed system, the generation method of the optimal voltage reference to eliminate the limit cycle oscillation of output voltage due to the AD/DA resolution is proposed. In the proposed method, the variation of the input power source voltage can be also compensated. The effectiveness of the proposed optimal reference generation method is experimentally verified.

A novel testing approach for SSRF digital power supply controllers

Digital power supply controller is one of the key parts of SSRF high resolution high stability magnet power supply system. It is very essential to keep any degradation of these excellent properties by any stages as small as possible via careful testing when the controller is developed. In this study,a novel testing approach was presented,with which a novel closed control loop without actual power converter was constructed,and the new developed SSRF Digital Controller can work well in it.

Simulation realization of skip cycle mode integrated control circuit in the switching power supply with low standby loss

This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.

High-power High-efficient and Simplified High-frequency Switching Power Supply for Electrolytic Plating

针对大功率电解电镀开关电源的输入整流级引起的无功和谐波等电能质量问题,研究了一种基于高效PWM整流的高频开关电源。该电源前级整流器仅用4个开关管来进行PWM整流,后级采用半桥逆变器进行高频变换,显著减少了开关数量。针对三相四开关PWM整流器,推导一种基于开关模型的无差拍控制方法,该方法可实现系统的快速、无差整流。针对多台开关电源的并联均流问题,提出一种基于虚拟阻抗的自均流控制方法,可实现多台电源的均流稳定运行。通过仿真与实验验证了所提结构和控制方法的正确性。

Development of Full Automatic Flash Butt Welding with Digital Control

The hardware and software design of two digital control systems based on 80C196KB MCU for flash butt welder is introduced in this paper.The welding power supply is made of six-phase half-wave rectifier.The welding outer characteristic of welding machine is realized by digital PI algorithm with the voltage close-loop feedback.The flashing curve is finished by elec- tric-hydraulic servo valve.The process control system transfers datum with power supply system by a serial communication inter- face.The parameters of the control systems are collected by photoelectrical seclusion to avoid the disturbing of the electromagnetism in welding process.

Air-Water Cooling System for Switch-Mode Power Supplies

The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by high power and high compactness, thereby making the standard cooling techniques difficult to be used, a new cooling system is developed, using water and air as the cooling media. The active components (MOSFETs) are cooled with a liquid cold-plate, the passive ones (condensers, transformers, coils) with an air flow, in turn cooled by the cold-plate. By inserting the cooling system in an experimental tool where it is possible to control the cooling water, measurements are made of temperature in the significant points of the SMPS. The electric efficiency is also measured. The evaluation of the thermal performance of this cooling system is useful in order to limit its maximum operational temperature. The efficacy of the cooling system is demonstrated;the trends of efficiency and power dissipation are evidenced.

Design and Simulation of a Electrorheological(ER) Control High Voltage Power Supply

Few applications with electrorheological （ER） fluids have been found in industry. One reason is high voltage power supplies cannot meet the requirement for ER effect. In this paper, an ER control high voltage power supply for engineering application was designed which reduced power wastage by adopting soft switch technology; lessened its volume to satisfy micromation when adopting the planar transformer and improved its response character- istic by choosing an assistant discharging circuit. Simultaneously, a simulation analysis has been carried out. As results, the output voltage of this high voltage power supply is 5 kV, and the voltage can be continuously regulated and the voltage ripple is only 0. 7 %, so the requirement of stability is also achieved.

Development of 8 MW Power Supply Based on Pulse Step Modulation Technique for Auxiliary Heating System on HL-2A

The high voltage power supply （HVPS） based on pulse step modulation （PSM） has already been developed for the auxiliary heating system on HL-2A. This power supply consists of many switch power supplies, and its output voltage can be obtained by modulating their delay time and pulse widths. The PSM topology and control principle are presented in this paper. The simple algorithms for the control system are explained clearly. The switch power supply （SPS） module has been built and the test results show it can meet the requirements of the auxiliary heating system. Now, 112 SPS modules and the whole system have already been developed. Its maximum output is about 72 kV/93 A. The protection time is less than 5 t＊s. The different outputs of this power supply are used for the electron cyclotron resonant heating （ECRH） system with different duty ratios. The experimental results of the entire system are presented. The results indicate that the whole system can meet the requirements of the auxiliary heating system on HL-2A.

A comparative study of digital low dropout regulators

Granular power management in a power-efficient system on a chip(SoC)requires multiple integrated voltage regulators with a small area,process scalability,and low supply voltage.Conventional on-chip analog low-dropout regulators(ALDOs)can hardly meet these requirements,while digital LDOs(DLDOs)are good alternatives.However,the conventional DLDO,with synchronous control,has inherently slow transient response limited by the power-speed trade-off.Meanwhile,it has a poor power supply rejection(PSR),because the fully turned-on power switches in DLDO are vulnerable to power supply ripples.In this comparative study on DLDOs,first,we compare the pros and cons between ALDO and DLDO in general.Then,we summarize the recent DLDO advanced techniques for fast transient response and PSR enhancement.Finally,we discuss the design trends and possible directions of DLDO.

Design of digital controller for HEPS corrector power supply

Purpose In order to realize the control of current closed loop in HEPS corrector power supply,a digital control board is designed.Methods The control board uses the latest FPGA to realize digital processing and uses two different AD chips to realize current and voltage sampling,respectively.In order to achieve high-precision closed-loop control,an effective closed-loop control program is designed.Results The controller has been widely used in HEPS projects,and its control effect has been proved.Conclusions In order to realize control and reduce power cost,the controller is designed.The testing experiments show that the controller has excellent performance,reliable operation and low cost.

TOPSwitch器件在电源中的应用

采用 PWM 控制器和 MOSFET 功率开关一体化的集成控制芯片是新一代开关电源设计的重要特点和趋势。本文介绍美国功率集成公司(Power Integrations Inc.)于九十年代中期研制推出的三端 PWM/MOSFET 二合一集成控制器件 TOPSwitch 系列及其在开关电源设计中的应用,同时介绍如何应用 EXCEL 电子表格设计与 TOPSwitch 相匹配的高频功率变压器的程序。

TOPSwitch-FX系列单片开关电源控制电路的设计

TOPSwitch-FX系列是国外最新研制的高性价比单片开关电源集成电路,文中重点阐述其多功能端的电路设计以及由微控制器控制的开关电源工作原理。

基于TOPSwitch-GX远程监控开关电源的设计

介绍了一种基于TOPswitch-GX单片开关电源的设计方法。实现了一个240W的开关电源, 并对该电源的电压、电流、温度等参数实现了远程监控。

Study of Sliding Mode Control of DC-DC Buck Converter

In this paper, a robust sliding mode controller for the control of dc-dc buck converter is designed and analyzed. Dynamic equations describing the buck converter are derived and sliding mode controller is designed. A two-loop control is employed for a buck converter. The robustness of the sliding mode controlled buck converter system is tested for step load changes and input voltage variations. The theoretical predictions are validated by means of simulations. Matlab/Simulink is used for the simulations. The simulation results are presented. The buck converter is tested with operating point changes and parameter uncertainties. Fast dynamic response of the output voltage and robustness to load and input voltage variations are obtained.

复合PWM/MOSFET单片电路TOPSwitch-GX系列的特性及应用

2000年11月推出的TOPSwitch-GX系列TOP242～249,是具有4个～6个引出脚的复合PWM/MOSFET单片IC开关电源控制器,它具有扩展功率、设计灵活、电子控制智能化、外部可调的精确电流限制(高效低成本)、更宽的占空比控制、Y封装具有独立的电网检测与电流限制等特性。

Research on the application of digital power supply based on domestic FPGA

Purpose The digital controller for the accelerator magnet power supply typically employs a field-programmable gate array(FPGA)as the signal processing chip for executing digital processing of closed-loop control.Currently,FPGA chips are predominantly utilized in Intel or Xilinx products.To address the“key areas and stranglehold”issue pertaining to FPGA chips in accelerator power supply,we have devised a digital power supply prototype using a domestic FPGA chip and validated its feasibility in the upgrade project’s magnet power supply digital transformation plan for the Beijing Electron Positron Collider(BEPCII).Method A domestic FPGA chip from the Seal5000 SA5Z-30-D1 series by Xi’an ZhiDuoJing Microelectronics Co.serves as the core component for the design of a digital corrector magnet power supply to replace the existing analog controlled corrector power supply at BEPCII.The power supply’s digital control of the closed loop is achieved through the use of a hardware description language,and the digital controller hardware is constructed based on the original power supply power topology.Results and conclusions After conducting experiments and tests on the power supply prototype,we have successfully met the current operational requirements of the BEPCII corrector power supply,thus confirming the feasibility of utilizing domestic FPGA for digital application on accelerator power supply.

Design and Implementation of Smart Power Voltage and Frequency Synchroniser in Power Distribution System

Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.

TinySwitch~-Ⅱ系列高性能单片开关电源控制器 IC 的性能及应用(1)

TinySwitch-Ⅱ系列 TNY264～268IC 是智能型多控制功率的开关电源控制器件,其综合性能与成本超过前几代。本文介绍该系列电路的性能及应用。

局部干法水下快频脉冲MIG焊电源研制

针对复杂水下环境焊接过程对焊接电源超高动特性与精确控制需求,设计基于SiC模块的快频脉冲焊接电源功率主电路,开发全数字化控制系统,研制出局部干法水下快频脉冲MIG焊电源(local dry underwater fastfrequency pulsed MIG,LDU-FFPMIG).研制的LDU-FFPMIG焊接电源额定输出电流为400 A,能精确输出多种0~30 kHz的快频脉冲电流波形,快频脉冲电流幅值高达200 A.提出LDU-FFPMIG焊接新工艺,将快频脉冲应用到304不锈钢局部干法水下MIG焊接,探究快频脉冲对传统局部干法水下脉冲MIG焊的影响.结果表明,研制的LDU-FFPMIG焊接电源能够实现稳定的局部干法水下MIG焊,可获得良好的焊缝成形;快频脉冲电流的引入可显著提高电弧能量密度和焊接稳定性,减小熔宽(B)、增大熔深(H),焊缝成形系数(B/H)减小约30%,并且可以细化晶粒.

TinySwitch^( )-Ⅱ系列高性能单片开关电源控制器IC的性能及应用(2)

TinySwitch-Ⅱ系列TNY264～268 IC是智能型多控制功率的开关电源控制器件,其综合性能与成本超过前几代。本文介绍该系列电路的性能及应用。