Effects of direct current electric field on corrosion behaviour of copper, Cl- ion migration behaviour and dendrites growth under thin electrolyte layer

Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.

Grain refinement of pure aluminum by direct current pulsed magnetic field and inoculation

The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.

Influence of Electric Field Direction on Enhanced Transdermal Delivery of Caffeine by Electroporation

Aim To study the influence of electric field direction on the in vitro enhanced transdermal delivery of caffeine by eleetroporation. Methods Using side-by-side compartment diffusion cells method and Ag-Ag/AgCl electrodes, the transport of caffeine through human cadaver skin by electroporation （exponentially decaying pulse, pulse voltage = 350 V, pulse frequency = 4 pulses· min^-1, capacity = 22 μF, pulse length = 7 ms, 25 pulses） with different electric field directions was carried out and compared with passive diffusion and iontophoresis （0.25 mA·cm^ - 2, lasted for 4 h）. Results （i） The cumulative quantity and flux of caffeine through human skin were increased significantly by eleetroporation or iontophoresis. （ii） The transport of caffeine by positive iontophoresis （ with electric field from donor to receptor compartment） was significantly greater than that by negative iontophoresis （with electric field from receptor to donor compartment）. （iii） The transport of caffeine by positive eleetroporation （with electric field from donor to receptor compartment） was similar to that by negative eleetroporation （with electric field from receptor to donor compartment）. （iv） The enhancing effect of positive iontophoresis on the transdermal delivery of caffeine was significantly greater than that of electroporation （positive or negative）. Conclusion Electric field direction significantly influences the enhancing effect of iontophoresis on the transdermal delivery of caffeine, but does not influence the enhancing effect of eleetroporation.

Control Efficiency and Crop Safety of 20% Cyhalofop-butyl WP on Grass Weeds in Direct Seeded Rice Fields

The purpose was to define the control efficiency and safety of 20% cy- halofop-butyl WP on grass weeds in direct seeded rice fields, in order to provide the basis for chemical weeding. This study measured Leptochloa chinensis（L.） Nees, Echinoch/oa crusgalli （L.） Beauv and other gramineous weed control efficiency with four concentrations of 20% cyhalofop-dutyl WP and 100 g/L cyhalofop-dutyl EC in direct seeded rice fields, and analyzed the yield-increasing effect and safety of rice. The results showed that 20% cyhalofop-butyl WP had a good control efficiency on grass weeds such as Leptochloa chinensis（L.） Nees, Echinoch/oa crusgalli（L.） Beauv and other grasses. The effective dosage of 90-150 g/hm2 was over 90.7% on Lep- foch/oa chinensis（L.） Nees and the comprehensive control effect of the grass weeds was above 86.7%, which was basically consistent with 100 g/L cyhalofop-dutyl EC. Furthermore, 20% cyhalofop-dutyl WP was high security for direct seeded rice fields. The yield of rice was increased by 10.18%-11.22% after spraying herbicide. There- fore, 20% of cyhalofop-dutyl WP can be used as a special herbicide for controlling Leptochloa chinensis（L.） Beauv in direct seeded rice fields, and has a good applica- tion prospect.

Single Bubble Behavior in Direct Current Electric Field

The investigation on bubble behavior in electric field helps to analyze the mechanism of electric enhancement of boiling heat transfer. Experiments were performed to investigate the bubble deformation in direct current （DC） electric field with bubbles attached to the orifice. The air bubbles were slowly generated in the transformer oil pool at different orifices, so that the effect of flow on bubble shape was eliminated. The results showed that the bubbles were elongated and the departure volume decreased when the electric field was intensified. The major and minor axes, aspect ratio and departure volume increased with increasing the orifice diameter. Both the electric field and orifice size have great influence on bubble behavior. The bubble deformation was also simulated to compare with the experimental results. The numerical and experimental data qualitatively agree with each other.

Three-dimensional transformation of magnetization direction and magnetic field component at low latitudes based on vertical relationship

The transformation of the magnetization direction and the magnetic fi eld component is one of the important methods in magnetic data processing and transformation,which can be conducted in both wavenumber and spatial domains.The transformation method in the wavenumber domain has simpler processing expression and higher processing effi ciency than in the spatial domain;however,they are unstable at low latitude.In this paper,the conclusion that the sum is 0 of two vertical magnetic fi eld components(magnetization inclinations are also perpendicular)in 2D is used for the 3D transformation of the magnetization direction and the magnetic field component.In addition,the transformation method at low latitudes based on vertical relationship(VMT)is proposed,which is an iterative algorithm that converts the transformation of the magnetization direction and the magnetic field component at the low latitude into the high latitude.This method restrains the instability of transformation of constant and variable magnetization direction and magnetic fi eld components in low latitudes.The accuracy,stability,and practicality are verifi ed from synthetic models and real data.

Investigation on stability of directionally solidified CBr4-C2Cl6 lamellar eutectic by using multiphase field simulation

With the multiphase field method, the stability of lamellar basic state is investigated during the directional solidification of eutectic alloy CBr4-C2Cl6. A great number of lamellar patterns observed in experiments are simulated, and a stability diagram for lamellar pattern selections is presented. The simulated growth behaviours of these patterns are found to be qualitatively consistent with Karma et al＇s numerical calculations and experimental results. The formation of the primary instability is attributed to the destabilization of solute boundary layer.

Numerical Simulation of Multi-track and Multi-layer Temperature Field on Laser Direct Metal Shaping

To improve the mechanical properties of the parts fabricated by Laser Direct Metal Shaping(LDMS),it is of great significance to understand the distribution regularities of transient temperature field during LDMS process.Based on the“el- ement birth and death”technique of finite element method,a three-dimensional multi-track and multi-layer model for the transient temperature field analysis of LDMS is developed by ANSYS Parametric Design Language(APDL)for the first time.In the fab- ricated modal,X-direction parallel reciprocating scanning paths is introduced.Using the same process parameters,the simulation results show good agreement with the microstructure features of samples which fabricated by LDMS.

Phase-field simulation of formation of cellular dendrites and fine cellular structures at high growth velocities during directional solidification of Ti_(56) Al_(44) alloy

A phase-field model whose free energy of the solidification system derived from the Calphad thermodynamic modeling of phase diagram was used to simulate formation of cellular dendrites and fine cellular structures of Ti56Al44 alloy during directional solidification at high growth velocities. The liquid-solid phase transition of L→β was chosen. The dynamics of breakdown of initially planar interfaces into cellular dendrites and fine cellular structures were shown firstly at two growth velocities. Then the unidirectional free growths of two initial nucleations evolving to fine cellular dendrites were investigated. The tip splitting phenomenon is observed and the negative temperature gradient in the liquid represents its supercooling directional solidification. The simulation results show the realistic evolution of interfaces and microstructures and they agree with experimental one.

Phase-field simulation of secondary dendrite growth in directional solidification of binary alloys

Phase field method was used to simulate the effect of grains orientation angle θ_(11) and azimuth θ_A of non-preferentially growing dendrites on the secondary dendrites of preferentially growing dendrites. In the simulation process, two single-factor influence experiments were designed for columnar crystal structures. The simulation results showed that, when θ_(11) < 45o and θ_A < 45o, as θ_(11) was enlarged, the growth direction of the secondary dendrites on the preferentially growing dendrites at the converging grain boundary(GB) presented an increasing inclination to that of preferentially growing dendrites; with increasing θ_A, the growth direction of the secondary dendrites on the preferentially growing dendrites at the converging GB exhibited greater deflection,and the secondary dendrites grew with branches; the secondary dendrites on the preferentially growing dendrites at diverging GBs grew along a direction vertical to the growth direction of the preferentially growing dendrites.When θ_A = 45o and θ_(11) = 45o, the secondary dendrites grew in a direction vertical to the growth direction of preferentially growing dendrites. The morphologies of the dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the effect of a grain's orientation angle and azimuth of non-preferentially growing dendrites on the secondary dendrites of preferentially growing dendrites does exist and frequently appears in the practical solidification process.

Effect of low frequency electromagnetic field on microstructures and macrosegregation of horizontal direct chill casting aluminum alloy

The influences of low frequency electromagnetic field on cast surface, microstructures and macrosegregation in horizontal direct chill(HDC) casting process were investigated experimentally. The cast surfaces, microstructures and macrosegregation of the ingots manufactured by conventional HDC and low frequency electromagnetic HDC casting were compared. The results show that low frequency electromagnetic field significantly improves the surface quality, refines the microstructures and reduces macrosegregation. Further more, increasing electromagnetic intensity or decreasing frequency is beneficial to the improvement. In the range of ampere-turns and frequency employed in the experiments, the optimum ampere-turns is found to be 10 000 A·turn and the frequency to be 30 Hz.

Chemical Weeding in Dry Direct Seeding Fields of Single Cropping Middlelate Rice

Chemical weeding in dry direct seeding fields of single cropping middle-late rice was studied in Huida vegetable farm of Huizhou City in 2012. The main treatment was herbicide（ pretilachlor ＋ bensulfuron-methyl,Yangguo and butachlor）,and the sub-treatment was application method（ soil treatments,seedling treatment and integrated treatment）. The results showed that 80 g pretilachlor ＋ bensulfuron-methyl（ 36% pretilachlor ＋ 4% bensulfuron-methyl） diluted with 50 kg water could be sprayed or 200 g Yangguo（ 23. 9% butachlor ＋ 1. 1% bensulfuron-methyl） mixed with 15 kg sandy soil could be broadcasted per 667 m2 on the sowing day or the second day under moist condition of soil,which could effectively control weeds in dry direct seeding fields of single cropping middle-late rice.

Phase-field simulation of competitive growth of grains in a binary alloy during directional solidification

Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional(3-D) phasefield method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Horizontal-Longitudinal Spatial Correlation of Acoustic Field with Deep Receiver in the Direct Zone in Deep Water

The horizontal-longitudinal correlation of acoustic field for the receiver near the bottom is analyzed by using nu- merical modeling. An approximate analytical solution of horizontal-longitudinal correlation coefficient is derived based on the ray method. Combining the characteristic of Lloyd＇s mirror interference pattern, the variability of acoustic field and its effect on horizontal-longitudinal spatial correlation are discussed. The theoretical pre- diction agrees well with the numerical results. Experimental results confirm the validity of analytical solution. Finally, the applicability of the analytical solution is summarized. The conclusion is beneficial for the design of bottom-moored array and the estimation of integral time for moving source localization.

A model for the response of wave directions in slowly turning wind fields

On the basis of the wave energy balance equation, the response model of mean directions of locally wind-generated waves in slowly turning wind fields has been derived. The results show that in a homogeneous field, the time scale of the response is not only related to the rate of wave growth, but also to the directional energy distribution and the angle between the wind direction and the mean wave direction. Furthermore, the law of change in the mean wave direction has been derived. The numerical computations show that the response of wave directions to slowly turning wind directions can be treated as the superposition of the responses of wave directions to a series of sudden small-angle changes of wind directions and the turning rate of the mean wave direction depends on the turning rate and the total turning angles of the wind direction. The response of wave directions is in agreement with the response for a sudden change of wind directions if the change in wind directions is very fast. Based on the normalized rates of wave growth under local winds presented by Wen et al. (1989), a quantitative estimate of the time scale of the response shows that the relationships between the dimensionless time scale and both the dimensionless total wave energy and the dimensionless peak frequency agree fairly well with the observations in comparison with other models.

Identification of Sources of Potential Fields with Directional Wavelet Transform:Application to Mineral Exploration

For the sustainable supply of mineral resources, blind deposits are becoming the emphasis of exploration after long-period exploitation of exposed deposits.The collection and analysis of gravity or magnetic data represents one of the cheapest forms of large-scale geophysical exploration.With the identification of potential fields,we can get the map of worms or skeletonizations showing the three-dimension structure of shallow crust,and find the

Identification of Potential Mineral Fields with Directional Wavelet Transform:Application to Mineral Exploration

For the sustainable supply of mineral resources, blind deposits are becoming the emphasis of exploration after long-period exploitation of exposed deposits.The collection and analysis of gravity or magnetic data represents one of the cheapest ways of large-scale geophysical exploration.With the identification of potential mineral fields,we can get the map of worms or skeletonizations showing

Rupture directivity and hanging wall effect in near field strong ground motion simulation

A random synthesis procedure based on finite fault model is adopted for near field strong ground motion simulation in this paper. The fault plane of the source is divided into a number of sub-sources, the whole moment magnitude is also divided into more sub-events. The Fourier spectrum of ground motion caused by a sub-event in given sub-source, then can be derived by means of taking the point source spectrum, attenuation with distance, energy dissipation, and near surface effect, into account. A time history is synthesized from this amplitude spectrum and a random phase spectrum, and being combined with an envelope function. The ground motion is worked out by superposition of all time histories from each sub-event in each sub-source, with time lags determining by the differences between the triggering times of sub-events and distances of the sub-sources. From the example of simulations at 21 near field points in a scenario earthquake with 4 dip angles of the fault plane, it is illustrated that the procedure can describe the rupture directivity and hanging wall effect very well. To validate the procedure, the response spectra and time histories recorded at three near fault stations MCN, LV3 and PCD during the Northridge earthquake in 1994, are compared with the simulated ones.

Effect of Low Frequency Electromagnetic Field on Macrosegregation of Horizontal Direct Chill Casting Aluminum Alloys

The horizontal direct chill (HDC) casting process is a well-established production route for aluminum alloy ingot but the ingot may suffer from macrosegregation sometimes. In order to control the defect, a low frequency electromagnetic field has been applied in HDC casting process and the relevant influence has been studied. The results show that application of low frequency electromagnetic field can reduce macrosegregation in HDC casting process; and two main parameters of electromagnetic field density and frequency, have great influences on the solution distribution along the diameter of ingot. Moreover, the mechanisms of reduction of macrosegregation by electromagnetic field have been discussed.

The Type of Low-yielding Fields,Using Direction and Land Fertility Building Measures in Suiping County

Using the evaluation indicator system for arable land fertility in Suiping County,this paper analyzes some factors influencing agricultural production,such as physical and chemical properties of soil,site conditions,soil management,and soil nutrients concerning various types of low-yielding fields in the county. In accordance with the dominant soil constraint factors and main direction of improvement,the lowyielding fields in the county are divided into four types: irrigation improvement type,waterlogging drainage type,barren soil fertilization and barrier layer type. Finally this paper offers specific guidance on the construction of arable land.