Development of high energy laser sources with nanosecond pulses at several hertz values for repetition rate has been very attractive in recent years due to their great potential for practical applications. With the re...Development of high energy laser sources with nanosecond pulses at several hertz values for repetition rate has been very attractive in recent years due to their great potential for practical applications. With the recent advancement in fabricating large size laser quality transparent ceramics, diode pumped solid-state laser generating pulse energy of 100 J at 10 Hz has been recently realized at HiLASE center using Yb:YAG ceramic with Cr:YAG cladding. This review discusses Yb based high energy lasers, specific laser geometries for efficient thermal management and the role of transparent ceramics in such diode pumped high-energy-class solid-state lasers around the world.展开更多
We demonstrate an all-solid quasi-continuous-wave （QCW） narrow-band source tunable to sodium D2a line at 589.159 nm. The source is based on sum-frequency mixing between lasers at 1064 nm and 1319 nm in a LBO crystal...We demonstrate an all-solid quasi-continuous-wave （QCW） narrow-band source tunable to sodium D2a line at 589.159 nm. The source is based on sum-frequency mixing between lasers at 1064 nm and 1319 nm in a LBO crystal. The 1064 nm and 1319 nm lasers are produced from two diode side-pumped Nd：YAG master oscillator power amplifier （MOPA） laser systems, respectively. A 33 W output of 589 nm laser is obtained with beam quality factor M^2 = 1.25, frequency stability better than ±0.2 GHz and linewidth less than 0.44 GHz. A prototype 589 nm laser system is assembled, and a sodium laser guided star has been successfully observed in the field test.展开更多
Tailored diode laser single emitters with long(6 mm) resonators and wide(1.2 mm) emission apertures that operate with940 nm emission wavelength were assembled in novel edge-cooled vertically stacked arrays, and used t...Tailored diode laser single emitters with long(6 mm) resonators and wide(1.2 mm) emission apertures that operate with940 nm emission wavelength were assembled in novel edge-cooled vertically stacked arrays, and used to construct a compact and highly efficient fiber coupled pump source for Yb:YAG pulsed high-energy class solid-state lasers. The novel configuration is shown to allow repetition rates of 200 Hz at 1 ms pulse duration, at an output power of 130 W per single emitter. The emission of two stacked arrays was then optically combined to realize pump modules that deliver6 kW peak power(pulse energy 6 J) from a 1.9 mm core diameter fiber, with wall plug efficiency of 50%. This represents a significant improvement in terms of duty cycle and electro-optical efficiency over conventional sources. The pump module has been successfully tested at the Max Born Institute, Berlin during trials for pumping of disk lasers.展开更多
A diode-pumped solid-state laser （DPSSL） with a high energetic stability and long service life is applied to ablate the steel samples instead of traditional Nd：YAG laser pumped by a xenon lamp, and several factors,...A diode-pumped solid-state laser （DPSSL） with a high energetic stability and long service life is applied to ablate the steel samples instead of traditional Nd：YAG laser pumped by a xenon lamp, and several factors, such as laser pulse energy, repetition rate and argon flow rate, that influence laser-induced breakdown spectroscopy （LIBS） analytical performance are investigated in detail. Under the optimal experiment conditions, the relative standard deviations for C, Si, Mn, Ni, Cr and Cu are 3.3%-8.9%, 0.9%-2.8%, 1.2%-4.1%, 1.7%-3.0%, 1.1%-3.4% and 2.5%-8.5%, respectively, with the corresponding relative errors of 1.1%-7.9%, 1.0%-6.3%, 0.4%-3.9%, 1.5%-6.3%, 1.2%-4.0% and 1.2%-6.4%. Compared with the results of the traditional spark discharge optical emission spectrometry technique, the analytical performance of LIBS is just a little inferior due to the less stable laser-induced plasma and smaller amount of ablated sample by the laser. However, the precision, detection limits and accuracy of LIBS obtained in our present work were sufficient to meet the requirements for process analysis. These technical performances of higher stability of output energy and longer service life for DPSSL, in comparison to the Q-switch laser pumped by xeon lamp, qualify it well for the real time online analysis for different industrial applications.展开更多
Laser drivers are an enabling factor to inertial confinement fusion, because laser diodes must be used instead of flash lamps. We discuss the limitations of laser diode arrays and show what steps the industry is takin...Laser drivers are an enabling factor to inertial confinement fusion, because laser diodes must be used instead of flash lamps. We discuss the limitations of laser diode arrays and show what steps the industry is taking. The pump power requirements of large-scale projects such as LIFE or Hi PER are within reach of semiconductor laser diode assemblies.Pulsed light output powers per laser bars have been around 300 W per bar, as in the Jenoptik 940 nm bars previously used for pumping the Yb:YAG slabs in the Di POLE project. By redesigning the semiconductor laser structures 500 W per bar is now commercially available for 808, 880 and 940 nm pump wavelengths. The construction of one inertial fusion power plant will require an amount of semiconductor laser chips in excess of the current annual production by two orders of magnitude. This adds to the engineering task of improving the device characteristics a challenge to production capacity.While the industry benefits from the recent boost in solid-state lighting that acts as a technology driver, cooperation between manufacturers will be imperative, and to this end we propose standardization efforts.展开更多
We report on laser diode(LD) pumped passively Q-switched Yb,Gd:SrF2 lasers with high single-pulse energy for the first time, to the best of our knowledge. In addition, a stable Q-switched laser based on a Cr4+:Y3Al5O1...We report on laser diode(LD) pumped passively Q-switched Yb,Gd:SrF2 lasers with high single-pulse energy for the first time, to the best of our knowledge. In addition, a stable Q-switched laser based on a Cr4+:Y3Al5O12 saturable absorber was demonstrated. The maximum output power of the Q-switched laser obtained was 495 m W, with a pulse width and a pulse repetition rate of 233 ns and 1.238 kHz, respectively. The corresponding single-pulse energy and the peak power were as high as 400 μJ and 1.714 k W. The laser was operated under a transverse electromagnetic mode, and the beam quality was near-diffraction-limited.展开更多
基金co-financed by the European Regional Development Fundthe state budget of the Czech Republic (project HiLASE CoE: Grant No. CZ.02.1.01/0.0/ 0.0/15 006/0000674)+1 种基金the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 739573the Ministry of Education, Youth and Sports of the Czech Republic (Programmes NPU I Project No. LO1602, and Large Research Infrastructure Project No. LM2015086)
文摘Development of high energy laser sources with nanosecond pulses at several hertz values for repetition rate has been very attractive in recent years due to their great potential for practical applications. With the recent advancement in fabricating large size laser quality transparent ceramics, diode pumped solid-state laser generating pulse energy of 100 J at 10 Hz has been recently realized at HiLASE center using Yb:YAG ceramic with Cr:YAG cladding. This review discusses Yb based high energy lasers, specific laser geometries for efficient thermal management and the role of transparent ceramics in such diode pumped high-energy-class solid-state lasers around the world.
文摘We demonstrate an all-solid quasi-continuous-wave （QCW） narrow-band source tunable to sodium D2a line at 589.159 nm. The source is based on sum-frequency mixing between lasers at 1064 nm and 1319 nm in a LBO crystal. The 1064 nm and 1319 nm lasers are produced from two diode side-pumped Nd：YAG master oscillator power amplifier （MOPA） laser systems, respectively. A 33 W output of 589 nm laser is obtained with beam quality factor M^2 = 1.25, frequency stability better than ±0.2 GHz and linewidth less than 0.44 GHz. A prototype 589 nm laser system is assembled, and a sodium laser guided star has been successfully observed in the field test.
基金funded in part via the European Regional Development Fund (ERDF) under contract number 20072013 2/42
文摘Tailored diode laser single emitters with long(6 mm) resonators and wide(1.2 mm) emission apertures that operate with940 nm emission wavelength were assembled in novel edge-cooled vertically stacked arrays, and used to construct a compact and highly efficient fiber coupled pump source for Yb:YAG pulsed high-energy class solid-state lasers. The novel configuration is shown to allow repetition rates of 200 Hz at 1 ms pulse duration, at an output power of 130 W per single emitter. The emission of two stacked arrays was then optically combined to realize pump modules that deliver6 kW peak power(pulse energy 6 J) from a 1.9 mm core diameter fiber, with wall plug efficiency of 50%. This represents a significant improvement in terms of duty cycle and electro-optical efficiency over conventional sources. The pump module has been successfully tested at the Max Born Institute, Berlin during trials for pumping of disk lasers.
基金supported by the Development Fund of National Autonomous Demonstration Innovation Zone of Shandong Peninsula(Grant No.ZCQ17104)the National Key Research and Development Program of China(Grant No.2017YFB0305400)‘double hundred plan’ Yantai talent funding project
文摘A diode-pumped solid-state laser （DPSSL） with a high energetic stability and long service life is applied to ablate the steel samples instead of traditional Nd：YAG laser pumped by a xenon lamp, and several factors, such as laser pulse energy, repetition rate and argon flow rate, that influence laser-induced breakdown spectroscopy （LIBS） analytical performance are investigated in detail. Under the optimal experiment conditions, the relative standard deviations for C, Si, Mn, Ni, Cr and Cu are 3.3%-8.9%, 0.9%-2.8%, 1.2%-4.1%, 1.7%-3.0%, 1.1%-3.4% and 2.5%-8.5%, respectively, with the corresponding relative errors of 1.1%-7.9%, 1.0%-6.3%, 0.4%-3.9%, 1.5%-6.3%, 1.2%-4.0% and 1.2%-6.4%. Compared with the results of the traditional spark discharge optical emission spectrometry technique, the analytical performance of LIBS is just a little inferior due to the less stable laser-induced plasma and smaller amount of ablated sample by the laser. However, the precision, detection limits and accuracy of LIBS obtained in our present work were sufficient to meet the requirements for process analysis. These technical performances of higher stability of output energy and longer service life for DPSSL, in comparison to the Q-switch laser pumped by xeon lamp, qualify it well for the real time online analysis for different industrial applications.
文摘Laser drivers are an enabling factor to inertial confinement fusion, because laser diodes must be used instead of flash lamps. We discuss the limitations of laser diode arrays and show what steps the industry is taking. The pump power requirements of large-scale projects such as LIFE or Hi PER are within reach of semiconductor laser diode assemblies.Pulsed light output powers per laser bars have been around 300 W per bar, as in the Jenoptik 940 nm bars previously used for pumping the Yb:YAG slabs in the Di POLE project. By redesigning the semiconductor laser structures 500 W per bar is now commercially available for 808, 880 and 940 nm pump wavelengths. The construction of one inertial fusion power plant will require an amount of semiconductor laser chips in excess of the current annual production by two orders of magnitude. This adds to the engineering task of improving the device characteristics a challenge to production capacity.While the industry benefits from the recent boost in solid-state lighting that acts as a technology driver, cooperation between manufacturers will be imperative, and to this end we propose standardization efforts.
基金supported by the National Natural Science Foundation of China (NSFC)(Nos. 11974220 and 61635012)the National Key Research and Development Program of China (No. 2016 YFB0701002)
文摘We report on laser diode(LD) pumped passively Q-switched Yb,Gd:SrF2 lasers with high single-pulse energy for the first time, to the best of our knowledge. In addition, a stable Q-switched laser based on a Cr4+:Y3Al5O12 saturable absorber was demonstrated. The maximum output power of the Q-switched laser obtained was 495 m W, with a pulse width and a pulse repetition rate of 233 ns and 1.238 kHz, respectively. The corresponding single-pulse energy and the peak power were as high as 400 μJ and 1.714 k W. The laser was operated under a transverse electromagnetic mode, and the beam quality was near-diffraction-limited.
