A prototype for on-site generation of chlorinated disinfectant for use in rural aqueducts

Sodium hypochlorite has significant potential as a sanitation solution in hard-to-reach areas.Few studies have investigated the optimal electrolysis parameters for its production with volumes greater than 1o L.This study evaluated sodium hypochlorite production through electrolysis in a 22-L prototype and identified the optimal operating parameters.Tests were performed using graphite electrodes with areas of 68.4 cm^(2) at the laboratory scale and 1865.0 cm^(2) at the prototype scale.A design for experiments with different operating times,chloride concentrations,and electric current intensities was developed.The optimal operating time,sodium chloride concentration,and current intensity at the laboratory scale were 120 min,150 g of chloride per liter,and 3 A,respectively,leading to the production of 5.02 g/L of the disinfectant with an energy efficiency of 12.21 mg of Cl_(2) per kilojoule.At the prototype scale,the maximum sodium hypochlorite concentration of 3.99 g of chloride per liter was achieved with an operating time of 120 min,a sodium chloride concentration of 100 g of chloride per liter,and a current intensity of 70 A,reaching an energy efficiency of 42.56 mg of Cl_(2) per kilojoule.In addition,this study evaluated the influences of the chloride concentration,current intensity,and operating time on the production of sodium hypochlorite at the two scales,and formulated the equations showing the trends of sodium hypochlorite production and energy efficiency in the electrochemical systems.The 22-L prototype model for production of this oxidizing substance is promising for disinfection of large volumes of water in areas that are difficult to access.

Progress in Analytical Methods of Halogenated Disinfection By-Products

Ensuring the health and safety of drinking water is crucial for both nations and their citizens.Since the 20th century,the disinfection of drinking water,effectively controlling pathogens in water sources,has become one of the significant advances in public health.However,the disinfectants used in the process,such as chlorine and chlorine dioxide,react with natural organic matter in the water to produce disinfection by-products(DBPs).Most of these DBPs contain chlorine,and if the source water contains bromine or iodine,brominated or iodinated DBPs,collectively referred to as Halogenated disinfection byproducts(X-DBPs),are formed.Numerous studies have found that X-DBPs pose potential risks to human health and the environment,leading to widespread concern.Mass spectrometry has become an important means of discovering new types of X-DBPs.This paper focuses on the study of methods for analyzing X-DBPs in drinking water using mass spectrometry.

Effects of Penicillium spp. and Trichoderma spp.on Pleurotus ostreatus Growth and Screening of Effective Disinfectants

[Objective] This study was conducted to investigate the effects of Penicillium spp. and Trichoderma spp. on the growth of Pleurotus ostreatus （oyster mushroom） and to screen effective disinfectants to control them and other pathogenic microbes. [Method] Six strains or species of Penicilliurn and Trichoderma were inocu- lated into PDA plates growing with P. ostreatus to observe the growth of their mycelia. And the inhibitory effects of hydrogen peroxide, bromogeramine bromide, 84 disinfectant, lysol, potassium permanganate, and 75% medical alcohol on Trichoderma pleuroticola, Trichoderma viride, Trichoderma harzianum, Penicillium citrinum, Penicillium thomii and Penicillium brevicompactum were detected. [Result] Confrontation test revealed that Penicillium spp. and Trichoderma spp. competed for nutrients with P. ostreatus mycelia, antagonized against the growth of P. ostreatus mycelia, invaded and twined around P. ostreatus mycelia, and also produced toxins poisoning P. ostreatus mycelia. The six disinfectants exhibited different inhibitory effects against different species of Penicillium and Trichoderma. Among them the in- hibitory effects of bromogeramine bromide against the six species of Penicillium and Trichoderma were significantly different. However, the inhibitory effects of 3% hydrogen peroxide, 84 disinfectant, 5% lysol, potassium permanganate and 75% medical alcohol were significantly different among Penicillium spp., but did not among Tri- choderma spp. [Conclusion] Bromogeramine bromide can be used to control the bacteria and fungi in mushroom production for it has significant inhibitory effects on the six species of both Penicillium and Trichoderma.

Is the Potential Interconnection between Antibiotic Susceptibility and Disinfectant Resistance a Threat to Food Safety?

The prevalence of antibiotic susceptibility and disinfectant resistance in bacterial pathogens causes a serious problem not only to food safety but also to public health, which directly or indirectly leads to treatment and disinfection failures. In this review, multidrug resistance, the mechanism of disinfectant resistance, the methods for detecting disinfectant resistance and the cross-resistance between an- tibiotics and disinfectants are summarized. More efforts should be devoted to explor- ing the professional guidance of using antibiotics and disinfectants, and to develop- ing the comprehensive detection with genetic and molecular methods is highly ex- pected.

Characterization of dissolved organic matter fractions and its relationship with the disinfection by-product formation

Dissolved organic matter （DOM） has been identified as precursor for disinfection by-products （DBPs） formation during chlorination. Recently, it has been demonstrated that the characteristics of DOM influence the DBPs formation mechanism. A study was, therefore, initiated to investigate the effects of DOM fractions on DBPs formation mechanism. In the chlorination process, organic acids are dominant precursors of total thihalomethanes （TTHM） because of the vc-o and unsaturated structures. Furthermore, the TTHM formation of organic acids was affected by pH more greatly. Based on the fluorescence spectroscopy analysis, DOM fractions contained several fluorescence substances. During chlorination, humic acid-like substances were found to exhibit high chlorine reactivity and hydrophobic organics decomposed to smaller molecules faster than hydrophilic organics even at lower chlorine dosages. Unlike hydrophobic fractions, hydrophilic organics showed no toxicity following chlorination, suggesting that the toxic structures in hydrophihc organics showed high chlorine reactivity during chlorination.

Simultaneous Control of Microorganisms and Disinfection By-products by Sequential Chlorination

Objective To introduce a new sequential chlorination disinfection process in which short-term free chlorine and chloramine are sequentially added. Methods Pilot tests of this sequential chlorination were carried out in a drinking water plant. Results The sequential chlorination disinfection process had the same or better efficiency on microbe （including virus） inactivation compared with the free chlorine disinfection process. There seemed to be some synergetic disinfection effect between free chlorine and monochloramine because they attacked different targets. The sequential chlorination disinfection process resulted in 35.7%-77.0% TTHM formation and 36.6%-54.8% THAA5 formation less than the free chlorination process. The poorer the water quality was, the more advantage the sequential chlorination disinfection had over the free chlorination. Conclusion This process takes advantages of free chlorine＇s quick inactivation of microorganisms and chloramine＇s low disinfection by-product （DBP） yield and long-term residual effect, allowing simultaneous control of microbes and DBPs in an effective and economic way.

Removal of disinfection by-products formation potential by biologically intensified process

The removal of disinfection by-products formation potential(DBPFP) in artificially intensified biological activated carbon(IBAC) process which is developed on the basis of traditional ozone granular activated carbon was evaluated. By IBAC removals of 31% and 68% for THMFP and HAAFP were obtained respectively. Under identical conditions, the removals of the same substances were 4% and 32% respectively only by the granular activated carbon(GAC) process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. A clear linear correlation(R 2=0.9562 and R 2=0.9007) between DOC HAAFP removal rate and Empty Bed Contact Time(EBCT) of IBAC process was observed, while that between THMFP removal rate and EBCT of GAC was R 2=0.9782. In addition certain linear correlations between THMFP, HAAFP and UV 254 (R 2=0.855 and R 2=0.7702) were found for the treated water. For IBAC process there are also more advantages such as long backwashing cycle time, low backwashing intensity and prolonging activated carbon lifetime and so on.

Preparation and Evaluation of Novel Solid Chlorine Dioxide-based Disinfectant Powder in Single-pack

Objective To prepare and evaluate novel chlorine dioxide-based disinfectant powder in single-pack that is more convenient for use and transportation. Methods Orthogonal experiment was performed to determine the recipe of the disinfectant powder. Stability test, suspension quantitative bactericidal test, simulation field triM, and animal toxicity test were carded out to observe its bactericidal and toxicological effects. Results The orthogonal experiment showed that the type of water solution had no effect on the disinfectant powder and the best ratio of sodium chlorite to solid acid was 1：3. Ten grams of the disinfectant powder was fully dissolved in 20 mL water for 2 min, and diluted to 500 mL in water. After 5-10 min, the concentration of chlorine dioxide （CIO2） solution was 266 mg/L to 276 mg/L. After stored at 54℃ for 14 d, the average concentration of CIO2 was decreased by 5.03%. Suspension quantitative bactericidal test showed that the average killing logarithm （KL） value for both Staphylococcus aureus and Escherichia coli in 100 mg/L CIO2 solution for 2 min was over 5.00. In simulation field triM, the average descending KL value for Escherichia coli in the solution containing 100 mg/L CIO2 for 5 min was over 3.00. The mouse acute LD50 in the solution 5 times exceeded 5000 mg/kg. The disinfectant powder was not toxic and irritative to rabbit skin and had no mutagenic effect on mouse marrow polychromatic erythrocytes （PCE）. Conclusion The stability and bactericidal efficacy of solid chlorine dioxide-based disinfectant powder in single-pack are good. The solution containing 100 mg/L CIO2 can kill vegetative forms of bacteria. The concentration of CIO2 on the disinfecting surface of objects is 100 mg/L. The disinfectant powder is not toxic and irritative.

Prescreening teratogenic potential of chlorinated drinking water disinfection by-products by using Hydra regeneration assay

Practicability of method for the Hydra regeneration assay on the prescreening teratogenic potential of chlorinated drinking water disinfection by products was studied through both the assays of toxicity of adult Hydra (T) and inhibition of the growth of regeneration Hydra (I) by using chloroform, dichloromethane and chloroacetic acid. The results showed that T 50 / I 50 ratios of chloroform and chloroacetic acid were 2 77 and 6 16 respectively, with teratogenic potential. T 50 / I 50 ratio of dichloromethane was 1.69, with weaker teratogenic potential. These experimental results indicated preliminarily that the Hydra regeneration assay has certainly applied value as a prescreening assay for developmental toxicity.

Enhanced Disinfection Effect of a Compound Disinfectant against Bovine Herpes Virus Type 1 at Low Temperature

A compound disinfectant, which consisted of didecyldimethylammonium chloride (DDAC), ortho-dichlorobenzene (1,2-dichlorobenzene, ODB), and chlorocresol (4-chloro-3-methylphenol, CC), and its component chemicals were individually tested for effectiveness against bovine herpes virus type 1 (BHV-1). DDAC, DDAC+ODB, DDAC+CC, and DDAC+ODB+CC showed effectiveness against BHV-1 at room temperature. However, ODB, CC, and ODB+CC showed no virucidal effects. The effects of all disinfectants tested were decreased at low temperature. DDAC showed disinfectant effects at a dilution of 1/800 and DDAC+ODB, DDAC+CC, and DDAC+ODB+CC at dilutions of 1/800 and 1/1600 at low temperature in the presence of 2% fetal bovine serum (FBS) but ODB, CC, and ODB+CC showed no virucidal effects. At low temperature and in the presence of 10% FBS, DDAC, DDAC+ODB, and DDAC+CC showed disinfectant effects at dilutions of 1/800, whereas ODB, CC, and ODB+CC showed no virucidal effects. DDAC+ ODB+CC was more effective (at 1/800 and 1/1600) than the other disinfectants under these conditions. In conclusion, a combination of three disinfectant components (DDAC+ODB+CC), enhanced the disinfectant effects at low temperature and in organic matter contamination.

Flashlight contamination and effectiveness of two disinfectants in a stomatology hospital

Aim: This study aims to assess the infection risks of flashlight contamination in a stomatology hospital and compare the disinfection effectiveness of alcohol (75%) and disinfecting wipes.Background: The flashlight is a basic non-critical medical device in oral and maxillofacial surgery wards. Wounds are mostly found in oral cavities;therefore, reusable flashlights may be a potential source of nosocomial infections (NIs). However, the microbial flora present in flashlights used in hospitals has not yet been explored. Methods: This study investigated the microbial contamination of 41 flashlights used in a stomatology hospital in Guangzhou in March 2016. Results: Results indicated that 75.6%(31/41) of the flashlights had microbial contamination. Gram-positive bacteria accounted for 72.7%(24/33)of the microbial groups contaminating the flashlights, and Gram-negative bacteria (21.2%, 7/33), and fungi (6.1%, 2/33) constituted the remaining contaminants. The predominantly isolated species was Staphyloccus (66.7%, 22/33), especially Staphylococcus aureus (24.2%, 8/33). Approximately 77.3%(17/22) of the types of bacteria detected in the hands were same as those in the corresponding flashlights. Both the bacterial overstandard and S. aureus detection rates of doctors' flashlights were higher than those of nurses' flashlights (16/17 vs. 14/23, 7/17 vs. 1/23, respectively) (P < 0.05). Moreover, both disinfectants performed excellently, and their eligibility rates were not significantly different (17/17 vs. 14/14) (P>0.05). Conclusion: Flashlights are potential causes of NIs. Disinfecting flashlights could be an effective and practical infection control method.

Removal characteristics of disinfection by-products formation potential by bioaugmentation activated carbon process

The high-active bacteria were screened from 8 dominant bacteria obtained from the natural water body,and then the bioaugmentation activated carbon was formed by hydraulic immobilization of the high-active bacteria. Plant-scale studies on removal characteristics of disinfection by-products formation potentials (DBPFP) by bioaugmentation activated carbon process were conducted for micro-polluted raw water treatment. The results show that the bioaugmentation activated carbon process has adopted better purification efficiency to THMFP and HAAFP than traditional biological activated carbon process,and that average removal efficiencies of THMFP and HAAFP can reach 35% and 39.7% during the test period,increasing by more than 10% compared with traditional biological activated carbon process. The removal efficiencies of THMFP and HAAFP are stable because of the biodegradation of the high-active bacteria and the adsorption of active carbon. The biodegradability of CHCl3 formation potential is better as compared with that of CHCl2Br and CHClBr2 formation potentials among THMFP,and high removal efficiency of CHCl3formation potential is obtained by bioaugmentation degradation of the high-active bacteria. The biodegradability of HAAFP is better in comparison with that of THMFP,and the chemical properties of HAAFP are propitious to adsorption of activated carbon. Thus,HAAFP is on predominance during the competitive removal process with THMFP.

Chlorine poisoning caused by improper mixing of household disinfectants during the COVID-19 pandemic:Case series

BACKGROUND Misuse of disinfectants during the coronavirus disease 2019 pandemic has led to several poisoning incidents.However,there are few clinical case reports on poisoning caused by improper mixing of household disinfectants.AIM To summarize the clinical characteristics and treatment effects of chlorine poisoning caused by improper mixing of hypochlorite bleach with acidic cleaning agents.METHODS We retrospectively analyzed baseline and clinical data,clinical symptoms,and treatment methods of seven patients with chlorine poisoning who were admitted to the National Army Poisoning Treatment Center.RESULTS Among the seven patients,the average poisoning time(exposure to admission)was 57 h(4-240 h).All patients were involved in cleaning bathrooms.Chest computed tomography scans revealed bilateral lung effusions or inflammatory changes in five patients.The partial pressure of oxygen decreased in six patients,and respiratory failure occurred in one.Five patients had different degrees of increase in white blood cell count.Humidified oxygen therapy,non-invasive mechanical ventilation,anti-inflammatory corticosteroids,antioxidants,and antibiotics were administered for treatment.The average length of hospital stay was 7 d(4-9 d).All seven patients recovered and were discharged.CONCLUSION Improper mixing of household disinfectants may cause damage to the respiratory system due to chlorine poisoning.Corticosteroids may improve lung exudation in severe cases,and symptomatic supportive treatment should be performed early.

A Moringa Oleifera Disinfectant-Sand Filter Integration： A Review of an Alternative Sustainable Technology for Household Water Treatment

This review provides an insight and up-to-date information on the application of Moringa oleifera seeds, the short falls of existing technologies as a coagulant and disinfectant in domestic water treatment. While the coagulant properties are well reported, the disinfectant properties are not well studied. Literatures on low cost alternative technologies such as the application of hiocoagulants and slow sand filters are extensively reported. However, there is limited work addressing the limitations of these technologies that have restricted its widespread use to solve the global soaring water crises. Slow sand filters have a very slow filtration rate that depends on the biofilm layer which takes about 17 days to form. Moringa oleifera treated water cannot last more than 48 hours without bacteria regrowth. Investigation of the best method of isolating coagulant component continues with differing opinions over the nature of its coagulant ingredient not resolved in ongoing literature. An attempt was made in this paper to highlight the advantages of a Moringa disinfectant sand filter hybrid system that can purify water. Microbiological advantages of this system in providing a 100% removal of pathogens, and engineering considerations such as water treatment within an hour residence time, faster flow rates, less clogging and backwashing could be some of the advantages ofa Moringa sand filter system. The need to focus on integrating Moringa and sand filter systems for more practical applications is recommended.

Testing the Efficiency of Acacia Bark (Galool-Asal) as Disinfectant for Polluted Waters

Acacia bark efficiency for disinfecting polluted water for the purpose of using it for drinking purposes was tested. Five polluted water samples were collected from different locations in Jordan, namely, King Abdullah Canal, an Agricultural pond in the Jordan Valley, Yajouz wells, Hazeir spring, and Wadi-Seer spring. Different volumes of the water samples were treated with 10 g of the shredded acacia bark (obtained from Somalia) for different retention times. The volumes used were 1 L, 2.5 L, and 5 L and the detention times were 2, 4, and 24 hours. The samples were tested for total coliform, E. coli, electrical conductivity, pH, total dissolved solids, turbidity and color before and after treatment with the acacia bark. Results revealed that the optimum conditions for disinfection were: 1 L polluted water treated with 10 g acacia bark for 24 hours. Log removals of about 2.5 for E. coli were obtained under these conditions. Higher removals could be achieved by using larger amounts of the acacia bark, but the chemical water quality regarding turbidity and color will not be suitable for drinking purposes and levels of tannic acids present in the acacia bark might reach toxic levels. Toxic levels will not be reached if 1 glass of water/kg body weight every 4 - 5 hours daily is consumed.

Effect of Disinfectants on Elastic Modulus, Flexural Strength and Color Stability of Denture Base Resins

Objective: Infection control protocols dictate the disinfection of dentures. There are no products available which are designed for the specific use of disinfecting dentures. The objective of this study was to investigate the impact of chemical disinfectants on elastic modulus, flexural strength and color stability of denture base resins. Methods: 256 specimens from four acrylic denture base resins were manufactured. Two cold-curing denture base resins: PalaXpress (Heraeus Kulzer, Hanau, Germany), Futura Gen (Schuetz Dental, Ro&szlig;bach, Germany) and two heat-curing denture base resins: Paladon 65 (Heraeus Kulzer, Hanau, Germany), FuturAcryl 2000 (Schuetz Dental, Ro&szlig;bach, Germany) were used. Three chemical disinfecting agents were tested: Impresept, D050 Instru-Gen, Stammopur DR. Specimens were stored in distilled water and in chemical disinfecting agents. They were divided randomly into groups. E-Modulus and flexural strength were measured using the three-point bending test. Color changes (ΔE) were determined spectrophotometrically. Results: The disinfection agents showed no significant influence on the E-modulus compared to distilled water (Acrylic vs. distilled water from (Futura Gen) 2688.80 ± 230.78 vs. 2766.60 ± 91.22 MPa to (PalaXpress) 3004.20 ± 26.40 vs. 2851.00 ± 95.23 MPa). Flexural strength after storage in distilled water and disinfection did not differ significantly (Acrylic vs. distilled water from (Paladon65) 27.28 ± 1.30 vs. 28.42 ± 0.84 N/mm2, (p > 0.05) to (PalaXpress) 30.88 ± 0.25 vs. 29.68 ± 0.79 N/mm2, p < 0.001). Disinfection caused a significant color change with Impresept of Paladon 65 (p ≤ 0.001), FuturaAcryl 2000 with Stammopur DR and D 050 Instru-Gen (p ≤ 0.001). Conclusions: The investigated disinfection agents did not influence elastic modulus and flexural strength of denture base resins negatively. ΔE-values were in a range of 1 to 2. Thus, the detected color changes may be marginal. Clinical relevance: Single use disinfections are feasible for acrylic dentures regarding to elastic modulus and flexural strength.

Studies of non-metallic organic disinfectants on inactivation of avian influenza viruses

Six different kinds of non-metallic or organic disinfectants were obtained in this research study including “Neutral Electrolyzed Water”, “M22” organic disinfectant solution, Superoxy Food Wash disinfectant, Hydrogen Peroxide, Clorox Germicidal Bleach and Clidox-S. The effectiveness of these disinfectants was studied against various subtypes of avian influenza virus (AIV). The virus-disinfectant mixtures were prepared in serial dilutions of each disinfectant with a constant virus titer and incubated at ambient temperature in different time intervals for virus inactivation. The virus inactivation results were determined by virus recovery in embryonating chicken eggs. Among the six different kinds of nonmetallic disinfectants obtained for this research project, Neutral Electrolyzed Water, “M22” solution, Clorox Germicidal Bleach and Clidox-S were effectively inactivated AIV with appropriate working dilutions and reaction times. Superoxy Food Wash disinfectant and Hydrogen Peroxide were found having limited effect on virus inactivation with extended exposure times of more than 2 hours. These research findings provide scientific data to poultry industry with guidelines to select and use non-metallic organic disinfectants for poultry flock sanitation and disinfection to effectively prevent and control of avian influenza outbreaks.

Disinfectant for Urinary Infection Caused by <i>Escherichia coli</i>by Using Natural Oils

According to the WHO analysis, antibacterial treatment which is preferred for treating peptic ulcers and oral health problems are considered as a major improvement in the treatment but are responsible for several health problems that include vomiting, diarrhea and the increase in the bacterial resistance is a major concern. So, there is an urgent need for a good therapeutic alternative which is effective. Usage of essential oils to treat different ailments is found to be extremely effective with no side effects. Thus, essential oils are gaining importance in treatments due to their antibacterial, antifungal, antiprotozoal properties. Essential oils are also used as aroma therapeutic agents. They are complex mixture of low molecular weight compounds that include terpenoids, phenylpropanoids, oxygenated derivatives (aldehydes, ketones, alcohols, esters) which greatly differ in composition in different essential oils are the major components present. The bioactive properties and their medical potential are widely used in pharmaceutical industries. In this study, we use these essential oils to prepare a disinfectant and analyze the antimicrobial properties using the agar diffusion method. Our major concern in this study is to decrease the growth of Escherichia coli which causes urinary infection, by using disinfectant prepared using a mixture of essential oils of particular concentration.

On-Site Assessment of a Cryogenic Disinfectant for the Alpine Environment and Outer Packaging of Frozen Items

Objective To study the effectiveness and feasibility of cryogenic disinfectants in different cold scenarios and analyze the key points of on-site cryogenic disinfection.Methods Qingdao and Suifenhe were selected as application sites for the manual or mechanical spraying of cryogenic disinfectants.The same amount of disinfectant(3,000 mg/L)was applied on cold chain food packaging,cold chain containers,transport vehicles,alpine environments,and article surfaces.The killing log value of the cryogenic disinfectant against the indicator microorganisms(Staphylococcus aureus and Escherichia coli)was used to evaluate the on-site disinfection effect.Results When using 3,000 mg/L with an action time of 10 min on the ground in alpine regions,the surface of frozen items,cold-chain containers,and cold chain food packaging in supermarkets,all external surfaces were successfully disinfected,with a pass rate of 100%.The disinfection pass rates for cold chain food packaging and cold chain transport vehicles of centralized supervised warehouses and food processing enterprises were 12.5%(15/120),81.67%(49/60),and 93.33%(14/15),respectively;yet,the surfaces were not fully sprayed.Conclusion Cryogenic disinfectants are effective in disinfecting alpine environments and the outer packaging of frozen items.The application of cryogenic disinfectants should be regulated to ensure that they cover all surfaces of the disinfected object,thus ensuring effective cryogenic disinfection.

Health Risk Assessment of Employees Exposed to Chlorination By-products of Recreational Water in Large Amusement Parks in Shanghai

Objective Chlorination is often used to disinfect recreational water in large amusement parks;however,the health hazards of chlorination disinfection by-products(DBPs)to occupational populations are unknown.This study aimed to assess the exposure status of chlorinated DBPs in recreational water and the health risks to employees of large amusement parks.Methods Exposure parameters of employees of three large amusement parks in Shanghai were investigated using a questionnaire.Seven typical chlorinated DBPs in recreational water and spray samples were quantified by gas chromatography,and the health risks to amusement park employees exposed to chlorinated DBPs were evaluated according to the WHO's risk assessment framework.Results Trichloroacetic acid,dibromochloromethane,bromodichloromethane,and dichloroacetic acid were detected predominantly in recreational water.The carcinogenic and non-carcinogenic risks of the five DBPs did not exceed the risk thresholds.In addition,the carcinogenic and non-carcinogenic risks of mixed exposure to DBPs were within the acceptable risk limits.Conclusion Typical DBPs were widely detected in recreational water collected from three large amusement parks in Shanghai;however,the health risks of DBPs and their mixtures were within acceptable limits.