In the practical use for the production of the α-olefins, it is highly desired to develop a novel heterogeneous catalyst system. The metal complexes immobilized into the clay interlayers show a great potential as het...In the practical use for the production of the α-olefins, it is highly desired to develop a novel heterogeneous catalyst system. The metal complexes immobilized into the clay interlayers show a great potential as heterogeneous catalysts due to their excellent processability. In this study, nine types of heterogeneous procatalyst Ln/Ni2+-micas were synthesized via a one-pot preparation method, which includes both the condensation reaction of the ligand derivatives and the intercalation of the ligands into the Ni2+ ion-exchanged fluorotetrasilicic mica interlayer. The ligand structures of the prepared procatalysts were [Ln: R-N = C(Nap)-C(Nap) = N-R] [(Nap = 1,8-naphthdiyl) (L1, R = 2-MePh;L2, R = 2-FPh;L3, R = 2-BrPh;L4, R = 4-MePh;L5, R = 4-FPh;L6, R = 4-BrPh;L7, R = 2,4-F2Ph;L8, R = 2,4-Br2Ph;L9, R = 2,6-F2Ph). At 50℃ and 0.7 MPaethylene pressure, the triisobutylaluminum-activated L1-L6/Ni2+-mica showed a catalytic activity for the ethylene oligo-/polymerization in the range of 334 - 549 g-ethylene•g-cat–1•h–1. A high catalyst activity was obtained when the substituent having a larger steric bulk than that of a methyl substituent was introduced at the ortho-position of the aryl rings. The introduction of the fluorine substituent as a strong electron-withdrawing group to the para-position also increased the catalytic activity. The L2, L4, L5, and L6/Ni2+-micas showed moderate selectivities to oligomers consisting of C4-C20 in the range of 19.9 - 41.6 wt% at 50℃. The calculated Schulz-Flory constants α based on the mole fraction of C12 and C14 were within 0.61 - 0.78.展开更多
A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}d...A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}dibromo- nickel were successfully synthesized, and characterized by 1H NMR, 13C NMR, Fourier transform infrared spectroscope（FTIR）, elemental analysis and X-ray photoelectron spectroscopy（XPS）. α-Diimine ligand 1b, bis[N,N′-（2,6- dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2b, {bis[N,N′-（2,6-dimethyl- phenyl）imino]-2,3-butanediylidene}dibromonickel were also synthesized and characterized for comparison. The pre-catalyst 2a with sterically bulky, electron-donating group tert-butyl, activated by diethylaluminum chloride （DEAC） and tested in the polymerization of ethylene, was very highly active[2.01×107 g PE/（mol Ni？h？0.1 MPa）] and led to a very highly branched polyethylene（ca. 35―103 branches/1000 C）. The state of the polyethylene obtained varied from plastic, elastomer polymers to the oil-like hyperbranched polymers.展开更多
Naphthyl-α-diimine nickel complexes with systematically varied ligand sterics, activated by modified methylaluminoxane（MMAO）, were tested in the polymerization of higher α-olefin（1-hexene, 1-decene and 1-hexadec...Naphthyl-α-diimine nickel complexes with systematically varied ligand sterics, activated by modified methylaluminoxane（MMAO）, were tested in the polymerization of higher α-olefin（1-hexene, 1-decene and 1-hexadecene） under suitable conditions. The polymerization results indicated the possibility of precise microstructure control, depending on catalyst structure, polymerization temperature, monomer concentration and types of monomers, which in turn strongly affects the resultant polymer properties. Naphthyl-α-diimine nickel complex bearing chiral bulky sec-phenethyl groups in the o-naphthyl position showed good catalytic activity, and resulted in branched polymers（42-88/1000 C） with high molecular weights（Mn：（4.3-15.2） × 10^4 g·mol^-1） and narrow molecular weight distribution（Mw/Mn = 1.13-1.29, RT）, which suggested a living polymerization. The increasing steric hindrance of catalyst leads to enhance insertion for 2,1-insertion of α-olefin and the chain-walking reaction.展开更多
Bis （4-（4-amino-3, 5-diethylbenzyl）-2, 6-diethylphenylimino） acenaphthene] di- chloronickel （NiLCl2） was prepared and supported on SiO2 modified by methyl trichlorsilane（S-1） and on SiO2-MgCl2/TiCl4 （S-2） re...Bis （4-（4-amino-3, 5-diethylbenzyl）-2, 6-diethylphenylimino） acenaphthene] di- chloronickel （NiLCl2） was prepared and supported on SiO2 modified by methyl trichlorsilane（S-1） and on SiO2-MgCl2/TiCl4 （S-2） respectively. Two supported catalysts S-1 and S-2 used as catalysts for ethylene polymerization were studied and the influences of various polymerization conditions, including the polymerization temperature, cocatalysts, Al/Ni molar ratio on the catalytic activity, branching degree and branch length of PE were also investigated. The experimental results show that the supported catalysts exhibit higher catalytic activity for ethylene polymerization, the highest catalytic activity of S-1 using AlEt2Cl as cocatalyst at 50 ℃, reaching 5.8×10^5gPE/molNi·h, and needed lower Al/Ni molar ratio compared to homogeneous analogue.展开更多
Catalyst enhanced chemical vapor deposition of nickel film on high Tg polymers such as teflon(PTFE), polyimide(PI), and polysulfone(PS) was investigated by hot wall and cold wall CVD, in which Ni(dmg)_2, Ni(acac)_2, N...Catalyst enhanced chemical vapor deposition of nickel film on high Tg polymers such as teflon(PTFE), polyimide(PI), and polysulfone(PS) was investigated by hot wall and cold wall CVD, in which Ni(dmg)_2, Ni(acac)_2, Ni(hfac)_2, Ni(TMHD)_2, and Ni(cp)_2 are used as precursors, and palladium complexes are used as catalysts. The films obtained were shiny with silvery color. The Ni was metallic and the purity of Ni was about 92%-95% from XPS analysis. SEM micrographs show that the film had good morphology. The conductivity of the film was about 0.5-4 W·cm^(-1). Ni films had good adhesion with polyimide and polysulfone.展开更多
The homogeneous catalyst system [ArN C（Nap）-C（Nap）=NAr]NiCl2 （Nap = 1,8-naphthdiyl, Ar = 2,6- diisopropylphenyl）/AlEt2Cl has been prepared and examined for ethylene polymerization. Polymerization conditions such...The homogeneous catalyst system [ArN C（Nap）-C（Nap）=NAr]NiCl2 （Nap = 1,8-naphthdiyl, Ar = 2,6- diisopropylphenyl）/AlEt2Cl has been prepared and examined for ethylene polymerization. Polymerization conditions such as cocatalyst, Al/Ni molar ratio and polymerization temperature （Tp） have a great effect on catalytic activity and properties of polyethylenes （PE）. The activity of 5.1 × 10^5g PE/mol Ni. h was obtained by the catalyst, activated with AlEt2Cl at 120 of Al/Ni ratio and 30℃. Especially, Tp had a pronounced influence on branches and molecular weight of PE. Branching degree of PE increased with increasing temperature whereas their molecular weight decreased correspondingly. At Tp lower than about 70℃, the resultant PE was an elastic material. When Tp was higher than 70℃, the product was a viscous oil. The resultant PE was confirmed by ^13C-NMR to contain significant amounts of not only methyl but also ethyl, propyl, butyl, amyl, and longer branches （longer than six carbons）. According to gel permeation chromatographic measurement, the weightaverage molecular weights of the polymers obtained ranged from 3.6 × 10^3 to 2.3 × 10^5.展开更多
A phenol-containing dibenzhydryl-based α-diimine ligand bearing hydroxy group on para-position of aniline moiety was designed, synthesized, and investigated in Ni-and Pd-catalyzed ethylene polymerization. The Ni comp...A phenol-containing dibenzhydryl-based α-diimine ligand bearing hydroxy group on para-position of aniline moiety was designed, synthesized, and investigated in Ni-and Pd-catalyzed ethylene polymerization. The Ni complex bearing hydroxy groups resulted in not only high polyethylene molecular weight(Mn up to 1.5 × 10^~6), but also significantly increased melting temperature(Tm up to 123℃) and greatly decreased branching density(33/1000 C) versus the Ni catalyst bearing OMe group on para-position of aniline moiety. This is consistent with the hypothesis that the deprotonation of the phenol moiety generated a phenoxide bearing strong electrondonating O-substituent by methylaluminoxane(MAO) cocatalyst. The Pd complexes bearing hydroxy groups exhibited similar catalytic properties to those of the Pd catalyst bearing OMe groups did.展开更多
Ethylene oligomerization has been investigated by using catalyst systemscomposed of nickel (II) diimine complexes (diimine = N, N′-o-phenylene bis(salicylideneaminato), N,N′-o-phenyl-enebisbenzal, N, N′-ethylenebis...Ethylene oligomerization has been investigated by using catalyst systemscomposed of nickel (II) diimine complexes (diimine = N, N′-o-phenylene bis(salicylideneaminato), N,N′-o-phenyl-enebisbenzal, N, N′-ethylenebisbenzal) and ethylaluminoxane (EAO). The main productsin toluene and at 110―200℃ were olefins with low carbon numbers (C_4―C_(10)). Effects of reactiontemperature, Al/Ni molar ratio and reaction period on both the catalytic activity and productdistribution were explored. The activity of 1.84 x 10~5 g of oligomer/(mol_(Ni)·h), with 87.4% ofselectivity to C_4―C_(10) olefins, was attained at 200℃ in the reaction when a catalyst composedof NiCl_2-(PhCH= o-NC_6H_4N= CHPh) and EAO was used.展开更多
制备了N,N-二(2,6-二异丙基苯基)苊二亚胺氯化镍,与A lE t2C l组成催化体系,催化4-乙烯基吡啶(4-VP)的聚合。研究表明,该催化体系可以有效地催化4-乙烯基吡啶聚合,并具有较高的活性,聚合条件如单体浓度、铝镍摩尔比、聚合温度和聚合时...制备了N,N-二(2,6-二异丙基苯基)苊二亚胺氯化镍,与A lE t2C l组成催化体系,催化4-乙烯基吡啶(4-VP)的聚合。研究表明,该催化体系可以有效地催化4-乙烯基吡啶聚合,并具有较高的活性,聚合条件如单体浓度、铝镍摩尔比、聚合温度和聚合时间等对4-乙烯基吡啶的聚合反应活性有较大的影响。最佳反应条件是单体浓度为0.6 m o l/L、n(A l)/n(N i)为800、温度为30℃,这时催化活性达到47.2 kg P(4-VP)/m o l N i.h。展开更多
文摘In the practical use for the production of the α-olefins, it is highly desired to develop a novel heterogeneous catalyst system. The metal complexes immobilized into the clay interlayers show a great potential as heterogeneous catalysts due to their excellent processability. In this study, nine types of heterogeneous procatalyst Ln/Ni2+-micas were synthesized via a one-pot preparation method, which includes both the condensation reaction of the ligand derivatives and the intercalation of the ligands into the Ni2+ ion-exchanged fluorotetrasilicic mica interlayer. The ligand structures of the prepared procatalysts were [Ln: R-N = C(Nap)-C(Nap) = N-R] [(Nap = 1,8-naphthdiyl) (L1, R = 2-MePh;L2, R = 2-FPh;L3, R = 2-BrPh;L4, R = 4-MePh;L5, R = 4-FPh;L6, R = 4-BrPh;L7, R = 2,4-F2Ph;L8, R = 2,4-Br2Ph;L9, R = 2,6-F2Ph). At 50℃ and 0.7 MPaethylene pressure, the triisobutylaluminum-activated L1-L6/Ni2+-mica showed a catalytic activity for the ethylene oligo-/polymerization in the range of 334 - 549 g-ethylene•g-cat–1•h–1. A high catalyst activity was obtained when the substituent having a larger steric bulk than that of a methyl substituent was introduced at the ortho-position of the aryl rings. The introduction of the fluorine substituent as a strong electron-withdrawing group to the para-position also increased the catalytic activity. The L2, L4, L5, and L6/Ni2+-micas showed moderate selectivities to oligomers consisting of C4-C20 in the range of 19.9 - 41.6 wt% at 50℃. The calculated Schulz-Flory constants α based on the mole fraction of C12 and C14 were within 0.61 - 0.78.
基金Supported by the National Natural Science Foundation of China(No.20964003)
文摘A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}dibromo- nickel were successfully synthesized, and characterized by 1H NMR, 13C NMR, Fourier transform infrared spectroscope（FTIR）, elemental analysis and X-ray photoelectron spectroscopy（XPS）. α-Diimine ligand 1b, bis[N,N′-（2,6- dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2b, {bis[N,N′-（2,6-dimethyl- phenyl）imino]-2,3-butanediylidene}dibromonickel were also synthesized and characterized for comparison. The pre-catalyst 2a with sterically bulky, electron-donating group tert-butyl, activated by diethylaluminum chloride （DEAC） and tested in the polymerization of ethylene, was very highly active[2.01×107 g PE/（mol Ni？h？0.1 MPa）] and led to a very highly branched polyethylene（ca. 35―103 branches/1000 C）. The state of the polyethylene obtained varied from plastic, elastomer polymers to the oil-like hyperbranched polymers.
基金financially supported by the Fundamental Research Funds for the Central Universities (WK2060200025)Advanced Catalysis and Green Manufacturing Collaborative Innovation Center (ACGM2016-06-01)Yixing Taodu Ying Cai Program
文摘Naphthyl-α-diimine nickel complexes with systematically varied ligand sterics, activated by modified methylaluminoxane（MMAO）, were tested in the polymerization of higher α-olefin（1-hexene, 1-decene and 1-hexadecene） under suitable conditions. The polymerization results indicated the possibility of precise microstructure control, depending on catalyst structure, polymerization temperature, monomer concentration and types of monomers, which in turn strongly affects the resultant polymer properties. Naphthyl-α-diimine nickel complex bearing chiral bulky sec-phenethyl groups in the o-naphthyl position showed good catalytic activity, and resulted in branched polymers（42-88/1000 C） with high molecular weights（Mn：（4.3-15.2） × 10^4 g·mol^-1） and narrow molecular weight distribution（Mw/Mn = 1.13-1.29, RT）, which suggested a living polymerization. The increasing steric hindrance of catalyst leads to enhance insertion for 2,1-insertion of α-olefin and the chain-walking reaction.
基金Funded by the Science Foundation of Guangdong Province (No.031598)
文摘Bis （4-（4-amino-3, 5-diethylbenzyl）-2, 6-diethylphenylimino） acenaphthene] di- chloronickel （NiLCl2） was prepared and supported on SiO2 modified by methyl trichlorsilane（S-1） and on SiO2-MgCl2/TiCl4 （S-2） respectively. Two supported catalysts S-1 and S-2 used as catalysts for ethylene polymerization were studied and the influences of various polymerization conditions, including the polymerization temperature, cocatalysts, Al/Ni molar ratio on the catalytic activity, branching degree and branch length of PE were also investigated. The experimental results show that the supported catalysts exhibit higher catalytic activity for ethylene polymerization, the highest catalytic activity of S-1 using AlEt2Cl as cocatalyst at 50 ℃, reaching 5.8×10^5gPE/molNi·h, and needed lower Al/Ni molar ratio compared to homogeneous analogue.
基金Funded by the National Natural Science Foundation of China(51566005)
文摘Catalyst enhanced chemical vapor deposition of nickel film on high Tg polymers such as teflon(PTFE), polyimide(PI), and polysulfone(PS) was investigated by hot wall and cold wall CVD, in which Ni(dmg)_2, Ni(acac)_2, Ni(hfac)_2, Ni(TMHD)_2, and Ni(cp)_2 are used as precursors, and palladium complexes are used as catalysts. The films obtained were shiny with silvery color. The Ni was metallic and the purity of Ni was about 92%-95% from XPS analysis. SEM micrographs show that the film had good morphology. The conductivity of the film was about 0.5-4 W·cm^(-1). Ni films had good adhesion with polyimide and polysulfone.
基金This work was supported by the Foundation of Guangdong Province (No. 31598).
文摘The homogeneous catalyst system [ArN C（Nap）-C（Nap）=NAr]NiCl2 （Nap = 1,8-naphthdiyl, Ar = 2,6- diisopropylphenyl）/AlEt2Cl has been prepared and examined for ethylene polymerization. Polymerization conditions such as cocatalyst, Al/Ni molar ratio and polymerization temperature （Tp） have a great effect on catalytic activity and properties of polyethylenes （PE）. The activity of 5.1 × 10^5g PE/mol Ni. h was obtained by the catalyst, activated with AlEt2Cl at 120 of Al/Ni ratio and 30℃. Especially, Tp had a pronounced influence on branches and molecular weight of PE. Branching degree of PE increased with increasing temperature whereas their molecular weight decreased correspondingly. At Tp lower than about 70℃, the resultant PE was an elastic material. When Tp was higher than 70℃, the product was a viscous oil. The resultant PE was confirmed by ^13C-NMR to contain significant amounts of not only methyl but also ethyl, propyl, butyl, amyl, and longer branches （longer than six carbons）. According to gel permeation chromatographic measurement, the weightaverage molecular weights of the polymers obtained ranged from 3.6 × 10^3 to 2.3 × 10^5.
基金financially supported by the National Natural Science Foundation of China (No. 21690071)
文摘A phenol-containing dibenzhydryl-based α-diimine ligand bearing hydroxy group on para-position of aniline moiety was designed, synthesized, and investigated in Ni-and Pd-catalyzed ethylene polymerization. The Ni complex bearing hydroxy groups resulted in not only high polyethylene molecular weight(Mn up to 1.5 × 10^~6), but also significantly increased melting temperature(Tm up to 123℃) and greatly decreased branching density(33/1000 C) versus the Ni catalyst bearing OMe group on para-position of aniline moiety. This is consistent with the hypothesis that the deprotonation of the phenol moiety generated a phenoxide bearing strong electrondonating O-substituent by methylaluminoxane(MAO) cocatalyst. The Pd complexes bearing hydroxy groups exhibited similar catalytic properties to those of the Pd catalyst bearing OMe groups did.
文摘Ethylene oligomerization has been investigated by using catalyst systemscomposed of nickel (II) diimine complexes (diimine = N, N′-o-phenylene bis(salicylideneaminato), N,N′-o-phenyl-enebisbenzal, N, N′-ethylenebisbenzal) and ethylaluminoxane (EAO). The main productsin toluene and at 110―200℃ were olefins with low carbon numbers (C_4―C_(10)). Effects of reactiontemperature, Al/Ni molar ratio and reaction period on both the catalytic activity and productdistribution were explored. The activity of 1.84 x 10~5 g of oligomer/(mol_(Ni)·h), with 87.4% ofselectivity to C_4―C_(10) olefins, was attained at 200℃ in the reaction when a catalyst composedof NiCl_2-(PhCH= o-NC_6H_4N= CHPh) and EAO was used.
文摘制备了N,N-二(2,6-二异丙基苯基)苊二亚胺氯化镍,与A lE t2C l组成催化体系,催化4-乙烯基吡啶(4-VP)的聚合。研究表明,该催化体系可以有效地催化4-乙烯基吡啶聚合,并具有较高的活性,聚合条件如单体浓度、铝镍摩尔比、聚合温度和聚合时间等对4-乙烯基吡啶的聚合反应活性有较大的影响。最佳反应条件是单体浓度为0.6 m o l/L、n(A l)/n(N i)为800、温度为30℃,这时催化活性达到47.2 kg P(4-VP)/m o l N i.h。
