According to spontaneous combustion propensity,the longwall gob is divided into three zones,including heat dissipation zone,self-heating zone and the choking zone.Only in the self-heating zone can temperature of coal ...According to spontaneous combustion propensity,the longwall gob is divided into three zones,including heat dissipation zone,self-heating zone and the choking zone.Only in the self-heating zone can temperature of coal rise due to oxidation.Studying the distribution of the "Three Zones" in gob is important for predicting and preventing spontaneous combustion in coalmine.In normal mining operations,temperature of coal is roughly constant.The process of mass transfer in the gob is considered to be steady.Based on mass conservation,gas species conservation,darcy's law,Ficks law of diffusion and coal oxidation 1-grade reaction rule,governing equation for air leakage intensity and species concentration are deduced.With critical value of coal spontaneous combustion and the size of longwall workface as basic dimension,a dimensionless steady coupled model of air flow diffusion and chemical reaction in loose coal of Fully Mechanized Top-Coal Caving Mining Workface(FMTCCMW) is setup.By solving the model numerically,regulation of three zones' distribution and spontaneous combustion in the gob can be obtained.The results can be easily popularized to prediction of spontaneous combustion in other coalmines' longwall gob.展开更多
Prediction of radon flux from the fractured zone of a propagating cave mine is basically associated with uncertainty and complexity. For instance, there is restricted access to these zones for field measure- ments, an...Prediction of radon flux from the fractured zone of a propagating cave mine is basically associated with uncertainty and complexity. For instance, there is restricted access to these zones for field measure- ments, and it is quite difficult to replicate the complex nature of both natural and induced fractures in these zones in laboratory studies. Hence, a technique for predicting radon flux from a fractured rock using a discrete fracture network （DFN） model is developed to address these difficulties. This model quantifies the contribution of fractures to the total radon flux, and estimates the fracture density from a measured radon flux considering the effects of advection, diffusion, as well as radon generation and decay. Radon generation and decay are classified as reaction processes. Therefore, the equation solved is termed as the advection-diffusion-reaction equation （ADRE）. Peclet number （Pe）, a conventional dimensionless parameter that indicates the ratio of mass transport by advection to diffusion, is used to classify the transport regimes. The results show that the proposed model effectively predicts radon flux from a fractured rock. An increase in fracture density for a rock sample with uniformly distributed radon generation rate can elevate radon flux significantly compared with another rock sample with an equivalent increase in radon generation rate. In addition to Pe, two other independent dimensionless parameters （derived for radon transport through fractures） significantly affect radon dimensionless flux. Findings provide insight into radon transport through fractured rocks and can be used to improve radon control measures for proactive mitigation.展开更多
Large-deflection flexure pivot is widely used in high precision rotation application, but there are less flexure configurations and simple and convenient design methods, This paper presents a novel large-deflection cu...Large-deflection flexure pivot is widely used in high precision rotation application, but there are less flexure configurations and simple and convenient design methods, This paper presents a novel large-deflection curved-compliant annulus-shaped flexure pivot composed of six curved beam flexure elements. It can offer more than lO^angular stroke theoretically. Firstly, main-motion pseudo-rigid-body method is introduced to establish the flexure pivot model. Although pseudo-rigid-body method can be used to analyze the large-deformation flexure pivot performance, the method is definitely a laborious and difficult task for designing this novel flexure pivot. In order to simply the designing process, dimension-design graphs based on the parametric models and finite element analysis is presented. Using the dimension-design method as a tool, the designers can determine the optimal geometry rapidly, based on the stiffness and rotation demands of an annulus-shaped flexure pivot. Finally, dimension-design graph examples are given whose primary design aims to achieve a rotation stroke of annulus-shaped flexure pivot. The finite element analysis results show that the relative designing error between anticipative rotation stroke and graph design result is less than 4%. The dimensionless method used in designing annulus-shaped flexure pivot can reduce design process in both time and complexity. The novel annulus-shaped flexure pivot and dimension-design method are helpful supplement to configuration and design method of large-deflection flexure pivot.展开更多
In 2013, World-Universe Model (WUM) proposed a principally different way to solve the problem of Newtonian Constant of Gravitation measurement precision. WUM revealed a self-consistent set of time-varying values of Pr...In 2013, World-Universe Model (WUM) proposed a principally different way to solve the problem of Newtonian Constant of Gravitation measurement precision. WUM revealed a self-consistent set of time-varying values of Primary Cosmological parameters of the World: Gravitation parameter, Hubble’s parameter, Age of the World, Temperature of the Microwave Background Radiation, and the concentration of Intergalactic plasma. Based on the inter-connectivity of these parameters, WUM solved the Missing Baryon problem and predicted the values of the following Cosmological parameters: gravitation G, concentration of Intergalactic plasma, relative energy density of protons in the Medium, and the minimum energy of photons, which were experimentally confirmed in 2015-2018. Between 2013 and 2018, the relative standard uncertainty of G measurements decreased x6. The set of values obtained by WUM was recommended for consideration in CODATA Recommended Values of the Fundamental Physical Constants 2014.展开更多
In random network models, sizes for pores and throats are distributed according to a truncated Weibull distribution. As a result, parameters defining the shape of the distribution are critical for the characteristic o...In random network models, sizes for pores and throats are distributed according to a truncated Weibull distribution. As a result, parameters defining the shape of the distribution are critical for the characteristic of the network. In this paper, an algorithm to distribute pores and throats in random network was established to more representatively describe the topology of porous media. First, relations between Weibull parameters and the distribution of dimensionless throat sizes were studied and a series of standard curves were obtained. Then, by analyzing the capillary pressure curve of the core sample, frequency distribution histogram of throat sizes was obtained. All the sizes were transformed to dimensionless numbers ranged from 0 to 1. Curves of the core were compared to the standard curves, and truncated Weibull parameters could be determined according an inverse algorithm. Finally, aspect ratio and average length of throats were adjusted to simultaneously fit the porosity and the capillary pressure curves and the whole network was established. The predicted relative permeability curves were in good agreement with the experimental data of cores, indicating the validity of the algorithm.展开更多
基金Supported by the National Natural Science Foundatin of China(10972178)
文摘According to spontaneous combustion propensity,the longwall gob is divided into three zones,including heat dissipation zone,self-heating zone and the choking zone.Only in the self-heating zone can temperature of coal rise due to oxidation.Studying the distribution of the "Three Zones" in gob is important for predicting and preventing spontaneous combustion in coalmine.In normal mining operations,temperature of coal is roughly constant.The process of mass transfer in the gob is considered to be steady.Based on mass conservation,gas species conservation,darcy's law,Ficks law of diffusion and coal oxidation 1-grade reaction rule,governing equation for air leakage intensity and species concentration are deduced.With critical value of coal spontaneous combustion and the size of longwall workface as basic dimension,a dimensionless steady coupled model of air flow diffusion and chemical reaction in loose coal of Fully Mechanized Top-Coal Caving Mining Workface(FMTCCMW) is setup.By solving the model numerically,regulation of three zones' distribution and spontaneous combustion in the gob can be obtained.The results can be easily popularized to prediction of spontaneous combustion in other coalmines' longwall gob.
基金the financial support from the National Institute for Occupational Safety and Health(NIOSH)(200-2014-59613)for conducting this research
文摘Prediction of radon flux from the fractured zone of a propagating cave mine is basically associated with uncertainty and complexity. For instance, there is restricted access to these zones for field measure- ments, and it is quite difficult to replicate the complex nature of both natural and induced fractures in these zones in laboratory studies. Hence, a technique for predicting radon flux from a fractured rock using a discrete fracture network （DFN） model is developed to address these difficulties. This model quantifies the contribution of fractures to the total radon flux, and estimates the fracture density from a measured radon flux considering the effects of advection, diffusion, as well as radon generation and decay. Radon generation and decay are classified as reaction processes. Therefore, the equation solved is termed as the advection-diffusion-reaction equation （ADRE）. Peclet number （Pe）, a conventional dimensionless parameter that indicates the ratio of mass transport by advection to diffusion, is used to classify the transport regimes. The results show that the proposed model effectively predicts radon flux from a fractured rock. An increase in fracture density for a rock sample with uniformly distributed radon generation rate can elevate radon flux significantly compared with another rock sample with an equivalent increase in radon generation rate. In addition to Pe, two other independent dimensionless parameters （derived for radon transport through fractures） significantly affect radon dimensionless flux. Findings provide insight into radon transport through fractured rocks and can be used to improve radon control measures for proactive mitigation.
基金supported by National Natural Science Foundation of China(Grant No. 50675007)Program for New Century Excellent Talents in University of China (Grant No. NCET-06-0165)
文摘Large-deflection flexure pivot is widely used in high precision rotation application, but there are less flexure configurations and simple and convenient design methods, This paper presents a novel large-deflection curved-compliant annulus-shaped flexure pivot composed of six curved beam flexure elements. It can offer more than lO^angular stroke theoretically. Firstly, main-motion pseudo-rigid-body method is introduced to establish the flexure pivot model. Although pseudo-rigid-body method can be used to analyze the large-deformation flexure pivot performance, the method is definitely a laborious and difficult task for designing this novel flexure pivot. In order to simply the designing process, dimension-design graphs based on the parametric models and finite element analysis is presented. Using the dimension-design method as a tool, the designers can determine the optimal geometry rapidly, based on the stiffness and rotation demands of an annulus-shaped flexure pivot. Finally, dimension-design graph examples are given whose primary design aims to achieve a rotation stroke of annulus-shaped flexure pivot. The finite element analysis results show that the relative designing error between anticipative rotation stroke and graph design result is less than 4%. The dimensionless method used in designing annulus-shaped flexure pivot can reduce design process in both time and complexity. The novel annulus-shaped flexure pivot and dimension-design method are helpful supplement to configuration and design method of large-deflection flexure pivot.
文摘In 2013, World-Universe Model (WUM) proposed a principally different way to solve the problem of Newtonian Constant of Gravitation measurement precision. WUM revealed a self-consistent set of time-varying values of Primary Cosmological parameters of the World: Gravitation parameter, Hubble’s parameter, Age of the World, Temperature of the Microwave Background Radiation, and the concentration of Intergalactic plasma. Based on the inter-connectivity of these parameters, WUM solved the Missing Baryon problem and predicted the values of the following Cosmological parameters: gravitation G, concentration of Intergalactic plasma, relative energy density of protons in the Medium, and the minimum energy of photons, which were experimentally confirmed in 2015-2018. Between 2013 and 2018, the relative standard uncertainty of G measurements decreased x6. The set of values obtained by WUM was recommended for consideration in CODATA Recommended Values of the Fundamental Physical Constants 2014.
文摘In random network models, sizes for pores and throats are distributed according to a truncated Weibull distribution. As a result, parameters defining the shape of the distribution are critical for the characteristic of the network. In this paper, an algorithm to distribute pores and throats in random network was established to more representatively describe the topology of porous media. First, relations between Weibull parameters and the distribution of dimensionless throat sizes were studied and a series of standard curves were obtained. Then, by analyzing the capillary pressure curve of the core sample, frequency distribution histogram of throat sizes was obtained. All the sizes were transformed to dimensionless numbers ranged from 0 to 1. Curves of the core were compared to the standard curves, and truncated Weibull parameters could be determined according an inverse algorithm. Finally, aspect ratio and average length of throats were adjusted to simultaneously fit the porosity and the capillary pressure curves and the whole network was established. The predicted relative permeability curves were in good agreement with the experimental data of cores, indicating the validity of the algorithm.
