DIRECT DIGITAL DESIGN AND SIMULATION OF MESHING IN WORM-GEAR DRIVE

A direct digital design method （DDDM） of worm-gear drive is proposed. It is directly based on the simulation of manufacturing process and completely different from the conventional modeling method. The loaded tooth contact analysis （LTCA） method is analyzed, in which the advanced surface to surface searching technique is included. The influence of misalignment errors and contact deformations on contact zone and transmission error （TE） is discussed. Combined modification approach on worm tooth surface is presented. By means of DDDM and LTCA, it is very conven- ient to verify the effect of worm-gear drive＇s modification approach. The analysis results show that, the modification in profile direction reduces the sensitivity of worm-gear drive to misalignment errors and the modification in longitudinal direction decreases the TE. Thus the optimization design of worm-gear drive can be achieved prior to the actual manufacturing process.

Research on the direct damage-based seismic design method of RC frame structures

Based on the existing research, this paper presents an innovative methodology to realize direct damage-based seismic design for RC frame structures by mobilizing ESDOF theory and the damage-based strength reduction factor（RD factor）. A design example is then followed to verify this method.

COMPUTER PROGRAM FOR DIRECTED STRUCTURE TOPOLOGY OPTIMIZATION

To compensate for the imperfection of traditional bi-directional evolutionary structural optimization, material interpolation scheme and sensitivity filter functions are introduced. A suitable filter can overcome the checkerboard and mesh-dependency. And the historical information on accurate elemental sensitivity numbers are used to keep the objective function converging steadily. Apart from rational intervals of the relevant important parameters, the concept of distinguishing between active and non-active elements design is proposed, which can be widely used for improving the function and artistry of structures directly, especially for a one whose accurate size is not given. Furthermore, user-friendly software packages are developed to enhance its accessibility for practicing engineers and architects. And to reduce the time cost for large timeconsuming complex structure optimization, parallel computing is built-in in the MATLAB codes. The program is easy to use for engineers who may not be familiar with either FEA or structure optimization. And developers can make a deep research on the algorithm by changing the MATLAB codes. Several classical examples are given to show that the improved BESO method is superior for its handy and utility computer program software.

Mixture Toxicities of Three Pesticides Having Different Time-Toxicity Profiles

In the environment,chemical pollutants always exist as mixtures.To evaluate mixture toxicity,we should ex-amine the concentration ratios and the concentration levels of mixture components as well as the interactive time between the components and testing organism.Selecting three pesticides,metribuzin(MET),dodine(DOD)and ri-domil(RID),as mixture components,Vibrio qinghaiensis sp.-Q67 as testing organism,and 96-well microplate as exposure experiment carrier,the luminescence inhibition toxicities of the pesticides and their binary mixtures at six exposure time points(0.25,2,4,8,12,and 16 h)were determined.The results showed that the three pesticides have different time-toxicity profiles.The toxicity of MET increases over time,and those of DOD and RID show a slight decrease or increase in the first 4 h,respectively,and then remain unchanged to 16 h.The toxicities of the binary mixtures consisting of the three pesticides depend on not only the mixture composition but also the exposure time.The time-toxicity profiles of all rays in MET-DOD mixture system are U-shaped curves,those in MET-RID system are basically monotonically increased and those in DOD-RID system are basically monotonically decreased.How-ever,our findings indicate that for the test substances,mixture toxicity can be predicted by the extended concentra-tion addition model.

A Ka-band wide locking range frequency divider with high injection sensitivity

This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch transistor so that the divider locking range is extended efficiently. New insights into the locking range and output power are proposed. A new method to analyze and optimize the injection sensitivity is presented and a layout technique to reduce the parasitics of the cross-coupled transistors is applied to decrease the frequency shift and the locking range degradation. The circuit is designed in a standard 90-nm CMOS process. The total locking range of the ILFD is 43.8% at 34.5 GHz with an incident power of –3.5 dBm. The divider IC consumes 3.6 mW of power at the supply voltage of 1.2 V. The chip area including the pads is 0.50.5 mm2.

PSCAD Based Multi-infeed HVDC System Simulation Validated by a Recorded Fault

More and more high voltage direct current(HVDC) converters are being located in a load area in the Yangtze River Delta Region in China. It's large transmission capacity and intensive placement are hardly seen in other countries. Accurate and reliable study tools and methods are extremely needed for power system engineers and researchers to deal with such problems which were never met before and otherwhere. A novel approach on electromagnetic modeling of alternating current / direct current(AC/DC) system is proposed and simulation is carried out to replay a real AC 3-phase to ground fault on a multi-infeed high voltage direct current(MIHVDC) system. AC system is specially simplified. Dynamic models and real parameters are adopted in main AC/DC equipments concerned and retained. Modeling and simulation are based on the power system computer aided design/electro-magnetic transient in direct current(PSCAD/EMTDC) system software package.Comparisons between simulation results and the records from the fault recorders are studied including both AC and DC quantities.