Mitigating Urban Heat Island Effects: A Review of Innovative Pavement Technologies and Integrated Solutions

In this review paper,we present a thorough investigation into the role of pavement technologies in advancing urban sustainability.Our analysis traverses the historical evolution of these technologies,meticulously evaluating their socio-economic and environmental impacts,with a particular emphasis on their role in mitigating the urban heat island effect.The evaluation of pavement types and variables influencing pavement performance to be used in the multi-criteria decision-making(MCDM)framework to choose the optimal pavement application are at the heart of our research.Which serves to assess a spectrum of pavement options,revealing insights into the most effective and sustainable practices.By highlighting both the existing challenges and potential innovative solutions within thefield,this paper aims to offer a directional compass for future urban planning and infrastructural advancements.This review not only synthesizes the current state of knowledge but also aims to chart a course for future exploration,emphasizing the critical need for innovative and environmentally sensitive pavement tech-nologies in the creation of resilient and sustainable urban environments.

A new model of flow over stretching(shrinking)and porous sheet with its numerical solutions

The viscous fluid flow and heat transfer over a stretching(shrinking)and porous sheets of nonuniform thickness are investigated in this paper.The modeled problem is presented by utilizing the stretching(shrinking)and porous velocities and variable thickness of the sheet and they are combined in a relation.Consequently,the new problem reproduces the different available forms of flow motion and heat transfer maintained over a stretching(shrinking)and porous sheet of variable thickness in one go.As a result,the governing equations are embedded in several parameters which can be transformed into classical cases of stretched(shrunk)flows over porous sheets.A set of general,unusual and new variables is formed to simplify the governing partial differential equations and boundary conditions.The final equations are compared with the classical models to get the validity of the current simulations and they are exactly matched with each other for different choices of parameters of the current problem when their values are properly adjusted and manipulated.Moreover,we have recovered the classical results for special and appropriate values of the parameters(δ_(1),δ_(2),δ_(3),c,and B).The individual and combined effects of all inputs from the boundary are seen on flow and heat transfer properties with the help of a numerical method and the results are compared with classical solutions in special cases.It is noteworthy that the problem describes and enhances the behavior of all field quantities in view of the governing parameters.Numerical result shows that the dual solutions can be found for different possible values of the shrinking parameter.A stability analysis is accomplished and apprehended in order to establish a criterion for the determinations of linearly stable and physically compatible solutions.The significant features and diversity of the modeled equations are scrutinized by recovering the previous problems of fluid flow and heat transfer from a uniformly heated sheet of variable(uniform)thickness with variable(uniform)stretching/shrinking and injection/suction velocities.

POSITIVE CLASSICAL SOLUTIONS OF DIRICHLET PROBLEM FOR THE STEADY RELATIVISTIC HEAT EQUATION

In this paper,for a bounded C2 domain,we prove the existence and uniqueness of positive classical solutions to the Dirichlet problem for the steady relativistic heat equation with a class of restricted positive C2 boundary data.We have a non-existence result,which is the justification for taking into account the restricted boundary data.There is a smooth positive boundary datum that precludes the existence of the positive classical solution.

Effects of cooling rate on solution heat treatment of as-cast A356 alloy

The effect of cooling rate of the solidification process on the following solution heat treatment of A356 alloy was investigated,where the cooling rates of 96 K/s and 3 K/s were obtained by the step-like metal mold.Then the eutectic silicon morphology evolution and tensile properties of the alloy samples were observed and analyzed after solution heat treatment at 540 °C for different time.The results show that the high cooling rate of the solidification process can not only reduce the solid solution heat treatment time to rapidly modify the eutectic silicon morphology,but also improve the alloy tensile properties.Specially,it is found that the disintegration,the spheroidization and coarsening of eutectic silicon of A356 alloy are completed during solution heat treatment through two stages,i.e.,at first,the disintegration and spheroidization of the eutectic silicon mainly takes place,then the eutectic silicon will coarsen.

Aqueous ammonia solution cooling absorption refrigeration driven by fishing boat diesel exhaust heat

A solution cooling absorption（SCA）approach is proposed to modify the aqueous ammonia absorption refrigerat-ion cycle using the strong solution from the absorber to cool the forepart of the absorption in the cycle for reclaiming some portion of absorption heat.As a consequence of raised temperature at the inlet,the strong solution partially boils at the outlet of the solution heat exchanger,and diminishes the thermal heat consumption of the heat source.The calculation results show that the coefficient of performance（COP）of this modified cycle is about 28.3% higher than that of the traditional cycle under typical conditions;while the required heat transfer area of the total heat exchangers of the cycle is somewhat less than that of the traditional one.The capacity of refrigeration with the new absorption cycle is more than doubled in contrast to the adsorption scheme with an identical configuration.It is sufficient to supply a fishing boat the chilling capacity for preservation of fishing products with the modified cycle chiller driven by its diesel engine exhaust.

Gradual solution heat treatment of AlSiCuMg cast alloys

The microstructure characteristics of AlSiCuMg cast alloys were studied withdifferent Cu content and the gradual solution treatment by DSC, SEM, TEM and mechanical method. Themelting point of alpha (Al) + Si decreases and polynary eutectic phases with low melting point formwith increase of Cu content. Gradual solution treatment includes two steps: solution treating nearthe melting point of polynary eutectic phase to take it dissolve first, and then increasing solutiontemperature to take the remainder copper intermetallics dissolved into alpha (Al). Grain boundariesmelting can be avoided by gradual solution treatment, even the maximum solution temperature isabove final solidification point, and the age hardening response increases correspondingly

HYBRID FEM WITH FUNDAMENTAL SOLUTIONS AS TRIAL FUNCTIONS FOR HEAT CONDUCTION SIMULATION

A new type of hybrid finite element formulation with fundamental solutions as internal interpolation functions, named as HFS-FEM, is presented in this paper and used for solving two dimensional heat conduction problems in single and multi-layer materials. In the proposed approach, a new variational functional is firstly constructed for the proposed HFS-FE model and the related existence of extremum is presented. Then, the assumed internal potential field constructed by the linear combination of fundamental solutions at points outside the elemental domain under consideration is used as the internal interpolation function, which analytically satisfies the governing equation within each element. As a result, the domain integrals in the variational functional formulation can be converted into the boundary integrals which can significantly simplify the calculation of the element stiffness matrix. The independent frame field is also introduced to guarantee the inter-element continuity and the stationary condition of the new variational functional is used to obtain the final stiffness equations. The proposed method inherits the advantages of the hybrid Trefftz finite element method （HT-FEM） over the conventional finite element method （FEM） and boundary element method （BEM）, and avoids the difficulty in selecting appropriate terms of T-complete functions used in HT-FEM, as the fundamental solutions contain usually one term only, rather than a series containing infinitely many terms. Further, the fundamental solutions of a problem are, in general, easier to derive than the T-complete functions of that problem. Finally, several examples are presented to assess the performance of the proposed method, and the obtained numerical results show good numerical accuracy and remarkable insensitivity to mesh distortion.

Analytical solutions of transient heat conduction in multilayered slabs and application to thermal analysis of landfills

The study of transient heat conduction in multilayered slabs is widely used in various engineering fields. In this paper, the transient heat conduction in multilayered slabs with general boundary conditions and arbitrary heat generations is analysed. The boundary conditions are general and include various combinations of Dirichlet, Neumann or Robin boundary conditions at either surface. Moreover, arbitrary heat generations in the slabs are taken into account. The solutions are derived by basic methods, including the superposition method, separation variable method and orthogonal expansion method. The simplified double-layered analytical solution is validated by a numerical method and applied to predicting the temporal and spatial distribution of the temperature inside a landfill. It indicates the ability of the proposed analytical solutions for solving the wide range of applied transient heat conduction problems.

Effects of solution heat treatment on microstructure and mechanical properties of AZ61-0.7Si magnesium alloy

The effects of solution heat treatment on the microstructure and mechanical properties of AZ61-0.7Si magnesium alloy were investigated.The results indicate that the solution heat treatment can modify the Chinese script shaped Mg2Si phases in the AZ61-0.7Si magnesium alloy.After being solutionized at 420℃ for 16-48 h,the morphology of the Mg2Si phases in the AZ61-0.7Si alloy changes from the Chinese script shape to the short pole and block shapes.Accordingly,the tensile and creep properties of the AZ61-0.7Si alloy are improved.After being solutionized at 420℃ for 24 h and followed by aging treatment at 200℃ for 12 h,the heat-treated alloy exhibits relatively high tensile and creep properties than those of the as-cast alloy.

Novel high strength Al−10.5Si−3.4Cu−0.2Mg alloy produced through two-stage solution heat treatment

Mechanical properties of aluminum−silicon−copper alloys are enhanced through precipitation hardening.The response of these alloys to age-hardening is very slow.To overcome this problem,0.2,0.4 and 0.7 wt.%magnesium were added to Al−10.5Si−3.4Cu alloy.The new alloys were subjected to two types of precipitation hardening processes different in the solutionizing stage.The results showed that the presence of various amounts of magnesium in the composition of this alloy accelerates the response to ageing treatments,increasing the hardness and strength.Higher mechanical properties can be achieved when the alloys were subjected to a two-stage solution heat treatment.It is found that Al−10.5Si−3.4Cu alloy containing 0.2 wt.%Mg treated through a two-stage solution process,has optimum properties with ultimate tensile strength of 383.9 MPa,yield strength of 289.7 MPa and elongation of 3.97%,and can be used as a substitute for a large number of aluminum castings which need high strength and excellent castability.

Dual solutions of MHD stagnation point flow and heat transfer over a stretching/shrinking sheet with generalized slip condition

An analysis was made to study the steady momentum and heat transfer characteristics of a viscous electrically conducting fluid near a stagnation point due to a stretching/shrinking sheet in the presence of a transverse magnetic field and generalized slip condition. Two flow problems corresponding to the planar and axisymmetric stretching/shrinking sheet were considered. By means of similarity transformations, the obtained resultant nonlinear ordinary differential equations were solved numerically using a shooting method for dual solutions of velocity and temperature profiles. Some important physical features of the flow and heat transfer in terms of the fluid velocity, the temperature distribution, the skin friction coefficient and the local Nusselt number for various values of the controlling governing parameters like velocity slip parameter, critical shear rate, magnetic field, ratio of stretching/shrinking rate to external flow rate and Prandtl number were analyzed and discussed. An increase of the critical shear rate decreases the fluid velocity whereas the local Nusselt number increases. The comparison of the present numerical results with the existing literature in a limiting case is given and found to be in an excellent agreement.

Numerical modeling dynamic process of multi-feed microwave heating of industrial solution media

The exothermic efficiency of microwave heating an electrolyte/water solution is remarkably high due to the dielectric heating by orientation polarization of water and resistance heating by the Joule process occurred simultaneously compared with pure water.A three-dimensional finite element numerical model of multi-feed microwave heating industrial liquids continuously flowing in a meter-scale circular tube is presented.The temperature field inside the applicator tube in the cavity is solved by COMSOL Multiphysics and professional programming to describe the momentum,energy and Maxwell's equations.The evaluations of the electromagnetic field,the temperature distribution and the velocity field are simulated for the fluids dynamically heated by singleand multi-feed microwave system,respectively.Both the pilot experimental investigations and numerical results of microwave with single-feed heating for fluids with different effective permittivity and flow rates show that the presented numerical modeling makes it possible to analyze dynamic process of multi-feed microwave heating the industrial liquid.The study aids in enhancing the understanding and optimizing of dynamic process in the use of multi-feed microwave heating industrial continuous flow for a variety of material properties and technical parameters.

Two exact solutions of the DPL non-Fourier heat conduction equation with special conditions

This paper presents two exact explicit solutions for the three dimensional dual-phase lag （DLP） heat conduction equation, during the derivation of which the method of trial and error and the authors＇ previous experiences are utilized. To the authors＇ knowledge, most solutions of 2D or 3D DPL models available in the literature are obtained by numerical methods, and there are few exact solutions up to now. The exact solutions in this paper can be used as benchmarks to validate numerical solutions and to develop numerical schemes, grid generation methods and so forth. In addition, they are of theoretical significance since they correspond to physically possible situations. The main goal of this paper is to obtain some possible exact explicit solutions of the dual-phase lag heat conduction equation as the benchmark solutions for computational heat transfer, rather than specific solutions for some given initial and boundary conditions. Therefore, the initial and boundary conditions are indeterminate before derivation and can be deduced from the solutions afterwards. Actually, all solutions given in this paper can be easily proven by substituting them into the governing equation.

Relationship among solution heating rate,mechanical properties,microstructure and texture of Al−Mg−Si−Cu alloy

The relationship among heating rate, mechanical properties, microstructure and texture of Al-Mg-Si-Cu alloy during solution treatment was investigated through tensile test, scanning electron microscope, X-ray diffractometer and EBSD technology. The experimental results reveal that there is a non-monotonic relationship among solution heating rate, mechanical properties, microstructure and texture. As the solution heating rate increases, the strength variations are dependent on the tensile direction;work hardening exponent n decreases first, and then increases;plastic strain ratio r increases first, and then decreases, and finally increases. The final microstructure and texture are also affected by heating rate. As heating rate increases, the microstructure transforms from elongated grain structure to equiaxed grain structure, and the average grain size decreases first, and then increases, and decreases finally. Although the texture components including CubeND{001}<310> and P{011}<122> orientations almost have no change with the increase of heating rate, the texture intensity and volume fraction decrease first, and then increase, and finally decrease. Both microstructure and texture evolutions are weakly affected by heating rate. Improving heating rate is not always favorable for the development of fine equiaxed grain structure, weak texture and high average r value, which may be related to the recrystallization behavior.

ASYMPTOTIC BEHAVIOR OF SOLUTIONS TO THE HEAT EQUATIONS WITH NONLINEAR BOUNDARY CONDITIONS

The purpose of this paper is to investigate the stability and asymptotic behavior of the time-dependent solutions to a linear parabolic equation with nonlinear boundary condition in relation to their corresponding steady state solutions. Then, the above results are extended to a semilinear parabolic equation with nonlinear boundary condition by analyzing the corresponding eigenvalue problem and using the method of upper and lower solutions.

Theoretical solution of transient heat conduction problem in one-dimensional double-layer composite medium

To make heat conduction equation embody the essence of physical phenomenon under study, dimensionless factors were introduced and the transient heat conduction equation and its boundary conditions were transformed to dimensionless forms. Then, a theoretical solution model of transient heat conduction problem in one-dimensional double-layer composite medium was built utilizing the natural eigenfunction expansion method. In order to verify the validity of the model, the results of the above theoretical solution were compared with those of finite element method. The results by the two methods are in a good agreement. The maximum errors by the two methods appear when τ（τ is nondimensional time） equals 0.1 near the boundaries of ζ =1 （ζ is nondimensional space coordinate） and ζ =4. As τ increases, the error decreases gradually, and when τ =5 the results of both solutions have almost no change with the variation of coordinate 4.

Analytical solutions to a compressible boundary layer problem with heat transfer

The problem of momentum and heat transfer in a compressible boundary layerbehind a thin expansion wave was solved by the application of the similarity transformation and theshooting technique. Utilizing the analytical expression of a two-point boundary value problem formomentum transfer, the energy boundary layer solution was represented as a function of thedimensionless velocity, and as the parameters of the Prandtl number, the velocity ratio, and thetemperature ratio.

Self-Similar Solution of Heat and Mass Transfer of Unsteady Mixed Convection Flow on a Rotating Cone Embedded in a Porous Medium Saturated with a Rotating Fluid

A self-similar solution of unsteady mixed convection flow on a rotating cone embedded in a porous medium saturated with a rotating fluid in the presence of the first and second orders resistances has been obtained. It has been shown that a self-similar solution is possible when the free stream angular velocity and the angular velocity of the cone vary inversely as a linear function of time. The system of ordinary differential equations governing the flow has been solved numerically using an implicit finite difference scheme in combination with the quasi-linearization technique. Both prescribe wall temperature and prescribed heat flux conditions are considered. Numerical results are reported for the skin friction coefficients, Nusselt number and Sherwood number. The effect of various parameters on the velocity, temperature and concentration profiles are also presented here.

Effects of solution heat treatment on corrosion resistance of 5083F Al alloy

Aluminum alloys are used as substitutes for fiber reinforced polymer(FRP) in ships and boats.However,ships constructed with 5000-series Al alloy suffer a little corrosion in the marine environment,when they run in high speed,and high flow rate,etc.Therefore,solution heat treatment was carried out to prevent corrosion.The optimal heat treatment involved heating specimens for 120 min at 420 ℃ and then cooling them in water.In addition,the optimal ageing condition involved ageing specimens for 240 min at 180 ℃.The slow strain rate test(SSRT) in a seawater revealed that heat treatment under optimal conditions produced improved elongation,time-to-fracture and amount of dimples compared with the as-received specimen.

Urban Planning Based on Nature—A Nature-Based Solution

After an international contest announced by the City of Abu Dhabi “Cool Abu Dhabi Challenge”1 and the article published as a digest of a paper titled A Nature-based Solution [1], the decision has been made to take part in improving thermal comfort in public spaces by mitigating the impact of the effect of Urban Heat Islands (UHI)2 in the city of the Belgrade. The basic research aims at achieving the balance between the conflicting impacts when the buildings with their infrastructure and water-green surrounding area are in such correlation that it fulfils acceptable living and heating standards and reduces the use of fossil fuels for cooling the urban areas (buildings). By implementing the remote detection it is possible to analyze and quantify the impact of over-building on the temperature rise in urban areas as well as the disturbance of the heating comfort and the increased demand for additional cooling. Now it is possible to create virtual models that will incorporate this newly-added urban vegetation into urban plans, depending on the evaporation potential that will affect the microclimate of the urban area. Such natural cooling can be measured and adapted and hence aimed at a potential decrease in areas with UHI emissions [2]. Suitable greenery in the summer season can be a useful improvement which concurrently enables and complements several cooling mechanisms—evaporative cooling and evapotranspiration, i.e. natural cooling systems. The remote detection shall establish and map the “healthy” and “unhealthy” greenery zones—that is the vegetation zones with the highest evaporative potential with the “cooling by evaporation” effect and also, by implementing the urban prediction model, it shall propose green infrastructure corridors aimed at a potential decrease in the Urban Heat Island Emission.