Optical chaos has attracted widespread attention owing to its complex dynamic behaviors.However,the time delay signature(TDS)caused by the external cavity mode reduces the complexity of optical chaos.We propose and nu...Optical chaos has attracted widespread attention owing to its complex dynamic behaviors.However,the time delay signature(TDS)caused by the external cavity mode reduces the complexity of optical chaos.We propose and numerically demonstrate the critical dispersion of chirped fiber Bragg grating(CFBG)for eliminating the TDS of laser chaos in this work.The critical dispersion,as a function of relaxation frequency and bandwidth of the optical spectrum,is found through extensive dynamics simulations.It is shown that the TDS can be eliminated when the dispersion of CFBG is above this critical dispersion.In addition,the influence of dispersive feedback light and output light from a laser is investigated.These results provide important quantitative guidance for designing chaotic semiconductor lasers without TDS.展开更多
Based on the general theory of linear Chirped Bragg fiber grating, this paper discusses some parameters including different chirped values and quasi gauss coupling function relating with the reflectivity coefficient d...Based on the general theory of linear Chirped Bragg fiber grating, this paper discusses some parameters including different chirped values and quasi gauss coupling function relating with the reflectivity coefficient dispersion compensation.The result shows that selecting larger chirped value and appropriate qusi guass coupling function can improve the dispersion compensation while ensuring high reflectivity. The concept of "figure of merit" in the microwave field is introduced to quantize the equalizing power of the dispersion compensator.展开更多
A chirped fibre Bragg grating according to ITU-T suggested L-band (2nd channel λ1 = 1570.83 nm; 80th channel λ2 = 1603.57 nm) with more than 1800 ps/nm single channel dispersion compensation is presented in this p...A chirped fibre Bragg grating according to ITU-T suggested L-band (2nd channel λ1 = 1570.83 nm; 80th channel λ2 = 1603.57 nm) with more than 1800 ps/nm single channel dispersion compensation is presented in this paper, of which the cladding mode loss, the delay curve ripple and the power fluctuation of the reflected spectrum are less than 0.5 dB, 50 ps and 0.25 dB, respectively. With this new FBG as dispersion compensation device, a 2 × 10 Gb/s wavelength division multiplexing (WDM) L-band transmission of 600 km based on conventional single mode fibre (G.652 fibre) is performed without forward error correction. The bit error rate (BER) is less than 10-12 and the power penalties of the 2nd and 80th channel of L-band are 1.8 dB and 2.0 dB, respectively.展开更多
We propose a novel lumped time-delay compensation scheme for all-optical analog-to-digital conversion based on soliton self-frequency shift and optical interconnection techniques. A linearly chirped fiber Bragg gratin...We propose a novel lumped time-delay compensation scheme for all-optical analog-to-digital conversion based on soliton self-frequency shift and optical interconnection techniques. A linearly chirped fiber Bragg grating is optimally designed and used to compensate for the entire time-delays of the quantized pulses precisely. Simulation results show that the compensated coding pulses are well synchronized with a time difference less than 3.3 ps, which can support a maximum sampling rate of 151.52 GSa/s. The proposed scheme can efficiently reduce the structure complexity and cost of all-optical analog-to-digital conversion compared to the previous schemes with multiple optical time-delay lines.展开更多
The combination of Radio Frequency and Optical Fiber has resulted high capacity transmission at lower costs components and makes Radio over Fiber as a current trend of large broadband communication. In Fiber optics fi...The combination of Radio Frequency and Optical Fiber has resulted high capacity transmission at lower costs components and makes Radio over Fiber as a current trend of large broadband communication. In Fiber optics field, the use of Fiber Bragg Grating (FBG) was been proposed in recent research with different purpose of uses. However, the compensation of dispersion method of Fiber Bragg Grating (FBG) can boost significantly the system performance. This paper investigates the performance capacity improvement of adaptive Radio over Fiber system. The system design was performed using OptiSystem 7.0 software, which 10 Gb/s Non Return to Zero (NRZ) signal was launched into 50 Km Universal Mode Fiber and Fiber Bragg Grating was used as a compensator of dispersion before frequency up conversion. Therefore, the system performances were investigated by comparing the Bit Error Rate (BER) and Q-factors of Positive Intrinsic Negative (PIN) and Ultrafast Avalanche Photodiode (APD) as optical receivers. The Eye diagram analyzer showed acceptable improvement due to use of Fiber Bragg Grating as a compensator of dispersion.展开更多
A brief historical narrative of the study of grating solitons in fiber Bragg grating is presented from the late 1970’s up to now. The formation of photogeneration gratings in optical fiber by sustained exposure of th...A brief historical narrative of the study of grating solitons in fiber Bragg grating is presented from the late 1970’s up to now. The formation of photogeneration gratings in optical fiber by sustained exposure of the core to the interference pattern produced by oppositely propagating modes of argon-ion laser radiation was first reported in 1978. One important nonlinear application of fiber Bragg grating is grating solitons, including gap soliton and Bragg soliton. This paper summarily introduces the numerous theoretical and experimental results on this field, each indicating the potential these solitons have in all-optical switching, pulse compression, limiting, and logic operations, and especially important for the optical communication systems.展开更多
Suppression of stimulated Raman scattering(SRS)by means of chirped and tilted fiber Bragg gratings(CTFBGs)has become a key topic.However,research on high-power systems is still lacking due to two problems.Firstly,afte...Suppression of stimulated Raman scattering(SRS)by means of chirped and tilted fiber Bragg gratings(CTFBGs)has become a key topic.However,research on high-power systems is still lacking due to two problems.Firstly,after the inscription,there are a large number of hydroxyl compounds and hydrogen molecules in CTFBGs that cause significant heating due to their strong infrared absorption.Secondly,CTFBGs can couple Stokes light from the core to the cladding and the coating,which causes serious heating in the coating of the CTFBG.Aimed at overcoming these bottlenecks,a process that combines constant-low-temperature and variable-high-temperature annealing is used to reduce the thermal slope of the CTFBG.Also,a segmented-corrosion cladding power stripping technology is used on the CTFBG to remove the Stokes light which is coupled to the cladding,which solves the problem of overheating in the coating of the CTFBG.Thereby,a CTFBG with both a kilowatt-level power-carrying load and the ability to suppress SRS in a fiber laser has been developed.Further,we establish a kW-level CW oscillator to test the CTFBG.Experimental results demonstrate that the power-carrying load of the CTFBG is close to 1 kW,the thermal slope is lower than 0.015 ℃/W,and the SRS suppression ratio is nearly 23 dB.展开更多
At first, we systematically sum up and deduce the figure of merit of the compensator using linearly chirped fiber gratings. Secondly, we solve the Reccatti differential equation by the Runge Kutta method and calcul...At first, we systematically sum up and deduce the figure of merit of the compensator using linearly chirped fiber gratings. Secondly, we solve the Reccatti differential equation by the Runge Kutta method and calculate the reflectivity and dispersion of the linearly chirped fiber gratings to obtain the figure of merit numericallu.On the other hand, we also discuss the figure of merit under the circumstances of three kinds of coupling coefficients and compare them Finally, we present one kind of perfect design of the compensator using the Gauss coupling function, and simply discuss the method to realize the Gauss coupling function in the fabrication of linearly chirped fiber gratings in this paper.展开更多
A tunable polarization mode dispersion (PMD) compensator based on strain-ckirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped...A tunable polarization mode dispersion (PMD) compensator based on strain-ckirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped phase mask, fast tuning response time, continuously adjustable, all-fiber based, compact, and cheap.展开更多
Many methods have been suggested to reduce dispersion in optical fiber communication. Among these methods, chirped fiber grating (CFG) is a promising scheme. This paper describes a linearly chirped fiber grating with...Many methods have been suggested to reduce dispersion in optical fiber communication. Among these methods, chirped fiber grating (CFG) is a promising scheme. This paper describes a linearly chirped fiber grating with 95% reflectivity and 0.3 nm bandwidth written using a double exposure method with a uniform phase mask. The CFG resonant wavelength is 1554.5 nm and dispersion is 1700 ps/nm. Dispersion compensation in a 10-Gb/s optical transmission system has been demonstrated using this chirped fiber grating. The power penalty induced by the dispersion compensation after 180-km transmission is 1 dB. This is the first report describing dispersion compensation of 180 km at 10-Gb/s optical transmission now-return to zero (NRZ) system in China.展开更多
In the high rate optical communication system, the loss and dispersion are important factors which affect the distance and volume of optical communication seriously. With successful researching and applications of ED...In the high rate optical communication system, the loss and dispersion are important factors which affect the distance and volume of optical communication seriously. With successful researching and applications of EDFA in the system, the loss has not been the most important factor affecting the quality of communication, but the dispersion is now still an important factor which will cause the optical pulse broad. Now the best way to compensate the dispersion of optical communication is using the linearly chirped fiber gratings. In this paper, the couple mode equation of chirped fiber grating to compensate the dispersion is offered and discussed, meanwhile, the problem of the transmitting and reflecting rate is a sitting function. The dispersive coefficient and coupled coefficient of compensator using chirped fiber gratings are also further studied.展开更多
-We describe a simple method to generate wavelength-tunable pulses by using a semiconductor optical amplifier (SOA) as an intensity modulator and a gain medium. Wavelength tunable pulses at a repetition rate of 4.8 GH...-We describe a simple method to generate wavelength-tunable pulses by using a semiconductor optical amplifier (SOA) as an intensity modulator and a gain medium. Wavelength tunable pulses at a repetition rate of 4.8 GHz have been generated.展开更多
We demonstrate an adjustable pure dispersion slope compensating-module based on strain-chirped fiber Bragg gratings. The center wavelength of the module is preserved while the pure dispersion slope is tuned.
基金the National Natural Science Foundation of China(Grant No.62105190)the Natural Science Foundation of Shanxi Province of China(Grant No.20210302124268)+1 种基金the Scientific and Technological Innovation Programs of Higher Education Institutions of Shanxi Province of China(Grant No.2021L285)the Youth Researchof Shanxi University of Finance and Economics(Grant No.QN-202015)。
文摘Optical chaos has attracted widespread attention owing to its complex dynamic behaviors.However,the time delay signature(TDS)caused by the external cavity mode reduces the complexity of optical chaos.We propose and numerically demonstrate the critical dispersion of chirped fiber Bragg grating(CFBG)for eliminating the TDS of laser chaos in this work.The critical dispersion,as a function of relaxation frequency and bandwidth of the optical spectrum,is found through extensive dynamics simulations.It is shown that the TDS can be eliminated when the dispersion of CFBG is above this critical dispersion.In addition,the influence of dispersive feedback light and output light from a laser is investigated.These results provide important quantitative guidance for designing chaotic semiconductor lasers without TDS.
文摘Based on the general theory of linear Chirped Bragg fiber grating, this paper discusses some parameters including different chirped values and quasi gauss coupling function relating with the reflectivity coefficient dispersion compensation.The result shows that selecting larger chirped value and appropriate qusi guass coupling function can improve the dispersion compensation while ensuring high reflectivity. The concept of "figure of merit" in the microwave field is introduced to quantize the equalizing power of the dispersion compensator.
文摘A chirped fibre Bragg grating according to ITU-T suggested L-band (2nd channel λ1 = 1570.83 nm; 80th channel λ2 = 1603.57 nm) with more than 1800 ps/nm single channel dispersion compensation is presented in this paper, of which the cladding mode loss, the delay curve ripple and the power fluctuation of the reflected spectrum are less than 0.5 dB, 50 ps and 0.25 dB, respectively. With this new FBG as dispersion compensation device, a 2 × 10 Gb/s wavelength division multiplexing (WDM) L-band transmission of 600 km based on conventional single mode fibre (G.652 fibre) is performed without forward error correction. The bit error rate (BER) is less than 10-12 and the power penalties of the 2nd and 80th channel of L-band are 1.8 dB and 2.0 dB, respectively.
基金Project supported by the National Basic Research Program,China(Grant Nos.2010CB327605 and 2010CB328300)the National High-Technology Research and Development Program of China(Grant No.2013AA031501)+7 种基金the National Natural Science Foundation of China(Grant No.61307109)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20120005120021)the Fundamental Research Funds for the Central Universities,China(Grant No.2013RC1202)the Program for New Century Excellent Talents in University,China(Grant No.NECT-11-0596)the Beijing Nova Program,China(Grant No.2011066)the Fund of State Key Laboratory of Information Photonics and Optical Communications(Beijing University of Posts and Telecommunications) Chinathe China Postdoctoral Science Foundation(Grant No.2012M511826)the Postdoctoral Science Foundation of Guangdong Province,China(Grant No.244331)
文摘We propose a novel lumped time-delay compensation scheme for all-optical analog-to-digital conversion based on soliton self-frequency shift and optical interconnection techniques. A linearly chirped fiber Bragg grating is optimally designed and used to compensate for the entire time-delays of the quantized pulses precisely. Simulation results show that the compensated coding pulses are well synchronized with a time difference less than 3.3 ps, which can support a maximum sampling rate of 151.52 GSa/s. The proposed scheme can efficiently reduce the structure complexity and cost of all-optical analog-to-digital conversion compared to the previous schemes with multiple optical time-delay lines.
文摘The combination of Radio Frequency and Optical Fiber has resulted high capacity transmission at lower costs components and makes Radio over Fiber as a current trend of large broadband communication. In Fiber optics field, the use of Fiber Bragg Grating (FBG) was been proposed in recent research with different purpose of uses. However, the compensation of dispersion method of Fiber Bragg Grating (FBG) can boost significantly the system performance. This paper investigates the performance capacity improvement of adaptive Radio over Fiber system. The system design was performed using OptiSystem 7.0 software, which 10 Gb/s Non Return to Zero (NRZ) signal was launched into 50 Km Universal Mode Fiber and Fiber Bragg Grating was used as a compensator of dispersion before frequency up conversion. Therefore, the system performances were investigated by comparing the Bit Error Rate (BER) and Q-factors of Positive Intrinsic Negative (PIN) and Ultrafast Avalanche Photodiode (APD) as optical receivers. The Eye diagram analyzer showed acceptable improvement due to use of Fiber Bragg Grating as a compensator of dispersion.
文摘A brief historical narrative of the study of grating solitons in fiber Bragg grating is presented from the late 1970’s up to now. The formation of photogeneration gratings in optical fiber by sustained exposure of the core to the interference pattern produced by oppositely propagating modes of argon-ion laser radiation was first reported in 1978. One important nonlinear application of fiber Bragg grating is grating solitons, including gap soliton and Bragg soliton. This paper summarily introduces the numerous theoretical and experimental results on this field, each indicating the potential these solitons have in all-optical switching, pulse compression, limiting, and logic operations, and especially important for the optical communication systems.
基金supported by the National Key Research and Development Program of China(No.2017YFB1104400)
文摘Suppression of stimulated Raman scattering(SRS)by means of chirped and tilted fiber Bragg gratings(CTFBGs)has become a key topic.However,research on high-power systems is still lacking due to two problems.Firstly,after the inscription,there are a large number of hydroxyl compounds and hydrogen molecules in CTFBGs that cause significant heating due to their strong infrared absorption.Secondly,CTFBGs can couple Stokes light from the core to the cladding and the coating,which causes serious heating in the coating of the CTFBG.Aimed at overcoming these bottlenecks,a process that combines constant-low-temperature and variable-high-temperature annealing is used to reduce the thermal slope of the CTFBG.Also,a segmented-corrosion cladding power stripping technology is used on the CTFBG to remove the Stokes light which is coupled to the cladding,which solves the problem of overheating in the coating of the CTFBG.Thereby,a CTFBG with both a kilowatt-level power-carrying load and the ability to suppress SRS in a fiber laser has been developed.Further,we establish a kW-level CW oscillator to test the CTFBG.Experimental results demonstrate that the power-carrying load of the CTFBG is close to 1 kW,the thermal slope is lower than 0.015 ℃/W,and the SRS suppression ratio is nearly 23 dB.
文摘At first, we systematically sum up and deduce the figure of merit of the compensator using linearly chirped fiber gratings. Secondly, we solve the Reccatti differential equation by the Runge Kutta method and calculate the reflectivity and dispersion of the linearly chirped fiber gratings to obtain the figure of merit numericallu.On the other hand, we also discuss the figure of merit under the circumstances of three kinds of coupling coefficients and compare them Finally, we present one kind of perfect design of the compensator using the Gauss coupling function, and simply discuss the method to realize the Gauss coupling function in the fabrication of linearly chirped fiber gratings in this paper.
基金This work was supported by the National 973 Basic Research and Development Program of China (No. 2003CB314901), the National Natural Science Foundation of China (No. 60377026), the National "863" High Technology Project of China (No. 2003AA311070),
文摘A tunable polarization mode dispersion (PMD) compensator based on strain-ckirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped phase mask, fast tuning response time, continuously adjustable, all-fiber based, compact, and cheap.
文摘Many methods have been suggested to reduce dispersion in optical fiber communication. Among these methods, chirped fiber grating (CFG) is a promising scheme. This paper describes a linearly chirped fiber grating with 95% reflectivity and 0.3 nm bandwidth written using a double exposure method with a uniform phase mask. The CFG resonant wavelength is 1554.5 nm and dispersion is 1700 ps/nm. Dispersion compensation in a 10-Gb/s optical transmission system has been demonstrated using this chirped fiber grating. The power penalty induced by the dispersion compensation after 180-km transmission is 1 dB. This is the first report describing dispersion compensation of 180 km at 10-Gb/s optical transmission now-return to zero (NRZ) system in China.
文摘In the high rate optical communication system, the loss and dispersion are important factors which affect the distance and volume of optical communication seriously. With successful researching and applications of EDFA in the system, the loss has not been the most important factor affecting the quality of communication, but the dispersion is now still an important factor which will cause the optical pulse broad. Now the best way to compensate the dispersion of optical communication is using the linearly chirped fiber gratings. In this paper, the couple mode equation of chirped fiber grating to compensate the dispersion is offered and discussed, meanwhile, the problem of the transmitting and reflecting rate is a sitting function. The dispersive coefficient and coupled coefficient of compensator using chirped fiber gratings are also further studied.
文摘-We describe a simple method to generate wavelength-tunable pulses by using a semiconductor optical amplifier (SOA) as an intensity modulator and a gain medium. Wavelength tunable pulses at a repetition rate of 4.8 GHz have been generated.
文摘We demonstrate an adjustable pure dispersion slope compensating-module based on strain-chirped fiber Bragg gratings. The center wavelength of the module is preserved while the pure dispersion slope is tuned.