This paper proposes a linear frequency modulation (LFM signal) and biphase coding (BC signal) mixed modulation signal called LFM-BC signal. LFM-BC signal has both LFM signal and BC signal two kinds of traditional sign...This paper proposes a linear frequency modulation (LFM signal) and biphase coding (BC signal) mixed modulation signal called LFM-BC signal. LFM-BC signal has both LFM signal and BC signal two kinds of traditional signal advantages but makes up for their shortcomings. In this paper, LFM-BC signal, LFM and BC signals are studied and compared from the time characteristic and frequency characteristic of the signal, fuzzy function, pulse compression and Doppler characteristics and low probability of interception (LPI) characteristics.展开更多
The microscopic structure change rule in high speed steel (HSS) after an additional cryogenic treatment was studied in this paper. Highly dispersed nano-carbide (η-Fe2 C)separated from tempering martensite was found ...The microscopic structure change rule in high speed steel (HSS) after an additional cryogenic treatment was studied in this paper. Highly dispersed nano-carbide (η-Fe2 C)separated from tempering martensite was found distributed on twin planes of martensite and dislocation places. Retained austenite was found sheared into martensite and nano-carbide separated at the same time. In addition, the tempering martensite was fine-grained. The stated changes of HSS evidently improve the lifespan of HSS cutter and fully show the advantages of nano-structure. The cryogenic treatment of HSS also improves the roughness of HSS cutter (decrease Ra number by about 50%) and greatly increases the wear resistance of HSS cutter. Further experiments on the wear characteristic of HSS cutter supported the findings mentioned above. The stated HSS treatment technology would implement nano-structure of traditional tool steel through phase change. It could be a new method to improve the performance of HSS cutter.展开更多
An experimental study is made on the resistance characteristic ofthe dense extrusion flow with pulverized coal and nitrogen as medium in thispaper. Through the analysis of gas compressibility , solids continuity and l...An experimental study is made on the resistance characteristic ofthe dense extrusion flow with pulverized coal and nitrogen as medium in thispaper. Through the analysis of gas compressibility , solids continuity and lam-mar flow of both gas and solids, a展开更多
文摘This paper proposes a linear frequency modulation (LFM signal) and biphase coding (BC signal) mixed modulation signal called LFM-BC signal. LFM-BC signal has both LFM signal and BC signal two kinds of traditional signal advantages but makes up for their shortcomings. In this paper, LFM-BC signal, LFM and BC signals are studied and compared from the time characteristic and frequency characteristic of the signal, fuzzy function, pulse compression and Doppler characteristics and low probability of interception (LPI) characteristics.
文摘The microscopic structure change rule in high speed steel (HSS) after an additional cryogenic treatment was studied in this paper. Highly dispersed nano-carbide (η-Fe2 C)separated from tempering martensite was found distributed on twin planes of martensite and dislocation places. Retained austenite was found sheared into martensite and nano-carbide separated at the same time. In addition, the tempering martensite was fine-grained. The stated changes of HSS evidently improve the lifespan of HSS cutter and fully show the advantages of nano-structure. The cryogenic treatment of HSS also improves the roughness of HSS cutter (decrease Ra number by about 50%) and greatly increases the wear resistance of HSS cutter. Further experiments on the wear characteristic of HSS cutter supported the findings mentioned above. The stated HSS treatment technology would implement nano-structure of traditional tool steel through phase change. It could be a new method to improve the performance of HSS cutter.
文摘An experimental study is made on the resistance characteristic ofthe dense extrusion flow with pulverized coal and nitrogen as medium in thispaper. Through the analysis of gas compressibility , solids continuity and lam-mar flow of both gas and solids, a