Thermal fatigue and wear of compacted graphite iron brake discs with various thermomechanical properties

The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical properties.Compacted graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of ferrite.The peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction tests.The morphology of thermal cracks and 3D profiles of the worn surfaces were also discussed.It is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue resistance.Oxidization of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal cracks.Despite the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.

Sustainable Biocomposites Materials for Automotive Brake Pad Application:An Overview

Research into converting waste into viable eco-friendly products has gained global concern.Using natural fibres and pulverized metallic waste becomes necessary to reduce noxious environmental emissions due to indiscriminately occupying the land.This study reviews the literature in the broad area of green composites in search of materials that can be used in automotive brake pads.Materials made by biocomposite,rather than fossil fuels,will be favoured.A database containing the tribo-mechanical performance of numerous potential components for the future green composite was established using the technical details of bio-polymers and natural reinforcements.The development of materials with diverse compositions and varying proportions is now conceivable,and these materials can be permanently connected in fully regulated processes.This explanation demonstrates that all of these variables affect friction coefficient,resistance to wear from friction and high temperatures,and the operating life of brake pads to varying degrees.In this study,renewable materials for the matrix and reinforcement are screened to determine which have sufficient strength,coefficient of friction,wear resistance properties,and reasonable costs,making them a feasible option for a green composite.The most significant,intriguing,and unusual materials used in manufacturing brake pads are gathered in this review,which also analyzes how they affect the tribological characteristics of the pads.

Numerical and Experimental Analysis of the Aerodynamic Torque for Axle-Mounted Train Brake Discs

As the velocity of a train increases,the corresponding air pumping power consumption of the brake discs increases proportionally.In the present experimental study,a standard axle-mounted brake disc with circumferential pillars was analyzed using a 1:1 scale model and a test rig in a wind tunnel.In particular,three upstream velocities were selected on the basis of earlier investigations of trains operating at 160,250,and 400 km/h,respectively.Moreover,3D steady computational fluid dynamics(CFD)simulations of the flow field were conducted to compare with the wind tunnel test outcomes.The results for a 3-car train at 180 km/h demonstrated:(1)good agreement between the air resistance torques obtained from the wind tunnel tests and the related numerical results,with differences ranging from 0.95%to 5.88%;(2)discrepancies ranging from 3.2 to 3.8 N·m;(3)cooling ribs contributing more than 60%of the air resistance torque;(4)the fast rotation of brake discs causing a significantly different flow field near the bogie area,resulting in 25 times more air pumping power loss than that obtained in the stationary brake-disc case.

Brake Discs Surface Defect Detection Using the IGD-IHT Algorithm and the PIQEDS-ISSA-NESN Algorithm

As one of the core parts, the brake discs directly impact the braking and safety performance of vehicles. Traditional surface detection methods of the brake disc have poor robustness due to their reliance on manual feature extraction. A detection instrument was designed to focus on the detection. The features were extracted using the improved Gaussian difference algorithm and Hough transform algorithm(IGD-IHT). An identification method for brake disc surface defects was designed in this paper based on the Perception-based Image Quality Evaluator and Dempster rule-improved sparrow search algorithm-Nonlinear echo state network(PIQEDS-ISSA-NESN) to better identify. It was shown in the experiment that the accuracy was more than 97%, the false alarm rate was less than 1.5%, and the false alarm rate was less than 1.5%.

Sepiolite:A new component suitable for 380 km/h high-speed rail brake pads

To enhance the high-temperature adaptability of copper-based composite materials and C–C/SiC discs,this article innovatively introduces a method of replacing graphite with sepiolite,resulting in the successful fabrication of samples with exceptional mechanical and friction properties.The results reveal that moderate incorporation(less 6%)of sepiolite provides a particle reinforcement effect,resulting in an improvement of mechanical properties.Interestingly,the addition of sepiolite causes a change in the traditional saddle-shaped friction curve due to high temperature lubrication.Meanwhile,the primary advantage of sepiolite lies in its superior abrasion resistance,evident in the increased friction coefficient and altered wear mechanisms with higher sepiolite content.The wear resistance is optimal at 200 Km/h(400℃).Particularly,the unique composition of the friction layer(outermost layer:a composite film consisting of B2O3,sepiolite,graphite,and metal oxide films;intermediate layer:metal oxide films)plays a pivotal role in improving friction stability.Finally,there are significant optimizations in the GA algorithm,especially GA-GB model has the best prediction effect on the maximum friction temperature.

轮毂电动机驱动车辆并联式复合制动策略

基于并联式轮毂电动机驱动实车构型,分析影响制动能量回收效率的主要因素,采用联邦卡尔曼滤波纵向车速估计算法,提出了三层式复合制动控制策略.该策略中的制动决策层根据踏板输入信号和行驶状态来识别制动工况,并进入相应的制动模式.制动控制层根据制动决策层的指令,在常规制动工况下通过粒子群优化(PSO)算法优化前、后轮电制动力矩分配,实现电池有效回收效率最大化;紧急制动工况下,通过模糊自整定PID算法实现车辆在不同附着路面上各轮滑移率的安全有效控制,优化了制动防抱死控制的鲁棒性,提高制动安全性.制动执行层响应制动控制层的指令,设计了电制动补偿机制,以迅速补偿调节各轮轮缸的压力误差,提高车辆制动稳定性.最后实车验证了该复合控制策略的有效性.

Thermal analysis for brake disks of SiC/6061 Al alloy co-continuous composite for CRH3 during emergency braking considering airflow cooling

The mass of high-speed trains can be reduced using the brake disk prepared with SiC network ceramic frame reinforced 6061 aluminum alloy composite （SiCn/Al）. The thermal and stress analyses of SiCn/Al brake disk during emergency braking at a speed of 300 km/h considering airflow cooling were investigated using finite element （FE） and computational fluid dynamics （CFD） methods. All three modes of heat transfer （conduction, convection and radiation） were analyzed along with the design features of the brake assembly and their interfaces. The results suggested that the higher convection coefficients achieved with airflow cooling will not only reduce the maximum temperature in the braking but also reduce the thermal gradients, since heat will be removed faster from hotter parts of the disk. Airflow cooling should be effective to reduce the risk of hot spot formation and disc thermal distortion. The highest temperature after emergency braking was 461 °C and 359 °C without and with considering airflow cooling, respectively. The equivalent stress could reach 269 MPa and 164 MPa without and with considering airflow cooling, respectively. However, the maximum surface stress may exceed the material yield strength during an emergency braking, which may cause a plastic damage accumulation in a brake disk without cooling. The simulation results are consistent with the experimental results well.

Distribution and Dissipation of Braking Power of Wet Multidisc Brake

To study the distribution and dissipation of braking power of wet multidisc brake and determine thermal load and thermal flux distribution between mated discs, the concept of distributing brake power four times was put forward. The third and the fourth distribution of brake power were calculated by using finite element(FE) software ANSYS. The third and the fourth distribution of wet multidisc brake are mainly related to material characteristics of discs during emergency braking, while most of the braking power is carried off during continuous braking. Basis is provided for further analysis of disc failure and applicability of different friction materials.

基于剩余碰撞时间的线控制动分层控制策略

针对不同制动工况需求的制动策略存在差异的情况,提出一种线控制动分层控制策略.在该分层策略的上层,利用二阶TTC安全碰撞时间模型计算出车辆与前车的剩余碰撞时间,以此作为依据进行制动策略的选取,并建立了汽车二自由度模型、车身法向受力模型和Burckhardt轮胎模型;在该分层策略的下层,进行了制动力在轮间的分配,使用序列二次规划(SQP)方法,分别在一般制动、紧急制动、失稳制动3种工况下,以轮胎滑移率为对象建立优化函数,对车辆制动力进行了优化分配.使用MATLAB/Simulink和Carsim进行了联合仿真,对所提出3种工况下的制动分配策略进行了有效性验证.结果表明:在一般制动工况下,采用该策略时相比对照工况制动距离减少18.08%,制动时间减少25.12%;在紧急制动工况下,采用该策略时相比对照工况制动距离减少19.17%,制动时间减少12.79%;在失稳制动工况下,该策略可通过轮胎差扭来提升车辆的横向稳定性.采用文中制动策略显著提升了车辆的制动效能.

星形超曲面上Hamilton系统Brake轨道的多重存在性

研究Hamilton系统具有固定能量的brake轨道的个数问题.在适当条件下,证明了R2n中紧星 形超曲面∑上brake轨道的几个多重存在性定理,结果包含了Szulkin的已有结论.

正定型超曲面上Hamilton系统Brake轨道的存在性

结合Rabinowitz和Szulkin关于Brake轨道的存在性与多重性的结论,利用部分对称泛函的临界点理论研究Hamilton系统在更广泛的能量面上Brake轨道的存在性问题.在适当条件下,证明了R2n中正定型超曲面Σ上存在Hamilton系统的Brake轨道.由于星型超曲面是正定型超曲面的特殊情形,该研究包含了Rabinowitz的相应结论.

高性能驱动系统在复杂工况下下运带式输送机的实现

下运带式输送机在复杂工况下需要具备稳定的运行性能和承载能力,能够适应各种突发情况并确保安全可靠的输送作业。对下运带式输送机上可控启动传输装置(CST)的应用进行了深入研究,通过项目验证高性能驱动系统的稳定性和可靠性,降低了能耗,为相关领域的研究提供了重要的理论和实践参考。

指标理论及星形Hamiltonian系统多个次brake轨道的存在性

利用Ｚｐ指标理论定义了一种相对Ｚｐ指标，并应用它研究了星形能量面上Ｈａｍｉｌｔｏｎｉａｎ系统多个次闸轨道的存在性，从而改进了Ｓｚｕｌｋｉｎ的结果。

Full Power Hydraulic Brake System Based on Double Pipelines for Heavy Vehicles

The hydraulic caliper disc brake system with air-over-oil is widely adopted at present for heavy vehicles,which makes use of air pressure system propelling the hydraulic pressure system acting on friction plates divided and combined for braking.There are some disadvantages such as pneumatic components failure,dust polluted and produce lots of heat in hydraulic caliper disc brake system.Moreover,considering the demands of the high speed,heavy weight,heavy load and fast brake of heavy vehicles,the full power hydraulic brake system based on double pipelines for heavy vehicles is designed and analyzed in this paper.The scheme of the full power hydraulic brake system,in which the triloculare cylinder is controlled by dual brake valve,is adopted in the brake system.The full power hydraulic brake system can accomplish steering brake,parking brake and emergent brake for heavy vehicles.Furthermore,electronic control system that is responsible for coordinating the work of hydraulic decelerator and hydraulic brake system is developed for different speed brakes.Based on the analysis of the influence of composed unit and connecting pipeline on braking performance,the nonlinear mathematic model is established for the full power hydraulic brake system.The braking completion time and braking pressure in braking performance of the double-pipeline steering brake and parking brake are discussed by means of simulation experiments based on Matlab/Simulink,and the simulation results prove that the braking performance of steering brake and parking brake meets the designing requirement of the full power hydraulic brake system.Moreover,the test-bed experiments of the brake system for heavy vehicles are carried out.The experimental data prove that the braking performance achieves the goal of the design,and that the full power hydraulic brake system based on double pipelines can effectively enhance braking performance,ensure braking reliability and security for heavy vehicles.

Opening Angle Rules of the Aerodynamic Brake Panel

In order to get the relationship between aerodynamic brake effect and the opening angle,based on a high-speed train model in CFD software FLUENT,the aerodynamic force properties from brake panels with different opening angles were analyzed as well as the flow field's variation laws. Six cases were researched,taking opening angles 45°,60°,75°,80°,85° and 90° respectively.Three-dimensional Reynolds-average Navier-Stokes equation combined with k-ε turbulence model was utilized. The control equation was discretized and solved by finite volume method.SIMPLE method was also considered to couple the pressure and velocity fields and search the numeric solutions. Conclusions can be achieved from the results which are shown as follows. When the opening angle increases from 45° to 75°,the aerodynamic forces and the central area with larger pressure increase fast,and the flow field distribution changes greatly; when the opening angle increases from75° to 90°,the aerodynamic forces and the central area with larger pressure increase slowly, and the flow field distribution changes slightly; considering train boundary and opening performance of the wind resistance brake mechanism,the opening angle should be 75°.

Computer aided design and analysis of a tunable muzzle brake

This research work deals with the design of a tunable muzzle brake [10] for a rifle chambered in 5.56 x 45 NATO ammunition. It proposes to solve the problem of handling differences from shooter to shooter by incorporating the feature of tunability. Beside this, it also solves the problem of requirement of optimum recoil in short recoil weapons. This innovation gives this design an edge over its already existing counterparts in the market. The product is designed using the internal ballistics calculations and the investigations been performed using solidworks flow simulation tool and ANSYS static structural to check the parameters like velocity distribution, pressure growth, and muzzle brake force along the series of ports and comparison of the so found results with those devised by the authors of the documents mentioned in references. This assures the market adaptability of the product for satisfactory performance, when brought among its already existing counterpart, though with a slight edge over them due to tunability. The results so found shall be concluded satisfactory regarding the performance of muzzle brake.

Transient Temperature Field Analysis of Brake in Nonaxisymmetric Three-dimensional Model

The disk-pad brake used in automobile is divided i nt o two parts: the disk, geometrically axisymmetric, and the pad, of which the geo metry is three-dimensional. In the course of braking, all parameters of the pro cesses (velocity, load, temperature, physicomechanical and tribological characte ristics of materials of the couple, and conditions of contacts) vary with the ti me. Considerable evidence has show that the contact temperature is an integral f actor reflecting the specific power friction influence at the combined effect of load, speed, friction coefficient, thermo physical and durability properties of materials of a frictional couple. Furthermore, the physic mechanical state of t he interface of the disk and pads is determined not only by the contact temperat ure but also by the nonstationary temperature field. Using the two-dimensional model for thermal analysis implies that the contact conditions and frictiona l heat flux transfer are independent of θ. This may lead to false thermal elast ic distortions and unrealistic contact conditions. An analytical model is presen ted in this paper for the determination of contact temperature distribution on t he working surface of a brake. To consider the effects of the moving heat source (the pad) with relative sliding speed variation, a transient finite element tec hnique is used to characterize the temperature fields of the solid rotor with ap propriate thermal boundary conditions. And the transient heat conduction problem can be solved as a nominal 3-D transient heat transfer problem with an immovab le heat source. Numerical results shows that the operating characteristics of th e brake exert an essentially influence on the surface temperature distribution a nd the maximal contact temperature. The temperature field presents a noaxisymmet ric characteristic (a function of θ) and proves to be strongly localized and po ssesses a sharp gradient in both axial and radial directions.

RESEARCH ON DESIGN METHOD OF A MULTIPLE DISC WET BRAKE IN LUBRICATED ENVIRONMENT

The rmomechanical phenomens occurring between friction pairs greatly changethe distributions of lining pressure and friction surface temperature of a multiple disc wet brake.It has become one of the main causes of brake failure. In order to understand these thermomechanicalphenomena, several design and material factors that have great influence on thermomechanicalphenomena, such as heat transfer coefficient, friction factor; sliding velocity, initial liningpressure and so on, are analyzed. An isothermal design method is proposed for designing a multipledisc wet brake.

Comparative Study on the Complex Eigenvalue Prediction of Brake Squeal by Two Infinite Element Modeling Approaches

The complex eigenvalue analysis is currently a common approach to predict squealing vibration and noise. There are two methods for modeling friction contact in the complex eigenvalue analysis of friction systems. In one method, contact springs are used to simulate friction contact. In another method, no contact spring is used. However, it has been uncertain whether these two modeling methods can predict approximately identical results. In order to clarify the uncertainty, two finite element models of the same brake system for the brake squeal prediction are established and simulated by using ABAQUS and NASTRAN software tools, respectively. In the ABAQUS model, friction coupling is applied to determine normal contact force and no contact spring is assumed. Whilst in the NASTRAN model, the contact spring is assumed by the penalty method to simulate contact connection. Through the numerical simulations, it is recognized that even if the same mesh geometry is applied, generally, these two finite element approaches are not capable of predicting approximately identical unstable frequencies. The ABAQUS approach can predict instabilities of high frequency up to 20 kHz or more, while the NASTRAN approach can only predict some instabilities of high frequency, not all. Moreover, the simulation results also show that both the contact spring stiffness and mesh size have influences to some extent on the prediction results of squeal. The present comparative work illuminates that the modeling method without contact springs is more suitable to predict squealing vibration and noise, comparing to the modeling method with contact springs. It is proposed that one should prefer using the modeling method without contact springs to predict squealing vibration and noise. The proposed study provides the reference for predicting squealing vibration and noise.

RELIABILITY ANALYSIS OF CRANE BRAKE PARAMETERS

The high failure rate of crane brake results from improper choice of brakingtorque. The mathematical model of reliability for the crane brake parameters is introduced. Based onlarge amount of actual data the parameter reliabilities of 5 approx 50 t general overheadtravelling cranes are calculated, the probabilities that the braking torque is less than the statictorque acting on the axle when the load moves down are obtained. Moreover, the ways to improve thereliability of brake parameters are discussed, the most reasonable values of braking safetycoefficient are given.