The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety ri...The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety risks and unnecessary costs. The pulsed current pattern of the accelerator power supply is different from other converter applications;therefore, this study proposed a lifetime estimation method for IGBT modules in pulsed power supplies for accelerator magnets. The proposed methodology was based on junction temperature calculations using square-wave loss discretization and thermal modeling.Comparison results showed that the junction temperature error between the simulation and IR measurements was less than 3%. An AC power cycling test under real pulsed power supply applications was performed via offline wearout monitoring of the tested power IGBT module. After combining the IGBT4 PC curve and fitting the test results,a simple corrected lifetime model was developed to quantitatively evaluate the lifetime of the IGBT module,which can be employed for the accelerator pulsed power supply in engineering. This method can be applied to other IGBT modules and pulsed power supplies.展开更多
By optimizing pump power ratio between 1st order backward pump and 2nd order forward pump on discrete Raman amplifier, we demonstrated over 2dB noise figure improvement without excessive non-linearity degradation.
The structural wave power flows in an elastic finite cylindrical shell with discrete axial stiffeners are studied when a simple harmonic force is applied on it. The equations of motion of the shell are derived by usin...The structural wave power flows in an elastic finite cylindrical shell with discrete axial stiffeners are studied when a simple harmonic force is applied on it. The equations of motion of the shell are derived by using Flügge equation and Hamilton variational principle, and the responses of the shell are obtained. By use of the basic definition of the power flow, the characteristics of axial propagation of the power flow supplied by input structure and carried by different shell internal forces of a forced shell are investigated. The effects of parameters, such as relative location of driving force and stringer, driving force type and structural damping on the vibrational power flows in the shell, are discussed. These provide some theoretical bases for vibration control and noise reduction of this kind of structure.展开更多
The CFD-DEM model was developed to simulate solid exchange behavior between two half beds in a bench-scale two-dimensional dual-leg fluidized bed (DL-FB). Power spectrum density (PSD) analysis was applied to obtai...The CFD-DEM model was developed to simulate solid exchange behavior between two half beds in a bench-scale two-dimensional dual-leg fluidized bed (DL-FB). Power spectrum density (PSD) analysis was applied to obtain the dominant frequency (F) of the simulated differential particle number (APLR) between the two half beds. Effects of fluidization velocity (u) and bed material inventory (H) on the solid exchange behavior were studied using the CFD-DEM model. Not only snapshots of the simulated particle flow patterns using the OpenGL code but also the dominant frequency of APLR was similar to the experimental results. The simulation results show that higher fluidization velocity assists the exchange of more particles between the two half beds, but the dispersion of clusters on the bed surface into single particles decreases the cluster exchange frequency. A greater bed material inventory results in more intense cluster exchange. The cluster exchange frequency decreases with an increase of the bed material inventory.展开更多
基金supported by the National Key Research and Development Program of China (No. 2019YFA0405402)。
文摘The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety risks and unnecessary costs. The pulsed current pattern of the accelerator power supply is different from other converter applications;therefore, this study proposed a lifetime estimation method for IGBT modules in pulsed power supplies for accelerator magnets. The proposed methodology was based on junction temperature calculations using square-wave loss discretization and thermal modeling.Comparison results showed that the junction temperature error between the simulation and IR measurements was less than 3%. An AC power cycling test under real pulsed power supply applications was performed via offline wearout monitoring of the tested power IGBT module. After combining the IGBT4 PC curve and fitting the test results,a simple corrected lifetime model was developed to quantitatively evaluate the lifetime of the IGBT module,which can be employed for the accelerator pulsed power supply in engineering. This method can be applied to other IGBT modules and pulsed power supplies.
文摘By optimizing pump power ratio between 1st order backward pump and 2nd order forward pump on discrete Raman amplifier, we demonstrated over 2dB noise figure improvement without excessive non-linearity degradation.
文摘The structural wave power flows in an elastic finite cylindrical shell with discrete axial stiffeners are studied when a simple harmonic force is applied on it. The equations of motion of the shell are derived by using Flügge equation and Hamilton variational principle, and the responses of the shell are obtained. By use of the basic definition of the power flow, the characteristics of axial propagation of the power flow supplied by input structure and carried by different shell internal forces of a forced shell are investigated. The effects of parameters, such as relative location of driving force and stringer, driving force type and structural damping on the vibrational power flows in the shell, are discussed. These provide some theoretical bases for vibration control and noise reduction of this kind of structure.
基金the support provided by the National Science and Technology Support Program of China(No.2012BAA02B00)
文摘The CFD-DEM model was developed to simulate solid exchange behavior between two half beds in a bench-scale two-dimensional dual-leg fluidized bed (DL-FB). Power spectrum density (PSD) analysis was applied to obtain the dominant frequency (F) of the simulated differential particle number (APLR) between the two half beds. Effects of fluidization velocity (u) and bed material inventory (H) on the solid exchange behavior were studied using the CFD-DEM model. Not only snapshots of the simulated particle flow patterns using the OpenGL code but also the dominant frequency of APLR was similar to the experimental results. The simulation results show that higher fluidization velocity assists the exchange of more particles between the two half beds, but the dispersion of clusters on the bed surface into single particles decreases the cluster exchange frequency. A greater bed material inventory results in more intense cluster exchange. The cluster exchange frequency decreases with an increase of the bed material inventory.