The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than th...The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.展开更多
Core discing often occurs in deep rocks under high-stress conditions and has been identified as an important characteristic for deep rock engineering.This paper presents the formation mechanism of core discing firstly...Core discing often occurs in deep rocks under high-stress conditions and has been identified as an important characteristic for deep rock engineering.This paper presents the formation mechanism of core discing firstly.Then,the interaction between diamond drill bits and rock was analyzed based on numerical modeling.A novel drill bit with an inner conical crown for the mitigation of core discing was designed and verified by simulation experiments.The mitigation method was applied in the cavern B1 of CJPL-Ⅱand satisfactory results had been achieved.The percentage of core discing had been obviously decreased from 67.8%when drilling with a rectangular crown drill bit,to 26.5%when an inner conical crown drill bit had been adopted.This paper gives full insight into core discing characteristics and provides a new method for core discing mitigation;it will potentially contribute to stress measurement in deep rock engineering.展开更多
文摘The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.
基金Projects(U1765206,51979268,51621006)supported by the National Natural Science Foundation of China。
文摘Core discing often occurs in deep rocks under high-stress conditions and has been identified as an important characteristic for deep rock engineering.This paper presents the formation mechanism of core discing firstly.Then,the interaction between diamond drill bits and rock was analyzed based on numerical modeling.A novel drill bit with an inner conical crown for the mitigation of core discing was designed and verified by simulation experiments.The mitigation method was applied in the cavern B1 of CJPL-Ⅱand satisfactory results had been achieved.The percentage of core discing had been obviously decreased from 67.8%when drilling with a rectangular crown drill bit,to 26.5%when an inner conical crown drill bit had been adopted.This paper gives full insight into core discing characteristics and provides a new method for core discing mitigation;it will potentially contribute to stress measurement in deep rock engineering.
