Time-Frequency Bandwidth Product Estimation of Sinusoidal Non-Linear Chirp Keying Scheme

Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some parameter estimation issues over conventional modulation schemes. In this paper, a novel transform termed as Discrete Sinusoidal Frequency Modulation transform(DSFMT) is proposed. Then, the DSFMT of SNCK signal is deduced and classified into three types, based on which, the time-bandwidth product is estimated by the proposed algorithm. Simulation results show that the noise has a signifi cant impact on the localization of the peak value and the time-bandwidth product can be estimated by using local ratio values when.

Power supply for generating frequency-variable resonant magnetic perturbations on the J-TEXT tokamak

To further research the response of the tearing mode（TM） to dynamic resonant magnetic perturbation（DRMP） on the J-TEXT tokamak, a modified series resonant inverter power supply（MSRIPS） with a function of discrete variable frequency is designed for DRMP coils in this study. The MSRIPS is an AC–DC–AC converter, including a phase-controlled rectifier, an LC filter, an insulated gate bipolar transistor（IGBT） full bridge, a matching transformer, three resonant capacitors with different capacitance values, and three corresponding silicon controlled rectifier（SCR） switches. The function of discrete variable frequency is realized by switching over different resonant capacitors with corresponding SCR switches while matching the corresponding driving frequency of the IGBT full bridge. A detailed switching strategy of the SCR switch is put forward to obtain sinusoidal current waveform and realize current waveform smooth transition during frequency conversion. In addition, a resistor and thyristor bleeder is designed to protect the SCR switch from overvoltage. Manufacturing of the MSRIPS is completed, and the MSRIPS equipment can output current with an amplitude of 1.5 kA when its working frequency jumps among different frequencies. Moreover, the current waveform is sinusoidal and can smoothly transition during frequency conversion. Furthermore, the transition time when the current amplitude rises from zero to a steady state is less than 2 ms during frequency conversion. By using the MSRIPS, the expected discrete variable frequency DRMP is generated, and the phenomenon of the TM being locked to the discrete variable frequency DRMP is observed on the J-TEXT tokamak.

Decoder-based transient signal post-processing for ITU-T G.719 at low bit rate

Associated with ITU-T G.719,a post-processing method in frequency domain for enhancing the perceptual quality of the decoded transient audio is proposed only to the audio decoder with no side information from the encoder.The proposed post-filter is used to filter the frequency coefficients of the decoded transient frame and consists of a short-term post-filter and a spectral tilt compensation filter which are derived from linear predictive coding（LPC） predictor based on the discrete cosine transform（DCT） coefficients of the decoded transient frame.As a result,the post-filter in frequency domain shapes the temporal noise in time domain and controls the pre-echo noise effectively while enhancing the transient perception.Listening test results show that the preferring ratio of the post-processed transient signal is higher than that of the original decoded signal at a low bit rate of 32 kbit/s in G.719 and the post-processing module brings a complexity of 12.399 WMOPS to the decoder.