One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes

In this study,a new tannic acid adsorbent(ethylene glycol diglycidyl ether crosslinked tannic acid,TAEGDE)for adsorptive removal of dyes from water was prepared using EGDE as a cross-linking agent.The resultant TA-EGDE was in particulate form with rough surface morphology and a diameter ranging from 10 to 30μm.The adsorption performance of the TA-EGDE was evaluated in a flow-through mode using water samples contaminated with methylene blue(MB)and two-component mixed dyes,respectively.The TA-EGDE provided adsorption capacity up to 721.8 mg·g^(-1)at 65°C for MB.It showed a high removal efficiency(99%)of MB(50 mg·L^(-1))from the water sample and could recovery 90%of the adsorbed MB by eluting with acidic ethanol aqueous solution.The excellent adsorption of MB and neutral red on the TA-EGDE may be the result of the synergy of electrostatic interaction andπ-πinteraction.Furthermore,the TA-EGDE could separate dyes from water samples contaminated with twocomponent mixed dyes with a separation coefficient ranging from 1.8 to 36.5.The anionic TA-EGDE would be an effective adsorbent to remove and recycle dyes from the contaminated water.

Controlled-release Properties of Microencapsulated Disperse Dyes

Some disperse dyes were microencapsulated by means of in- situ polymerization. These microencapsulated disperse dyes was extracted respectively by ethanol under certain conditions. The controlled-release properties of disperse dyes through the shell of microcapsules were measured by spectrophotometer. According to the results, it was drawn that the type of disperse dyes, the auxiliaries contained in disperse dyes, the quantity of system controlling medium used and the core/shell ratio of microcapsules play important roles in controlling the release properties of microcapsules. The different controlled- release properties of microcapsules, which were prepared under given conditions, however, would in turn influence the performance of microcapsules in multiple-transfer printing.

Synthesis of 6-chloro and 6-fluoro-4-hydroxyl-2-quinolone and their azo disperse dyes

In this study,6-chloro-4-hydroxy-2-quinolone and 6-flouro-4-hydroxy-2-quinolone were synthesized from corresponding dianilides.These compounds were coupled with some diazotized aromatic amines to give the corresponding azo disperse dyes.The structures of the quinolone derivatives and new azo dyes were confirmed by UV-vis,FT-IR,;H NMR and elemental analysis.

One-bath Dyeing of Polyester/Wool Blend with Disperse Dyes

The role of auxiliary LAB as vehicle in dyeing polyester/wool blends with disperse dyes is described. Dye exhaustion and bonding on polyester/wool samples are studied under different experimental conditions - the LAB amount, the temperature and pH value- to achieve optimum conditions. The results are compared with those obtained with and without conventional dyeing auxiliary products. Although dye exhaustion is higher in the presence of commercial carriers, the dye bonded increases markedly in the presence of auxiliary LAB in both fibers. The role played by auxiliary LAB in polyester/wool blend dyeing can provide a new method for this process.

Synthesis of Some New Diazo Disperse Dyes and Their Application on Dyeing of Polyester

The synthesis of some new diazo disperse dyes containing a pyrazol-5-one was described. The structures of the new products have been deduced from elemental analysis and spectral dada such as UV-Vis absorption, IR, ^1H NMR, and MS spectroscopy. These dyestuffs gave satisfactory results when applied as disperse dyes to polyester fabric. The dyeing properties such as light fasmess, washing fastness and exhaustion studies have been investigated.

New Technology of Disperse Dyes Solubilized by Auxiliaries Dyeing to Wool

The new technology of disperse dyes solubilized by auxil-iary dycing to wool is put forward creatively.On the ef-fect of agent HM made by ourselves,the wool can bedyed by disperse dyes.The effects of temperature,pHvalue,liquor ratio,electrolyte and concentration ofHM,on the percentage of exhaustion,dyeing rate andpermeability,levelness are researched.This technologyhas many advantages,e.g.superior levelness and wet-fastness,saving dyes,simple process and bright shadeetc.,this project has utmost values of theory researchand practice application.

AN EXAMINATION OF THE INFLUENCE OF STABILIZERS ON THE PHOTOCHEMICAL STABILITY OF DISPERSE DYES

There is a powerful market-need for superfast disperse dyes in special use, e.g. for automotivefabrics. The photochemical fading reactions of dyes are often very complicated, and no singlphotodegradation pathway can be involved for all kinds of dyes. To enhance the photostability of the commonly used disperse dyes, a series of tests on the ef-fect of variable stabilizers on the photodegradation rate of nine representative disperse dyes werecarried out both in ethyl acetate solution and on cellulose acetate film. A moderate light sourceemitting above 300 nm was adopted in this study to simulate the photofading under practical appli-cations. The results show that, in solution, 2,2,6,6-tetramethyl-piperidine is the most effectivegeneral stabilizer for all the tested dyes, but on cellulose film, nickel diethyl-dithiocarbamateshows the greatest general protecting effect, and a synergistic effect is observed for special combina-tions of stabilizers.

Mathematical Index for Evaluating Disperse Dyes Levelness of Superfine Polyester Fabric

The dyeing deference between the superfine and the con-ventional polyester fabric is discussed. The major threefactors affecting the level dyeing property of superfinepolyester-initial adsorption rate, desorption rate andinterface migration rate of dyestuffs at 70℃ are studied.The levelness improves considerably with decreased ini-tial adsorption rate, increased desorption rate and inter-face migration rate. And then a mathematical indexbased on them is established. The evaluation to dispersedyes resulting from it corresponds with their perfor-mance during industrial process. As new definitions, ini-tial adsorption rate and desorption rate of dyestuffs arefirstly introduced.

Syntheses and Properties Studies on New Dispersed Dyes With Intermediate BIT

The target production were obtained by coupled reaction of 3-amino-5-nitro-2, 1- benzoisothiazole,as a diazo component,with some derivatives of anilline or some derivatives of naphthylamine sulfonic acid in proper condition. Their colors are from red to violet. They have excellent tight property. The chemical and physical test of production verified that they were some unique properties.

New Disperse Dyes for Polyester Microfibres

A series of disperse dyes bearing ether groups have been synthesized. The visible absorption spectra of them were studied, their fastness on polyester microfibres were investigated.

Preparation and Application of Microencapsulated Disperse Dyes

Microcapsules containing disperse dyes were prepared by means of in-situ polymerization. Polyester fabrics were multiple-transfer printed and color-mix printed using those microencapsulated dyes under different process conditions. By color measurement instrument, it can be seen that the times of multiple-transfer printing are up to ten while under appropriate conditions, especially when the transfer printing time is 50 seconds and the transfer printing temperature is 180°C. On the other hand, the K/S value of each transfer printing can keep almost constant. Meanwhile, the visual effect of color- mix printing with microencapsulated disperse dyes is special in the varicolored exhibiting if compared with conventional disperse dyes.

Kinetics of Hydrolysis of Cationic Reactive Disperse Dyes Containing Quaternary Group

The kinetics of hydrolysis of cationic reactive disperse dyes containing quaternary group and chemical shift（13CNMR） of the adjacent carbon atoms with pyridine-acetylamino were discussed. The results show pyridine-acetylamino reactive group had higher reactivity than chloroacetylamino and chemical shift（13 CNMR） of the adjacent carbon atoms with pyridine-acetylamino moved 18.77 ppm.

Decolorization of Disperse Dyes Using Immobilized Laccase Enzyme on Nano Zinc Ferrite from Single and Binary Systems

In this paper, immobilized laccase enzyme on nano zinc ferrite was used in order to decolorize disperse dyes from single and binary systems. In this case, disperse dyes such as Disperse red 60 (DR60), Disperse blue 56 (DB56) and Disperse yellow 54 (DY54) were selected as model dyes. Several parameters such as enzyme concentration, pH and dye concentration and their effect on decolorization of dyes from single and binary systems were studied. According to the experimental results, the optimized immobilized laccase enzyme concentration, reaction time and pH for decolorization of DR60, DB56 and DY54 from single and binary systems were 500 mg/L (for DR60 and DY54) and 400 mg/L (for DB56), 20 min and 3, respectively. Moreover, Dye decolorization kinetics followed Michaelis-Menten Model. Finally, the results showed that enzymatic process using immobilized laccase enzyme on nano zinc ferrite was effective method to decolorize disperse dyes from single and binary systems.

WATER SOLUBLE DISPERSE DYES CONTAINING CARBOXY-METHYL-SULFONYL GROUP

Water soluble disperse dyes of either monoazo or anthraquinone types containing the carboxymethylsulfonylgroup（-SO2CH2COOH）were synthesized.Ammonium salts of this type of dyes are more soluble thanother salts.These dyes are suitable for pad dyeing or printing on polyester fiber and polyester/cottonblends in either weak acid,neutral or weak alkali medium without a dispersing agent.The formation of-SO2CH3 group from -SO2CH2COOH group after fixing on the fiber was proved.

Synthesis of Some Azo Disperse Dyes from 1-Substituted 2-Hydroxy-6-pyridone Derivatives and Their Colour Assessment on Polyester Fabric

The synthesis of a series of 3-(p-substituted phenylazo)-6-pyridone dyes which is suitable for the dyeing of polyester fabrics, is described. Visible absorption spectra of the dyes were examined in various solvents and the compounds in solution exhibited hydrazone-common anion equilibrium. The electronic absorption spectra cover a λmax range of 404 - 464 nm in DMF at uniformly high absorption intensity between 5.33 × 104 - 8.55 × 104 lmol–1cm–1 and gave bright intense hues of yellow to orange on polyester fabrics. The colour parameters of the dyed fabrics were measured and the dyes have excellent exhaustion between 72% - 79% for polyester fabrics, more intense and of very good fastness properties on polyester fabrics. The remarkable degree of levelness and brightness after washing is indicative of good penetration and excellent affinity of these dyes for the polyester fabric.

The Relationship between Polarographic Reduction Potentials and Discharge Properties of Disperse Dyes

The half-wave potentials of disperse dyes with different structures are measured, the relationship between half-wave potentials and their discharge properties is discussed, then their effect factors are studied, such as the chemical structure types and substituents of disperse dyes and technological parameters. The results indicate that the half-wave potentials of disperse dyes when reduced could be used to characterize their reducing and discharge properties.

Chitosan and chemically modified chitosan beads for acid dyes sorption

The capabilities of chitosan and chitosan-EGDE （ethylene glycol diglycidyl ether） beads for removing Acid Red 37 （AR 37） and Acid Blue 25 （AB 25） from aqueous solution were examined. Chitosan beads were cross-linked with EGDE to enhance its chemical resistance and mechanical strength. Experiments were performed as a function ofpH, agitation period and concentration of AR 37 and AB 25. It was shown that the adsorption capacities of chitosan for both acid dyes were comparatively higher than those of chitosan- EGDE. This is mainly because cross-linking using EGDE reduces the major adsorption sites -NH3＋ on chitosan. Langmuir isotherm model showed the best conformity compared to Freundlich and BET. The kinetic experimental data agreed very well to the pseudo second-order kinetic model. The desorption study revealed that after three cycles of adsorption and desorption by NaOH and HCl, both adsorbents retained their promising adsorption abilities. FT-IR analysis proved that the adsorption of acid dyes onto chitosan-based adsorbents was a physical adsorption. Results also showed that chitosan and chitosan-EGDE beads were favourable adsorbers and could be employed as low-cost alternatives for the removal of acid dyes in wastewater treatment.

Adsorption characteristics of humic acid-immobilized amine modified polyacrylamide/bentonite composite for cationic dyes in aqueous solutions

Humic acid-immobilized amine modified polyacrylamide/bentonite composite （HA-Am-PAA-B） was prepared and used as an adsorbent for the adsorption of cationic dyes （Malachite Green （MG）, Methylene Blue （MB） and Crystal Violet （CV）） from aqueous solutions. The polyacrylamide/bentonite composite （PAA-B） was prepared by intercalative polymerization of acrylamide with Nabentonite in the presence of N,N＇-methylenebisacrylamide as a crosslinking agent and hexamethylenediammine as propagater. PAA-B was subsequently treated with ethylenediammine to increase its loading capacity for HA. The surface characterizations of the adsorbent were investigated. The adsorbent behaved like a cation exchanger and more than 99.0% removal of dyes was detected at pH range 6.0-8.0. The capacity of HA-Am-PAA-B was found to decrease in the following order： MG〉MB〉CV. The kinetic and isotherm data were interpreted by pseudo-second order rate equation and Freundlich isotherm model, respectively. Experiments were carried out using binary solute systems to assess the competitive adsorption phenomenon. The experimental isotherm data for each binary solute combination of MG, MB and CV were analyzed using Sheindrof-Rebhun-Sheintuch （SRS） （multicomponent Freundlich type） equation.

Poly (Acrylamide-co-Acrylic Acid) Hydrogel Induced by Glow-Discharge Electrolysis Plasma and Its Adsorption Properties for Cationic Dyes

In this paper, poly （acrylamide-co-acrylic acid） （P（AM-co-AA）） hydrogel was pre- pared in an aqueous solution by using glow-discharge electrolysis plasma （GDEP） induced copoly- merization of acrylamide （AM） and acrylic acid （AA）, in which N,N＇-methylenebisacrylamide （MBA） was used as a crosslinker. A mechanism for the synthesis of P（AM-co-AA） hydrogel was proposed. To optimize the synthesis condition, the following parameters were examined in detail： the discharge voltage, discharge time, the content of the crosslinker, and the mass ratio of AM to AA. The results showed that the optimum pH range for cationic dyes removal was found to be 5.0-10.0. The P（AM-co-AA） hydrogel exhibits a very high adsorption potential and the ex- perimental adsorption capacities for Crystal violet （CV） and Methylene blue （MB） were 2974.3 mg/g and 2303.6 mg/g, respectively. The adsorption process follows a pseudo-second-order kinetic model. In addition, the adsorption mechanism of P（AM-co-AA） hydrogel for cationic dyes was also discussed.

Synthesis and Characterization of a Novel Aqueous Dispersion Poly[urethane-(disperse blue 14)-urethane] Dye

A novel polymeric dye of aqueous dispersion poly[urethane-(disperse blue 14)-urethane] was synthesized based on poly(propylene glycol) (PPG), 2, 4-tolylene diisocyanate (TDI), klimethylol propionic acid (DMPA), disperse blue 14 and triethylamine (TEA) depending on a modified acetone process. Fourier transform infrared spectroscopy (FTIR) was used to identify Lhe structure of the polymeric dye, indicating an obvious carbonyl stretching absorption in disperse blue 14. The polymer was also characterized by the analysis of DSC, TGA, WAXD and UV-Vis spectroscopy.