Exploring non‐precious metal catalysts for the oxygen reduction reaction （ORR） is essential for fuel cells and metal–air batteries. Herein, we report a Fe‐N‐C catalyst possessing a high specific surface area （1...Exploring non‐precious metal catalysts for the oxygen reduction reaction （ORR） is essential for fuel cells and metal–air batteries. Herein, we report a Fe‐N‐C catalyst possessing a high specific surface area （1501 m2/g） and uniformly dispersed iron within a carbon matrix prepared via a two‐step pyrolysis process. The Fe‐N‐C catalyst exhibits excellent ORR activity in 0.1 mol/L NaOH electrolyte （onset potential, Eo=1.08 V and half wave potential, E1/2=0.88 V vs. reversible hydrogen electrode） and 0.1 mol/L HClO4 electrolyte （Eo=0.85 V and E1/2=0.75 V vs. reversible hydrogen electrode）. The direct methanol fuel cells employing Fe‐N‐C as the cathodic catalyst displayed promising per‐formance with a maximum power density of 33 mW/cm2 in alkaline media and 47 mW/cm2 in acidic media. The detailed investigation on the composition–structure–performance relationship by X‐ray diffraction, X‐ray photoelectron spectroscopy and Mo-ssbauer spectroscopy suggests that Fe‐N4, together with graphitic‐N and pyridinic‐N are the active ORR components. The promising direct methanol fuel cell performance displayed by the Fe‐N‐C catalyst is related to the intrinsic high catalytic activity, and critically for this application, to the high methanol tolerance.展开更多
Direct carbon solid oxide fuel cells(DC-SOFCs)are promising,green,and efficient power-generating devices that are fueled by solid carbons and comprise all-solid-state structures.Developing suitable anode materials for...Direct carbon solid oxide fuel cells(DC-SOFCs)are promising,green,and efficient power-generating devices that are fueled by solid carbons and comprise all-solid-state structures.Developing suitable anode materials for DC-SOFCs is a substantial scientific challenge.Herein we investigated the use of La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_(3)-δ−Ce_(0.8)Gd_(0.2)O_(1.9)(LSCM−GDC)composite electrodes as anodes for La_(0.9)Sr_(0.1)Ga_(0.8)Mg_(0.2)O_(3)-δelectrolyte-based DC-SOFCs,with Camellia oleifera shell char as the carbon fuel.The LSCM−GDC-anode DC-SOFC delivered a maximum power density of 221 mW/cm^(2) at 800℃ and it significantly improved to 425 mW/cm^(2) after Ni nanoparticles were introduced into the LSCM−GDC anode through wet impregnation.The microstructures of the prepared anodes were characterized,and the stability of the anode in a DC-SOFC and the influence of catalytic activity on open circuit voltage were studied.The above results indicate that LSCM–GDC anode is promising to be applied in DC-SOFCs.展开更多
Carbon nanotubes （CNTs） supported Pt-Ru and Pt-Ru-Ni catalysts were prepared by chemical reduction of metal precursors with sodium borohydride at room temperature. The crystallographic properties and composition of ...Carbon nanotubes （CNTs） supported Pt-Ru and Pt-Ru-Ni catalysts were prepared by chemical reduction of metal precursors with sodium borohydride at room temperature. The crystallographic properties and composition of the catalysts were characterized by X-ray diffraction （XRD） and energy dispersive X-ray （EDX） analysis, and the catalytic activity and stability for methanol electro-oxidation were measured by electrochemical impedance spectroscopy （EIS）, linear sweep voltammetries （LSV）, and chronoamperometry （CA）. The results show that the catalysts exhibit face-centered cubic （fcc） structure. The particle size of Pt-Ru-Ni/CNTs catalyst is about 4.8 nm. The catalytic activity and stability of the Pt-Ru-Ni/CNTs catalyst are higher than those of Pt-Ru/CNTs catalyst.展开更多
Platinum/Carbon XC72R （Pt/C） nanocomposite was synthesized in-situ by polyol method. Precursor of hexahydrated chloroplatinic acid H2PtCI6-6H2O was reduced by EG （ethylene glycol） so as to form Pt nanoparticles wh...Platinum/Carbon XC72R （Pt/C） nanocomposite was synthesized in-situ by polyol method. Precursor of hexahydrated chloroplatinic acid H2PtCI6-6H2O was reduced by EG （ethylene glycol） so as to form Pt nanoparticles which were deposited on the surface of carbon. Pt/C composites （treated or untreated carbon） were synthesized at pH - 6.5 and pH = 11. The XRD pattern of Pt/C showed peaks assigned to the crystalline structure of Pt and carbon. TEM images showed that Pt nanoparticles on carbon were ultrafine spheres and the particles obtained sizes from 2 to 6 nm which are mostly concentrated on size of 3 nm. The electrocatalytic activity of Pt/C catalysts toward methanol oxidation was examined by CV （cyclic voltammetry）. Pt/treated XC72R （pH = 11） at potential （0.69 V） exhibited better electroactivity （628 mA/mg Pt）.展开更多
Platinum nanoparticles supported on carbons（Pt/C,60%,mass fraction） electrocatalysts for direct methanol fuel cell（DMFC） were prepared by citrate-stabilized method with different reductants and carbon supports.The...Platinum nanoparticles supported on carbons（Pt/C,60%,mass fraction） electrocatalysts for direct methanol fuel cell（DMFC） were prepared by citrate-stabilized method with different reductants and carbon supports.The catalysts were characterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM） and cyclic voltammetry（CV）.It is found that the size of Pt nanoparticles on carbon is controllable by citrate addition and reductant optimization,and the form of carbon support has a great influence on electrocatalytic activity of catalysts.The citrate-stabilized Pt nanoparticles supported on BP2000 carbon,which was reduced by formaldehyde,exhibit the best performance with about 2 nm in diameter and 66.46 m2/g（Pt） in electrocatalytic active surface（EAS） area.Test on single DMFC with 60%（mass fraction） Pt/BP2000 as cathode electrocatalyst showed maximum power density at 78.8 mW/cm2.展开更多
To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the prepa...To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the preparation of Pt/CNTs@TiO2 and Pt-Mo/CNTs@TiO2 electrocatalysts via a UV-photoreduction method.The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction （XRD）,transmission electron microscopy （TEM）,X-ray photoelectron spectroscopy （XPS）,and infrared spectroscopy of adsorbed probe ammonia molecules.The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique.The results show that Pt-Mo/CNTs@TiO2 electrode exhibits the highest performance in all the electrodes.It is explained that,the structure,the oxidation states,and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO2 and MoOx to the Pt-based catalysts.展开更多
In this study, hydrothermal carbonization(HTC)was applied for surface functionalization of carbon nanotubes(CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carb...In this study, hydrothermal carbonization(HTC)was applied for surface functionalization of carbon nanotubes(CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carbon layers on the surface of the CNTs. By controlling the ratio of glucose to urea, nitrogen contents of up to 1.7 wt%were achieved. The nitrogen-doped carbon nanotube-supported Pd catalysts exhibited superior electrochemical activity for ethanol oxidation relative to the pristine CNTs.Importantly, a 1.5-fold increase in the specific activity was observed for the Pd/HTC-N1.67%CNTs relative to the catalyst without nitrogen doping(Pd/HTC-CNTs). Furtherexperiments indicated that the introduction of nitrogen species on the surface of the CNTs improved the Pd(0)loading and increased the binding energy.展开更多
Urea oxidation is a significant reaction for utilizing urea-rich wastewater or human urine as sustainable power sources which can ease the water eutrophication while generate electricity. A direct urea-hydrogen peroxi...Urea oxidation is a significant reaction for utilizing urea-rich wastewater or human urine as sustainable power sources which can ease the water eutrophication while generate electricity. A direct urea-hydrogen peroxide fuel cell is a new kind of fuel cell employing urea as fuel and hydrogen peroxide as oxidant which possesses a larger cell voltage. Herein, this work tries to promote the kinetics process of urea oxidation by preparing low-cost and high-efficient NiCo2S4 nanowires modified carbon sponge electrode. The carbon sponge used in this work with a similar three-dimensional multi-channel structure to Ni foam, is prepared by carbonizing recycled polyurethane sponge which is also a process of recycling waste. The performance of the prepared catalyst in an alkaline solution is investigated in a three-electrode system.With the introduction of Co element to the catalyst, a reduced initial urea oxidation potential and a high performance are obtained. Furthermore, a direct urea-hydrogen peroxide fuel cell is assembled using the NiCo2S4 nanowires modified carbon sponge anode. Results indicate that the prepared catalyst provides a chance to solve the current problems that hinder the development of urea electrooxidation(high initial urea oxidation potential, low performance, and high electrode costs).展开更多
This work describes the performance of the direct carbon fuel cell(DCFC)fuelled by ash-free coal.Employing coal in the DCFC might be problematic,mainly because of the ash deposition after the cell reactions.In the stu...This work describes the performance of the direct carbon fuel cell(DCFC)fuelled by ash-free coal.Employing coal in the DCFC might be problematic,mainly because of the ash deposition after the cell reactions.In the study,the carbonaceous ash-free component of coal is obtained,which is then evaluated as the DCFC fuel and compared with raw coal,active carbon,carbon black,and graphite.The electrolyte-supported SOFC structure is adapted to build the DCFC.The DCFC based on the ash-free coal fuel exhibits good performance with regard to the maximum power density,day-by-day measurements,and durability at continuous run.When the carbon fuels are internally gasified to H2 and CO,the power density is generally much improved,compared to N2 pyrolysis environment.The power generation is most likely related to the concentration of pyrolyzed gases as well as the electrochemical reactivity of the solid carbon.展开更多
Ni/Carbon was prepared in two steps： initially cellulose as carbon source and NiCl2·6H2O as catalyst of the carbonization process were submitted to hydrothermal treatment at 200 ℃ and further to thermal treatme...Ni/Carbon was prepared in two steps： initially cellulose as carbon source and NiCl2·6H2O as catalyst of the carbonization process were submitted to hydrothermal treatment at 200 ℃ and further to thermal treatment at 900 ℃ under argon atmosphere. The obtained material contains Ni nanoparticles with face-centered cubic （fcc） structure dispersed on amorphous carbon with graphitic domains. PtRu/C electrocatalysts （carbon- supported PtRu nanoparticles） were prepared by an alcohol-reduction process using Ni/Carbon as support. The materials were characterized by thermogravimetric analysis, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and tested as anodes in single direct methanol fuel cell （DMFC）. The performances of PtRu/C electrocatalysts using Ni/Carbon as support were superior to those obtained for PtRu/C using commercial carbon black Vulcan XC72 as support.展开更多
In this study, carbon nanotubes （CNTs） were mixed with ABs-type hydrogen storage alloy （HSA）, as catalyst for an anode in a direct borohydride fuel cell （DBFC）. As comparision, a series of traditional carbon mat...In this study, carbon nanotubes （CNTs） were mixed with ABs-type hydrogen storage alloy （HSA）, as catalyst for an anode in a direct borohydride fuel cell （DBFC）. As comparision, a series of traditional carbon materials, such as acetylene black, Vulcan XC-72R, and super activated carbon （SAC） were also employed. Electrochemical measurements showed that the electrocatalytic activity of HSA was improved greatly by CNTs. The current density of the DI3FC employing the HSA/CNTs catalytic anode could reach 1550 mA.cm-2 （at -0.6 V vs the EIg/HgO electrode） and the maximum power density of 65 mW.cm-2 for this cell could be achieved at room temperature. Furthermore, the life time test lasting for 60 h showed that the cell displayed a good stability.展开更多
Nanoporous carbon/graphene composites （NCGC） are synthesized via one-step hydrothermal approach com- bining carbonization, where phenol and formaldehyde are used as carbon sources and triblock copolymers F 127 as te...Nanoporous carbon/graphene composites （NCGC） are synthesized via one-step hydrothermal approach com- bining carbonization, where phenol and formaldehyde are used as carbon sources and triblock copolymers F 127 as template. Transmission electron microscopy （TEM） and nitrogen adsorption measurements show that the synthe- sized NCGC samples possess high surface area over 400 m2·g-1 and mesoporous structures with interconnected pores. The electrochemical studies demonstrate that Pt catalyst with NCGC as support exhibits better eletrocatalytic activity for methanol oxidation as compared to the catalyst taking widely-used VulcanXC-72 as support. In addition, the potential formation mechanism of NCGC is discussed.展开更多
Highly dispersed,high performance Pt and PtRu catalysts,supported on multiwalled carbon nanotubes(CNTs),were prepared by a high pressure organic colloid method.The particle sizes of the active components were as small...Highly dispersed,high performance Pt and PtRu catalysts,supported on multiwalled carbon nanotubes(CNTs),were prepared by a high pressure organic colloid method.The particle sizes of the active components were as small as 1.2 nm for Pt and 1.1 nm for PtRu,and the active Pt surface areas were 295 and 395 m2/g,respectively.The catalysts showed very high activities toward the anodic oxidation of methanol,evaluated by cyclic voltammetry,being up to 4 times higher than that of commercial Johnson Matthey Hispec 2000 Pt/XC-72R and 5 times better than Hispec 5000 PtRu/XC-72R catalysts.In a full air/hydrogen fuel cell,a membrane-electrode assembly prepared using our Pt/CNT and PtRu/CNT catalysts showed 50% and 100% higher performances than those prepared with commercial Johnson Matthey Pt/XC-72R and PtRu/XC-72R catalysts for the same Pt loading and operating conditions.展开更多
基金supported by the“Strategic Priority Research Program”of the Chinese Academy of Sciences(XDA09030104)the National Basic Research Program of China(973 Program,2012CB215500)+1 种基金the National Natural Science Foundation of China(2157625850823008)~~
文摘Exploring non‐precious metal catalysts for the oxygen reduction reaction （ORR） is essential for fuel cells and metal–air batteries. Herein, we report a Fe‐N‐C catalyst possessing a high specific surface area （1501 m2/g） and uniformly dispersed iron within a carbon matrix prepared via a two‐step pyrolysis process. The Fe‐N‐C catalyst exhibits excellent ORR activity in 0.1 mol/L NaOH electrolyte （onset potential, Eo=1.08 V and half wave potential, E1/2=0.88 V vs. reversible hydrogen electrode） and 0.1 mol/L HClO4 electrolyte （Eo=0.85 V and E1/2=0.75 V vs. reversible hydrogen electrode）. The direct methanol fuel cells employing Fe‐N‐C as the cathodic catalyst displayed promising per‐formance with a maximum power density of 33 mW/cm2 in alkaline media and 47 mW/cm2 in acidic media. The detailed investigation on the composition–structure–performance relationship by X‐ray diffraction, X‐ray photoelectron spectroscopy and Mo-ssbauer spectroscopy suggests that Fe‐N4, together with graphitic‐N and pyridinic‐N are the active ORR components. The promising direct methanol fuel cell performance displayed by the Fe‐N‐C catalyst is related to the intrinsic high catalytic activity, and critically for this application, to the high methanol tolerance.
基金Project(2019YFC1907405)supported by the National Key R&D Program of ChinaProject(GJJ200809)supported by the Education Department Project Fund of Jiangxi Province,ChinaProject(2020BAB214021)supported by the Natural Science Foundation of Jiangxi Province,China。
文摘Direct carbon solid oxide fuel cells(DC-SOFCs)are promising,green,and efficient power-generating devices that are fueled by solid carbons and comprise all-solid-state structures.Developing suitable anode materials for DC-SOFCs is a substantial scientific challenge.Herein we investigated the use of La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_(3)-δ−Ce_(0.8)Gd_(0.2)O_(1.9)(LSCM−GDC)composite electrodes as anodes for La_(0.9)Sr_(0.1)Ga_(0.8)Mg_(0.2)O_(3)-δelectrolyte-based DC-SOFCs,with Camellia oleifera shell char as the carbon fuel.The LSCM−GDC-anode DC-SOFC delivered a maximum power density of 221 mW/cm^(2) at 800℃ and it significantly improved to 425 mW/cm^(2) after Ni nanoparticles were introduced into the LSCM−GDC anode through wet impregnation.The microstructures of the prepared anodes were characterized,and the stability of the anode in a DC-SOFC and the influence of catalytic activity on open circuit voltage were studied.The above results indicate that LSCM–GDC anode is promising to be applied in DC-SOFCs.
基金The project is supported by the National Natural Science Foundation of China (20576023)the Science and Technology Project of Guangzhou City (2005 J1-C0361)the Key Project of Education Bureau of Guangzhou City (2052).
文摘Carbon nanotubes （CNTs） supported Pt-Ru and Pt-Ru-Ni catalysts were prepared by chemical reduction of metal precursors with sodium borohydride at room temperature. The crystallographic properties and composition of the catalysts were characterized by X-ray diffraction （XRD） and energy dispersive X-ray （EDX） analysis, and the catalytic activity and stability for methanol electro-oxidation were measured by electrochemical impedance spectroscopy （EIS）, linear sweep voltammetries （LSV）, and chronoamperometry （CA）. The results show that the catalysts exhibit face-centered cubic （fcc） structure. The particle size of Pt-Ru-Ni/CNTs catalyst is about 4.8 nm. The catalytic activity and stability of the Pt-Ru-Ni/CNTs catalyst are higher than those of Pt-Ru/CNTs catalyst.
文摘Platinum/Carbon XC72R （Pt/C） nanocomposite was synthesized in-situ by polyol method. Precursor of hexahydrated chloroplatinic acid H2PtCI6-6H2O was reduced by EG （ethylene glycol） so as to form Pt nanoparticles which were deposited on the surface of carbon. Pt/C composites （treated or untreated carbon） were synthesized at pH - 6.5 and pH = 11. The XRD pattern of Pt/C showed peaks assigned to the crystalline structure of Pt and carbon. TEM images showed that Pt nanoparticles on carbon were ultrafine spheres and the particles obtained sizes from 2 to 6 nm which are mostly concentrated on size of 3 nm. The electrocatalytic activity of Pt/C catalysts toward methanol oxidation was examined by CV （cyclic voltammetry）. Pt/treated XC72R （pH = 11） at potential （0.69 V） exhibited better electroactivity （628 mA/mg Pt）.
基金Project(50573041)supported by the National Natural Science Foundation of China
文摘Platinum nanoparticles supported on carbons（Pt/C,60%,mass fraction） electrocatalysts for direct methanol fuel cell（DMFC） were prepared by citrate-stabilized method with different reductants and carbon supports.The catalysts were characterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM） and cyclic voltammetry（CV）.It is found that the size of Pt nanoparticles on carbon is controllable by citrate addition and reductant optimization,and the form of carbon support has a great influence on electrocatalytic activity of catalysts.The citrate-stabilized Pt nanoparticles supported on BP2000 carbon,which was reduced by formaldehyde,exhibit the best performance with about 2 nm in diameter and 66.46 m2/g（Pt） in electrocatalytic active surface（EAS） area.Test on single DMFC with 60%（mass fraction） Pt/BP2000 as cathode electrocatalyst showed maximum power density at 78.8 mW/cm2.
基金supported by the International Science and Technology Cooperation Program of China (No. 2006DFA61240)
文摘To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the preparation of Pt/CNTs@TiO2 and Pt-Mo/CNTs@TiO2 electrocatalysts via a UV-photoreduction method.The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction （XRD）,transmission electron microscopy （TEM）,X-ray photoelectron spectroscopy （XPS）,and infrared spectroscopy of adsorbed probe ammonia molecules.The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique.The results show that Pt-Mo/CNTs@TiO2 electrode exhibits the highest performance in all the electrodes.It is explained that,the structure,the oxidation states,and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO2 and MoOx to the Pt-based catalysts.
基金financial support of the National Natural Science Foundation of China(Nos.51672045 and 11374053)Key Program of Universityindustry Collaboration from Science and Technology Department of Fujian Province(No.2015H6009)
文摘In this study, hydrothermal carbonization(HTC)was applied for surface functionalization of carbon nanotubes(CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carbon layers on the surface of the CNTs. By controlling the ratio of glucose to urea, nitrogen contents of up to 1.7 wt%were achieved. The nitrogen-doped carbon nanotube-supported Pd catalysts exhibited superior electrochemical activity for ethanol oxidation relative to the pristine CNTs.Importantly, a 1.5-fold increase in the specific activity was observed for the Pd/HTC-N1.67%CNTs relative to the catalyst without nitrogen doping(Pd/HTC-CNTs). Furtherexperiments indicated that the introduction of nitrogen species on the surface of the CNTs improved the Pd(0)loading and increased the binding energy.
基金the financial support of this study by the Ph.D.Student Research and Innovation Fund of the Fundamental Research Funds for the Central Universities(grant number GK6530260034)the National Natural Science Foundation of China(grant numbers:51572052)。
文摘Urea oxidation is a significant reaction for utilizing urea-rich wastewater or human urine as sustainable power sources which can ease the water eutrophication while generate electricity. A direct urea-hydrogen peroxide fuel cell is a new kind of fuel cell employing urea as fuel and hydrogen peroxide as oxidant which possesses a larger cell voltage. Herein, this work tries to promote the kinetics process of urea oxidation by preparing low-cost and high-efficient NiCo2S4 nanowires modified carbon sponge electrode. The carbon sponge used in this work with a similar three-dimensional multi-channel structure to Ni foam, is prepared by carbonizing recycled polyurethane sponge which is also a process of recycling waste. The performance of the prepared catalyst in an alkaline solution is investigated in a three-electrode system.With the introduction of Co element to the catalyst, a reduced initial urea oxidation potential and a high performance are obtained. Furthermore, a direct urea-hydrogen peroxide fuel cell is assembled using the NiCo2S4 nanowires modified carbon sponge anode. Results indicate that the prepared catalyst provides a chance to solve the current problems that hinder the development of urea electrooxidation(high initial urea oxidation potential, low performance, and high electrode costs).
基金supported by the New&Renewable Energy Development Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)Grant Funded by the Korean Government’s Ministry of Knowledge Economy(20113020030010)
文摘This work describes the performance of the direct carbon fuel cell(DCFC)fuelled by ash-free coal.Employing coal in the DCFC might be problematic,mainly because of the ash deposition after the cell reactions.In the study,the carbonaceous ash-free component of coal is obtained,which is then evaluated as the DCFC fuel and compared with raw coal,active carbon,carbon black,and graphite.The electrolyte-supported SOFC structure is adapted to build the DCFC.The DCFC based on the ash-free coal fuel exhibits good performance with regard to the maximum power density,day-by-day measurements,and durability at continuous run.When the carbon fuels are internally gasified to H2 and CO,the power density is generally much improved,compared to N2 pyrolysis environment.The power generation is most likely related to the concentration of pyrolyzed gases as well as the electrochemical reactivity of the solid carbon.
基金CNP_q,FAPESPFINEP-MCT-ProH_2 for financial support
文摘Ni/Carbon was prepared in two steps： initially cellulose as carbon source and NiCl2·6H2O as catalyst of the carbonization process were submitted to hydrothermal treatment at 200 ℃ and further to thermal treatment at 900 ℃ under argon atmosphere. The obtained material contains Ni nanoparticles with face-centered cubic （fcc） structure dispersed on amorphous carbon with graphitic domains. PtRu/C electrocatalysts （carbon- supported PtRu nanoparticles） were prepared by an alcohol-reduction process using Ni/Carbon as support. The materials were characterized by thermogravimetric analysis, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and tested as anodes in single direct methanol fuel cell （DMFC）. The performances of PtRu/C electrocatalysts using Ni/Carbon as support were superior to those obtained for PtRu/C using commercial carbon black Vulcan XC72 as support.
文摘In this study, carbon nanotubes （CNTs） were mixed with ABs-type hydrogen storage alloy （HSA）, as catalyst for an anode in a direct borohydride fuel cell （DBFC）. As comparision, a series of traditional carbon materials, such as acetylene black, Vulcan XC-72R, and super activated carbon （SAC） were also employed. Electrochemical measurements showed that the electrocatalytic activity of HSA was improved greatly by CNTs. The current density of the DI3FC employing the HSA/CNTs catalytic anode could reach 1550 mA.cm-2 （at -0.6 V vs the EIg/HgO electrode） and the maximum power density of 65 mW.cm-2 for this cell could be achieved at room temperature. Furthermore, the life time test lasting for 60 h showed that the cell displayed a good stability.
基金support for this work was provided by the National Natural Science Foundation of China （No. 20976044）, the Fundamental Research Funds for the Central Universities （No. WK1013001）, Shanghai Leading Academic Discipline Project （No. B502）.
文摘Nanoporous carbon/graphene composites （NCGC） are synthesized via one-step hydrothermal approach com- bining carbonization, where phenol and formaldehyde are used as carbon sources and triblock copolymers F 127 as template. Transmission electron microscopy （TEM） and nitrogen adsorption measurements show that the synthe- sized NCGC samples possess high surface area over 400 m2·g-1 and mesoporous structures with interconnected pores. The electrochemical studies demonstrate that Pt catalyst with NCGC as support exhibits better eletrocatalytic activity for methanol oxidation as compared to the catalyst taking widely-used VulcanXC-72 as support. In addition, the potential formation mechanism of NCGC is discussed.
基金supported by the National Natural Science Foundation of China (Grant Nos. 20676032,20876062)
文摘Highly dispersed,high performance Pt and PtRu catalysts,supported on multiwalled carbon nanotubes(CNTs),were prepared by a high pressure organic colloid method.The particle sizes of the active components were as small as 1.2 nm for Pt and 1.1 nm for PtRu,and the active Pt surface areas were 295 and 395 m2/g,respectively.The catalysts showed very high activities toward the anodic oxidation of methanol,evaluated by cyclic voltammetry,being up to 4 times higher than that of commercial Johnson Matthey Hispec 2000 Pt/XC-72R and 5 times better than Hispec 5000 PtRu/XC-72R catalysts.In a full air/hydrogen fuel cell,a membrane-electrode assembly prepared using our Pt/CNT and PtRu/CNT catalysts showed 50% and 100% higher performances than those prepared with commercial Johnson Matthey Pt/XC-72R and PtRu/XC-72R catalysts for the same Pt loading and operating conditions.
